Search

SHIP Chandler

Chembreak Emulsion Sludge Breaker

Specialized to break emulsion or slop OIL and Water, RXSOL-20-2006-020  has the unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker "C" cleaners.

Alias: 

Ameroid OWS, Breaker/WWT, Chembreak, Careclean Quick Spilt, Desludger Chemical, Emulsion Breaker, Reverse Emulsion Breaker, Chembreak, Sludge Breaker, Aqualife CO 4500 MWS-C

Active Matter: 
85 - 88 %
Application: 

Ideally suited for slop tanks. Also recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. Low toxicity, non - corrosive. Highly effective, economical solvent cleaner.

Packing Size: 
25.00 Ltr.
Using Procedure: 

For light contamination dilute with water in the ratio 1:20 . For medium contamination dilute with a petrosolvent. And for heavy contamination concentrated RXSOL-20-2006-025  is suggested.

Note: 

For Engine Room & Cargo Tank Cleaner

Product Description:- RXSOL-20-2006-025 is an all purpose degreaser emulsifiers, It is an excellent blend of powerful solvent base and emulsifying inorganic products .Specially designed  for engine room and cargo  tank cleaning .Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion  to separate oil and water. This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .

Dosage:- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL CB 2006 is suggested to use.

Procedure of use :- RXSOL-20-2006-025 is  recommended for local cleaning & degreasing of engine rooms, bilges & tank  tops. It may be applied by brush, spray, immersion, soaking, or  any  other  conventional  means.RXSOL-20-2006-025 is used  neat. Allow a residence time of at least 20- 45 minutes where  possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed  to separate  in a holding tank for atleast 3-5 hours before passing through an oily water separator.

Related Products: 
Demulsifier Emulsion Breaker
Enviro Soft Cleaner
Accelerage Sludge Acceleration Agent 25 Ltr
Gas Turbine Compressor Cleaning Fluid RXSOL 27
Food Grade Disinfectant ORG TR 50 - 25 ltr
Oil water Separator 25 Ltr
Accelerage Sludge Acceleration Agent 210 Ltr
Video Links: 
Chembreak Emulsion Sludge Breaker
Article News: 
Marine Chemical Information
Only 100 ml Sea Power Cleaner for 100 Ltr water is sufficient to clean Oily Tanks
Short Description: 
Unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker "C" cleaners.

Chembreak Emulsion Sludge Breaker manufacturer and supplier in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Gangavaram, Ennore, Haldia, Paradip, Fujairah, Abudhabi, Sharjah, Dubai, GULF UAE, Ruwi, Barka, Muscat Oman, Yemen, Sudan, Nairobi Kenya

Sludge Oil Water Quick Separator

  • 9702 reads

Floor Cleaner Soft Conc Low Foam

Alias: 

Soft Surface Floor Cleaner Concentrate, Solvent-based and fast drying floor cleaner

Application: 

Uses dilutions based on CLEANING nature are as follows.  ::: --
Heavy soil - Dilute 1 part concentrate with 55 parts water. 
Medium soil -1 part concentrate with 84 parts water. 
Light soil - 1 part concentrate with 168 parts water. 
 

Recommended Dilution for machine manual use : 

Machine: 10ml in 1Ltr of plain water for machine scrubbing

Manual: 20ml in 1Ltr of plain water for scrubbing and mopping.

Apply the diluted Verus Soft Surface Cleaner with mop. Scrub if necessary and rinse off with plain water.

 

For use in federally inspected meat and poultry plants.  Classification A-4 as a wall and floor cleaner for use in all departments.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Removes stains and dirt effectively.

Does not contain any harsh chemicals, hence will not damage the floor.

Leaves surface stain free.

Leaves the surface with pleasant fresh fragrance.

Note: 

Do not use this product on waxed floors, the degreasing and cleaning quality of this product will dull or remove wax.  We recommend using this product through the Lyn Distributing Quick Fill System.  This systems will fill ride on scrubbers (100 to 200 gallon tanks) fast, save down time.

