RIGS Oil Field-34

Slip Barrier Coats HOLD BLOCK

Alias:

Slip Barrier Coats HOLD Block Resist, RBM HOLD BLOCK, GREEN BARRIER, HOLD SURFACE PROTECTOR, PRELOAD 300, HOLD BARRIER XR, Paint Protector

Active Matter:

72-81

Application:

Slip Barrier Polymer Coats HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size:

25.00 Ltr.

Using Procedure:

for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Related Products:

Bilge Coat RXSOL

Hold Wash Concentrate RX

ALKAATUFF DETERGENT

Cement Remover RX Hold

Pet Coke Remover

ALKAATUFF ALKALINE

COAL REMOVER rx hold 25 Ltr

Holdbright Plus

RX Tuff High Foam conc.

BioSol Cleaner

Article News:

Ship Hold Cleaning Alkaline Detergent price for Mumbai, Kolkata, Chennai, Vizag, Kandla

Alkaatuff good foaming qualities

Shipchandler in Vizag Port

Lime wash is not suitable for cargo like Sulphur loading

Short Description:

Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Information:

Polymer based water soluble liquid product which is resulting thin transparent and temporary film on cargo hold surfaces. Polymer based Thin film acts as barrier layer between the cargo and the ship hold surfaces.

Slip Barrier Coats HOLD BLOCK is a Heavy Duty protective Solution for the hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly.
$ Safe to use in occupied / covered areas.
$ Reduces turn around times.
$ Easy to Direct Spray.

Other Important materials, which help to control corrosion on the metal surface. Chemically SULPHUR producing STRONG acid in presence of moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedures.

RXSOL Bilge Coat (Sulphur Acid Neutralizer) Acts as Acid Neutralizer formed during sulphur voyages.

HOLD BLOCK chemicals supplier.

FAQ - Slip Barrier Polymer Coat

Capt. ravi.prakash 4:54 PM (3rd JAN'19)
to RX MARINE INTERNATIONAL
Dear Sir,
Ref our telcon, please find attached Hold photos after discharging of Australian Coal and cleaning (without applying any chemicals) in oct 2018 . Then vsl loaded Indonesian Coal and will be discharging same in abt a week. Next voyage is getting fixed to load Urea from Saudi. Basis the photos, which chemical would you suggest to be used. We were thinking of RXSOL PCS along with Alkaatuff. Fyi, Owners have supplied 1200 Ltrs of Alkaatuff HF last month.
Thanks & best regards,
Capt. ravi.prakash
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Dear Sir,

In image we can observe that BOTTOM line of hold is rusted, And your plan to load CLEAN CARGO like urea which is ammonia-ted product can result further heavy rusting. So here our suggestion is to go with PCS with Alkaatuff HF. And after cleaning hold rust can be treated with RUST CONVERTOR by the ratio of 1:100 Ltr with water, this will change free iron rust content to orginal metal colour. ( For treatment of rust Each Hold maximum 50 Ltr RUST CONVERTOR REQUIRED ) and Finally HOLD can be treat with SLIP barrier Polymer COAT polymer, with dilution ration of 1:100 Ltr with Water. ( For Each Hold polymer coating maximum 50 Ltr Slip Barrier Polymer Coat REQUIRED )

Refer this link to get IMAGE of CARGO HOLD. http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

USES of slip barrier coat provide transparent POLYMER layer in between UREA and HOLD surface.

Application of SLIP Barrier Polymer COAT is always be wise decision, this will not only protect hold metal surface from UREA contact, but also helps to release cargo without adhesion on cargo.

Thanking you

WBRGDS

Silvi

http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

Slip Barrier Polymer Coats HOLD BLOCK supplier in all major port of India and Middle East. We are keeping ready stock at Kandla, Mundra, Sikka, Navlakhi, Hazira, Mumbai, JNPT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Slip Barrier Polymer Coats HOLD BLOCK also works as surface releasing agent and due to its chemicals resitance nature protect metal surface of ship from hazardous cargo.

Protective Chemicals suitable for both sulphur and petcoke cargoes

FAQ:

Can you please advise us on best chemicals for cleaning hold block applied to ship's bulkhead and tanktop. - Capt Manjit Handa, Marine Surveyor - Noah's Ark Solutions

Comparision Lime wash and slip barrier coat Holdblock

Salt loading precaution

Read more
10967 reads

RXSOL Zyme 700 FN

RXSOL Zyme 700 FN is a concentrated biologically active powder formulation containing a blend of patented bacterial strains, specifically developed to deal with sewage wastes.

Alias:

GAMAZYME 700FN, Biotal MDC 2000 / Washing Cream Bactericidal, (Shahran) TDS-111, Gamazyme TDS 5 Kg JAR

Active Matter:

100

Application:

Directions for use :

Rxsol Zyme 700 FN is formulated to degrade excess residual waste products in shipboard sanitation pipe work systems, holding tanks and marine sewage treatment plants. The specialised strains in Rxsol Zyme 700 FN will digest grease, fats, sewage, starch and other organic compounds. The degradation of paper, protein and waste product residuals is greatly increased, and the odours that these produce, are reduced.

