RIGS Oil Field-34

Bilge Coat RXSOL

Bilge Coat (Sulphur Acid Neutralizer)

RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur. This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effective in use compare than other alkaline Materials.

Acts as Acid Neutralizer formed during sulphur voyages.

Alias:

RBM Bilge Coat 30 kg Pack

Application:

Dose and Using Procedure

• Use a clean Drum or any plastic tank. Fill the water up to 190 Ltrs and add the RXSOL concentrated Bilge coat 2-4 Ltrs. Stirr well and now it is ready RXSOL BILGE COAT SOLUTION to use.

• Pour 15 to 20 litres of RXSOL BILGE COAT SOLUTION directly into each hold sounding pipe from on deck. Replenish each time after the bilge water is pumped out.

Packing Size:

30.00 Kg.Liq

Using Procedure:

General recommandation 1 Jug per hold, per week.

Note:

Benifit :

>Bilge Protection against Acidic Water.
>Enviroment Friendly.
>Low quantity is sufficiant Due to High Concentration and easy ro transport.
>Can be Easly Use and make the solution by Ship Crew on board.
> Due to liquid easy to handle and safe compare than other solid alkaline materials.

Related Products:

BARRIER HOLD COAT

Slip Barrier Coats HOLD BLOCK

HBI CARGO Hold Wash Concentrate RX 25 Ltrs

Hold Wash Concentrate RX

Diaphragm Pump

Shoulder Pesticide Pumps Sprayer

Plastic Hand Pumps

DEGREASER

TPOL 20 Ltr BUCKET

Hand Cleaner Paste, Waterless 1 Kg Pkg

Slip Barrier Coats HOLD BLOCK

Safety Accessories:

Gloves Disposable

Goggle Chemical Protective

PVC Chemical Resistance Boot

Article News:

Bilge Coat (Sulphuric Acid Neutralizer)

Alkaline high foam ship hold cleaning detergent supplier in India and Middle East

ALKAATUFF Heavyduty Alkaline ship hold cleaning detergent and chemicals

Short Description:

RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur.This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effect

Acid Neutralizer is very effective product to neutralize acidic cargo residue.

#BilgeCoat_PipavaGUJRAT
#BilgeCoatSupplier
#BilgeCoat_UAEoman
#Bilge_CoatMUSCAT
#BilgeCOAT_MumbaiKolkataVizagChennaiParadip

We are in Marine cleaning chemicals and keeping ready stock of Tank cleaning chemicals for tanker vessel and also ship hold cleaning chemicals for Dry Bulk Carriers available ready stock at all Indian and UAE - Middle East coastal. Please feel free to Contact us, we will answer 24 hours, 7 days a week.

Bilge Coat Acid neutrailzer supplier in Kandla - Deen Dayal UPadhya Port, Sikka, Mundra, Hazira, Mumbai, JNPT Nhava Seva, Goa, Manglore, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Sohar, Ghala, Ruwi, Barka, Muscat, Oman, Ruwi Barka, Sudan, Yemen, Mombasa

Which is the best ship hold marine cleaning chemicals?

No one can answer this question, As cleaning of ship Bulk carrier is fully depends up on there cargo nature. For example if vessel is carrying cement then Cement Cleaner will works as best ship hold cleaning chemicals similarly for lime cleaning, Lime remover is best while for general cleaning ALKAATUFF Ship Hold Cleaner, Aquabreak high foam.

Corrosive cargo like Sulfur, Salt extremely damaging ship hold metal surface as after getting moisture during transit such cargo releas acid which is highly coroding the metal surface and causing pit on surface. Wise man knows about such chemical reaction between metal and such cargo and before loading they are using polymer based thin layer, which is commonly called Slip PolyCoat - Hold Block.

RX MARINE INTERNATIONAL is one of largest cement cleaner, lime cleaner, ALKAATUFF Ship Hold Cleaner, Aquabreak, Slip PolyCoat and many other various type of marine chemicals in India and Middle East. And we are marine chemicals supplier in Mumbai - JNPT - Nhava Seva, Kandla - Deen Dayal Upadhyay, Mundra, Sikka, Navlakhi, Surat Hazira, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata - Haldia - Buz buj, Paradip, Manglore, Goa, Fujairah, Dubai, Abu Dhabi, Sharjah - UAE.

Email : mail@rxmarine.com

Acid Neutralizer

FAQ:

Sulphur cargo handling tips

How Bilge Coat is useful for protection of Bilge Line and Well

12390 reads

PHPA Polymer Liquid

PARTIALLY HYDROLYSED POLYACRYLAMIDE (PHPA) manufactured by RXSOL manufacturing Plant in Mumbai, RXSOL PHPA is high molecular weight polymers one of the most Popular Drilling Polymers in the Oilfield Industry. Polymerised product of 2-Acrylamido 2-methylpropanesulfonic acid which is high molecular weight polymers (greater than two million) are desired.

Alias:

EM35, PHPA LIQUID, GLO DRILPOL 9000, POLYPLUS,EZ MUD, NEW DRILL HP, HYDRO CAP L, HYDRO CAP RD, Poly PLUS, Liqui Pol

Application:

PHPA is a co-polymer of anionic character and high molecular weight. very strong ionic group and ionizes completely in aqueous solutions. In applications where the precipitation of mineral salts is undesirable, the incorporation of a polymer containing even a small quantity of AMPS can significantly inhibit the precipitation of divalent cations. It is a water-soluble polymer, which is primarily used as a highly efficient fluid loss reducer, Viscosifier and protective colloid for shale’s and cutting in fresh water, calcium, sodium brines and KCL mud systems. It is compatible with most of the drilling fluid products, biopolymers, PAC, CMC. It maintains borehole stability by preventing shale swelling and erosion.

