Search

Corrosion Inhibitor-44

Bilge Coat RXSOL

Bilge Coat (Sulphur Acid Neutralizer)

RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution  for  the Bilge Line and well during the carry of cargo as like Sulphur. This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effective in use compare than other alkaline Materials.

Acts as Acid Neutralizer formed during sulphur voyages. 

Alias: 

RBM Bilge Coat 30 kg Pack

Application: 

Dose and Using Procedure

• Use a clean Drum or any plastic tank. Fill the water up to 190 Ltrs and add the RXSOL concentrated Bilge coat 2-4 Ltrs. Stirr well and now it is ready RXSOL BILGE COAT SOLUTION to use.

• Pour 15 to 20 litres of RXSOL BILGE COAT SOLUTION  directly into each hold sounding pipe from on deck.  Replenish each time after the bilge water is pumped out.

Packing Size: 
30.00 Kg.Liq
Using Procedure: 

General recommandation 1 Jug per hold, per week.

Note: 

Benifit :

>Bilge Protection against Acidic Water.
>Enviroment Friendly.
>Low quantity is sufficiant Due to High Concentration and easy ro transport.
>Can be Easly Use and make the solution by Ship Crew on board.
> Due to liquid easy to handle and safe compare than other solid alkaline materials.

Related Products: 
BARRIER HOLD COAT
Slip Barrier Coats HOLD BLOCK
HBI CARGO Hold Wash Concentrate RX 25 Ltrs
Hold Wash Concentrate RX
Diaphragm Pump
Shoulder Pesticide Pumps Sprayer
Plastic Hand Pumps
DEGREASER
TPOL 20 Ltr BUCKET
Hand Cleaner Paste, Waterless 1 Kg Pkg
Slip Barrier Coats HOLD BLOCK
Safety Accessories: 
Gloves Disposable
Goggle Chemical Protective
PVC Chemical Resistance Boot
Article News: 
Bilge Coat (Sulphuric Acid Neutralizer)
Alkaline high foam ship hold cleaning detergent supplier in India and Middle East
ALKAATUFF Heavyduty Alkaline ship hold cleaning detergent and chemicals
Short Description: 
RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur.This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effect

Acid Neutralizer is very effective product to neutralize acidic cargo residue. 

#BilgeCoat_PipavaGUJRAT
#BilgeCoatSupplier
#BilgeCoat_UAEoman
#Bilge_CoatMUSCAT
#BilgeCOAT_MumbaiKolkataVizagChennaiParadip

We are in Marine cleaning chemicals and keeping ready stock of Tank cleaning chemicals for tanker vessel and also ship hold cleaning chemicals for Dry Bulk Carriers available ready stock at all Indian and UAE - Middle East coastal. Please feel free to Contact us, we will answer 24 hours, 7 days a week.

Bilge Coat Acid neutrailzer supplier in Kandla - Deen Dayal UPadhya Port, Sikka, Mundra, Hazira, Mumbai, JNPT Nhava Seva, Goa, Manglore, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Sohar, Ghala, Ruwi, Barka, Muscat, Oman, Ruwi Barka, Sudan, Yemen, Mombasa

Which is the best ship hold marine cleaning chemicals?

No one can answer this question, As cleaning of ship Bulk carrier is fully depends up on there cargo nature. For example if vessel is carrying cement then Cement Cleaner will works as best ship hold cleaning chemicals similarly for lime cleaning, Lime remover is best while for general cleaning ALKAATUFF Ship Hold Cleaner, Aquabreak high foam.

Corrosive cargo like Sulfur, Salt extremely damaging ship hold metal surface as after getting moisture during transit such cargo releas acid which is highly coroding the metal surface and causing pit on surface. Wise man knows about such chemical reaction between metal and such cargo and before loading they are using polymer based thin layer, which is commonly called Slip PolyCoat - Hold Block.

RX MARINE INTERNATIONAL is one of largest cement cleaner, lime cleaner, ALKAATUFF Ship Hold Cleaner, Aquabreak, Slip PolyCoat and many other various type of marine chemicals in India and Middle East. And we are marine chemicals supplier in Mumbai - JNPT - Nhava Seva, Kandla - Deen Dayal Upadhyay, Mundra, Sikka, Navlakhi, Surat Hazira, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata - Haldia - Buz buj, Paradip, Manglore, Goa, Fujairah, Dubai, Abu Dhabi, Sharjah - UAE.

Email : mail@rxmarine.com

Acid Neutralizer

FAQ: 
Sulphur cargo handling tips
How Bilge Coat is useful for protection of Bilge Line and Well
  • 12392 reads

ALKALINE HD coal remover

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.

Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.

Alias: 

Rock Phospate Cleaner, PETCOKE looser, COAL REMOVER RX Hold 220 Ltr

Active Matter: 
54 - 63
Application: 

• Use cold - No Heating required.
• Easily dissolves deposits containing carbon , polymer resin etc.
• Economical to use.
• Scraping not required.
• Non- flammable.
• Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
• Cleans oil side of fuel heaters, oil coolers, etc.
• Can be used for cleaning of : -Fuel Oil Filters - Pistons - Piston rings - Valve cage

Packing Size: 
220.00 Kg.Liq
Using Procedure: 

Directions for Use and Dose Rates

Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.