Related Products: 
Cement Floor Cleaner
Floor carpet Adhesive remover
Floor and Engine Parts Degreaser ( powder )
Safety Accessories: 
Goggle
Hand Gloves Chemical resistance
Short Description: 
Floor cleaner in concentrated form for use on every surface where water is permissible

Floor Cleaner Soft Conc Low Foam manufacturer and supplier in Mumbai, Gandhihdham, Surat, Vizag Visakhapatnam, Chennao Ennore, Kolkata Haldia, Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Muscat Oman

Floor Cleaner Concentrate and soft with Low Foaming

OXYGEN CLEANER

Most suitable product for oxygen cleaning and degreasing operations. Oxygen Cleaner is highly concentrated product  which can be diluted with water before use.

Active Matter: 
48-50
Packing Size: 
210.00 Ltr.
Using Procedure: 

Oxygen cleaner mostely use after 25% DILUTION with water solution. But for general use its uses is economical 1 g/L can be used.

Fast, intense cleaning action surpasses other cleaners' performances Leaves cleaned surfaces slightly antistatic 

Note: 

The most advantage of RXSOL brand Oxygen Cleaner is this product is Non-toxic, Non-flammable Contains no phosphates, acids, silicones and is non-butyl. Due to that this product is Safe to use on all kinds of metals and plastics Biodegradable Easily removes oil, grease and dirt from surfaces Splits oils rather then emulsifying them, allowing the oils to be removed and the cleaner re-used. 

Related Products: 
Oxygen Controller Scavenger
Oxygen Gas Cylinder
Oxygen Treat Scavanger PWD 25 Kg
Short Description: 
Most suitable product for oxygen cleaning and degreasing operations. Oxygen Cleaner is highly concentrated product which can be diluted with water before use.

The chemical reactions that take place when using RXSOL Oxygen Cleaner completely disintegrate these linear carbon chains. Both  allowing TRAMOS Oxygen Cleaner to work very efficiently at low temperatures. T This pH allows RXSOL Oxygen Cleaner to clean solid washable surfaces without marring the substrate. The buffering of this product allows it to have a , as used.

Oxygen Cleaner Manufacturer and supplier in Kolkata, Mumbai, Chennai, Gandhidham, Visakhapatnam, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Oman, Kennya, Mombasa, Nairobi Uganda

Oxygen cleaner and degreaser

  • 3111 reads

Copper Sulfate for Passivation Test

The copper sulfate test is used to detect the presence of metallic iron and iron oxide on the surface of materials.

Question - What solution strength is needed to copper sulfate solution can be used to determine if a metal is stainless steel or just steel ? 
Answer    - Copper sulfate (CuSO4*5H2O) + H2SO4 (anywhere from 1% to 50% is specified in various test methods).

Alias: 

Copper Sulfate crystal

Application: 

How does copper sulfate test for passivation work?

ANSWER : Chromium and nickel will not be replaced with the Copper sulfate test solution (which also contains sulfuric acid), only the Fe or other less noble metals. If there is free iron on the surface it will be replaced by the copper, forming the distinctive copper color on the surface in this 6 minute test. Of course, this test should only be used on austenitic stainless steel. Some people use it on other grades, but you can get false failures.

 

 

Click here for PASSIVATING LIQUID technical information , to know Other testing methods for PASSIVATION , Passivation Method

Packing Size: 
1.00 No
Using Procedure: 

Spray the surface with a solution of copper sulfate in water. If free iron is present, a copper film will form. In this test, the chemical reaction is:

 Fe + CuSO4 = FeSO4 + Cu
The copper film is immediately visible.
 

Copper sulphate test: a galvanic type test in which the more noble copper plays upon less noble iron particles but not on SS.  Patches of copper sulphate shows a poorly passivated surface. Passivated parts are immersed in a Copper Sulfate solution for five minutes, rinsed and visually examined. Any copper (pink) color indicates the presence of free iron and the test is considered unacceptable.

Ferroxyl test: causes coloured iron compounds to appear as specks.

Article News: 
DETECTING FREE IRON
Removal of IRON OXIDE RESIDUE from the stainless steel surface
How to determine copper in industrial water
Short Description: 
CRYSTAL pure Detect the presence of metallic iron and iron oxide. Chromium and nickel will not be replaced with the Copper sulfate test solution, forming the distinctive copper color on the surface in this 6 minute test.