The bacteria in Rxsol Zyme 700 FN will colonise the waste organic material which lines the pipework/tank system and degrade the waste until the system is clean. The biological activity in the marine sewage treatment plant is greatly increased, so the plant can thus handle more waste. The obnoxious smells in toilet areas and scuppers, normally associated with overloaded or blocked systems, are reduced.

Packing Size:

5.00 Kg.PWD

Using Procedure:

Sewage treatment plant :

Direct dosing to the sewage treatment plant or via the nearest toilet will greatly enhance the biological activity and keep the plant at peak operating efficiency.

A) On ships except passenger vessels

Ineffective or septic sewage treatment can be reactivated and maintained in peak operating efficiency by dosing Rxsol Zyme 700 FN direct in the tank or via the nearest toilet. To reactivate the plant, 1 kg Rxsol Zyme 700 FN should be mixed with 10-15 litres of hand hot (35°C) fresh water, left for 10-15 minutes (stirring periodically) for the bacteria to activate before dosing into the tank daily until the system is operating efficiently. Maintenance dosing of 0.1 - 0.25 kg weekly will keep the system operating effectively. Replacing the toilet cleaner in use by Rxsol Zyme BTC (biological toilet cleaner) will dose millions of specialised bacteria into the system. These powerful bacteria will digest organic material lining the pipes and boost the bacterial activity in the sewage treatment plant, keeping it operating at peak efficiency.

Passenger vessels

The applications is the same as mentioned above, but the dose rates are different. The dose rate depends on the number of people on board the vessel. As a rule of thumb use 50 gram per m3 of the volume of the sewage tank. Then a weekly dosage of 10 gram per m3 of the volume of the sewage tank.

For cruise vessel with a sewage tank on 100 m3 and 2500 people and on a two weeks cruise dose as below

Initial dosage: (50 g/m3 x 100 m3 ):1000 = 5 kg
Weekly dosage: (10 g/m3 x 100 m3 ):1000 x 2 weeks = 2 kg
On this cruise, will be used. 7 kg of Rxsol Zyme 700 FN
Tank Cleaning

Holding tanks can be cleaned periodically or prior to entry without the use of dangerous toxic chemicals. Grey and black water holding tanks, sewage tanks, sewage treatment plant should be flooded and pumped empty to clear excess soil before cleaning. Holding tanks must be fitted with an air manifold connected to a low pressure air line of sufficient volume to gently turn the mass of water within the tank. In sewage treatment tanks the normal air supply will suffice.

The tank should be filled to 75% capacity with fresh or sea water and the air supply turned on. Approximately 0.5 kg of Rxsol Zyme 700 FN in 5 to 10 litres of fresh hand hot (35°C) water should be mixed and left for 10-15 minutes before dosing into the tank. Dosing can be either direct or via the nearest toilet. The tank should then be filled and left with the air on for at least 48 hours. The dose rate should be approximately 0.5 kg per 500 litres tank capacity with a minimum dose of 5 kg. Although Rxsol Zyme 700 FN formulated for use in cold (15°C minimum) sea water, performance will improve with lukewarm (35°C) fresh water or sea water.
Pipe cleaning

Maintenance dosing will keep galley and sewage pipes clean and clear of organic residual wastes. A liquid solution should be prepared by mixing of 0.5 kg of Rxsol Zyme 700 FN in 15 to 20 litres of hand hot (35°C) fresh water. Stir it and, if possible, leave for 15 minutes to reactivate the bacteria. Whilst constantly agitating this solution, 1 litre should be dosed into sinks, scuppers, showers, drains, waste disposal units, etc. each evening until the blockage is cleared. A maintenance dose once or twice a week can then be applied to keep the pipes in clean condition. Harsh toxic cleaners (acids, caustics, disinfectants) should not be used as these will kill off the bacterial action in the pipes. Alternatively, the pipes should be isolated and filled with the solution and left for up to 48 hours before draining. If necessary, further applications should be made until drains run clear.

Note:

NOTE: Severly scaled systems should be acid cleaned.
Features and Benefit :
•   Powder formulation for easy use.
•   Biodegradable.
•   Reactivates biological activity in systems which have been rendered inactive by overloading, washout or use of   aggressive cleaning products.
•   Eliminates the odours associated with sanitary systems which are overloaded or blocked.
•   Cleans sewage holding tanks without the need for manual entry.
•   Clears pipes and systems blocked by organic waste matter.
•   Clears organic materials in slow draining pipes and scuppers.
•   Restarts septic sewage treatment plant.
•   Keeps complete sanitary systems in optimum operational condition.
•   Eliminates the need for hazardous chemicals.
•    Cost-effective, saves time, money and manpower.