Packing Size:

25.00 Kg

Using Procedure:

RXSOL PHPA LIQUID is easy to mix and yields rapidly. PHPA active concentration of the active system should be maintained in the range of 0.5 - 1.5 lb/bbl by constant additions.

The normal application is 1.75 to 3.5 lb/bbl used in combination with KCl Potassium Chloride at 3 - 8% provides effective inhibition.

Note:

PHPA LIQUID provides provides excellent cuttings encapsulation and improved wellbore stability. PHPA LIQUID is PHPA Polymer, a high-molecular-weight synthetic polymer designed as a shale inhibitor in water-based mud. PHPA LIQUID is not susceptible to bacterial attack. PHPA maintains viscosity in solid free drilling fluid. As a Bentonite extender in low solids non-dispersed mud, it can be used along with small addition of Bentonite to suspend weight material.

Related Products:

2-Acrylamido 2-methylpropanesulfonic Acid ATBS

Drilling Polymer

Drilling Liquid Synergistic Polymer

Calcium Chloride

Safety Accessories:

Anionic Polymer RXFLOC 124

Cationic Polymer Liquid

Biopolymer RXPT

Potassium Chloride

Short Description:

RXSOL PHPA is high molecular weight polymers one of the most Popular Drilling Polymers in the Oilfield Industry.

PHPA Emulsion is manufactured at our Mumbai plant in India. We are one of the leading manufacturers and suppliers to Oil Field , Mineral Exploration , HDD , Water Well Drilling etc. We are supplying to all major drilling companies in India and abroad.

Our other valuable products- PHPA Emulsion, PHPA Powder and Drilling Viscosifiers, Drilling Fluid Additive for Bentonite, Drilling Waste Water Treatment Chemicals, Shale Inhibitor & Clay Stabilizers, Extreme Pressure Lubricants, Coagulants, Flocculants, De Oiler, Decolorizing Polymers and Mineral Processing & Slime Treatment Polymers.

2-Acrylamido 2-methylpropanesulfonic acid USES and Application :::

Water Treatment Chemicals

a) Dispersants (Low molecular Weight): Co-Polymer and terpolymers of 2-Arcylamido 2-methylpropanesulfonic Acid are used in Cooling Tower and Boilers to inhibit Calcium, Magnesium and Silica scale.

b) Flocculants (High Molecular Weight): High Molecular Weight Co-polymer of 2-Arcylamido 2-methylpropanesulfonic Acid is used to percipitate solids in industrial and mining effluents.

Emulsions For Paints and Paper Coatings

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve scrub resistance, dispersant performance and reduce grit formation.

Adhesives

a) Pressure Sensitive Adhesives : Ploymers containing 2-Arcylamido 2-methylpropanesulfonic Acid are used to improve tack and peel strength in Pressure Sensitive Adhesive fromulations.

b) Wood Glue : ploymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve adhesive strength, thermal and mechanical properties with superior rheology.

Hydrogels and Super absorbants

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid are used in diapers, lotions and other personal care products, due to high water absorbing capacity, electrical conductivity, slipperiness and lubricity. Being super absorbants, ploymers also finds applications in the agriculture sector as water retention agents.

Textiler Auxillaries

Ploymers containing 2-Arcylamido 2-methylpropanesulfonic Acid are widely used as Textile Sizing Agents, Thickeners, Dispersants and Non-Woven Emulsion Binders.

Detergents and Cleaners

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve charachteristic of hydrophilicity, dispersibility, and lubricity and also enhance the cleaning efficiency of Detergents and Cleaners

Oilfield and Mining Chemicals

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid provide excellent high temperature stability, lubricity and friction reduction in drilling and cementing fluids.

Construction Chemicals / Super Plasticizers

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve dispersability, lubricity and can be used as excellent flow control auxillaries for building materials.

Acrylic Fibre

Used as co-monomer in acrylic fiber industry to enhance dye receptibility.

2-Acrylamido 2-methylpropanesulfonic Acid ATBS manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of 2-Acrylamido 2-methylpropanesulfonic Acid ATBS at a competitive price from us. We have ready stock of 2-Acrylamido 2-methylpropanesulfonic Acid ATBS in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

PHPA CO-Polymer

RIGS Oil Field-34

Read more
24 reads

ALKALINE HD coal remover

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.

Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.

Alias:

Rock Phospate Cleaner, PETCOKE looser, COAL REMOVER RX Hold 220 Ltr

Active Matter:

54 - 63

Application:

• Use cold - No Heating required.
• Easily dissolves deposits containing carbon , polymer resin etc.
• Economical to use.
• Scraping not required.
• Non- flammable.
• Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
• Cleans oil side of fuel heaters, oil coolers, etc.
• Can be used for cleaning of : -Fuel Oil Filters - Pistons - Piston rings - Valve cage

Packing Size:

220.00 Kg.Liq

Using Procedure:

Directions for Use and Dose Rates

Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.

Cleaning Procedure

Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8–10 square meters.

NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

Note:-
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
• Stubborn deposits should be scrubbed to assist the cleaning operation.

Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Note:

COAL REMOVER manufacturer and supplier in India / Turkey / Middle East. We havs stock point in Mumbai, JNPT, Surat, Hazira, Mundra, Kandla, sikka, Goa, Manglore, Visakhapatnam, Kamraj Port, Ennore, Chennai, Kolkata, Buz Buz, Paradip, Fujairah, Istanbul, Dubai, Sharjah, Abu Dhabi, Gulf.

We are classified as COAL REMOVER exporter of RXSOL brand.

you may click below to get all location details :::

For Tamilnadu - http://ennoreindiachemicals.com/contact-us

For Andhra Pradesh - http://vizagchemical.com/contact-us

For East Coastal - http://eastindiachemicals.com/contact-us

For Gujrat Port - http://westindiachemical.com/contact-us

For Mumbai Port - http://marinechemical.in/contact-us

For JNPT - GOA - Manglore port - http://rxchemicals.com/contact-us

For Middle East - Gulf - http://www.dubichem.com/contact

Related Products:

ACQUATuff High Foam

Cement Remover RX Hold

Safety Accessories:

COAL REMOVER RX Hold

Iron Ore Red Dust Cleaner

Article News:

SHIP CARGO HOLD CLEANING DETERGENT supplier in India UAE Oman

Short Description:

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

Ship Hold Coal cleaning chemicals typical video Link. We are one of largest coal cleaning chemicals - detergent manufacturer and supplier in India and Middle East.

This product is most popular for Ship Hold cleaning detergent for coal cleaning. Shipchandler Shipping Agent can get good discounts directly from our factory by providing there registered accounts number.

#CoaLremover_Mumbai
#CoaLremover_MundraKANDLA
#CoaLremover_Visakhaptnam
#CoaLremover_FujairahMuscat
#AlkalineCleaner
#ShipHoldCleaner_Alkaline

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit. Also help to remove stains and discolouring after discharge of coal cargoes.

Cost effective SOLUTION for cleaning aſter coal residues, specific ore residues.

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER.

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent / holdbrite with 5 ltr water. Then Mix (A) and (B) to spray on coal deposited and stain area.

Other valuable product -
For RUST REMOVING use RXSOL-16-1088-025 And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Coal Remover - Powerful ship hold cleaning detergent manufacturer and supplier in Navlakhi Port, Hazira, Sikka, Jamnagara, Kandla, Mumbai, Manglore, Goa, Chenna Ennore, Visakhapatnam Vizag Gangavaram, Kolkata Haldia, Paradip, Manglore, Fujairah, Abudhani, Ajman, Sharjah, Barka, Muscat Oman, Canada, Kenya Nairobi Mombasa

Cost effective SOLUTION for cleaning aſter coal residues, specific ore residues.

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER.

Other valuable product -
For RUST REMOVING use RXSOL-16-1088-025 And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Ship Cargo Coal cleaning chemicals

FAQ:

How Coal remover cleaning property can be enhanced

1050 reads

RIGS Oil Field-34

7 reads

Corrosion Inhibitor for Diesel Cooling Water Treat

Corrosion Inhibitor for Diesel Cooling Water Treatment - RXSOL CIDC is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid, also used as a corrosion inhibitor ( Protects all the metals including cast iron, mild steel, copper .)

Alias:

E.W.T. Inhibitor 9-131c, Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC

Active Matter:

45-50

Application:

The stable oxide film that is formed by RXSOL CIDC prevents corrosion caused by the electrolytic action between dissimilar metals used in the system .RXSOL CIDC has been field tested and found to have no detrimental effects on non-metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL CIDC incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Packing Size:

25.00 Ltr.

Using Procedure:

Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval.

Note:

In cases where systems are contaminated with oil and/or scale, they should be cleaned before starting to apply RXSOL CIDC.There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL-20-2002-025 and descaling by using RXSOL 1008.

Related Products:

ROCCOR NB RXSOL Colour Indicator

RXSOL 2000 Corrosion Inhibitor

Sodium Molybdate

Engine Guard NB Scale Inhibitor DEWT

Heavy Duty Cleaner

Short Description:

Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib

Information:

Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC specialized product for Marine and shipping industrial use. Major supplier in all INDIAN and UAE Middle East coastal. RXSOL CIDC Prolong the life of equipment by keeping scale and corrosion free.

RXSOL CIDC Water-soluble corrosion inhibitors FOR MTU engine.

Advatages : -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL CIDC is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product accidentally overdoses, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.

2. Improves generating cooling efficiency by maintaining a clean heat transfer

3. Corrosion protection by using a superior corrosion inhibitor.

4. Reduced maintenance and downtime

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Marine Diesel Engine specialized corrosion inhibitor.

NOTE : Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine, life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2-month interval.

Marine Chemicals

Boiler water treatment chemicals

Fuel oil treatment chemicals

Tank cleaning chemicals

Test kits and reagents

Cooling water treatment chemicals

Oil spill dispersant

Electric cleaning chemicals

Air cooler cleaning chemical

Antiscalants

Defoamers /Surfactants

Oxygen Scavengers

Custom Blending of Water Treatment Chemicals

Water Treatment Chemicals - Raw

Coagulants

Flocculants

Disinfectants

Corrosion Inhibitors

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40%

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC).

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate.

