RIGS Oil Field-34

Potassium Chloride

Potassium Chloride is a high purity, dry crystalline inorganic/metal halide salt composed of potassium and chlolrine, KCl. It has a molar mass of 74.551 g/mol and occurs naturally as the mineral slyvite. Potassium chloride is often referred to as muriate of potash (MOP), particularly when used as a fertilizer.

Alias:

Potassium Chloride

Active Matter:

Application:

• Primarily used as a shale inhibitor as the potassium ion exchanges with calcium and sodium ions n the interlayer space in illites and smectites, converting them to more stable mica-type structures that do not hydrate and swell.
• Used to prepare brines for drill-in, completion, and workover fluids

Other names	Sylvite common name Muriate of potash Potassium Chloride
Identifiers
CAS number	[7447-40-7]
RTECS number	TS8050000
ChemSpiderID	4707
Properties
Molecular formula	KCl
Molar mass	74.55 g/mol
Appearance	white crystalline solid
Density	1.987 g/cm3
Melting point	775 °C
Boiling point	ca. 1500 °C
Solubilityin water	28.1 g/100 ml (0 °C) 34.0 g/100 ml (20 °C) 56.7 g/100 ml (100 °C);
Hazards
MSDS	ICSC 1450
EU Index	Not listed
Flash point	Non-flammable
LD50	2600 mg/kg (oral/rat), 142 mg/kg (intravenous/rat)

Packing Size:

25.00 Kg.PWD

Using Procedure:

Potassium Chloride also used as a water softener.

Note:

Advantage :
• Widely used in the industry
• Largely benign salt; solutions are neutral pH
• Does not significantly impair performance of polymers such as viscosifiers and filtration controllers

Article News:

Agro Chemicals Fertilizers Poultry Feeds Industrial Chemicals supplier in Dubai Sharjah AbuDhabi Muscat Oman

Short Description:

Potassium Chloride Exporter, Manufacturer

We are the one of the leading manufacturers and suppliers Potassium Chloride Crystals. Processed in a clean and hygienic medicinal environment, these crystals are highly effective. In addition to this. Owing to their enhanced shelf life, these products can be stored for a long time.

Features:

Compositional accuracy

Longer shelf life

Precise pH range

Compositions:

Purity: 99%

Presence: White Crystalline powder

Potassium Chloride is a salt of metal halide that combines potassium and chlorine. Featuring the formula KCl, this salt is odourless in nature and can be distinguished by its white and sometimes colourless vitreous crystal-like appearance.
The salt readily dissolves in water without leaving a residue

Features:

Inexpensive as compared to other salts

Produced and processed as per approved technology

Sold at economical prices

Packed in good quality boxes and containers

Potassium Chloride finds numerous uses, especially in the field of Agriculture, Medicine, Radiation, food & beverages, and more. Another well-known use of this salt is as a fire extinguisher.

We are major exporter of Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Potassium Chloride as a water softner

271 reads

Demulsifier Premium

Oilfield Chemicals Demulsifiers - Demulsifier to successfully separate oil from water. Also suitable for lightest sweet crudes to the heaviest sour crudes.

Alias:

Pasetreat 6410, Clarient P 6752, DEMTROL, Separate water in Oil Emusion, Dissolvant Clariant 200 Ltr pack

Active Matter:

90-93

Application:

RXSOL DEMULSIFIER is Water-In-Oil Demulsifiers, which can be used as stand-alone Demulsifiers to separate Formation Water from Crude Oil Emulsion. There are vast differences and Characteristics of Crude Oils produced in various Fields. Use and application Oil Soluble Demulsifier Testing & Selection is accomplished by standard Bottle Tests in Lab followed by Field Trial Tests. They are commonly used in the processing of crude oil for effectively separating formation water from emulsions in crude oil.

Demulsifier to successfully separate oil from water. Also suitable for lightest sweet crudes to the heaviest sour crudes.

Packing Size:

200.00 Ltr.

Using Procedure:

Dose recommendations have to be made on a case-by-case basis. The dosage of RXSOL DEMULSIFIER prescribed to break a particular emulsion varies from as little as 1 ltr per 20,000 Ltrs (50 ppm) of oil to as much as 1 Ltr per 10,000 ltrs (100 ppm) of oil. A few companies have even found that 20 ppm was more effective than the higher dosages, so we suggest adding the lower levels to your laboratory bench tests to verify the correct dosage for the specific application. Finding the most cost-effective dosage, as well as determining the best conditions of temperature, slow mixing, settling time, etc., is best done in the laboratory, using a sample of the actual oil or waste and a sample of Demulsifier.