#Passivation_Test
#CopperSulfate_PassivationTest
#copperSULFATE_muscatDUBAI

Copper Sulfate for Passivation Test manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Copper Sulfate for Passivation Test at a competitive price from us. We have ready stock of Copper Sulfate for Passivation Test in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Laboratory Grade pure Copper Sulphate Crystal

FAQ: 
Why Ferroxyl Test Kit?
Why Iron Free surface required?

RXSOL 2000 Corrosion Inhibitor

Alias: 

Rodine 231, Rodine 234, Rodine 244, INDION 5547, RXSOL2000 corrosion Inhibitor 10 Ltr

Active Matter: 
63-72
Application: 

Application: All types of Engine Jackets, Radiator and Engine coolant.
The stable oxide film that is formed by RXSOL 2000-II prevents corrosion caused by electrolytic action between dissimilar metals used in the system . RXSOL 2000  has been field tested and found to have no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. Rxsol 2000-II  incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Advatages: -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL 2000 Ltr is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product is accidentally overdosed, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected. protect cast iron diesel engine cooling systems.

2. Improves generating cooling efficiency by maintaining a clean heat transfer by protect against sludge and mineral scale formation.

3. Corrosion protection by using superior corrosion inhibitor.

4. Reduced maintenance and down time

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket , and ‘O’rings.etc.)

7. Prevents over heating Effective against liner pitting and cavitation erosion.

NOTE :::
•Protects both ferrous and non-ferrous metals from oxygen & corrosion.
•Compatible with most coolants and anti frizzles.
•Non staining.

Packing Size: 
10.00 Ltr.
Using Procedure: 

Initial dosage for an untreated system is 9 litres of RXSOL 2000 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL 2000 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval .

Note: 

In cases where systems are contaminated with oil and/or scale they should be cleaned before starting to apply RXSOL 2000 .There are suitable RXSOL BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL 2000 and descaling by using RXSOL 2000.

SPECIFICATION / HANDLING
Color                           : Odour Pink/ red (Colour changes of the product can not be excluded the effectively will however not impaired.)
Sp. Gravity                  : 1.1 to 1.25
pH                                : Alkaline (11.3 – 11.5)

RXSOL-2000 is an alkaline product & should be handled like other chemical Avoid contact with Eyes, Skin ,in case of contact ,wash with copious amounts of water immediately.
Freezing Point - 17 0 c
Nitrite (as PPM NO2)       0                   100-200      300-600        700-900      1100-1300      1440-2400
RXSOL 2000 /1000L      13.0               11.3              8-10               5-7               1.5-3.5              0

METHOD OF USE
1. Properly clean the system with water and alkaline liquid, if necessary.
2. Add 0 .15-1.5 % of Rxsol -2000 in system or recommended Nitrite level 1400 – 2500 ppm can be measured and controlled by any standard RXSOL test kit for Nitrite, Chloride test also helps to detect excess contamination to maintain accepted levels . When the product is dosed as recommended limit By buffering action of RXSOL - 2000 , pH should be maintained between 8.3 and 10 by the treatment.

NOTE ::: Engine cooling system should be drained, flushed and if necessary chemically cleaned with (Aluminum & Metal Cleaner) for to remove old rust and scale deposits, before treatment with RXSOL 2000.

Related Products: 
ROCCOR NB Corrosion Scale Inhibitor Liquid
Antifreeze Plus Corrosion Scale Inhibitor 25 Ltrs
Article News: 
Oil Filed Maintenance Chemicals
Short Description: 
Engine Corrosion Inhibitors and anti scalant which is effective against liner pitting and cavitation erosion. It prevents over heating of engine and thus reducing chances of shut down. It is non-harmful to radiator or heater connecting hoses, diesel liner seals and 'O' label rings.

Why RXSOL 2000 Corrosion Inhibitor and Antiscalant?

 

 

RXSOL 2000 is specialized formulation of corrosion inhibitor to protect cast iron diesel engine cooling systems

RXSOL 2000 Contains Antiscalant to stop scale and sludge formation 

Keep engine free from SCALE and corrosion which Prevents Engine overheating

RUST formation and Scale deposition damaging the metal surface by pitting and corrosion, RXSOL 2000 helps against corrosion and scale

RXSOL 2000 is compatible with  hoses, diesel liner seals and ‘O’rings

Most popular Corrosion Inhibitor and antiscalant for CAST IRON DIESEL ENGINE cooling system.