Boiler Water Treatment Chemicals

Precleaning & Passivation

Scale Inhibitors

Corrosion Inhibitors

pH Booster (Inorganics & Organics)

Descaling Chemicals (online / offline)

Sludge Conditioner

Condensate Treatment Chemicals

Amine Based treatment Scale Inhibitors

Corrosion Inhibitors

Biocides

Biodispersant

Dealkalisers

Descalants

Cooling Water Treatment Chemicals

Chiller Water

Treatment Chemicals

Pre cleaning Chemicals

Anticorrosion Treatment

Antimicrobial Treatment

STP Treatment Chemicals

Biocultures

Deodorants

Biomass Setting Agents

Disinfectants

Defoamers

Nutrients

Enzymes

ETP Treatment Chemicals

Coagulant

Flocculant

Decolorant

Dewatering Aids /

Filter Aids

Bioculture – Anaerobic & Aerobic

Deodorants

De-Emulsifiers

Polymers for Filter Press /

dewatering Evaporator Antiscalants

Water Treatment Chemicals

Biocides

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Dust control products

Membrane treatments

Metal passivators

Monitoring and control systems

Odor inhibitors

Oxygen scavengers

Scale inhibitors

Sludge dewatering polymers

MUNICIPAL water treatment chemicals

Coagulants/flocculants

Defoamers

Feed / make down equipment

Membrane treatments

Mixing equipment

Odor inhibitors

Scale inhibitors

Sludge dewatering polymers

MINING & MINERAL PROCESSING

Coagulants/flocculants

Dust control products

Filtration aids

Grinding aids

Monitoring and control systems

Non-sulfide flotation reagents

Rheology modifiers

Scale inhibitors

Specialty dewatering aids

Viscosity modifiers

CHEMICAL PROCESSING

Biocides

Cleaners

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Membrane treatments

Monitoring and control systems

Odor neutralizer

Oxygen scavengers

RO Membrane Treatment Chemicals

RO Pre -Treatment Chemicals

Membrane Antiscalants

Raw water RO (Food grade)

Effluent Recycle RO

Desalination Plants

Membrane Antioxidants

Membrane Cleaning Chemicals

Membrane Preservatives

Online / Offline Biocides

pH Boosters (Food Grade)

Taste Enhancers for RO Product water

Sanitizing Products for PSF, ACF Filter

Media and Pipelines.

Sugar Process Chemicals

Boiler Treatment Chemicals

Juice Clarification Aids

Syrup Clarification Aids

Mill Sanitation Chemicals

Viscosity Reducer

Anti Foamer / Defoamer

Evaporator Antiscalant & Descalants

Sugar Refining Compounds

Color Precipitants

Paper Process Treatment Chemicals

Anti Slimicides

Defoamers

Chemicals For Krofta Applications

Boil –out Chemicals

Vacuum Pump Antiscalant

ETP Chemicals

Water-soluble corrosion inhibitors FOR engine water treatment

16541 reads

Detergent Heavy Duty Alkaline Cleaner

Alias:

Professional Heavy Duty Alkaline Cleaner, Boiling Out Chemicals, SERFOLIN SP-167, UNIKLEEN 11, AQUALAR WATER BASED CONCENTRATE, NORCHEM AS 666, Blue Ocean Wash WaterBased Alkaline Degreaser, SODAKLENZ SUPER CONCENTRATED, AlkalineDegreasing 210 Ltr

Active Matter:

63-72

Application:

This product is recommended as a wall and floor cleaner in industrial facilities. May be used in pressure washer applications or hand steaming. Powerful cleaner/degreaser with controlled foam. Variable dilutions for the wide variety of applications. Economical choice. Effective cleaner.

This is an aqueous surfactant solution, alkaline base, food-grade phosphate product. Effective for degreasing and removal of oil residue, animal fat and vegetable bases on different surfaces: industrial equipment, including food, assemblies, transport, tanks, walls, floors and other surfaces, manual and machine washing of textiles and clothing. It has an average foaming capability when applied by hand or with the help of floor cleaning machines, pressure washers, equipment for foam cleaning.

Food service establishments
Hotels and motels
Educational facilities
Any general cleaning task
Heavy Industries and in PLANT area

This product is recommended as a wall and floor cleaner in industrial facilities, food service establishments hotels and motels educational facilities any general cleaning task.

It is also used in mechanical engineering, petroleum, and food industries, railway transport, office and warehousing, utilities and other industries.

Packing Size:

210.00 Ltr.

Using Procedure:

Dilute concentrated cleaner with warm water using 1 part Heavy Duty Alkaline Cleaner and 1 part water.

Apply mixed solution with a mop, sponge or sprayer. Avoid applying cleaner on unintended surfaces.

Lightly rub with a scrub brush or floor machine as needed. Allow cleaner for emulsification 1 to15 minutes for best results— do not allow to dry on the surface.

Remove solution using a sponge, wet/dry vacuum or damp mop.

Rinse the area well with clean water.

TYPICAL METHOD::: Dilute to proper ratio for the desired task, apply to surface and allow adequate contact time, wipe or rinse away.
Can be Use dilution of 1:100: 11.0 - 11.5 (1:100).

GENERALLY ::: In an aqueous solution, at a concentration from 10 ml to 200 ml per liter of water, depending on the degree of contamination.

For Boiler Cleaning :::

5 Ltr is sufficient for 1000 LTRS OF WATER.

The boiler should be warmed through by a slow fire, keeping the manhole closed, immediately after adding the chemical and pressure allowed to rise slowly. It should be raised sufficiently to
give a strong blow of steam at the air cocks. It should be allowed to cool and later blown down for about 15 seconds on each blow-down valve and refilled to about 5 cm level in the gauge glass. On the following day, carry out the same process except that the pressure is raised to approx 25 percent of the normal working pressure. On the third day, carry out the same process and then drain the boiler as detailed below –
When the pressure falls to 0.04 MN/m2 (0.4 kgf/cm2), the unit is blown down completely until it is empty, refilled to flood the drum and superheater and blown down again. It should then be carefully inspected. If any trace of oil or grease is observed, the process of boiling-out should be repeated. If the boiler is found free from grease or oil or sediment, it should be closed and filled with feed water as specified by the manufacturer.