Short Description:

Concentrated biologically active powder formulation containing a blend of patented bacterial strains, specifically developed to deal with sewage wastes.

Enzyme Sewage Treatment Powder Bacteria Sewage Treatment Chemical Liquid - RXSOL Zyme 700 FN manufacturer and supplier in Fujairah, Abudhabi, Ajman, Sharjah, Dubai GULF Middle East, Muscat Suhar Sohar Oman Barka, Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Gandhidham, Paradip, Nairobi Kenya Africa, Canada

Enzyme Sewage Treatment Powder

RIGS Oil Field-34

8407 reads

DI ISOPROPANOL AMINE

DI-ISOPROPANOLAMINE DIPA chemical is used as part of Sulfinol solution for acid gas removal in Hydrogen plant to remove mainly H2S amd CO2. Diisopropanolamine (DIPA) is a basic chemical used in many applications serving as emulsifiers, stabilizers, chemical intermediates and neutralizers that achieve basicity, buffering and alkalinity objectives. Because DIPA is a good solubilizer of oil and fat.

Alias:

DIPA, DI IsoPropanolAmine 25 Ltr

Active Matter:

Application:

PRODUCT NAME	:	DIISOPROP ANOLAMINE
CAS number	:	110-97-4
UN number	:
Formula	:	C6H15NO2
Odour	:	AMINE LIKE
Solubility in water	:	COMPLETE
Density	:	0.989 at 20 oC
Boiling point	:	84 oC
Melting point	:	42 oC
Viscosity	:
Flashpoint	:	127 oC
Explosive limits	:	1.1 – 5.4 Vol%
Vapour pressure	:	.02 mbar at 42oC
Skin absorption/irritation	:	YES
TLV Country	:
Pollution category 1994	:

Packing Size:

25.00 Kg.Liq

Using Procedure:

Major applications include metalworking products. DIPA is also used in coatings, pesticides, Paint Strippers, Paper, Photographic intermediates, plastics, polyurethane additives, reaction.

Field wise appliction ::

Coatings ::

Diisopropanolamine is a neutralization agent for anionic stabilized resins. It is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). DIPA additionally supports the film forming of stoving enamels.

DIPA is an intermediate in the production of a special ß-hydroxyalkylamide which is used as a crosslinker in polyester powder coatings.

Due to its pendent functionality, DIPA can be used as a cross-linking agent and as a building block for polyurethanes.

Gas Treatment

Natural gas can be purified by removing carbon dioxide and hydrogen sulfide by means of diisopropanolamine in the sulfinol process.

Metal Working :

Diisopropanolamine (DIPOA) is used as a corrosion inhibitor in the metal processing industry.

intermediates, surfactants, textiles and urethanes. Major applications include metalworking products. DIPA is also used in coatings, pesticides,

paint strippers, paper, photographic intermediates, plastics, polyurethane additives, reaction

intermediates, surfactants, textiles and urethanes.

 Rubber Chemicals- As an intermediate in preparation of vulcanization accelerator.APPLICATIONS

 Agro Chemicals- In the Synthesis of insecticides like Delta Methrin and Thiocarbamates with

herbicidal properties (Diallate).

 Pharmaceuticals- As a raw material in the manufacture of Vasodilator Hypotensive drug like

Diisopropylamine Dichloroacetate Intermediate Diisopropylamine Ethanol.

 Rubber Chemicals- As an intermediate in preparation of vulcanization accelerator.

Short Description:

DIPA chemical is used as part of Sulfinol solution for acid gas removal in Hydrogen plant to remove mainly H2S amd CO2.

#DIPA_supplier ABUDHABIdubaiSharjah
#DiIsoPropanolAMINE_MuscatOman

DI ISOPROPANOL AMINE manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Bahrain, Kenya Africa. Get the best quality of DI ISOPROPANOL AMINE at a competitive price from us. We have ready stock of DI ISOPROPANOL AMINE in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

DIPA

Read more
9882 reads

Rig Wash Liquid

CONCENTRATE CLEANER & DEGREASER :::---

Powerful and concentrated oil cleaning formulation for Quick removal of oil, grease, grimes from oilfield and industrial surface area. Due to its high emulsification property it cleans and disolves grease, oily dirt, and thick grime build up from heavy equipment, machinery, tools, concrete floors and metal surfaces.

Alias:

EASY-CLEAN LIQUID, Rigwash Liquid 25 Ltr

Active Matter:

68-73%

Application:

Rig Wash cleaner is bio degradable eco friendly Solvent free cleaning detergent, specialized for cleaning of RIGS oil field platform and machinery workshops, machinery and accessory parts.
Rig Wash cleaner is suitable to use by hand spray manually or through high-pressure machine.

