SHIP Chandler

Alkalinity Control

Boiler Water Treatment Chemicals Concentrated liquid alkaline product for corrosion and Calcium scale control in boilers.  Very usefull Concentrated Alkaline Liquid For Maintaining Ph - To adjust alkalinity

Suitable for Low-pressure boiler systems (0-32 bar) , medium-pressure steam propulsion vessels (32-60 bar). And also suitable to  used for high pressure steam generating systems (60-84 bar).

Alias: 

GREEN AC, Alka active liquid, GC Concentrated Alkaline Liq, GC, Alka Treat, ACT 100 NORCHEM, Alkaline Treatment Liquid 9-512, Eazy Neutralise, ALKATREAT, Nalco 77224, PH Neutraliser, Maxtreat-3004, Nalco 77222, Chem 3004- Alkali, DREW GC, Alkanity Control 25 Ltr

Active Matter: 
58 - 63%
Application: 

RXSOL-50-5002-025 provides the alkaline condition for hardness control to function correctly. Without the correct precipitation and subsequent blow down of hardness salt, scale would form. This would result in restriction in water flow, ineffective heat transfer and local corrosion. The end effect would be an inefficient boiler and ultimately component failure. RXSOL-50-5002-025 also provides the alkaline condition required for corrosion control, by neutralization of acidic gases

Packing Size: 
25.00 Ltr.
Using Procedure: 

For optimum results dose RXSOL-50-5002-025 direct to the boiler with a RXSOL Boiler Water Treatment Dosing unit, or via the bypass pot- feeder installed in the boiler feed line.

Required dosage can be controlled by pH & alkalinity test dosage chart .  

1 milliliter of RXSOL-50-5002-025 concentrated alkaline liquid per ton of distilled water provides 0.5 ppm of lkalinity hydrate.

Low-pressure boiler (up to 28 bars)

Add RXSOL-50-002-025 to 5 litre in feed – water, There is no any specific method can be passed through the recalculating or the main feed pipe into the stream or the hot well tank.

High – Pressure Boiler (28 to 60 bars)

Dissolve the desired volume of RXSOL-50-002-025 to 5 ltr of feed – water, which should then be passed  into the stream or water drum through the chemical pump.

 
Note:- It can also be used as a neutralizing agent following acid cleaning with  descaling materials ( RXSOL-11-1008--DC descaling Liq / RXSOL-54-1008-SA Safe Acid PWD ) 

Note: 

It can also be used as a neutralizing agent following acid cleaning with  descaling materials ( RXSOL-11-1008--DC descaling Liq / RXSOL-54-1008-SA Safe Acid PWD ) 
 

CHARACTERISTICS

  • Alkalinity Balace mechnism to control corrosion.
  • It converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown. Treated as good salt-scale controler product.
  • Compatible with other BOILER chemicals
  • Tested with long and continious running plant for more then 20 Years and easy to apply and use.
  • Avoid contact with any acidic / oily - FAT materials.
Short Description: 
Alkalinity Builder Very usefull Concentrated Alkaline Liquid For Maintaining Ph which protects corrosion, scalling by controlling Calcium scale in water system.

Testing control procedure

  1. Test water sample from the water boiler as described in the direction of the  Alkalinity Test Kit ( p & m Total ) http://www.rxmarine.com/Alkalinity-test-kit
  2. Determine the present alkalinity value expressed as ppm CaCO3 .
  3. Desired level of 100-150 ppm as CaCO3.
  4. A control test for the alkalinity  of the water should be conducted after 3- 6 hours from the application.

CHARACTERISTICS

  • Alkalinity balace mechnism to control corrosion.
  • It converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown. Treated as good salt-scale controler product.
  • Compatible with other BOILER chemicals
  • Tested with long and continious running plant for more then 20 Years and easy to apply and use.
  • Avoid contact with any acidic / oily - FAT materials.

Alkalinity Control works as PH Neutrilizer in Boiler system. Alkalinity control one of important boilere water treatment chemicals which plays very important role by controlling corrosion and solid deposits in boiler system.

Alkalinity control makes sludge in soft form, which can be easily blown down from bottom side of BOILER.