Note:

Powerful cleaner its uses is Versatile and economical and It softens hard water Without odor and noxious fumes Easy to wash off Biodegradable, non-toxic, contains no VOCs base modifications, (minor modifications of content in Unikleen HD) does not contain ammonia or acid and not corrosive to metal, non-irritating to the skin and the respiratory tract. Passivating to metal surfaces Operates at low (from 30°C or 86 °F ) temperatures of the working solution It does not create a stable emulsion with washed out contaminants It has a long service life in the working solution.

Safety: Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash contaminated clothing before reusing. Wash thoroughly after handling.

Related Products:

Rig Wash Citrus Formula 25 Ltr

Rig Wash Green 1000 LTRS

SEA OIL CLEANER

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Short Description:

For removal of tough soils and its wide range of dilutions accommodate most any cleaning application. It can even be used in pressure washer applications or hand steaming. Heavy duty alkaline cleaner can be use as All-purpose cleaner and degreaser

Degreaser Heavy Duty Alkaline Cleaner manufacturer, Supplier and exporter.

Degreaser Heavy Duty Alkaline Cleaner manufacturer, supplier and exporter in India, Oman, UAE. We are keeping ready stock of Degreaser Heavy Duty Alkaline Cleaner at Mumbai, Visakhapatnam, Chennai, Kolkata, Gandihdham, Sharjah Dubai Abudhabi, Muscat Sohar Oman

Alkaline Soil Oil Grease Remover

FAQ:

Why LAC Liquid Alkaline Cleaner?

Read more
3273 reads

Demulsifier Premium

Oilfield Chemicals Demulsifiers - Demulsifier to successfully separate oil from water. Also suitable for lightest sweet crudes to the heaviest sour crudes.

Alias:

Pasetreat 6410, Clarient P 6752, DEMTROL, Separate water in Oil Emusion, Dissolvant Clariant

Active Matter:

90-93

Application:

RXSOL DEMULSIFIER is Water-In-Oil Demulsifiers, which can be used as stand-alone Demulsifiers to separate Formation Water from Crude Oil Emulsion. There are vast differences and Characteristics of Crude Oils produced in various Fields. Use and application Oil Soluble Demulsifier Testing & Selection is accomplished by standard Bottle Tests in Lab followed by Field Trial Tests. They are commonly used in the processing of crude oil for effectively separating formation water from emulsions in crude oil.

Demulsifier to successfully separate oil from water. Also suitable for lightest sweet crudes to the heaviest sour crudes.

Packing Size:

210.00 Ltr.

Using Procedure:

Dose recommendations have to be made on a case-by-case basis. The dosage of RXSOL DEMULSIFIER prescribed to break a particular emulsion varies from as little as 1 ltr per 20,000 Ltrs (50 ppm) of oil to as much as 1 Ltr per 10,000 ltrs (100 ppm) of oil. A few companies have even found that 20 ppm was more effective than the higher dosages, so we suggest adding the lower levels to your laboratory bench tests to verify the correct dosage for the specific application. Finding the most cost-effective dosage, as well as determining the best conditions of temperature, slow mixing, settling time, etc., is best done in the laboratory, using a sample of the actual oil or waste and a sample of Demulsifier.

Note:

Futrue and Benefit :

Contains surface-active materials
Separates water from oil
Free from defilements
Excellent stability
Precise chemical composition
Easy to Handle.

Storage and Handling :

RXSOL DEMULSIFIER shall be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be handled with dry absorbent like sand, sawdust, etc. On ingestion / eye contact with the product, medical attention should be sought immediately.

Related Products:

Demulsifier Emulsion Breaker

Demulsifier ORG

Reverse Demulsifier

Oil Spill Dispersant Type-I

Sediment Mud Silt Remover

Condensor Dispersant Scale Fouling Controller

Pour Point Dispersant Polymethacrylate Base

Hand Cleaner Paste, Waterless 1 Kg Pkg

TPOL 20 Ltr BUCKET

Safety Accessories:

Hand Gloves Chemical resistance

PVC Chemical Resistance Boot

Article News:

RX Marine Contact Details

Short Description:

Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water.

Marine and Oil Field chemicals manufacturer and supplier. Demulsifer direcly indicates emulsion breaker into oil and water phase. This product is most commonly used in Oil field demulsification process.

Demulsifier most commonly known as oil water separator in Oil field industries.