 

Engine Cooling system corrosion inhibitor and antiscalant manufacturer and supplier in India, UAE Middle East, Muscat Oman, Kenya Nairobi, Sudan, YEMEN

RXSOL 2000 Antiscalant Corrosion Inhibitor for Engine Cooling System manufacturer exporter and supplier in India, UAE Middle East, Muscat Oman, Sudan, Yemen, Mumbai MIDC, Hazira Surat, Gandhidham, Mundra Gujrat, Visakhapatnam, Chennai Ennore, Kolkata Haldia, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Barka Sohar, Muscat

Diesel Engine Corrosion Inhibitor

Chloride Test Reagent TK - 3

REAGENT for Chloride :

Alias: 

Chloride Reagent 1, Chloride A

Application: 

PROCEDURE for test ( STEP WISE ):

  1. Measure 15 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER
  2. Add 1-2 drops of  RXSOL TK1 and mix with the stirring rod , If  sample turns red / PINK then follows 3rd step otherwise if sample remains colourless proceed to step 4.
  3. Add RXSOL TK2  drop by drop , mixing with the stirring rod until colour just disappears.
  4. Add 3 drops of RXSOL TK3 and mix with stirring rod , the sample will turn YELLOW.
  5. AddRXSOL TK4 carefully by counting drop by drop and mixing throughly until a light reddish / pink / brown colour develop.
Packing Size: 
50.00 slan
Using Procedure: 

Pl. click here to get more details of using procedure : www.rxmarine.com/chloride-test-kit

Short Description: 
Add 3 drops of RXSOL TK3 and mix with stirring rod , the sample will turn YELLOW.

Chloride Test Reagent TK - 3 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Chloride Test Reagent TK - 3 at a competitive price from us. We have ready stock of Chloride Test Reagent TK - 3 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

ACQUA Tuff High Foam CLEANER

ALKAATuff High Foam CLEANER liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is -  Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

Alias: 

High Foam ship hold cleaning detergent, CarecleanWAF, Waterbased Alkaline Foam, ALKAATuff High Foam CLEANER, Alkaline Detergent Heavy Duty 220 Kg Liq

Active Matter: 
45-50
Application: 

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds ALKAATuff High Foam CLEANER plays very important role in washing down with use of chemicals.  ALKAATuff High Foam CLEANER classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Packing Size: 
220.00 Ltr.
Using Procedure: 

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
 

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using ALKAATUFF High Foam CLEANER incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  ALKAATuff High Foam CLEANER over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the ALKAATuff High Foam CLEANER has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the ALKAATUFF High Foam CLEANER thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of ALKAATuff High Foam CLEANER substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of ALKAATUFF High Foam CLEANER in correct dosages is half the job done.

General Cleaning :- ALKAATuff High Foam CLEANER can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination ALKAATuff High Foam CLEANER should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of ALKAATUFF High Foam CLEANER to a bucket of water. The ALKAATuff High Foam CLEANER solution can be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the ALKAATuff High Foam CLEANER solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, ALKAATuff High Foam CLEANER is not recommended for washing machines. 

20-50 % with fresh water .             Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition                    Use Undiluted from to 20-50% diluted with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.

Note: 

ALKAATUFF High Foam CLEANER is absolutely free along with the purchase of Slip Barrier Coat - Hold block materials. ALKAATUFF High foam Free 1000 Ltr against 1000 Ltrs purchase of Slip Barrier Coat Plus at our Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf.

 

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily  matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

 

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times. 

 

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

 

 

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

 

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

 

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

 