Note:

Futrue and Benefit :

Contains surface-active materials
Separates water from oil
Free from defilements
Excellent stability
Precise chemical composition
Easy to Handle.

Storage and Handling :

RXSOL DEMULSIFIER shall be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be handled with dry absorbent like sand, sawdust, etc. On ingestion / eye contact with the product, medical attention should be sought immediately.

Short Description:

Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water.

Marine and Oil Field chemicals manufacturer and supplier. Demulsifer direcly indicates emulsion breaker into oil and water phase. This product is most commonly used in Oil field demulsification process.

Demulsifier most commonly known as oil water separator in Oil field industries.

Demulsifier best discounted price directly from manufacturer are available through email. As we have reagular supply of Demulsifier in Oil filed industries, so we are keeping ready stock of demulsifier at our all phyisical location of India and UAE. Click here to get our physical loaction and franchise details http://rxmarine.com/where-to-buy

DEMULSIFIER CHEMICALS FOR WET CRUDE TREATMENT OF THE FOLLOWING TYPES :

Material to be used in (LUHAIS, BIN-OMAR and ARTAWI) field.
Material should effective and workable for a period of (2 years) from the date of delivery.
Manufacturers to state and guarantee that the specification should be unchanged and must be developed to give good results and to fill full the requirements of (SOC)
In case of any deviation in (Winter or Summer seasons) manufacturers must compensate the balancing quantities.
Manufacturers should send their representatives to follow the activity of materials during the period of contract.
Specifications of out let oil must not exceed:50 ppm salt 0.2% water content
Crude Oil Specification as follow:

Item	Option	Percent
1	API	32.4°
2	S.G	0.8633
3	Inlet Salt	45,000-60,000 ppm
4	W.C	7-12%
5	TDS WASH WATER	3000 ppm
6	TDS formation water	250,000 ppm
7	Oil Temp. Winter	(20-30) C°
8	Oil Temp. Summer	(50-60) C°
9	Viscosity in 21.1 C°	16.64 cSt
10	Viscosity in 37.8 C°	10.30 cSt
11	Viscosity in 50 C°	8.022 cSt
12	Viscosity in 60 C°	6.251 cSt
13	Sulfur Content wt%	1.7
14	H2S Dissolvedin crude oil ppm	Nil
15	Wax content wt%	7.9
16	Carbon residue wt%	1.9
17	Pour Point C°	C° -26

8. dose of competition should be (25-50) ppm
9. Added Material has no any side effects on the pipe line and exported oil and all other equipment.
10. The bidding should be included supplying (20 drums) of the material to be tested in LUHAIS field and assessment (without depending any previous test) (without any cost), otherwise technical and commercial offers will be neglected.
11. The test of samples make by field and finger print
12.The origin of manufacturer flow improver material (America)
13. Provide with bidding names of companies using the flow improver material and location.
14. The material should be environment friendly type and clearly state the type of process and clarify the best method how to deal with it.
15. The bidding should specify clearly the material life time in the (normal and up - normal ) working condition and the replacement or regeneration recommendation )
16. Delivery period to be (30) days, CIP Basra (S.O.C warehouse). SUPPLYING OF THE QUANTITIES ACCORDING TO (SOC)
REQUIREMENTS AND THE SCHEDULE OF DELIVERY TO BE AS FOLOWS:
1500 Drums during 3 months
1500 Drums during next 3 months
1500 Drums during last 3 months
17. Penalty Rate 20%.

Demulsifier bases can be used to treat light, medium and heavy crudes manufacturer, Exporter and supplier in India - Middle East, Oman, Canada. Popular Demulsifier supplier in Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Muscat Sohar Barka Oman, Canada, Kenya, Africa, Uganda, Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai Ennore, Kolkata Haldia Paradip

Question : What is Difference Between Demulsifier and Reverse Demulsifier?
Answer :
Reverse Demulsifiers—-Break oil-in-water emulsions

Demulsifiers—-Break water-in-oil emulsions

Email us to get MSDS, Technical Bulletine of Demulsifier. Also feel free to mail us to get customized and private labeling option of Demulsifier.

Pioneer in specialty oilfield production chemicals to treat a wide variety of oil and gas production problems faced by Oil Field Industries customers.

