Search

Test Kit For Water-62

Bilge Coat RXSOL

Bilge Coat (Sulphur Acid Neutralizer)

RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution  for  the Bilge Line and well during the carry of cargo as like Sulphur. This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effective in use compare than other alkaline Materials.

Acts as Acid Neutralizer formed during sulphur voyages. 

Alias: 

RBM Bilge Coat 30 kg Pack

Application: 

Dose and Using Procedure

• Use a clean Drum or any plastic tank. Fill the water up to 190 Ltrs and add the RXSOL concentrated Bilge coat 2-4 Ltrs. Stirr well and now it is ready RXSOL BILGE COAT SOLUTION to use.

• Pour 15 to 20 litres of RXSOL BILGE COAT SOLUTION  directly into each hold sounding pipe from on deck.  Replenish each time after the bilge water is pumped out.

Packing Size: 
30.00 Kg.Liq
Using Procedure: 

General recommandation 1 Jug per hold, per week.

Note: 

Benifit :

>Bilge Protection against Acidic Water.
>Enviroment Friendly.
>Low quantity is sufficiant Due to High Concentration and easy ro transport.
>Can be Easly Use and make the solution by Ship Crew on board.
> Due to liquid easy to handle and safe compare than other solid alkaline materials.

Related Products: 
BARRIER HOLD COAT
Slip Barrier Coats HOLD BLOCK
HBI CARGO Hold Wash Concentrate RX 25 Ltrs
Hold Wash Concentrate RX
Diaphragm Pump
Shoulder Pesticide Pumps Sprayer
Plastic Hand Pumps
DEGREASER
TPOL 20 Ltr BUCKET
Hand Cleaner Paste, Waterless 1 Kg Pkg
Slip Barrier Coats HOLD BLOCK
Safety Accessories: 
Gloves Disposable
Goggle Chemical Protective
PVC Chemical Resistance Boot
Article News: 
Bilge Coat (Sulphuric Acid Neutralizer)
Alkaline high foam ship hold cleaning detergent supplier in India and Middle East
ALKAATUFF Heavyduty Alkaline ship hold cleaning detergent and chemicals
Short Description: 
RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur.This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effect

Acid Neutralizer is very effective product to neutralize acidic cargo residue. 

#BilgeCoat_PipavaGUJRAT
#BilgeCoatSupplier
#BilgeCoat_UAEoman
#Bilge_CoatMUSCAT
#BilgeCOAT_MumbaiKolkataVizagChennaiParadip

We are in Marine cleaning chemicals and keeping ready stock of Tank cleaning chemicals for tanker vessel and also ship hold cleaning chemicals for Dry Bulk Carriers available ready stock at all Indian and UAE - Middle East coastal. Please feel free to Contact us, we will answer 24 hours, 7 days a week.

Bilge Coat Acid neutrailzer supplier in Kandla - Deen Dayal UPadhya Port, Sikka, Mundra, Hazira, Mumbai, JNPT Nhava Seva, Goa, Manglore, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Sohar, Ghala, Ruwi, Barka, Muscat, Oman, Ruwi Barka, Sudan, Yemen, Mombasa

Which is the best ship hold marine cleaning chemicals?

No one can answer this question, As cleaning of ship Bulk carrier is fully depends up on there cargo nature. For example if vessel is carrying cement then Cement Cleaner will works as best ship hold cleaning chemicals similarly for lime cleaning, Lime remover is best while for general cleaning ALKAATUFF Ship Hold Cleaner, Aquabreak high foam.

Corrosive cargo like Sulfur, Salt extremely damaging ship hold metal surface as after getting moisture during transit such cargo releas acid which is highly coroding the metal surface and causing pit on surface. Wise man knows about such chemical reaction between metal and such cargo and before loading they are using polymer based thin layer, which is commonly called Slip PolyCoat - Hold Block.