Packing Size:

25.00 Ltr.

Using Procedure:

RIG WASH Chemically formulated to dissolving grease and carbonecious materials. As this product is free from any solvent and non corrosive materials so does not attack paints, rubber or plastics

Note:

Maintenance Cleaning chemicals for RIGS and oil field industries. RIGWASH Powder is powerful degreasing and emulsifying cleaning chemicals. RXSOL BRAND is most popular brand in MARINE and Oil Field industries as RIGS and Oil Field CHEMICALS supplier. RXSOL BRAND have various grade of RIGS CLEANING Detergent which includes RIG WASH LIQUID

Rigwash is classified cleaning detergent for offshore oil and gas rigs, platforms, and associated equipment. RIGWASH developed such a way to use by high-pressure water jets, detergents, and degreasers to remove dirt, grease, oil, and other contaminants that may have accumulated on the surface of the rig or equipment.

Regular use of Rigwash is important for maintaining the safety and efficiency of the equipment and reducing the risk of corrosion and damage.

Related Products:

Lube Oil Filter Cleaner

Rig Wash Citrus Formula 25 Ltr

Rig Wash Green 25 Ltr

Rig Wash Liquid Concentrate

Rig Wash Powder

Enviro Rigs Cleaner

Rig Wash Citrus Formula

DEEP CLEAN Drilling Fluids Cleaner

Safety Accessories:

Goggle Chemical Protective

Helmet

Video Links:

RXSOL Rig Wash Cleaning and maintenance procdure

Rig Wash Cleaner RXSOL

Article News:

Drilling platforms cleaning liquid Rig Wash

Rig Wash Liquid Manufacturer supplier UAE Sudan Oman Kenya

RIG WASH POWDER

Rig Wash supplier in Rajahmundry

Short Description:

Rig Wash cleaner is bio degradable eco friendly Solvent free cleaning detergent, specialized for cleaning of RIGS oil field platform and machinery workshops, machinery and accessory parts.

RIG WASH Cleaner manufacturer and supplier in Mumbai, Kolkata, Chennai, Kandla, Visakhapatnam, Fujairah, Dubai, Sharjah, Salaya, Abu Dhabi, Ruwi Barka, Sohar, Muscat Oman, Yemen, Sudan, Nairobi Kenya, Canada

Cleaning Detergent for Rigs and Oil Field

Read more
12035 reads

Antiscalant Antifoulant Corrosion Inhibitor 704

Alias:

Genesys RC - Antiscalent, Antiscalant IBC Hypersperse MDC704, KylinTreat M704 Reverse Osmosis Antiscalant Phosphorous free

Active Matter:

81-85

Application:

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.

Packing Size:

25.00 Kg.Liq

Using Procedure:

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature	Maximum Dilution %
<30°C	10
30 – 35°C	25
>35°C	50

Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Note:

Future & Benefit

Excellent results as a replacement for softenerfilters
Compatible with SoliSep* MPT150 coagulant
Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
Compatible with all of the leading RO membranes
Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
Effective over a wide pH range
May be fed neat or diluted
Compatible with feedwaters that contain aluminum and iron oxides

Handling :

Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Related Products:

Evaporator Treatment Chemical

ENGINE SCALE Guard NB

Membrane Antiscalant ALKA 191T

Corrosion Inhibitor 8050

Corrosion Inhibitor Multifunctional Closed Chilled Systems

Safety Accessories:

Gloves Disposable

Goggle Chemical Protective

Article News:

Types of Corrosion Inhibitor

What is Corrosion Inhibitor?

Antiscalant Supplier

RX Marine Contact Details

Water treatment chemicals

Short Description:

Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Reverse Osmosis Antiscalant, Phosphorous free

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is a highly effective antiscalant developed to control scale precipitates of Silica, Calcium Carbonate, Calcium Sulfate, Barium Sulfate and Strontium Sulfate, and reduce particulate fouling in the membrane separation systems of reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF).

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is phosphorous free. It is formulated by high performance multipolymers.

Highly effective over a wide-range of waters – for calcium-based and sulfate-based scales, notably, barium sulfate.

RO ANTISCALANT

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Effectively control CaCO3 up to LSI +3.0, CaSO4, SrSO4, BaSO4, CaF2, SiO2, Fe2O3, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 RXSOL is compatible with all of the leading reverse osmosis membranes, such as Dow, Filmtec, GE, Hydranautics, TORAY, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

Antiscalant Antifoulant Corrosion Inhibitor 704 helps to extend the membrane life and reduce the running cost.

Antiscalant Antifoulant

Read more
3834 reads

Sodium Lauryl Ether Sulfate 70 %

Sodium Lauryl Ether Sulphate RXSOL-12-1880-235 is an anionic surfactant. It is water-soluble. It has excellent foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants. However, due to its anionic character, it should not be used with cationic components like cationic surfactants, cationic dyes, etc.

Alias:

SLES 70, Sodium Lauryl Ether Sulphate Paste, Texapon N70

Active Matter:

70-72

Application:

Sodium Lauryl Ether Sulphate RXSOL-19-1880-050 is used for a wide range of applications such as:

In shampoos, foam baths and shower gels as a basic surfactant and foaming agent.
In liquid detergents and dish washing formulations for detergency and foaming.
In bathing bars, body wash, liquid soap, etc.