Demulsifier best discounted price directly from manufacturer are available through email. As we have reagular supply of Demulsifier in Oil filed industries, so we are keeping ready stock of demulsifier at our all phyisical location of India and UAE. Click here to get our physical loaction and franchise details http://rxmarine.com/where-to-buy

DEMULSIFIER CHEMICALS FOR WET CRUDE TREATMENT OF THE FOLLOWING TYPES :

Material to be used in (LUHAIS, BIN-OMAR and ARTAWI) field.
Material should effective and workable for a period of (2 years) from the date of delivery.
Manufacturers to state and guarantee that the specification should be unchanged and must be developed to give good results and to fill full the requirements of (SOC)
In case of any deviation in (Winter or Summer seasons) manufacturers must compensate the balancing quantities.
Manufacturers should send their representatives to follow the activity of materials during the period of contract.
Specifications of out let oil must not exceed:50 ppm salt 0.2% water content
Crude Oil Specification as follow:

Item	Option	Percent
1	API	32.4°
2	S.G	0.8633
3	Inlet Salt	45,000-60,000 ppm
4	W.C	7-12%
5	TDS WASH WATER	3000 ppm
6	TDS formation water	250,000 ppm
7	Oil Temp. Winter	(20-30) C°
8	Oil Temp. Summer	(50-60) C°
9	Viscosity in 21.1 C°	16.64 cSt
10	Viscosity in 37.8 C°	10.30 cSt
11	Viscosity in 50 C°	8.022 cSt
12	Viscosity in 60 C°	6.251 cSt
13	Sulfur Content wt%	1.7
14	H2S Dissolvedin crude oil ppm	Nil
15	Wax content wt%	7.9
16	Carbon residue wt%	1.9
17	Pour Point C°	C° -26

8. dose of competition should be (25-50) ppm
9. Added Material has no any side effects on the pipe line and exported oil and all other equipment.
10. The bidding should be included supplying (20 drums) of the material to be tested in LUHAIS field and assessment (without depending any previous test) (without any cost), otherwise technical and commercial offers will be neglected.
11. The test of samples make by field and finger print
12.The origin of manufacturer flow improver material (America)
13. Provide with bidding names of companies using the flow improver material and location.
14. The material should be environment friendly type and clearly state the type of process and clarify the best method how to deal with it.
15. The bidding should specify clearly the material life time in the (normal and up - normal ) working condition and the replacement or regeneration recommendation )
16. Delivery period to be (30) days, CIP Basra (S.O.C warehouse). SUPPLYING OF THE QUANTITIES ACCORDING TO (SOC)
REQUIREMENTS AND THE SCHEDULE OF DELIVERY TO BE AS FOLOWS:
1500 Drums during 3 months
1500 Drums during next 3 months
1500 Drums during last 3 months
17. Penalty Rate 20%.

Demulsifier bases can be used to treat light, medium and heavy crudes manufacturer, Exporter and supplier in India - Middle East, Oman, Canada. Popular Demulsifier supplier in Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Muscat Sohar Barka Oman, Canada, Kenya, Africa, Uganda, Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai Ennore, Kolkata Haldia Paradip

Question : What is Difference Between Demulsifier and Reverse Demulsifier?
Answer :
Reverse Demulsifiers—-Break oil-in-water emulsions

Demulsifiers—-Break water-in-oil emulsions

Email us to get MSDS, Technical Bulletine of Demulsifier. Also feel free to mail us to get customized and private labeling option of Demulsifier.

Pioneer in specialty oilfield production chemicals to treat a wide variety of oil and gas production problems faced by Oil Field Industries customers.

Methodology for Evalution of Demulsifier :

Step 1 :Treat 100ml of the emulsion with 40 mg/litre of Demulsifer, (using 1% w/v solution in xylene in 100 ml graduatd conical tube) and give 100 shakes of approximately 12 in stroke

Step 2 : Place treated emulsion in water bath maintained at 70 +1oC for a period of 15 minutes and allow it to settle for 5 minutes at 30+2oC. measure the quantity of clear water settled

Step 3 : Conduct a blank test with untrented emulsion under condition similar to treated emulsion

Step 4 : Substract the water seprator if any in blank test from treated sample and denote it as V. Similarly subtract the water separated from blank from total water present in emulsion and denote it Vo.

Report Efficiency Percentage as Follow : % Effiency =(V/ Vo) x 100

Demulsifiers	Offspec Crude from Emulsion in Oil
Water Clarifiers	Off Spec Re-Injection or Disposal Water
H2S Scavengers	High H2S and Mercaptans
Corrosion Inhibitors	High Internal Corrosion Rates
Scale Inhibitors	Scale Deposition Downhole or in Process
Biocides	Bacteria Fouling or Associated Corrosion
Oxygen Scavengers	High Oxygen Content in Water
Wax Inhibitors	Wax Formation Downhole or in Process
Asphaltene Inhibitors	Asphaltene Formation Downhole or in Process
Pour Point Depressants	High Pour Point Crude in Winter Conditions
Drag Reducers	Pipeline Throughput Limitations
Defoamers	Foaming in Process Separators

Emulsion Breaker to treat light, medium and heavy crude

FAQ:

How does RXSOL Demulsifier help in quick cleaning?

What are the advantages of using RXSOL Demulsifier?

Read more
14970 reads

Concrete Pipeline Powder

RXSOL CPLP Concrete Pipeline Lubricant Powder is concrete delivery truck mortar releasing solution.

RXSOL CPLP Lubricant helps concrete transport company to save time to release mortar from vechicle and also helps to keep vehicle mortar deposition free.

Alias:

Lubricant for Concrete Pipeline, RXSOL CPLP

Active Matter:

98-99

Application:

Concrete pump line inwall is smeared irregularly when pumping, influence result of use, causes pump line to stop up easily, does not reach the effect that mortar moistens pipe, RXSOL CPLP Concrete Pipeline Lubricant Powder helps as a lubricant to release mortar freely.