Other valuable Boiler Water Treatment Chemical product :

RXSOL-50-5020-025 Boiler Water Treatment Auto
RXSOL-40-4091-025  Scale and Corrosion Inhibitor for Cooling Water
RXSOL-40-4009-025 MICRO BIOCIDE Cooling Water 
RXSOL-50-5002-025 Alkalinity Control 
RXSOL-40-2000-025 RXSOL 2000 corrosion inhibitor 
RXSOL-40-4009-025 MICRO BIOCIDE Cooling Water
RXSOL-50-5021-025  Hardness Control Liquid

Boiler Water Treatment Chemicals Alkalinity Control manufacturer and supplier in India UAE Oman, Alkalinity Control is most valuable Boiler water Treatment chemicals to converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown. Alkalinity controller boiler chemical manufacturer and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Surat, Gandhidham, Chennai Ennore, Paradip, Nashisk, Pune, Varanashi, Patna, Tata, Ranchi, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, UAE Gulf, Barka, Ruwi Ghala, Muscat Oman, Nairobi, Kenya, Canada

Alkalinity Builder to maintain pH of Boiler WATER. 

Boiler Alkaline Treatment Liquid

Blast Off Alkaline

Benefits of using RXSOL Blast Off Alkaline

  • Exceptional degreasing properties
  • Unrivalled wetting agent to penetrate through organic matter
  • Reduces cleaning time and water usage
  • Low foam formula

 

Blast Off has been specifically designed to meet the difficult cleaning demands of a modern livestock building. Used as a prewash this heavy duty cleaner can be applied via an orchard sprayer or by conventional power wash equipment.

Alias: 

Blast Off, Fleetwash

Application: 

Jet Washer:

  • Add concentrate to washer reservoir
  • Adjust setting to desired dilution rate (1% = 1000:1)
  • Presoak area to be cleaned at 100@1 then adjust the dilution for final clean

Trigger Spray: 

  • Dilute with potable (tap) water (5 ml concentrate in 500 ml trigger = 100:1)
  • Thoroughly wet the surface to be cleaned
  • Use a clean cloth to wipe the area
  • Adjust dilution as necessary for stubborn dirt

Use Neat:

  • Apply with trigger spray and wipe off with wet cloth

Recommended maximum dilution 10%.

Packing Size: 
0.00 Box
Using Procedure: 

Blast Off should be applied via an orchard sprayer or a power washer set at 2000 psi. at a dilution rate of 1:50 - 1:200 depending on level of soiling. It may be applied cold or at temperatures up to 60°C.

Short Description: 
Concentrated alkaline high sudsing. Can be used as both high pressure detergent and low pressure presoak.

Blast Off Alkaline manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Blast Off Alkaline at a competitive price from us. We have ready stock of Blast Off Alkaline in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Drinking Water Additive

A powdered product specially blended as a food grade distilled water additive which when added to Di-water system will provide the necessary minerals which are essential for the human body. Distilled Add has an well balanced essentials to maintain human health is composed and therefore convert distilled water to un-injurious water.

Alias: 

PROMIN ( NORCHEM )

Application: 

Drinking Water Additive is an additives for drinking water onboard vessel.

Packing Size: 
10.00 Kg.PWD
Using Procedure: 

100 grams (100 ppm per metric ton, inject dissolved distilled additive 2 to 3 % of water solution into the drinking tank. For 5 metric ton of drinking water, dissolve 500 grams of Distilled Add to 20 liters of drinking water from tank and feed it into the drinking water tank.

Note: 

SAFETY AND HANDLING

HANDLING :  Handle with care. Store in dry, cool and well ventilated environment.

SAFETY IMMEDIATE ACTIONS

Eye Contact  : Avoid Eye Contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention.

Skin Contact : Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water.

Inhalation : Do not breathe gas/vapors. Otherwise, seek fresh air source at once. Seek medical attention.

Swallowed  : Avoid ingestion. Otherwise, consume considerable quantity of water. Do not induce vomiting. Seek medical attention.

Related Products: 
Short Description: 
A powdered product specially blended as a food grade distilled water additive which when added to Di-water system will provide the necessary minerals which are essential for the human body.