Packing Size:

220.00 Kg.Liq

Using Procedure:

Chemical Name	: Sodium Lauryl Ether Sulfate
INCI Name	: Sodium Laureth Sulfate
CAS Number	: 68891-38-3
EC Number	: 500-234-8
Chemical Formula	: R-OCH2CH2OCH2CH2OSO3Na

(R = C 12-14 natural)

Note:

PACKING :

Sodium Lauryl Ether Sulphate RXSOL-19-1880-050 is available in 220 kg /160 kg HMHDPE carboys. Total of 80 / 118 carboys i.e. 17.6 MT /17.7 MT can be shipped either palletized or non-palletized in 20 ft. full container load. It can also be shipped in IBC of 1 MT capacity and ISO containers with capacity of 22 to24 MT.

HANDLING AND STORAGE

Store in a clean, dry area, away from sunlight and heat. The recommended storage temperature is 20°C – 35 °C. Keep carboys tightly closed. In the original sealed carboys and kept at recommended storage conditions, the product can be stored for at least 1 year. Spills should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, seek adequate and timely medical attention. Stacking should be maximum 1+1 carboys.

Related Products:

Glycerine

Sodium Dodecyl Sulfate Powder

Sodium Dodecyl Sulphate

Acid Slurry LABSA 96 to 98 250 Kg

Safety Accessories:

Carboxy Methyl Cellulose CMC

SODA ASH 25 Kg

Short Description:

Excellent Foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants

SLES, Sodium Lauryl ether Sulfate, Sodium lauryl ether sulfate suppliers in Mumbai, Kandla, Gandhidham, Kolkata, Howrah, Vizag, Chennai, Tuticorin. RXSOL brand Sodium lauryl ether sulfate or RXSOL brand SLES is one of the most supplied chemicals by us. We are one of the largest Sodium lauryl ether sulfate suppliers and exporters in Mumbai, Kandla, Gandhidham, Guajarat, Kolkata, Vizag, Chennai etc. sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india
sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl sulphate manufacturer gujarat
sodium lauryl ether sulphate manufacturing process
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium dodecyl sulfate
ammonium lauryl sulfate
sodium lauryl sulfoacetate

sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india

SLES Sodium Lauryl Ether Sulphate exporter and supplier in South Africa, UAE Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Muscat Barka Sohar, Oman, Mumbai, Kandla Gandhidham, Visakhaptnam, Chennai, Kolkata, Canada, Nairobi Kenya, Sudan Yemen

SLES sodium Lauryl Ether Sulphate developed in chemicals field to cover demand of personal care and home care products like Shampoo, Bubble Bath, Shower Gel, Face Wash, Dish Wash, Liquid Detergent and Hand Wash. SLES not only used in detergent and cosmetic industry but also popular in the printing and dyeing industry, petroleum and leather industry as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent.

SLES Paste 70 Percent

Read more
1216 reads

Labdet Lab Cleaning Solution

LABDET is highly concentrate Product use for cleaning the lab glassware and lab equipment. It is consists primarily of a homogeneous blend of surfactant,and ethoxylated alcohol. Labdet is anionic in nature.

Alias:

Laboratory detergent, LAB CLEANING SOLUTION PHOSPHATE FREE NEUTRAL 5 Ltr

Active Matter:

72 - 81

Application:

Used to clean:
Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, disk drives, clean rooms, medical devices, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used for phosphate sensitive analysis ware.

Used to remove:
Soil, grit, grime, slime, grease, oils, blood, tissue, particulates, deposits, chemical and solvents.

Surfaces cleaned:
Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, cement and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Used for art restoration. Corrosion testing may be advisable.

Packing Size:

5.00 Ltr.

Using Procedure:

Cleaning method:
Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace.Will foam—not for spray or machine use.

Directions:

Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in cold, warm or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing may be advisable.

Note:

Benefit :

Concentrated to save you money
Use to pass your cleaning validation tests for lab accreditation and plant inspection approval
Replaces corrosive acids and hazardous solvents
Phosphate free, biodegradable and readily disposable
Free rinsing to give you reliable results and no interfering residues.

Precautions:
No special precautions other than good industrial hygiene and safety practices employed with any industrial chemical (see Directions).

Related Products:

Wall Wash Kit Super

Chromosulfuric Acid For Cleaning Glass Vessel(2.5 Ltrs Packing)

SS half Cut Funnel For Wall Wash

TPOL 20 Ltr BUCKET

Sulphuric Sulfuric Acid LR 500 ML

Safety Accessories:

Goggle

Gloves Disposable

Short Description:

Highly concentrate Product use for cleaning the lab glassware and lab equipment.