Methodology for Evalution of Demulsifier :

Step 1 :Treat 100ml of the emulsion with 40 mg/litre of Demulsifer, (using 1% w/v solution in xylene in 100 ml graduatd conical tube) and give 100 shakes of approximately 12 in stroke

Step 2 : Place treated emulsion in water bath maintained at 70 +1oC for a period of 15 minutes and allow it to settle for 5 minutes at 30+2oC. measure the quantity of clear water settled

Step 3 : Conduct a blank test with untrented emulsion under condition similar to treated emulsion

Step 4 : Substract the water seprator if any in blank test from treated sample and denote it as V. Similarly subtract the water separated from blank from total water present in emulsion and denote it Vo.

Report Efficiency Percentage as Follow : % Effiency =(V/ Vo) x 100

Demulsifiers	Offspec Crude from Emulsion in Oil
Water Clarifiers	Off Spec Re-Injection or Disposal Water
H2S Scavengers	High H2S and Mercaptans
Corrosion Inhibitors	High Internal Corrosion Rates
Scale Inhibitors	Scale Deposition Downhole or in Process
Biocides	Bacteria Fouling or Associated Corrosion
Oxygen Scavengers	High Oxygen Content in Water
Wax Inhibitors	Wax Formation Downhole or in Process
Asphaltene Inhibitors	Asphaltene Formation Downhole or in Process
Pour Point Depressants	High Pour Point Crude in Winter Conditions
Drag Reducers	Pipeline Throughput Limitations
Defoamers	Foaming in Process Separators

#DUMULSIFIER_manufacturer
#demulsifier_supplier
#demulsifier_kuwait

Emulsion Breaker to treat light, medium and heavy crude

Read more
316 reads

Hydro Testing Oxy Scavenger Biocide

Hydro Testing Oxy Scavenger Biocide is a multicomponent, multifunctional formulation which prevents corrosion, microbiological growth in single product treatment programme. Inhibitor, corrosion, multicomponent, multifunctional: For prevention of corrosion and microbiological growth in water flood systems during hydrostatic testing and other applications.

Alias:

REMIDOL 4000, Hibitol 2000, Indion 175, Visco 3900, Nevamine, Hydrotesting Corrosion Inhibitor, Visco Nalco 3900, Tretolite WF-166, RX-5255

Active Matter:

78-83%

Application:

PERFORMANCE:

CORROSION: Effectively prevents corrosion due to Carbon Dioxide, inorganic salts, dissolved oxygen & Hydrogen sulphide contamination from sour fluid or bacterial action. The inhibitor acts as a cathodic polarizer

MICROBIOLOGICAL GROWTH: Effectively prevents the metabolic function necessary for reproduction of the bacteria cell. Successfully prevents anaerobic/aerobic and sulphate reducing bacteria.

Inhibitor, corrosion, multicomponent, multifunctional: For prevention of corrosion and microbiological growth in water flood systems during hydrostatic testing and other applications

Packing Size:

210.00 Ltr.

Using Procedure:

Hydro Testing Oxy Scavenger Biocide can be fed directly or through chemical doses pump. Doses may vary with the quality of water to be treated and the residence time of the water in the system.

Actual consumption is determined under operating conditions.

Note:

Benefit / Advantage of using Hydro Testing Oxy Scavenger Biocide:

Hydro Testing Oxy Scavenger Biocide is a liquid multifunctional chemical designed to completely treat hydrostatic test fluid, saltwater packer fluid, saltwater drilling fluid, during Hydro-testing and oil field water injection programme.
Hydro Testing Oxy Scavenger Biocide contains an effective filming corrosion inhibitor, oxygen scavenger and biocide, altogether in a single formulation convenient to dose with single chemical injection pump or skid.
Hydro Testing Oxy Scavenger Biocide is economical to use as handling is limited to one chemical.

Short Description:

Hydro-testing corrosion protection for Pipeline, Tank

Pipeline corrosion inhibitor manufacturer and supplier. Hydro Testing Oxygen Scavenger provide complete protection against rust and scale.

Chemical for conditioning of hydro test water i.e. blend of corrosion inhibitor, one Oxygen scavenger, one scale inhibitor & one biocide

The major factor which contributes to the corrosion in hydro-static test water is the dissolved oxygen and dissolved solids do not have much impact on the corrosion rate except the chloride content. The presumptions like not using the corrosion inhibitor if the water is not with high mineral content could beM disastrous as in fact any corrosion process, even a very mild one, will be accompanied by the set up of galvanic cells and formation of corrosion products deposits. Such environment makes the conditions ideal for the corrosion process to continue at accelerated rate once the process fluid will be run through the line.