Packing Size:

200.00 Grams

Using Procedure:

Take Full container / Pouch of RXSOL CPLP Concrete Pipeline Lubricant Powder in 50 - 75 Ltr of water, Mix Properly to Get Homogenious Light viscous solution. Then use the RXSOL CPLP water mixed slurry solution in PUMP PIPELINE prior to concreting. its aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Note:

RXSOL CPLP Concrete Pipeline Lubricant Powder enhance concrete flow without block in pipe line. Which is resultig not only TIME SAVER but also protect CIRCULATING SYSTEM and PIPE Line heavy maintenance free.

RXSOL CPLP Concrete Pipeline Lubricant Powder's aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Related Products:

Cement Cleaner

Cement Remover Gel

CEMENT Additive for Strength

Safety Accessories:

Super Plasticizer (Admixture)

Retarder Cement Admixture

Concrete Accelerator Fast Setting

Short Description:

Concrete lubricant for application of used in pipeline of concrete pump

This lubricant profit that is used for pipeline of concrete pump is managed 50 meters,

Concrete Pipeline Powder manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Concrete Pipeline Powder at a competitive price from us. We have ready stock of Concrete Pipeline Powder in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Lubricant for Concrete Pipeline

807 reads

Activated Alumina Ball 5 to 8

Activated alumina 2 - 5 mm is highly porous material; this material can have a surface area significantly over 200 square metres/g. Very suitable for use as a filter of fluoride, arsenic and selenium in drinking water.

Alias:

5 - 8 mm Alumina Ball

Application:

Activated Alumina Desiccants:

Activated Alumina Desiccants is a porous form of aluminum oxide. It has a high surface area which adsorbs vapors without any change in form. Activated Alumina Desiccants will not soften or disintegrate easily when immersed in water.

Dew points to -40°F and lower may be achieved with Activated Alumina Desiccants depending on dryer design and operating conditions.

The 1/8” (2-5mm) bead is the size most frequently used in regenerative dryers.

If size is not known or specified, the 1/8” (2-5mm) size is usually satisfactory. However, if Activated Alumina Desiccants is used in a regenerative dryer and the desiccant retaining screens cannot be measured, the 1/4” (5-10mm) size should be used as a bed support (6” layer). If at all possible, obtain a sample and measure it before ordering.

Product Benefits:

High adsorption capacity. With high surface area and excellent pore distribution, Activated Alumina Desiccants has a high water adsorption capacity. This reduces initial cost, energy consumption and operating costs through smaller bed sizes and/or longer operating cycles.
Low abrasion. Insures less dusting during tower depressurization or loading. Low abrasion means low pressure drop and a reduced chance of plugging the afterfilter.
Resists liquid water. Water slugging due to upstream failure of aftercooler, separators or drain traps will not fracture the alumina beads. The adsorption capacity of the desiccant can be restored after complete regeneration.
High crush strength. High crush strength, which limits dusting, is important during loading of desiccant towers. High crush strength makes alumina effective as a prebed material when used with other types of desiccants.
Uniform bead sizes. Activated Alumina Desiccants is a uniformly sized bead. It provides low pressure drop to minimize channeling and ensures utilization of the full bed column section.

Packing Size:

25.00 Kg Granules

Using Procedure:

Drier Chemicals manufacturer, importer and exporter of industrial chemicals and desiccants such as silica gel, activated alumina, activated carbon and carbon molecular sieves etc. Click on this link to get Most powerful GAS absorber.

Note:

Also refer more details of Impregnated Activated Alumina with potassium permagnate KMNO4.

Potassium Permanganate Impregnated Alumina has strong oxidizing property with Potassium Permanganate (KMnO4), it has good efficienty in removing Hydrogen Sulfide(H2S) , Chlorine(Cl2), Formaldehyde(HCHO), Nitric Oxide (NO) & Sulfur Dioxide(SO2) from air.

Related Products:

Activated Alumina Desiccants

Potassium Permanganate Crystals

Soda Lime with Indicator

Silica Gel White 1 Kg Bag

Activated Carbon Pellet

Activated Carbon COCO

Aluminium Hydroxide ATH

Silica Gel Breather Blue

MANGANESE DIOXIDE TECH

GAS DRY Desiccant Tablet

Coal Based Activated Carbon XP 900

Article News:

Ferric Chloride Manufacturer

Activated Alumina Supplier In

HEDP 60 1 Hydroxyethylidene Diphosphonic Acid

ACTIVATED CARBON | ACTIVATED ALUMINA | CHLORINE TABLET | SILICA GEL

ALUMINIUM NITRATE Laboratory Chemical MSDS

Short Description:

More effective then ORDINARY alumina. Also refer new tec grade if ur requirement to absorb poisonous gases RXSOL-24-1905-025

International quality product of activated alumina customized as per your specifications. Our skilled quality control supervisors monitor the entire manufacturing process to ensure production of International Quality chemicals.

Activated Alumina supplier and exporter in Mumbai, Kandla - Gandhidham, Surat, Chennai, Ennore, Visakhapatnam, Kolkata, Turbhe Pawana Mahape MIDC Navi Mumbai and also we are major supplier of Activated alumina in Sharjah, Abu Dhabi, Dubai, Ajman, Fujairah, Muscat - Oman.

Activated Alumina is an aluminium oxide that is highly porous and exhibits tremendous surface area. Activated Alumina is resistant to thermal stock and abrasion and will not shrink, swell, soften nor disintegrate when immersed in water.

Surface area is in the range 345-415. Because it has a higher capacity for water than Silica Gel at elevated temperatures it is mainly used as a desiccant for warm gases including air. In many commercial applications zeolitic materials have now replaced it.