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Related Products: 
ACQUA Tuff High Foam CLEANER
Cement Remover RX Hold
COAL REMOVER
Lime Remover HD 25 Ltrs
Slip Barrier Coats HOLD BLOCK
Hold Wash Concentrate RX
Holdbright Plus
RX Tuff High Foam conc.
Hold Wash Concentrate RX
ALKAATUFF DETERGENT
Enviro Rigs Cleaner
Hydrochloric Acid 250 Kg
Safety Accessories: 
Hand Gloves Chemical resistance
Goggle Chemical Protective
Burlup - Burlap
Sodium Hypo Chlorite 10-12.5%
Article News: 
Alkaatuff marine hold cleaning and degreasing chemicals
Alkaatuff MSDS
ALKAATUFF MSDS
ALKAATUFF High Foam ship hold cleaning detergent
Differences between ALKAATUFF High Foam and ALKAATUFF
ALKAATUFF high foam application and cleaning method and manual
Alkaatuff Cleaning action
ALKAATUFF High Foam Ship Hold cleaning detergent
How to clean Carbon deposits from Ship hold Bulk carrier?
ALKAATUFF High Dense Foam to clean ship hold vertical surface
ALKAATUFF High Foam General description
Iron Ore cleaning detergent for ship hold cargo
ALKAATUFF High Foam is a cargo hold cleaning chemicals
Alkaatuff good foaming qualities
Short Description: 
Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah
Information: 

Alkaatuff High foam is specialized ship hold bulk carrier cleaning chemicals. Our group team also providing direct online support for cleaning tips during Hold cleaning of ships. Alkaatuff High Foam MSDS and Using procedure also available online to our customer. We are one of largest ship hold cleaning chemicals supplier in India - Middle East which also covers Lime Remover, Coal Remover, Slip barrier coat, Hold Wash and many more...Pl. click here ( http://www.rxmarine.com/HoldSolution-22 ) to know our various range of Hold Cleaning products...

ALKAATuff High Foam CLEANER for bulk carrier cargo hold cleaning alkaline detergent, Other then ALKAATuff High Foam CLEANER cargo hold cleaning chemicals lime washing chemicals for cargo holds and pet coke cargo hold washing detergent also popular for specificed lime and and pet cargo. We are also keeping ready stock of cement hold cleaning chemicals, Hold Block - Slip polymer Barrier Coat, Hold Wash etc...
 

Suitable hold cleaner plays important role to clean ship hold on time. Slection of cleaner always be wise decision to save time and perfectness on cleaning.  ALKAATUFF High Foam HOLD CLEANING ALKALINE DETERGENT - Alkatuff is one of popular high foam alkaline cleaner which is also treated as versatile cleaner as well as plays role to neutralize acidic residue created by cargo on contact with moisture. Cement remover is also specialized product for cement wash, coal remover, lime remover, Bilge coat, Gypsum remover, PCS hold clean, alkaline cleaner, Muriatic Acid, Sodium Hypo Chlorite, Pet coke remover, Slip polymer Barrier Coat Hold Block etc... Some times we observed that presence of Sea voyage cleaner on board also plays important role to degrease oil and soiled mass from surface. And Metal clean bright helps to remove rust from open hold surface area and also effective to dissolve rust stain from painted surface.
 