Hydro Testing Oxy Scavenger Biocide is Hydro-testing oxygen scavenger for Pipeline, Tank. Hydro Testing Oxygen Scavenger Chemical for conditioning of hydro test water i.e. blend of corrosion inhibitor, one Oxygen scavenger, one scale inhibitor & one biocide manufacturer exporter and supplier Mumbai, Surat, Gandhidham, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Sharjah, Ajman, Abudhabi, Dubai UAE Middle East, Muscat Oman Sohar

Effect of Micro – Organisms:

All water used for Hydro-testing generally contains iron bacteria and sulphate reducing bacteria. The iron bacteria attack to the pipe wall mostly at 6 o’clock location and produces tubercle of iron oxide by metabolic action. Below the tubercles, sulphate reducing bacteria grows and generates H2S from sulphate of water. The H2S goes on reacting with iron forming Fe2S. This is combined with auto catalytic formation of HCI under tubercle and lead to deep pitting and perforation of the pipe wall. The mechanism is more pronounced under stagnant condition and is relevant of Hydrostatic testing.

Oxygen Scavenger and Biocide

400 reads

Sodium Dichloroisocyanurate Dehydrate

Sodium dichloroisocyanurate is the sodium salt of a chlorinated hydroxytriazine and is used as a source of free available chlorine, in the form of hypochlorous acid, for the disinfection of water. It is widely used as a stable source of chlorine for the disinfection of swimming pools and in the food industry.

Alias:

SODIUM DICHLOROISOCYANURATE Granual, Neo Chlor Marine Granual

Application:

Sodium dichloroisocyanurate is a chemical compound widely used as a cleansing agent and disinfectant. It is a colorless, water-soluble solid, produced as a result of reaction of cyanuric acid with chlorine. The dihydrate is also known as is the potassium salt.

Packing Size:

25.00 Kg Granules

Using Procedure:

Sodium dichloroisocyanurate possible to use as a disinfectant for drinking-water in emergency situations, and for routine use in some water supplies.

Note:

Sodium Dichloro-Isocyanate can affect you when breathed in.
Sodium Dichloro-Isocyanate can irritate the skin.
Contact can irritate and burn the eyes.
Breathing Sodium Dichloro-Isocyanate can irritate the nose and throat causing coughing and wheezing.

Related Products:

Chlorine Powder

Chlorine Tablets Calcium Base

Calcium Hypochlorite Granules

Sodium Bisulphite Solution

Safety Accessories:

Chlorine Tablet

RX Chlor Tablet

Bleach Hypochlorite Powder

Article News:

SDIC SodiumDichloroIsocyanurate Supplier

High quality Sodium Dichloroisocyanurate supplier Chennai Visakhapatnam

Short Description:

SODIUM DICHLOROISOCYANURATE Granual

SODIUM DI CHLOROISOCYANURATE manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.

Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.

SODIUM DI CHLOROISOCYANURATE is available in small packing as well as in bulk. Buy premium quality SODIUM DI CHLOROISOCYANURATE and other lab chemicals from one of the most trusted brands.

(NaCyCl3) (C3Cl2N3NaO3 • 2H2O)

468 reads

Advance Ship Tankclean

This product is very common to use for removing of traces HYDROCARBONS from the tank, after cleaning of TANKS from solvent base tank cleaning materials. when possibilities of next cargo will contaminate with hydrocarbon.

Alias:

Tankclean Advance Hydrocarbon Freeing Tank cleaner, Advanced BioCatalytics, Accell Clean

Active Matter:

33 - 35%

Application:

Effectively Water-based degreaser which is free from nonylphenol ethoxylates. Advance Tank cleaner is Non-flammable

Advance Tank clean supplier and stockist at all Indian and UAE - Middle East Coastal. Advance Tank Clean is free from any kinds of hazardous solvent and alkali mixture emulsifying oils particle and makes water soluble to remove from zinc-silicate coated tanks surface. Also effectively cleans metal castings, forgings and stampings, industrial parts, tanks and reactors. Very effective to clean Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents. Suitable for cleaning engine components like fuel and lube oil filters, injection nozzles, pump components, inlet and exhaust valves etc.

Packing Size:

25.00 Ltr.

Using Procedure:

After uses of solvent type cleaner to make Hydrocarbon free tank, RINSE the tank Throughly—preferably with running continuous water. For critical Tank cleaning, Make a fresh 1% solution of Advance Tank cleaner in cold, warm, or hot water. If available use warm water. For difficult soils, raise water temperature and use more detergent.