Drinking Water Additive manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Drinking Water Additive at a competitive price from us. We have ready stock of Drinking Water Additive in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

BioSol Cleaner

Very effective cleaner for sticky PU, Gasious,Oily and Greasy mess, Fully active cleaner specially formulated  for the removal of  tuff oily stains residues, with out the need for Scrubbing or Brushing  which can cause mechanical damages to surface and result in poor performance. Field test have shown that this is very gentle with personnel and on metallic colour surface. Should always be used at full strength to obtain maximum benefits.

Alias: 

Bio Solv, SW-3i degreasing fluid industrial strength (trade name Ozzy juice), TOLUSOLV 10, GARDOFILM THINNER 51, XYLOSON 50, SPRAYLAT REDUCER 2100, POWER CLENER

Application: 
  • Unique chemical formulation for cleaning of  graffiti from smooth and rough surfaces
  • Non- toxic.
  • Extends time between cleans.
  • Safe to handle.
  • Effective removal of Heavy DEPOSITS.
  • Can be applied by all normal methods.
  • Formulated to be very cost effective.
  • Does not contain chlorinated hydrocarbons.
  • Can be used on all metals & most painted surfaces.
  • Environmentally friendly.
  • Non-Corrosive.
  • 100% Active.
  • Dries Completely.
  • Does not require special feeding equipment for safe application.
  • Cleans and flushes painting instrument like spray guns, paint lines, mixing tanks, and general purpose paint jobs
  • Removes and cleans wax for surface preparation for paint, glue, and assembly applications
  • very effective to remove   sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass
  • Cleans and degreases a variety of parts, tools, and equipment
  • Removes soot, grease, oil, grime, and diesel fuel
  • Handles tough automotive and transportation cleaning jobs
  • Cleans toner, copier equipment, and machinery including printing presses
  • Clean heavy duty oily and tar deposits
  • Flushes and cleans polyesters, vinyl ester, and epoxy lines
  • Removes polyurethanes, varnishes, enamels, and UV curable coatings
  • Cleans and prepares material surfaces such as metals
Packing Size: 
25.00 Ltr.
Using Procedure: 

Cleans, degreases and disperse heavy grease and oil build up on surfaces and hard to reach areas. Great for engines overhauling, heavy machinery, industrial equipment maintenance and mechanical parts cleaning.

Depends on usage this product  is  designed  into two types ::: 

  • RXSOL-20-2019-025 Concentrate    Heavy duty industrial cleaning job - not suitable for painted or coated surfaces.
  • RXSOL-20-2019-025 Tech                Medium duty industrial cleaning job - suitable for all surfaces.

Suitable for fast and effective cleaning jobs on huge areas with very minimal scrubbing activity and instant residue removal.

Widely applicable at airports and hangars for its non-volatile, non-corrosive and bio-degradable.

Easy and safe to use for electrical and electronic small sensitive components with hard to reach area. Solutions are non-hazardous and non-abrasive

Machine maintenance and overhauling, tools restoration.

Note: 

 

  • Cleans and flushes paint spray guns, paint lines, mixing tanks, and general purpose paint jobs
  • Removes graffiti from smooth and rough surfaces
  • Removes and cleans wax for surface preparation for paint, glue, and assembly applications
  • Removes vinyl graphics from boats, signs, trucks, and glass
  • Cleans and degreases a variety of parts, tools, and equipment
  • Removes soot, grease, oil, grime, and diesel fuel
  • Handles tough automotive and transportation cleaning jobs
  • Cleans and removes adhesive caulking and bedding compounds
  • Cleans glue residues, resin, and hardener
  • Cleans toner, copier equipment, and machinery including printing presses
  • Removes tar and sap
  • Flushes and cleans polyesters, vinyl ester, and epoxy lines
  • Removes polyurethanes, varnishes, enamels, and UV curable coatings
  • Cleans and prepares material surfaces such as metals
Short Description: 
Very effective cleaner for sticky Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues, with out the need for Scrubbing or Brushing which can cause mechanical damages to surface and result in poor

BioSol Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of BioSol Cleaner at a competitive price from us. We have ready stock of BioSol Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Water Soluble Degreaser

Metal Clean Britte

Metals Clean Britee is a useful product in maintenance and cleaning sector. In the marine shipping industry, Metals Clean Britte is used as a rust remover. Largest seller and supplier of Metal clean Britte in INDIA and Middle East.