Cargo Product 

Product Nature

Characteristics

Sulphur

Alkaline Cleaner

Alkaline Cleaner, ALKAATUFF, Holdbrite

Anthracite - Hard Coal 

Alkaline Cleaner

ALKAATUFF High Foam

Bauxite

Alkaline Cleaner

ALKAATUFF High Foam

Bentonite

Alkaline Cleaner

ALKAATUFF High Foam

Chrome Ore

Alkaline Cleaner

Alkaline Cleaner, ALKAATUFF

Clay

Alkaline Cleaner

Alkaline Cleaner, ALKAATUFF

Dolomite

Alkaline Cleaner

ALKAATUFF High Foam
Fluorspar - Calcium Fluoride, Fluorite Alkaline non foaming cleaner ALKAATUFF High Foam
Gypsum - Calsium Sulfate, Mineral White Acidic Cleaner Metal CLEAN Bright
Iron Ore Pellets Acidic Cleaner Metal CLEAN Bright
Lime Sand, Lime Stone, Calcium Carbonate Acidic Cleaner Metal CLEAN Bright
Magnesite Magnesium Carboante Acidic Cleaner Metal CLEAN Bright
Magnetite IRON BLACK Alkaline Cleaner ALKAATUFF High Foam
Magnese Ore Alkaline Cleaner ALKAATUFF High Foam
Zinc Alkaline Cleaner ALKAATUFF High Foam
Lead Alkaline Cleaner ALKAATUFF High Foam
Copper Alkaline Cleaner ALKAATUFF High Foam
Pyrite Iron Disulfide, Iron Pyrite, Pyrox Alkaline Cleaner ALKAATUFF High Foam
Phosphate Rock Alkaline Cleaner ALKAATUFF High Foam
Quartz, Silicone Dioxide, stone Alkaline Cleaner ALKAATUFF High Foam
Talk, Magnesium Talc, Soapstone Alkaline Cleaner ALKAATUFF High Foam
Vanadium Ore Alkaline Cleaner ALKAATUFF High Foam
Aluminum Dross Alkaline non foaming cleaner ALKAATUFF High Foam
Ferro Alloys Acidic Cleaner Metal CLEAN Bright
Granulated Slag Acidic Cleaner Metal CLEAN Bright
Hot Briquetted Iron HBI Acidic Cleaner Metal CLEAN Bright
Magnesite, Magnesium Oxide Acidic Cleaner Metal CLEAN Bright
Millscale Iron ORE Acidic Cleaner Metal CLEAN Bright
PIG IRON Acidic Cleaner Metal CLEAN Bright
Zinc Ashes Alkaline foaming cleaner ALKAATUFF High Foam
Zinc Dross Alkaline foaming cleaner ALKAATUFF High Foam
Zinc Residues Alkaline foaming cleaner ALKAATUFF High Foam
Brown Coal Briquettes, Lignite Brown Coal briquetties Alkaline Cleaner ALKAATUFF High Foam
Calcined Petroleum Coke Alkaline Cleaner ALKAATUFF High Foam
Coal, COKE, Petcoke - Petroleum coke Alkaline Cleaner ALKAATUFF High Foam
Castor Beans Alkaline Cleaner ALKAATUFF High Foam
Copra Dry Alkaline Cleaner ALKAATUFF High Foam
Fish Meal Alkaline Cleaner ALKAATUFF High Foam
Peat Moss Alkaline Cleaner ALKAATUFF High Foam
Seed Cake, Solvent Extracted Alkaline Cleaner ALKAATUFF High Foam
Soya Beans Alkaline Cleaner ALKAATUFF High Foam
Sunflower Seed Alkaline Cleaner ALKAATUFF High Foam
Wheat Alkaline Cleaner ALKAATUFF High Foam
CEMENT Acidic Cleaner Cement Remover, Metal clean Bright, Descaing
Cement Clinker Acidic Cleaner Cement Remover, Metal clean Bright, Descaing
Fly Ash Alkaline Cleaner ALKAATUFF High Foam
     
 

Cargo Hold Cleaner, Bulk Hold cleaning etergent, Chemical Agent for hold cleaning, Hold Cleaning Kits detergent

Importance of Alkaleen Safety Liquid / ALKAATuff High Foam CLEANER Cargo hold cleaner for coal and pet coke:

Alkaatuff High foam and ALKAATuff High Foam CLEANER / Alkaleen Safety Liquid cleaner is most common marine cleaning chemicals for cargo hold cleaning after coal and pet coke. 

Two Major Benefit of cleaning of Pet Coke:- 

Pet coke residue contains oil content, which is creating more difficulties during the cleaning operation. ALKAATuff High Foam CLEANER high foam and one of our specialized product called Alkaleen Safety Liquid which is absolutely non-hazardous and biodegradable cleaner. 

Petcokes also have sulphur content which is the main cause of corrosion due to its electrochemical corrosion mechanism. In presence of moisture and sulfur metal surface charges as anodic and damaging the hold paint due to electrical ion charges. Here presence of Alkaleen Safety Liquid / ALKAATuff High Foam CLEANER increasing the alkaline effect and neutralizes the effect of Sulphur.

Ship marine hold cleaning chemicals

ALKAATuff High Foam CLEANER most suitable for cargo hold and tank cleaning.

ALKAATuff High Foam CLEANER plays very important role during ship hold cleaning , Its high foam abilityincreasing ALKAATUFF cleaning power on the vertical surface, As liquid product can't sustain on the vertical surface while HIGH composite FOAM can sustain on the surface which is resulting from good cleaning effect. 
Extra foaming is major features which is differentiating ALKAATUFF high foam to general ALKAATUFF.