Otherwise for Spot Cleaning: Spray Advance Tank cleaner directly or it can be diluted up to 5 parts, And leave up to 30 minutes to complete the reaction then finally flush off with water. Always remember do not allow to dryon surface, then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.

Re-circulation Method:–

Fill tank with fresh water and heat up to warm 30-40oC . Then start adding Advance Tank cleaner 0.03 to 9% ( for general wash use 300 ML for 1000 Ltr water and ratio can be increase upto 9 Ltrs for 1000 Ltr water ) to circulate the water. A stronger solution can be made for critical cleaning. Finally lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. Use a strainer at the pump stack when circulating any solution. Finally rinse the tank with hot water.

Note:

RXSOL-20-2084-210 is a balanced formulation of emulsifier and natural solvent detergent agents which makes excellent for use with all types of metals

Concentrated to save you money
• Biodegradable and readily disposable
• Penetrating wetting power to save you time

Related Products:

Tankclean Alkaline Swift

Tankclean ECO

Safety Accessories:

Alkaleen Cleaner Safety Liquid

SEA VOYAGE CLEAN Plus

Short Description:

Biodegradable surfactants based tank cleaner

Tank Lining – Stainless / Epoxy / Phenolic / Zinc Coating

Popular Bio catalyst based tank cleaner.

Advanced Tank cleaner is one of popular MARINE TANK CLEANING product.

Advance Tankclean Marine Chemicals manufacturer and supplier in Mumbai - MIDC, Turbha Pawana, Kandla - Deen Dayal Upadhya, Gandhidham, Mundra, Sikka, Vadinar, Chennai, Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Paradip, Buz Buj, Fujairah, Dubai, Sharjah, Abudhabi, Ruwi Barak Ghala Muscat - Oman, Sudan Yemen, Canada, Hazira Surat

Hydrocarbon Freeing Tankcleaner

Read more
918 reads

Lithium Molybdate

Lithium molybdate is used as corrosion inhibitor in LiBr absorption chiller for industrial central air conditioning.

Alias:

Li2MoO4, Vapour Absorption Chiller

Application:

Lithium Molybdate Solution chemically acts as Corrosion Inhibitor for Central Air Conditioning chiller system.

Packing Size:

25.00 Kg

Using Procedure:

Lithium bromide as a salt is widely used in absorption and cooling with water. It is used as desiccant in air conditioning system and reagent in organic synthesis.

Related Products:

BRINE CORROSION INHIBITOR RX

Cooling Treat 2910

Biological Guard Antifouling

Safety Accessories:

Nitrite Borax RoccorRX NB Liq

AC2 DESCALEX Powder

GLUTARALDEHYDE

Short Description:

Lithium molybdate is used as corrosion inhibitor in LiBr absorption chiller for industrial central air conditioning.

Lithium Molybdate manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Lithium Molybdate at a competitive price from us. We have ready stock of Lithium Molybdate in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Li2MoO4

769 reads

Salt Granules

Salt Granules Manufacturer, Supplier and Exporter. We are sole manufacturer of RXSOL Salt Granules in India as well as UAE and Muscat.

Alias:

USP Sodium Chloride, White Crystal Salt

Active Matter:

99.5

Application:

RXSOL Salt Granules are used in water softeners to soften the water in industries, hospitals, hotels as well as households. Soft Water provides a range of benefits in our daily life. Soft water helps in reducing costs of serving, maintenance and replacement of boilers, dishwashers, water heaters and pipes & showers and improves their life.

Packing Size:

25.00 Kg Tablet

Note:

RXSOL Salt Granules benefits and uses.

Salt Granules Softened water will eliminate the build-up of limescale in pipes and on heating elements found in dishwashers and washing machines which will improve their life and reduce maintenance and power costs. As expert suggest that 1.5 mm scale reduces the efficiency of your boilers by 10% which would increase power consumption, maintenance cost and reduce life of the boiler.

Salt Granules treated Soft water reduces consumption of soap and detergent powder as it improves lather and cleaning efficiency. Bathing with soft water gives your hair and skin a soft and silky feel. Soft water can clear up minor skin problems such as irritation and dryness which can lead to eczema.

Laundry with soft water would help improve life and feel of clothes and reduce soap consumption. Spend less time cleaning scale from sinks and baths and thereby reduces the cost of maintenance and your equipment & fixtures.