Rust Dissolving Formula is called METAL CLEAN BRITEE

Alias: 

METAL Bright, P3 T1166, NALCO, Formula 4, ETR 300, Eazy RSR, AlfaPhos, RUST SCALE REMOVER DETERGENT TYPE, IMPA Code: 551081

Application: 

MARINE - Rust Stain cleaner Metal Clean Britte

RXSOL-16-1011-025 ( Metals Clean Brittee ) can be used as a spot cleaner after cleaning fats and fatty acids, can be used on painted surface

A superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent,   solubilizer  and inhibited phosphoric acid with ionic and non ionic emulsifier.

For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.
 

Packing Size: 
25.00 Ltr.
Using Procedure: 

FOR TANK CLEANING

RECOMMENDATION : 0.2% TO 100%
 

FIELD:-
specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner.

Procedure for Use :-

  • RXSOL-16-1011-025 is highly concentrate
  • Dilute in water (always use a plastic jar and RXSOL-16-1011-025 should be added to  water  never add water to (RXSOL-16-1011-025.)
  • The surface should be sound clean and free of oil, grease, dirt etc.
  • Diluted materials apply on the rusted area for 15 to 20 minutes then wash off with water repeat if necessary.
    (For stubborn rusted stains.)

NOTE:-
For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metal Clean Bright- Rx and allow to dry. The second wash may be necessary. The surface should have a grey/white appearance when the Metal Clean Bright- Rx is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.For removal of rust stains on painted surfaces and wood, Metal Clean Bright Rx should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.

Spraying Direction:-
Using an empty/clean 210-litre drum, fill with 190 litres of fresh water and add 20 litres of Metal Clean Bright   This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas.  Once spraying is completed, wait 20-30 minutes and fresh water rinses with lots of water if possible use Butterworth machines for a more efficient result.  This method can be used in stainless tanks to “freshen up” the look of the stainless materials.  Make sure to rinse the tank very well, as residual detergent within the Metal Clean Bright will show up in a Wall Wash.
Injection – Not suitable.

Re-circulation:
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through Butterworth machines for 3 x 45 minutes drops minimum.  When using fixed machine recirculate for a minimum of 3 cycles.  Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pump stack drain cock.  After the hot wash, the tank must be rinsed with fresh water and dried.

* If the mixture is allowed to overheat, it will soften epoxy/phenolic coating.
* Use a strainer at the pump stack when circulating any solution.

  Tank Lining – Stainless / Epoxy, Phenolic

Note: 

Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner.

When cleaning aluminium, brass & copper flush with water upon completion of cleaning immediately
Warning : In case of contact with skin, wash immediately with plenty of water. Use chemical resistance PVC gloves for skin contact and also use face mask for eye and face protection.

Read the Material Safety Data Sheet before using this products.

Short Description: 
Rust and Metal Tarnish Remover Specially designed for removal of rust from any steel surface area also acts as rust proofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.

Metal Clean Britte manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Metal Clean Britte at a competitive price from us. We have ready stock of Metal Clean Britte in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Rust cleaning chemicals for Marine and Shipping oil field industries.

PROPYLENE GLYCOL IP food grade

Propylene Glycol supplier and Exporter.

Alias: 

Popsicles freezing fluid, Anti freeze for Ice Cream Productction

Application: 

Propylene glycol, also called 1,2-propanediol or propane-1,2-diol, is an organic compound with formula C3H8O2

Melting point: -59 °C

Density: 1.04 g/cm³

Boiling point: 188.2 °C

Formula: C3H8O2

Molar mass: 76.09 g/mol

IUPAC ID: propane-1,2-diol

Packing Size: 
25.00 Ltr.
Short Description: 
Propylene Glycol also called 1,2-propanediol or propane-1,2-diol, is an organic compound with formula C3H8O2

General Information

Form.............................................................Fluid

Colour .........................................................Colourless

Odour ..........................................................Nearly odourless

Change in condition

Melting point/Melting..................................-68°C

Range 

Flash point...................................................> 100°C

Ignition temperature ..................................371°C

Danger of explosion...................................Product does not present an explosion hazard.

Explosion limits.