RX MARINE INTERNATIONAL is one of largest cement cleaner, lime cleaner, ALKAATUFF Ship Hold Cleaner, Aquabreak, Slip PolyCoat and many other various type of marine chemicals in India and Middle East. And we are marine chemicals supplier in Mumbai - JNPT - Nhava Seva, Kandla - Deen Dayal Upadhyay, Mundra, Sikka, Navlakhi, Surat Hazira, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata - Haldia - Buz buj, Paradip, Manglore, Goa, Fujairah, Dubai, Abu Dhabi, Sharjah - UAE.

Email : mail@rxmarine.com

Acid Neutralizer

FAQ: 
Sulphur cargo handling tips
How Bilge Coat is useful for protection of Bilge Line and Well
  • 12398 reads

Passivity Test Kit for PASSIVATION

This kit verifies if the surface is passive and if it will resist oxidation as requested by steel specifications for AISI 300 and 400. It can also be used to quickly separate Series 400 from Carbon steel.

This test will give a red/pink result when in contact with Iron. The chemicals used in these tests are not hazardous. But the surface should be carefully rinsed after the test.

 

Application: 

Apply 1-2 drops of Reagent RXSOL TK-11 to the surface to be inspected and let it react for at least 1 minute. Absorb the drop with the filter paper (supplied) and add 1 drop of Reagent RXSOL TK-12.
The paper will remain white if the surface is passive or if the piece is Stainless steel 400 Series. If the paper changes colour to pink it means that the surface is not, more or less, passive.  The more pink, the less passive. An intense red colour means that the piece is Carbon steel

 

RXSOL TK-11 

RXSOL TK-12 

Packing Size: 
1.00 Box
Related Products: 
Ferroxyl Test Kit for free IRON passivation
Palladium Chloride Passivation Test Kit
Palladium Chloride Solution
Passivation Liquid RX
Passivation Method verson II
Safety Accessories: 
Hand Gloves Chemical resistance
Short Description: 
This test will give a red/pink result when in contact with Iron.

#PassivityTestKitPASSIVATION
#PassivationTestKit

Passivity Test Kit for PASSIVATION manufacturer and supplier in Chennai, Mumbai, Kandla Gandhidham Surat, Visakhapatnam, Kolkata, Haldia, Paradip Fujairah, Sharjah, Abudhabi, Ajman, Muscat Barka Oman

Arsenic test kit

Packing Size: 
1.00 Full SET
Short Description: 
Arsenic test kits can be used to test for arsenic in water samples and confirm the safety of drinking water supplies. Some kits are designed for field use and can provide rapid results
  • 103 reads

ALKALINE HD coal remover

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.

Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.

Alias: 

Rock Phospate Cleaner, PETCOKE looser, COAL REMOVER RX Hold 220 Ltr

Active Matter: 
54 - 63
Application: 

• Use cold - No Heating required.
• Easily dissolves deposits containing carbon , polymer resin etc.
• Economical to use.
• Scraping not required.
• Non- flammable.
• Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
• Cleans oil side of fuel heaters, oil coolers, etc.
• Can be used for cleaning of : -Fuel Oil Filters - Pistons - Piston rings - Valve cage

Packing Size: 
220.00 Kg.Liq
Using Procedure: 

Directions for Use and Dose Rates

Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.

Cleaning Procedure

Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8–10 square meters.

NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

Note:-
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
• Stubborn deposits should be scrubbed to assist the cleaning operation.

Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Note: 

COAL REMOVER manufacturer and supplier in India / Turkey / Middle East. We havs stock point in Mumbai, JNPT, Surat, Hazira, Mundra, Kandla, sikka, Goa, Manglore, Visakhapatnam, Kamraj Port, Ennore, Chennai, Kolkata, Buz Buz, Paradip, Fujairah, Istanbul, Dubai, Sharjah, Abu Dhabi, Gulf.