Related Products:

Salt Tablets

Rock Salt

Safety Accessories:

Chlorine Powder

Chlorine Tablet

Short Description:

Sodium Chloride water softner Salt

Salt Tablet VIDEO link.

Salt Granules Sodium Chloride water softner Salt Granules manufacturer, exporter and supplier in India, UAE and Oman Qatar, Saudi Arabia, Jordan, Syria, Bahrain, Yemen, Pakistan, Egypt, Azerbaijan, Turkmenistan, Kenya, Nigeria & North Africa, Dubai, Sharjah, Ajman, Abudhabi, Sharjah, Fujairah, Ruwi Barka Muscat, Oman, Canada

Salt Tablet Identifiers CAS number 7647-14-5 and its Molecular Formula is NaCl

Water Softner Slat

550 reads

ACID Neutralizer Amine

RXSOL-24-1461-180 ACID Neutralizer Amine is a colorless to pale yellow, hygroscopic viscous liquid with slight ammoniacal odor. We are manufacturer and supplier and exporter of pH Neutralizer.

Alias:

ACID GASES Neutralizer

Application:

RXSOL-24-1461-180 ACID Neutralizer Amine is used as intermediate in the manufacture of surface active agents, textile specialties, antirust compounds, waxes, polishes, herbicides, petroleum demulsifies, cement additives and cutting oils.

It also finds extensive use in the manufacture of Synthetic resins, as a solvent for casein, shellac and dyes, for increasing the penetration of organic liquids into wood and paper in the production of lubricants for textile industry and in making emulsions with mineral and vegetable oils, paraffin and waxes.

Packing Size:

210.00 Ltr.

Related Products:

Odor Neutralizer

Acid Neutralizer

Odor Neutralizer Membrane Original Neutral Scent

RXSOL DISTILLATES D110

Safety Accessories:

Alkali Neutralizer

STP Neutralizer

Decarbonizer Cum Neutralizer

Short Description:

pH Neutralizer Amine is a colorless to pale yellow, hygroscopic viscous liquid with slight ammoniacal odor. We are supplier and exporter of TEA.

RXSOL pH Neutralizer is a clear colorless liquid with a strong ammonia to fish-like odor.Vapors irritate the eyes and mucous membranes. Produces toxic oxides of nitrogen when burned.

Mixes easily with water.

MOLECULAR formula : N(CH2CH3)3

ANTI-LIVERING AGENT(An anti-livering agent is a coating additive used to prevent the increased consistency of a precipitate from forming on a metal surface due to polymerization or other chemical reactions) FOR UREA & MELAMINE BASED ENAMELS; RECOVERY OF GELLED PAINT VEHICLES; CATALYST FOR POLYURETHANE FOAMS; FLUX FOR COPPER SOLDERING.

More application :

Adhesives : Hot melt/Polyesters, Urea/Phenol/formaldehyde, Asphalt/Bituminous, Refractory binders.

Agricultural Chemicals : Neutralize, Algaecide lye peeling assist.

Antistatic Agents : Polyethylene, Polypropylene, Polyamide Polyester, Cotton Fibers, Carpet Backings.

Cement Concrete : Grinding Aid, Fluidity improver strength improver, Mechanical Stability agent, Workability improver, Set Accelerator, Whiteness improver.

Coatings : Water-borne, metal, Glass/film solvent free/Accelerators, Electropheretic.

Coating Remover: Penetrant/Accelerant

Corrosion Inhibitor : In Lub Oils, in Hydraulic Fluids, Coolants with Bactericidal effect, for Aluminium, for Ferrous Metals.

Electroless Plating : Copper

Electroplating : Silver, Tin, Zinc, Cadium, Copper-Nickel, Tin-Nickel, Tin-Cobalt Alloy.

Expoxy: Hardner.

Fuels : High Octane, .Propellent

Inks, Printing : Diazo Dyes, Inks.

Lithography: Developer

Metal Working Cleaning Lubricating : Metal Forming Lubricant, aqueous Lubricant, Cutting Fluid, Cleaners/Degreasers, Etchant.

Mining : Floatation, Dust control

Paint / Pigments : Adhesion improver Thixotropic additive, TiO2 dispersant, Grinding Aid, Pigment dispersant

Petroleum-Coal : Drilling Mud stabilizers, thermal oxidation stabilizers, chemical washes, Tertiary recovery, surfactant, Demulsifier, Oxygen scavenger, Gelling Agent-Fuel.