Lower ........................................................2.6 Vol %

Upper ........................................................12.6 Vol %

Vapour pressure at.................................... 20°C 0.11 hPa

Density at 20°C .........................................1.0362 g/cm³

Solubility in / Miscibility with water ::: ........Fully miscible.

pH-value (- g/l) ......................................... Neutral

ViscosityDynamic at 25°C  .......................46 mPas

#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Question : What is the CAS No of Propylene Glycol?
Ans : Propylene Glycol CAS number  57-55-6.

Mono Propylene Glycol MPG exporter and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Fujairah, Dubai, Ajman, Abudhabi, Muscat Barka Sohar, Oman, Canada

Popsicle machine freezes ice-pops in few minutes using a tank of super-chilled Propylene Glycol + Water.  RXSOL Propylene Glycol is pure and suitable to use in ICE freezing machine.

 

Due to the presence of Propylene Glycol in Popsicle machine freezing takes place so quickly, the ice-crystals that are formed during the process are much smaller than when I used to freeze down overnight in a commercial freezer. 

Popsicles freezing fluid

 

In early stage mixture of water and salt to freeze the molds in popsicle machines.which is very corrosive as salt destroyed many parts of the machine and its surroundings.

 

Then Alcohol replaces the brine, but it is highly flammable.

Modern science replaces flammable and corrosive materials with propylene glycol. This product has the disadvantage of needing to be mixed with water and ends up being too viscous at low temperatures, making it difficult to flow.

 

NOTE : Time to time Glycol fluids have tendency to absorb water from the environment and from molds (which are dipped in hot water for detaching process, in conventional machines). The increase of water in the freezing fluid significantly slows the popsicles solidification.

Popsicles Freezing fluid

ENGINE SCALE Guard NB

Engine Water Treatment Chemicals Powder for Diesel Engine, RXSOL-40-4002-020 is a dry powder, nitrite / borate based compound with unique formulation with organic corrosion inhibitors and anti-scalants for use in closed cooling water systems.

Diesel Engine Water Treatment - DEWT Scale Guard NB is a non-chromate powdered product incorporated with corrosion inhibitors specially designed to inhibit and prevent corrosion in diesel cooling waters systems

Alias: 

DEWT COOLING WATER TREATMENT, Diesel Engine Scale Guard NB engine water treatment, NITRITE BORATE BASED CORROSION INHIBITOR. DEWT NC, Diesel engine Corrosion Inhibitor

Active Matter: 
98 - 99%
Application: 

Engine Scale Guard DEWT Guard NB Prevents corrosion and scale formation in closed cooling water systems of internal combustion engines, compressors, diesel generators. Used as a cooling water additive for ships’ diesel engines

Packing Size: 
20.00 Kg.PWD
Using Procedure: 

Refer to technical datasheet.

Short Description: 
Diesel Engine Scale Guard NB engine water treatment chemicals with unique formulation of organic corrosion inhibitors and anti-scalants for use in closed cooling water systems.

Diesel Engine Water Treatment DEWT Guard NB exporter and supplier in Mumbai, Gandhidham, Sikka Jamnagar, Mundra, Kandla, Chennai Ennore, Visakhapatnam, Gangavaram, Hazira Surat, Kolkata, Haldia, Paradip, Ajman, Abudhabi, Dubai, Sharjah, Barka Oman Muscat, Canada, Nairobi Kenya Africa, Sudan, Yemen

DEWT Cooling water additive for ships diesel engines Sodium Nitrite, Borate mix corrosion inhibitor

Calcium Chloride Anhydrous

Packing Size: 
25.00 Kg.PWD
Related Products: 
Short Description: 
Calcium Chloride Anhydrous

Calcium Chloride Anhydrous manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Calcium Chloride Anhydrous at a competitive price from us. We have ready stock of Calcium Chloride Anhydrous in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Coliform Test Kit PUT-n-SEE

Water contaminated with bacteria is a major cause of water born diseases in humans enteric diseases are caused by these tiny meanaces.Coliform test kit water from all kinds of sources viz taps fiters purifiers coolers. storage tanks rivers pound springs etc this extremely simply and convenient test can be carried out by anybody any where i.e. homes offices,factories shops banks, hospitals,school,etc.

Alias: 

Bactaslyde Water Testing Kit MkRef: Code BS101, Cheknsee water Testing Kit, IDEXX Colilert Test Kit, Colilert 18, Bactoscope Test Kit

Active Matter: 
Complete Set
Application: 

Are Coliform Bacteria Harmful?