#LaboratoryDetergent
#LABCLEANING_SOLUTION
#LabCleaningSolutionPhosphateFreeNeutral

Laboratory Detergent manufacturer, supplier and exporter in Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah, Dubai, Sharjah, Abudhabi.

PHYSICAL DATA

Color	Pale Yellow
Form	Liquid
Hard Water Effectiveness	Highly Effective
Biodegradability	Biodegradable
Foam Tendency	High Foaming
Shelf Life	Two years from the date of manufacture
Solubility in Water	Completely soluble in all proportions

OSHA Hazardous Ingredients	None
RCRA Hazard Class	Non-hazardous
RoHS	No RoHS hazardous ingredients
EPA Priority Pollutants:	None
DOT Hazard Class	Non-hazardous
Flammability	Non-flammable
Latex Content	None in detergent, packaging materials or adhesives
Oral Toxicity:	LD50 >5000 mg per kg Rat, Oral)
Eye Irritation	Mild to Moderate eye irritant if not rinsed
Inhalation Toxicity	Non-irritating
VOC Content	0%

Laboratory Detergent

6499 reads

Multi Purpose Degreaser

Alias:

Rydall MP

Active Matter:

72-81

Application:

Renovate Industrial Multi Purpose Cleaner is a solvent-free, heavy duty restoration cleaner for the removal of dry soot, carbon, fire residues, filtration soils RXSOL MP multi-purpose degreaser Industrial Cleaner is a water-soluble, alkaline solution that contains specially modified additives for improved oil holding capacity, surface wetting, and low-foaming attributes. Our Multi-Purpose degreaser is one of the strongest, non-solvent based, degreasers available on the market. RXSOL MP multi-purpose degreaser Industrial Cleaner is developed for extreme applications where only the harshest of alternatives would cut the deposits.

RXSOL MP multi-purpose degreaser Industrial Cleaner is a non-acidic, non-flammable, highly effective oil and fat remover, which is able to remove heavy organic components. RYDALL MP also provides a complete rinse off of the pollutants without any danger of combustion and without leaving any greasy films.and draught marks on carpets, fabrics and other surfaces.
• Highly effective pre-spray on polypropylene carpets.
• Can be used in conjunction with Colour "Safe Bleach OxiBrite" ( www.rxmarine.com/colour-safe-bleach ) Part No. - RXSOL-41-8731-025
• Cationic solvent-free formula “pulls out” soils by neutralising electrical charge.
• Deodorises on application.
• Red liquid with floral fragrance.
pH Concentrate: 12
pH Diluted: 10.5

Packing Size:

25.00 Ltr.

Using Procedure:

Normal soil:
Dilute 10 to 20ml A217 per litre of warm water (1:100 to 1:50).
Heavy soil and restoration: Dilute 50ml per litre of warm water (1:20).
Ceiling cleaning: Add 50ml "Safe Bleach OxiBrite" ( www.rxmarine.com/colour-safe-bleach ) Part No. - RXSOL-41-8731-025, per 5 litres of Renovate Industrial solution. (Observe cautions below).

Pressure washing:
Mix 1 part Renovate Industrial Multi Purpose Cleaner with 4 parts water and meter at desired setting.Always pre-test surface in an inconspicuous area before proceeding. Do not use on water sensitive fabrics, unsealed wood, aluminium or other delicate surfaces.Apply by sprayer, sponge or floor machine. Allow 2 to 5 minutes contact time for heavy soil, scrub if needed, then rinse surface thoroughly with clean water. Observe all safety precautions. ear suitable personal protective equipment and cover all sensitive furnishings.

Note:

RXSOL MP multi-purpose degreaser Industrial Cleaner is food-grade as a safe general cleaner (A1) for food processing facilities!

RXSOL MP multi-purpose degreaser Industrial Cleaner is a water-soluble, mineral oil-free, alkaline solution containing specially modified additives for improved oil holding capacity, surface wetting, and low-foaming attributes. This non-acidic, non-flammable degreaser is also a powerful oil and fat remover effective in removing heavy organic components. RXSOL MP multi-purpose degreaser Industrial Cleaner completely rinses off pollutants without danger of combustion and leaving behind a greasy film.

Related Products:

Degreaser Heavy Duty

Degresol High Flash Point Degreaser

Degreaser Solvent

Moya Oil Degreaser

Safety Accessories:

Degreaser Bio Degradable

Degreaser Low Foam, Floor Cleaner

Degreaser Non Phosphate

Degreaser Soy and VOC Free Tar Remover

Short Description:

Heavy duty industrial Multi Purpose cleaner for use on floors, walls, carpets, hard surfaces, porous surfaces and many other professional and disaster restoration applications. A highly concentrated can be use as multi purpose.