Polymers : Thermal oxidation stabilizers, Polymerization initiator, Cross-linker, Plasticizer, Chain transfer agent.

Rubber Processing : Vulcanization Accelerator, Stabilizer/ Antioxidant, Activater-filled rubber Dispersant, Chain termination agent.

Soldering Flux : Penetrent.

Textiles : Finishes-Dispersant, Cross linker, Softeners, Lubricant, Bleaching aid, Dye-neutralizers, Fixation catalyst, Extruder cleaner.

Urethanes : Polyol, Chain extender cross linking/curing agent, Catalyst, Modifier, Solubilizer, Degradation waste foam.

Wood Pulping : Swelling Agent.

Use industrial and consumer based:

Triethylamine is an important commercial chemical. It is used as a curing catalyst in foundry molds (foundry is a factory in which metals are cast into different shape by keeping in a container or mold after removing which the metal solidifies and gains that shape), and in particle-board adhesives. It is used for the precipitation and purification of antibiotics. It is used for the production of polycarbonate resins. Triethylamine is found in tobacco smoke, two household use products (floor finish, stump and vine killer) and is approved for use in food and food packaging.

pH Neutralizer Amine supplier and keeping ready stock at Chennai - Ennore, Vizag - Visakhapatnam, Kolkata - Haldia, Mumbai - MIDC, Surat - Kandla, Fujairah - Sharjah - Abu Dhabi, Dubai, Sudan, Muscat Ruwi Barka Oman, Nairobi AFRICA, Sudan, Yemen

RXSOL-24-1461-180 ACID Neutralizer Amine pH Neutralizer Amine ready stock in various size and packing. pH Neutralizer is chemically alkaline amine based products which is also used as surfactant emulsifier and neutralizing acidic value to adjust pH chemical nature. TEA most commonly used in Fragrance Ingredient; pH balancing Adjuster; As a Surfactant - Emulsifying Agent; also as BUFFERING and MASKING agent.

pH Neutralizer Amine Acid Gases

995 reads

Marine Descaler

LIME Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems. RXLYME Marine is formulated to meet the demands of today's water systems.

Alias:

RYDLYME Marine DESCALER, Desacling agent for Marine Diesel Engine Fresh water cooler, Marine Biodegradable Descaler for Titanium and SS TUBES 25 Ltr pack

Application:

This safe and simple solution effectively dissolves rock-like scale deposits that contaminate your water-cooled marine equipment. LIME Marine is used at ambient temperature and then circulated to bring the solution in contact with the accumulated minerals. The reaction results in a slight foaming or bubbling action, indicating the deposits are actually dissolving into solution, and then simply water flush away! These scale deposits, along with zebra mussels and tiger shells, damage your equipment and reduce your water system performance. Historically, these problems have been addressed via harsh acids, mechanical methods, ion exchange, polyphosphates, permanent magnets and electronic conditioning. If your vessel is heat exchanger cooled, keel cooled, or radiator cooled, try LIME Marine and ride the waves with maintenance superiority.

Packing Size:

25.00 Ltr.

Using Procedure:

LIME Marine should be used as directed and at any temperature within the operating limits between 0°F / -18°C and 180°F / 82°C. If the solution does freeze, slush or thicken at the lower operating temperatures, and then thaws, there will be no performance reducing results. Please consult the manufacturer when temperatures above 180°F are encountered.
RXLYME Marine should be applied at ambient temperatures with no heating required. The solution is exothermic, but does not develop a substantial increase in temperature while dissolving water scale, rust, mussels, barnacles, zebra mussels, tiger shells and other water formed deposits.

Note:

Advantage :

The solution does not deteriorate, oxidize, saponify, thicken or lose effectiveness for at least five years.
The solution is of a pleasant or characteristic odor, very similar to cherries, and does not exude any obnoxious or toxic vapors. In rare instances, problematic vapors may occur when encountering high concentrations of sulfur or chlorine. Please contact the manufacturer before proceeding under these circumstances.
The solution does not require neutralizers and it is free rinsing with water.
The solution has the ability to dissolve deposits from some equipment while in operation and without shutdown, if auxiliary coolers are incorporated.
The solution has the properties to be mailed or shipped by any private or commercial carrier without restrictions. Air carriers for emergency deliveries may ship LIME Marine via next day air.
No Need circulate material for more than a four-hour period without consulting the manufacturer. Most LIME Marine cleaning applications can be accomplished within an average of two to four hours.Please use material only as directed.