We are classified as COAL REMOVER exporter of RXSOL brand.

you may click below to get all location details :::

For Tamilnadu - http://ennoreindiachemicals.com/contact-us

For Andhra Pradesh - http://vizagchemical.com/contact-us

For East Coastal - http://eastindiachemicals.com/contact-us

For Gujrat Port - http://westindiachemical.com/contact-us

For Mumbai Port -  http://marinechemical.in/contact-us

For JNPT - GOA - Manglore port - http://rxchemicals.com/contact-us

For Middle East - Gulf - http://www.dubichem.com/contact

 

Related Products: 
ACQUATuff High Foam
Cement Remover RX Hold
Safety Accessories: 
COAL REMOVER RX Hold
Iron Ore Red Dust Cleaner
Article News: 
SHIP CARGO HOLD CLEANING DETERGENT supplier in India UAE Oman
Short Description: 
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

Ship Hold Coal cleaning chemicals typical video Link.  We are one of largest coal cleaning chemicals - detergent manufacturer and supplier in India and Middle East.

This product is most popular for Ship Hold cleaning detergent for coal cleaning. Shipchandler Shipping Agent can get good discounts directly from our factory by providing there registered accounts number. 

#CoaLremover_Mumbai
#CoaLremover_MundraKANDLA
#CoaLremover_Visakhaptnam
#CoaLremover_FujairahMuscat
#AlkalineCleaner
#ShipHoldCleaner_Alkaline

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 

 

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 

 

Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Coal Remover - Powerful ship hold cleaning detergent manufacturer and supplier in Navlakhi Port, Hazira, Sikka, Jamnagara, Kandla, Mumbai, Manglore, Goa, Chenna Ennore, Visakhapatnam Vizag Gangavaram, Kolkata Haldia, Paradip, Manglore, Fujairah, Abudhani, Ajman, Sharjah, Barka, Muscat Oman, Canada, Kenya Nairobi Mombasa

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 

 

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 

 

Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Ship Cargo Coal cleaning chemicals

FAQ: 
How Coal remover cleaning property can be enhanced
  • 1052 reads

Corrosion Inhibitor for Diesel Cooling Water Treat

Corrosion Inhibitor for Diesel Cooling Water Treatment - RXSOL CIDC is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid, also used as a corrosion inhibitor ( Protects all the metals including cast iron, mild steel, copper .)

Alias: 

E.W.T. Inhibitor 9-131c, Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC

Active Matter: 
45-50
Application: 

The stable oxide film that is formed by RXSOL CIDC prevents corrosion caused by the electrolytic action between dissimilar metals used in the system .RXSOL CIDC has been field tested and found to have no detrimental effects on non-metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL CIDC incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval.

Note: 

In cases where systems are contaminated with oil and/or scale, they should be cleaned before starting to apply RXSOL CIDC.There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL-20-2002-025 and descaling by using RXSOL 1008.

Related Products: 
ROCCOR NB RXSOL Colour Indicator
RXSOL 2000 Corrosion Inhibitor
Sodium Molybdate
Engine Guard NB Scale Inhibitor DEWT
Heavy Duty Cleaner
Short Description: 
Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib
Information: 

 Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC specialized product for Marine and shipping industrial use. Major supplier in all INDIAN and UAE Middle East coastal.  RXSOL CIDC Prolong the life of equipment by keeping scale and corrosion free.

RXSOL CIDC Water-soluble corrosion inhibitors FOR MTU engine.

Advatages : -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL CIDC is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product accidentally overdoses, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.

2. Improves generating cooling efficiency by maintaining a clean heat transfer

3. Corrosion protection by using a superior corrosion inhibitor.

4. Reduced maintenance and downtime

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Marine Diesel Engine specialized corrosion inhibitor.

NOTE : Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine, life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2-month interval.

Marine Chemicals

Boiler water treatment chemicals

Fuel oil treatment chemicals

Tank cleaning chemicals

Test kits and reagents

Cooling water treatment chemicals

Oil spill dispersant

Electric cleaning chemicals

Air cooler cleaning chemical

Antiscalants

Defoamers /Surfactants

Oxygen Scavengers

Custom Blending of Water Treatment Chemicals

Water Treatment Chemicals - Raw 

Coagulants

Flocculants

Disinfectants

Corrosion Inhibitors

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40% 

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC). 