ALKAATuff High Foam CLEANER using procedure and cleaning method : 
1st Step Cleaning of extra and excess loose particle::: 
Before applying  ALKAATuff High Foam CLEANER on hold surface, Makes sure extra loose cargo particle should be removed manually or Air blown method. Then cleaning procedure can be followed either by high foam machine or Manual. 
2nd step is for Mixing and dilution of ALKAATuff High Foam CLEANER:::
If cleaning step is with HP machine ( High Pressure ), Then mix concentrated ALKAATUFF high foam with fresh water, it can be diluted 1 Ltrs ALKAATuff High Foam CLEANER CLEANER with 4 to 5 Ltrs Fresh water.  

If cleaning step followed by hand spray, Then apply ALKAATUFF high foam neat on the surface. Approx  1 ltr covers 10 to 12 square meter. 

3rd Step final procedure::: 

Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80 - 90 degree. Rinsing procedure can be repeated 1 to 3 times if required for Cargo Tank and Cargo Hold Cleaning.

ALKAATuff High Foam CLEANER supplier in Mumbai, Nhava Seva, Pirpav, Surat - Hazira, Kandla - Gandhidham, Sikka - Mundra, Manglore - Goa, Vizag - Visakhapatnam, Gangavaram, Kakinada, Chennai - Ennore, Kolkata, Haldia, Paradip, Buj buj,  Dubai - Sharjah, Fujairah Middle East

Shipping Tanker, Bulk Carrier cleaning agent, Hold Cleaning Agent. Heavy Duty Alkaline Cleaner with Extra Foaming Effect.
 

ALKAATuff High Foam CLEANER is absolutely free along with the purchase of slip barrier coat - Hold block ( Pre load ) materials. ALKAATUFF High foam Free 1000 Ltr with the purchase of 1000 ltrs Slip Barrier Coat Plus is available at Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf

 

Here the question that arises is why ALKAATuff High Foam CLEANER is so important during Ship Hold Cleaning?

 

ALKAATuff High Foam CLEANER is alkaline in nature which neutralizes the acidic residue created due to the presence of moisture and products like coal, sulphur, salt etc. And emulsification effect of ALKAATUFF makes alll oil stain water soluble.  It means ALKAATUFF High Foam CLEANER major role is to neutralize the acidic residue and emulsifying Oil residue. One more important feature of ALKAATUFF high foam results in the formation of dense foam with high-pressure machines, which can easily be applied even on vertical surfaces.

 

ALKAATuff High Foam CLEANER - Acts as an Acid Neutralizer - Useful for coal, Sulfur, Salt as its residue when in contact with water, is acidic in nature which directly damages the painted and metal surfaces.

 

ALKAATuff High Foam CLEANER - Acts as an Oil residue Emulsifier - Useful for removal of coal and oily residue.

 

ALKAATuff High Foam CLEANER - Results in Dense foam - Can be applied on the vertical surface for the long duration.

 

The largest supplier of ALKAATuff High Foam CLEANER in Asia ( India and Middle East). More details of ALKAATUFF High Foam CLEANER like MSDS and Using procedure of will be available through this link

ALKAATUFF high foam cleaner detergent for ship hold cleaning

FAQ: 
What is ALKAATUFF High Foam used for?
Cargo hold cleaner for coal and pet coke
Metal Clean Bright for Ship Hold rust cleaning?
ALKAATUFF is Free
Coal to Food Grain Cargo change cleaning tips
How to use Alkaline Extra Ship hold cleaning detergent?

NUBUCK CLEANER

Packing Size: 
0.00
Short Description: 
NUBUCK CLEANER

NUBUCK CLEANER manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of NUBUCK CLEANER at a competitive price from us. We have ready stock of NUBUCK CLEANER in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

  • 2221 reads

Fine Fabric Detergent

Packing Size: 
0.00
Short Description: 
Fine Fabric Detergent

Fine Fabric Detergent manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Fine Fabric Detergent at a competitive price from us. We have ready stock of Fine Fabric Detergent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

  • 3318 reads

Alkalinity Test Reagent TK - 8

Pl. refer this link for more details : www.rxmarine.com/Alkalinity-test-kit

Alias: 

P-Alkalinity indicator

Packing Size: 
50.00 slan
Short Description: 
TK 8 addition will turn sample colour to BLUISH-GREEN.

Alkalinity Test Reagent TK - 8 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Alkalinity Test Reagent TK - 8 at a competitive price from us. We have ready stock of Alkalinity Test Reagent TK - 8 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

stock-clearance.png