This allows the solution to be water flushed down normal plant sewers. Check with local ordinances and regulations in your area prior to disposal.

Our company is holding no-1 RXSOL Brand Descaling Boilers Chemical as a Descaling Chemicals Manufacturers, Descaling Chemicals Wholesale Suppliers, Descaling Chemical suppliers, dealers, distributors India and Descaling Chemical exporters for UAE.

We have supply network in Rabale, Navi Mumbai, Mumbai, Surat, Kandla, Gandhidham, Mundra, Sikka, Chennai, Ennore, Vizag, Visakhapatnam, Kakinada, Kolkata, haldia, Paradip, Fujairah, Dubai, Middle East

Related Products:

Sulfamic Acid Descaler Cleaner

Descalex Polymer Heat Exchanger

Rust Scale Remover

AC2 DESCALEX Powder

Safety Accessories:

Safe Acid Descalex

Lime Remover Dissolver

Safe Scale Remover with Indicator

Scale Dissolver 2000RX

Short Description:

LYME MARINE is scale dissolving chemicals. Lyme marine descaler effectively cleans fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems.

LIME Marine has the ability to dissolve approximately 1 Kg of calcium carbonate scale per 3.75 Ltrs in concentrated form. If the LIME Marine is diluted, it will still dissolve 1 Kg of carbonate scale per 3.75 Ltrs, but will require additional circulating time.
The concentrated solution can be held safely in the open hand without deleterious affects. It will however cause a stinging sensation when contact is made on an open wound or cut. If this occurs, simply rinse thoroughly with soap and water.

#MarineBiodegradableDescaler_SoharOMAN
#DescalerFORTitaniumTUBES_dubaiUAE
#ScaleREMOVER_Sharjah
#DescalingCHEMICAL_barkaMUSCAT

LIME Marine is non-corrosive, non-hazardous, and biodegradable. With the reduction of labour and operating costs, downtime, and no installation costs, accompanied with the heavy duty cleaning power, LIME Marine keeps your vessel at sea generating revenue.

LIME Marine manufacturer and supplier in Mumbai, Kandla, Vizag - Visakhapatnam, Surat, Chennai - Ennore, Kolkata - Haldia - Paradip, Fujairah - Dubai, Abu Dhabi - Sharjah, Muscat Barka RUWI, Oman Sohar, Nairobi Kenya Uganda Africa

Desacling agent for Marine Diesel Engine Fresh water cooler

768 reads

TURBOCLEAN HeavyDuty Hydrocarbon

The blend of Non-ionic surfactants, Hydrocarbon solvents, and many powerful heavy-duty ingredients for effectively on-line fired wash cleaning of gas turbine compressors. TURBOCLEAN HeavyDuty Hydrocarboncon is a concentrated powerful cleaner for the compressor section of industrial, Marine aviation gas turbine engines. TURBOCLEAN HeavyDuty Hydrocarbon also specialized in on-line fired wash cleaning of gas turbine compressors.

Alias:

FIREWASH SB, TURBOTECT 2020

Application:

Gas Turbine Compressor Cleaning TURBOCLEAN HeavyDuty Hydrocarbon RXSOL solvent-based cleaners for effective Degreasing, Cleaning of oil deposits and Decarbonising the surface of gas turbine compressors. TURBOCLEAN HeavyDuty Hydrocarbon is SOLVENT based powerful cleaner where as water-based detergents are much less effective.

Packing Size:

220.00 Ltr.

Using Procedure:

By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes.

Mix One Part of TURBOCLEAN HeavyDuty Hydrocarbon with 4 PARTS of DI Water for On-line cleaning.

Note:

Appearance
Clear pale straw coloured liquid with a mild pleasant odour.

Solubility
Completely soluble in water. No agitation required.

Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.

Related Products:

Turbo Cleaner Dry Walnut Shell

Gas Turbine Compressor Cleaning Fluid RXSOL 27

Turbine Kleen 81 RXSOL

Safety Accessories:

Carbon Remover Cleaner HD

Filter Cleaner Engine Oil

Disc Separator Cleaner HD

Short Description:

Specialized Heavy-Duty Hydrocarbon solvent-based chemical for on-line fired wash cleaning of gas turbine compressors

TURBOCLEAN HeavyDuty Hydrocarbon Gas Turbine Compressor Cleaning Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen

Heavy-Duty Hydrocarbon Solvent-based for on-line fired wash cleaning of gas turbine compressors

551 reads

Search

RIGS Oil Field-34