HOW TO USE RXSOL MP multi-purpose degreaser Industrial Cleaner

Liberally spray on virtually any water washable surface and let sit for 20-30 seconds. Wipe clean and rinse with water. For stubborn stains, repeat the procedure. It is as safe and as simple as that! The reason for the short wait time is because the RXSOL MP multi-purpose degreaser Industrial Cleaner is a highly effective oil and fat remover that is able to crawl under the residues on machines and equipment. This Multi-Purpose degreaser/cleaner includes specially modified additives for improved oil holding capacity, low foam, and maximum surface wetting. When sprayed on the equipment, RXSOL MP multi-purpose degreaser Industrial Cleaner starts to soak around and underneath the oily accumulations, lifting them from the surface allowing the deposits to be wiped and/or rinsed away!

Multi Purpose Renovate Industrial Cleaner manufacturer and supplier in Navi Mumbai, Kakinada, Gandhidham, Surat, Chennai, Visakhpatnam, Andhra Pradesh, Kolkata, Chennai, Fujairah, Sharajha, Dubai, Abudhabi, Ajman, UAE Gulf, Ruwi Barka Sohar, Muscat Oman, Nairobi Kenya, Sudan, Yemen, Canada

Multi Purpose Cleaner

Read more
641 reads

Calcium Hypochlorite Granules

Alias:

Altoch GP, Chlorine Granuels 45 Kg

Active Matter:

70-80%

Application:

RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms. Since calcium hypochlorite as a solution is a very efficient killer of virtually all bacteria, algae and other objectionable micro-organisms, it is used as a standard for comparison testing of other sanitizing chemicals. While calcium hypochlorite is used primarily to chlorinate swimming pool, spa and hot tub water, and to treat water supplies and sewage, it is also frequently used as a bleaching agent and sanitizer in industrial applications.

Rxsol Calcium Hypochlorite granules can be used for continuous chlorination or applied manually.Swimming Pool, Spa and Hot Tub Operators use calcium hypochlorite as a routine sanitizer to kill and prevent the growth of algae, bacteria, and other microorganisms. It is also widely used as a shock treatment to destroy organic contamination in pool water, thereby improving the water clarity. Strong calcium hypochlorite solutions serve as disinfectants for cleaning pool sides and bottoms, decks, diving boards, ladders, floats, locker and shower room floors and benches, sinks and toilets.

Municipal Water Treatment —

Municipalities use calcium hypochlorite in place of chlorine gas or liquid bleach to purify water. It is also effective for treating wells; sanitizing new water mains; controlling algae, especially sudden growths, in reservoirs, filters and other equipment; treating sewage and controlling odors.

Wastewater Treatment —
Calcium hypochlorite is used to treat wastewater effluents under controlled conditions by textile mills, paper mills, tanneries, food processing plants and more.

Other Applications —

Other uses for alcium hypochlorite include sanitizing food and beverage containers and production equipment in dairies, restaurants, hospitals and farms. Calcium hypochlorite also is used to control algae and slime in commercial and industrial cooling water systems.

Packing Size:

45.00 Kg.PWD

Using Procedure:

HS Code 28281090

Drinking Water disinfectant easiest process is to add 1-pound of calcium hypochlorite in granular form in to 10,000 gallons of drinking water. And Calcium Hypochlorite is widely available for use as swimming pool chlorine tablets or white powder that is much more stable than chlorine.

Variety of disease causing organisms including bacteria, yeast, fungus, spores, and viruses growing in water. RXSOL brand have easiest method to test such polluted water by simple test method.

Note:

Typical Properties

Chemical Name	:	Calcium Hypochlorite
Chemical Formula	:	Ca(OCl)2
Granular Bulk Density	:	lb/ft3 64
Chemical Assay of Calcium Hypochlorite
Active Ingredient Calcium Hypochlorite	:	73% nom
Inert Ingredients, Readily soluble salts	:	27%
Minimal Available Chlorine	:	70%
Solubility in Water Granular calcium hypochlorite dissolves readily at	:	77°F.
Sample Solutions	:	1 lb. in 80,000 gallons = 1 ppm AvCl. 2 dry oz. in 1 gallon = 1% solution or 10,000 ppm
pH Solutions
AvCl, ppm	:	pH
100 200 600 1000	: : : :	9.7 10.00 10.4 10.7

Related Products:

Trichloroisocyanuric Acid Tablet

Sodium Hypo Chlorite 12-15%

Chlorine Tablet

Sodium Dichloroisocyanurate Dehydrate

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Chemical Protective Suit

Video Links:

Calcium Hypo chlorites Chlorine source Granules

Article News:

Calcium Hypochlorite granular form supplier

Short Description:

RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms.