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate. 

Boiler Water Treatment Chemicals

Precleaning & Passivation

Scale Inhibitors

Corrosion Inhibitors

pH Booster (Inorganics & Organics)

Descaling Chemicals (online / offline)

Sludge Conditioner

Condensate Treatment Chemicals

Amine Based treatment Scale Inhibitors

 

Corrosion Inhibitors

Biocides

Biodispersant

Dealkalisers

Descalants

Cooling Water Treatment Chemicals

Chiller Water

Treatment Chemicals

Pre cleaning Chemicals

Anticorrosion Treatment

Antimicrobial Treatment

STP Treatment Chemicals

Biocultures

Deodorants

Biomass Setting Agents

Disinfectants

Defoamers

Nutrients

Enzymes

ETP Treatment Chemicals

Coagulant

Flocculant

Decolorant

Dewatering Aids /

Filter Aids

Bioculture – Anaerobic & Aerobic

Deodorants

De-Emulsifiers

Polymers for Filter Press /

dewatering Evaporator Antiscalants

Water Treatment Chemicals

Biocides

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Dust control products

Membrane treatments

Metal passivators

Monitoring and control systems

Odor inhibitors

Oxygen scavengers

Scale inhibitors

Sludge dewatering polymers

MUNICIPAL water treatment chemicals

Coagulants/flocculants

Defoamers

Feed / make down equipment

Membrane treatments

Mixing equipment

Odor inhibitors

Scale inhibitors

Sludge dewatering polymers

MINING & MINERAL PROCESSING

Coagulants/flocculants

Dust control products

Filtration aids

Grinding aids

Monitoring and control systems

Non-sulfide flotation reagents

Rheology modifiers

Scale inhibitors

Specialty dewatering aids

Viscosity modifiers

CHEMICAL PROCESSING

Biocides

Cleaners

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Membrane treatments

Monitoring and control systems

Odor neutralizer

Oxygen scavengers

RO Membrane Treatment Chemicals

RO Pre -Treatment Chemicals

Membrane Antiscalants

Raw water RO (Food grade)

Effluent Recycle RO

Desalination Plants

Membrane Antioxidants

Membrane Cleaning Chemicals

Membrane Preservatives

Online / Offline Biocides

pH Boosters (Food Grade)

Taste Enhancers for RO Product water

Sanitizing Products for PSF, ACF Filter

Media and Pipelines.

Sugar Process Chemicals

Boiler Treatment Chemicals

Juice Clarification Aids

Syrup Clarification Aids

Mill Sanitation Chemicals

Viscosity Reducer

Anti Foamer / Defoamer

Evaporator Antiscalant & Descalants

Sugar Refining Compounds

Color Precipitants

Paper Process Treatment Chemicals

Anti Slimicides

Defoamers

Chemicals For Krofta Applications

Boil –out Chemicals

Vacuum Pump Antiscalant

ETP Chemicals

Water-soluble corrosion inhibitors FOR engine water treatment

  • 16548 reads

Copper Sulfate LR for passivation test

The copper sulfate test is used to detect the presence of metallic iron and iron oxide on the surface of materials.

Question - What solution strength is needed to copper sulfate solution can be used to determine if a metal is stainless steel or just steel ? 
Answer    - Copper sulfate (CuSO4*5H2O) + H2SO4 (anywhere from 1% to 50% is specified in various test methods).

Alias: 

Copper Sulfate Liquid

Application: 

How does copper sulfate test for passivation work?

ANSWER : Chromium and nickel will not be replaced with the Copper sulfate test solution (which also contains sulfuric acid), only the Fe or other less noble metals. If there is free iron on the surface it will be replaced by the copper, forming the distinctive copper color on the surface in this 6 minute test. Of course, this test should only be used on austenitic stainless steel. Some people use it on other grades, but you can get false failures.