Application:

Purification of gases and liquids (removal of metallic traces, TBC and HF compounds).

Drying of organic liquids such as LPG, propylene, butene, steam cracked liquids, cyclohexane, gasoline, chloro- and fluorohydrocarbons, aromatic solvents.

Drying of air and gases such as steam cracked gases, catalytic reforming recycle gas, synthesis gas, natural gas, CO2.

Drying of organic liquids as LPG, aromatics, steam cracked liquids, gasoline, chloro- and fluorocarbons.

Drying of air and gases as steam cracked gases, catalytic reforming recycle gases, synthesis gases, methyl chloride, natural gas, LNG, etc.

Drying of hydrogen, oxygen, nitrogen, CO2, etc.

Purification of gases and liquids (removal of metallic traces, BF3, TBC, HCl, HF and fluorinated hydrocarbons).

Catalyst for Claus conversion in sub dew point processes.

Air drying (PSA, TSA)

Instrument air, supersonic wind tunnel, compressed air

Gas drying Air separation plants, inert and rare gases, Hydrogen, oxygen, nitrogen, CO2.

Natural gas in production and compression plants, LPG, LNG.

Aromatics, naphtha cuts and cracked gas.

2 -5 mm Highly Porous Aluminium Oxide

FAQ:

Properties of Ammonium bifluoride [NH4.HF2]

Add new comment
4553 reads

Acid Shield Metal Guard Acid Corrosion Inhibitor

Inhibitor for ACID

Acid Shield Metal Guard Acid Corrosion Inhibitor is an organic, liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.

Premium quality corrosion inhibitor for metals to protect against Hydrochloric Acid, Phosphoric Acid, Sulfuric Acid and other corrosive acids.

Alias:

Rodine 213, Acid Corrosion Inhibitor, RODINE 141, RODINE 145

Application:

The addition of Acid Shield Metal Guard Acid Corrosion Inhibitor, inhibitors to hydrochloric acid solution provides maximum protection for equipment during:

a. The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equipment.
b. The removal of scale and deposits from equipment in refineries, utility companies,paper mills, chemical plants and other industries.

Acid Shield Metal Guard Acid Corrosion Inhibitor meet the requirements.

Packing Size:

210.00 Ltr.

Using Procedure:

For each 1000 gallons of either 5% or 10% by weight* hydrochloric acid solution, not less than the following amount of Acid Shield Metal Guard Acid Corrosion Inhibitorr should be used:

1 Gallon for a cleaning temperature of 150° Fahrenheit.
2 Gallons for a cleaning temperature of 175° Fahrenheit.
3 Gallons for a cleaning temperature of 200° Fahrenheit.

* A 5% by weight hydrochloric acid solution contains 14.1% by volume of 20° Be hydrochloric acid.

The exceptional strength and heat stability of AAcid Shield Metal Guard Acid Corrosion Inhibitor give the user a considerable safety factor in relation to temperature, acid strength, and time. Acid Shield Metal Guard Acid Corrosion Inhibitor may be added to either the diluted or concentrated hydrochloric acid. In either case, Acid Shield Metal Guard Acid Corrosion Inhibitor should be thoroughly mixed with the acid by stirring or agitation.

The hydrochloric acid solution inhibited with Acid Shield Metal Guard Acid Corrosion Inhibitor is best circulated through the equipment to be cleaned. When circulation cannot be accomplished, the equipment should be filled with the inhibited acid and allowed to react for sufficient time to remove the objectionable deposits. To estimate the proper acid concentration and cleaning time, samples of the deposits to be removed can be tested in the laboratory prior to cleaning. If heating of the equipment to be cleaned or acid solution is desired to speed the cleaning action, it should be done prior to the start of the cleaning operation

Note:

Storage and Disposal

Acid Shield Metal Guard Acid Corrosion Inhibitor and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit, Acid Shield Metal Guard Acid Corrosion Inhibitor become very viscous and may be difficult to pump. It is recommended that Acid Shield Metal Guard Acid Corrosion Inhibitor be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

Disposal information for Acid Shield Metal Guard Acid Corrosion Inhibitor is given on the Material Safety Data Sheet for each product.The industrial cleaning bath is acidic and contains hydrochloric acid and organic Acid Shield Metal Guard Acid Corrosion Inhibitor components. Waste treatment , neutralization is required. The industrial cleaning bath and sludge can contain ingredients other than those in the chemical as supplied and analysis of the solution and/or sludge is required before waste treatment and disposal.

Safety and Handling :

Before handling the chemical products used in this process, the first aid and handling recommendations on the Material Safety Data Sheet for should be read, understood and followed. The industrial cleaning bath is strongly acid and can burn skin and eyes. Refer to the Material Safety Data Sheet for hydrochloric acid for recommendations for protective action.

Related Products:

Corrosion Inhibitor for metal RUST Preventive

Short Description:

The addition of Acid Shield Metal Guard Corrosion Inhibitor, inhibitors to hydrochloric acid solution provides maximum protection for equipment during,The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equi

Acid Corrosion inhibitor manufacturer. exporter and supplier in India Kuwait, UAE, Oman, Mumbai Maharastra, Chennai Tamilnadu, Kolkata WestBengal, Visakhapatnam Andhrapradesh, Gandhidham Gujrat, Fujairah Dubai Sharjah Ajman Abudhabi, Oman Muscat Sohar, Canada, Nairobi Kenya Africa

Corrosion Inhibitor for ACID

324 reads

Search

RIGS Oil Field-34