Other valuable water treatment products also available with us :

Calcium Hypochlorite 65 - 70% CHLORINE POWDER, 45 kg / drum

Calcium Hypochlorite 70 % 2G (Pack / 200 tables X 1.7 g )

Calcium hypochlorite 70% 200g tablet

Chlorine tabs Oasis 33mg ( carton /1000 tab)

CITRIC ACID MONOHYDRATE, 25kgs/bag

Citric Acid Anhydrous with 25 kgs /bag

Softener salt treatment SALT TABLET 25/BAG Packing : 25kg / bag

Purolite resin C100E, 25KG Bag

Sodium Hexametaphosphate ( SHMP 68 %) with new date, Packing : 25kg bags

Carbon ,25 kgs/bag

Carbon with diameter 70-90 , 25kgs/ bags

SODIUM HYPOCHLORITE

CHLORINE LIQUID PACKING : 20 LITER CONCENTERATE : 10 TO 12 %

FORMALIN LIQUID PACKING : 25 LITER CONCENTRATE: 35 TO 37 %

HYPOCHLORITE ACID CONCENTRATE : 98% PACKING : 25 LITER
Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS)
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Methanol Packed : 25 liter 20

50 % Hydrogen Peroxide Packed : 25 liter

Hydrochloric acid Packed : 25 liter

Mixed bed PUROLITE with 25 Liter / kgs /bag ,ANION OH ,PUROLITE MB400

Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS)
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Calcium Hypochlorite Granules manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Calcium Hypochlorite Granules at a competitive price from us. We have ready stock of Calcium Hypochlorite Granules in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

#CalciumHypochlorite_Granules
#Chlorine_Granules
#ChlorineGranules_supplierMuscatDubai

Chlorine Granuels Powder

FAQ:

How to Disinfect Water Using Calcium Hypochlorite

Read more
5207 reads

Carbon Dioxide Absorbent

RXSOL Carbon Dioxide Absorbent is High Performance Grade Absorbent. RXSOL-81-8197-025 is a versatile CO2 absorbent for removal of carbon dioxide and other acidic contaminants from gas streams. It is a specialize compound consisting primarily of hydrated lime (Ca)OH)2) with other ingredient is an active compound of mixture of hydroxides , indicator. Indicating RXSOL-81-8197-025 absorbent contains ethyl violet indicator which changes from white to violet as its capacity for absorption is exhausted.

Alias:

Soda Line, Akors B, CO2 Absorbent Soda Lime, Sodasorb, Biosorb, Soda Lime CO2 Absorbent

Active Matter:

72-81

Application:

RXSOL-81-8197-025 absorbent is intended for the absorption of carbon dioxide in helium-oxygen breathing systems, hyperbaric chambers, and rebreathers in underwater diving. Its also removes CO2 from breathable gases in: MEDICAL, MILITARY, DIVING, MINING and SAFETY APPLICATIONS.

It is used to absorb expired CO2 during Anesthesia (in operation theatres). It is used for removing Carbon Dioxide from oxygen-based metabolism, in estimation respirators, breathing apparatus, diving rebreathers. RXSOL-81-8197-025 removes CO2 from manned closed atmospheres, such as submarine, and closed circuit breathing apparatus, such as rebreathers.It is extensively used in navies, for use by divers in submarines. RXSOL-81-8197-025 has major applications in breathable gas applications where CO2 levels need to be controlled, for example in medical anesthetic breathing circuits, mines, commercial and leisure diving rebreathers, or in submarines. In these applications, the breathable air is recirculated for re-use and therefore any exhaled carbon dioxide needs to be removed in order to prevent a build-up of carbon dioxide to toxic levels.

Packing Size:

5.00 Kg Granules

Using Procedure:

CO2 Absorption: >100 lt./kg

Note:

Handling and Storage Recommendations : `
Keep containers tightly sealed. Materials should be kept in a dry environment at temperatures above 32° (0°C). Avoid direct sunlight and other types of intensive UV light exposure. Particles are friable; reduce dust generation by minimizing excessive and rough handling during storage and transfer.

Other Information :

The information contained herein is based on our testing and experience, and is offered for the user’s consideration, investigation and verification. Since operating conditions and use vary and since we do not control such conditions, we must DISCLAIM ANY WARRANTY, EXPRESSED OR IMPLIED, with regard to results to be obtained from the use of this product. Test methods are available upon request.

Related Products:

Potassium Permanganate Crystals

Activated Alumina Desiccants

Silica Gel

Phenolphthalein Indicator

Soda Lime with Indicator

CO2 absorber

Safety Accessories:

Gloves Disposable

Goggle

Short Description:

High Performance Grade Carbon Dioxide Absorbent

Excellent C02 Sorbent

#CarbonDioxideAbsorbent_DubaiSharjahUAE
#CarbonDioxideAbsorbent_MuscatOman
#SodaLimeCO2Absorbent
#SodaLimeAbsorbent

Carbon Dioxide Absorbent C02 Sorbent SODA LIME manufacturer and supplier in Kandla, Mumbai, Chennai, Kolkata, Visakhapatnam, Fujairah, Dubai, Abu Dhabi, Sharjah, Ajman, Muscat - Oman UAE and Middle East.

C02 Sorbent SODA LIME

FAQ:

Soda Lime Medicinal use

6905 reads

Search

RIGS Oil Field-34