 

 

Click here for PASSIVATING LIQUID technical information , to know Other testing methods for PASSIVATION , Passivation Method

Packing Size: 
1.00 Bottle
Using Procedure: 

Spray the surface with a solution of copper sulfate in water. If free iron is present, a copper film will form. In this test, the chemical reaction is:

 Fe + CuSO4 = FeSO4 + Cu
The copper film is immediately visible.
 

Copper sulphate test: a galvanic type test in which the more noble copper plays upon less noble iron particles but not on SS.  Patches of copper sulphate shows a poorly passivated surface. Passivated parts are immersed in a Copper Sulfate solution for five minutes, rinsed and visually examined. Any copper (pink) color indicates the presence of free iron and the test is considered unacceptable.

Ferroxyl test: causes coloured iron compounds to appear as specks.

Related Products: 
Nitric Acid 68%
RX JELLY Pickling Paste
Ferroxyl Test Kit for free IRON passivation
Passivation Liquid RX
Passivation Method verson II
PL-CON Tank cleaner
Short Description: 
Detect the presence of metallic iron and iron oxide. Chromium and nickel will not be replaced with the Copper sulfate test solution, forming the distinctive copper color on the surface in this 6 minute test.

Copper Sulfate LR for passivation test manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Copper Sulfate LR for passivation test at a competitive price from us. We have ready stock of Copper Sulfate LR for passivation test in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Laboratory Grade Copper Sulphate Liquid

  • 14302 reads

Conductivity Meter

Alias: 

TDS meter

Packing Size: 
1.00 Pieces
Short Description: 
TDS Meter with automatic Temperature Compensation

Conductivity Meter manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Conductivity Meter at a competitive price from us. We have ready stock of Conductivity Meter in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

TDS Meters

  • 6490 reads

Conductivity Standard 15 µS/cm

Packing Size: 
1.00 Bottle
Short Description: 
The 84 uS/cm conductivity solution allows calibration of instruments with a conductivity scale of up to 200 uS/cm for the measurement of pure or distilled water.
  • 25 reads

Concrete Pipeline Powder

RXSOL CPLP Concrete Pipeline Lubricant Powder is concrete delivery truck mortar releasing solution.

 

RXSOL CPLP Lubricant helps concrete transport company  to save time to release mortar from vechicle and also helps to keep vehicle  mortar deposition free.

Alias: 

Lubricant for Concrete Pipeline, RXSOL CPLP

Active Matter: 
98-99
Application: 

Concrete pump line inwall is smeared irregularly when pumping, influence result of use, causes pump line to stop up easily, does not reach the effect that mortar moistens pipe,  RXSOL CPLP Concrete Pipeline Lubricant Powder helps as a lubricant to release mortar freely.

Packing Size: 
200.00 Grams
Using Procedure: 

Take Full container / Pouch of RXSOL CPLP Concrete Pipeline Lubricant Powder   in 50 - 75 Ltr of water, Mix Properly to Get Homogenious Light viscous solution. Then use the RXSOL CPLP water mixed slurry solution in PUMP PIPELINE  prior to concreting. its aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Note: 

RXSOL CPLP Concrete Pipeline Lubricant Powder  enhance concrete flow without block in pipe line. Which is resultig not only TIME SAVER but also protect CIRCULATING SYSTEM and PIPE Line heavy maintenance free.

RXSOL CPLP Concrete Pipeline Lubricant Powder's aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Related Products: 
Cement Cleaner
Cement Remover Gel
CEMENT Additive for Strength
Safety Accessories: 
Super Plasticizer (Admixture)
Retarder Cement Admixture
Concrete Accelerator Fast Setting
Short Description: 
Concrete lubricant for application of used in pipeline of concrete pump

This lubricant profit that is used for pipeline of concrete pump is managed 50 meters, 

Concrete Pipeline Powder manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Concrete Pipeline Powder at a competitive price from us. We have ready stock of Concrete Pipeline Powder in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Lubricant for Concrete Pipeline

  • 810 reads
stock-clearance.png