Most coliform bacteria do not cause disease. However, some rare strains of E. coli, particularly the strain 0157:H7, can cause serious illness. Recent outbreaks of disease caused by E. coli 0157:H7 have generated much public concern about this organism. E. coli 0157:H7 has been found in cattle, chickens, pigs, and sheep. Most of the reported human cases have been due to eating under cooked hamburger. Cases of E. coli 0157:H7 caused by contaminated drinking water supplies are rare.

Coliform Testing

Testing for bacteria is the only reliable way to know if your water is safe. You cannot tell by the look, taste, or smell of the water if disease-causing organisms are in it.  If you have experienced bacteria problems in the past, it is recommended that you test your well more frequently.

When Should I Test for well ?

Late spring or early summer are the best times to test your well, since coliform contamination is most likely to show up during wet weather. Whether your test results are positive or negative. The more samples you have tested, the more confident you can be about the quality of the water you are drinking.

What do the Results Mean?

If coliform bacteria are present in your drinking water, your risk of contracting a water-borne illness is increased. Although total coliforms can come from sources other than fecal matter, a positive total coliform sample should be considered an indication of pollution in your well. Positive fecal coliform results, especially positive E. Coli results, should be considered indication of fecal pollution in your well.

What Should be done if Coliform Bacteria are Detected in tank?

When coliforms have been detected, repairs or modifications of the water system may be required. Boiling the water is advised until disinfection and retesting can confirm that contamination has been eliminated. A defective well is often the cause when coliform bacteria are found in well water.

Packing Size: 
1.00 Full SET
Using Procedure: 

Refer IMAGE stepwise...

Note: 

Very simple to use, No any extra qualification and help required.

Short Description: 
Water contaminated with bacteria is a major cause of water born diseases in humans enteric diseases are caused by these tiny meanaces.Coliform test kit water from all kinds of sources viz taps fiters purifiers coolers. storage tanks rivers pound springs

For testing waste and effluent waters for fecal coliforms
Key Applications
Beer
Bottled Water
Cider
Dairy
Environmental Analysis
Environmental Monitoring
Food and Beverage
Soft Drink
Wine

Bacteria Testt Water Test Kit manufacturer and supplier in Fujairah, Dubai, Abudhabi, Ajman, Sharjah UAE Middle East, Ruwi Barka Ghala Muscat Oman, Mumbai, Kandla Gandhidham, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai, Gangavaram, Mumbai, Mundra Hazira , Surat, Ennore, Sudan, Ruwi, Kenya Nairobi

Bacteria Test in water

COAL REMOVER rx hold 25 Ltr

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.

Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.

Alias: 

Coal Cleaning Detergent

Application: 

• Use cold - no heating required.
• Easily dissolves deposits containing carbon , polymer resin etc.
• Economical to use.
• Scraping not required.
• Non- flammable.
• Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
• Cleans oil side of fuel heaters, oil coolers, etc.
• Can be used for cleaning of : -Fuel Oil Filters - Pistons - Piston rings - Valve cage

Packing Size: 
25.00 Ltr.
Using Procedure: 

Directions for Use and Dose Rates

Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.

Cleaning Procedure

Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8–10 square meters.

NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

Note:-
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
• Stubborn deposits should be scrubbed to assist the cleaning operation.

Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Note: 

   **Read the Material Safety Data Sheet before using this product.**

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020,  Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

 

 

Ship PolyCoat SPC RXSOL HOLD BLOCK  ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

 

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

 

COAL REMOVER rx hold  ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

 

 

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful st

Short Description: 
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

Coal remover chemical ready stock in Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai, Fujairah, Muscat, Oman, Kenya, Uganda, Canada. Buy the highly efficient coal removing chemical from coal remover manufacturers, suppliers and exporters.

Ready stock of Coal Remover cargo cleaner in Mumbai, Kandla, Kolkata, Vishakhapatnam, Tuticorin, Chennai, India. Coal Remover liquid chemical ready stock in Fujairah, Muscat Barka, Oman, Kenya, Uganda, Africa, Canada.

Ship Hold Coal Cleaning chemicals

stock-clearance.png