Cleaning Procedure

Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8–10 square meters.

NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

Note:-
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
• Stubborn deposits should be scrubbed to assist the cleaning operation.

Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Note: 

COAL REMOVER manufacturer and supplier in India / Turkey / Middle East. We havs stock point in Mumbai, JNPT, Surat, Hazira, Mundra, Kandla, sikka, Goa, Manglore, Visakhapatnam, Kamraj Port, Ennore, Chennai, Kolkata, Buz Buz, Paradip, Fujairah, Istanbul, Dubai, Sharjah, Abu Dhabi, Gulf.

We are classified as COAL REMOVER exporter of RXSOL brand.

you may click below to get all location details :::

For Tamilnadu - http://ennoreindiachemicals.com/contact-us

For Andhra Pradesh - http://vizagchemical.com/contact-us

For East Coastal - http://eastindiachemicals.com/contact-us

For Gujrat Port - http://westindiachemical.com/contact-us

For Mumbai Port -  http://marinechemical.in/contact-us

For JNPT - GOA - Manglore port - http://rxchemicals.com/contact-us

For Middle East - Gulf - http://www.dubichem.com/contact

 

Related Products: 
ACQUATuff High Foam
Cement Remover RX Hold
Safety Accessories: 
COAL REMOVER RX Hold
Iron Ore Red Dust Cleaner
Article News: 
SHIP CARGO HOLD CLEANING DETERGENT supplier in India UAE Oman
Short Description: 
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

Ship Hold Coal cleaning chemicals typical video Link.  We are one of largest coal cleaning chemicals - detergent manufacturer and supplier in India and Middle East.

This product is most popular for Ship Hold cleaning detergent for coal cleaning. Shipchandler Shipping Agent can get good discounts directly from our factory by providing there registered accounts number. 

#CoaLremover_Mumbai
#CoaLremover_MundraKANDLA
#CoaLremover_Visakhaptnam
#CoaLremover_FujairahMuscat
#AlkalineCleaner
#ShipHoldCleaner_Alkaline

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 

 

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 

 

Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Coal Remover - Powerful ship hold cleaning detergent manufacturer and supplier in Navlakhi Port, Hazira, Sikka, Jamnagara, Kandla, Mumbai, Manglore, Goa, Chenna Ennore, Visakhapatnam Vizag Gangavaram, Kolkata Haldia, Paradip, Manglore, Fujairah, Abudhani, Ajman, Sharjah, Barka, Muscat Oman, Canada, Kenya Nairobi Mombasa

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 

 

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 

 

Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Ship Cargo Coal cleaning chemicals

FAQ: 
How Coal remover cleaning property can be enhanced
  • 1050 reads

Corrosion Inhibitor for Diesel Cooling Water Treat

Corrosion Inhibitor for Diesel Cooling Water Treatment - RXSOL CIDC is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid, also used as a corrosion inhibitor ( Protects all the metals including cast iron, mild steel, copper .)

Alias: 

E.W.T. Inhibitor 9-131c, Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC

Active Matter: 
45-50
Application: 

The stable oxide film that is formed by RXSOL CIDC prevents corrosion caused by the electrolytic action between dissimilar metals used in the system .RXSOL CIDC has been field tested and found to have no detrimental effects on non-metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL CIDC incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval.

Note: 

In cases where systems are contaminated with oil and/or scale, they should be cleaned before starting to apply RXSOL CIDC.There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL-20-2002-025 and descaling by using RXSOL 1008.

Related Products: 
ROCCOR NB RXSOL Colour Indicator
RXSOL 2000 Corrosion Inhibitor
Sodium Molybdate
Engine Guard NB Scale Inhibitor DEWT
Heavy Duty Cleaner
Short Description: 
Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib
Information: 

 Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC specialized product for Marine and shipping industrial use. Major supplier in all INDIAN and UAE Middle East coastal.  RXSOL CIDC Prolong the life of equipment by keeping scale and corrosion free.

RXSOL CIDC Water-soluble corrosion inhibitors FOR MTU engine.

Advatages : -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL CIDC is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product accidentally overdoses, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.

2. Improves generating cooling efficiency by maintaining a clean heat transfer

3. Corrosion protection by using a superior corrosion inhibitor.

4. Reduced maintenance and downtime

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Marine Diesel Engine specialized corrosion inhibitor.

NOTE : Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine, life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2-month interval.

Marine Chemicals

Boiler water treatment chemicals

Fuel oil treatment chemicals

Tank cleaning chemicals

Test kits and reagents

Cooling water treatment chemicals

Oil spill dispersant

Electric cleaning chemicals

Air cooler cleaning chemical

Antiscalants

Defoamers /Surfactants

Oxygen Scavengers

Custom Blending of Water Treatment Chemicals

Water Treatment Chemicals - Raw 

Coagulants

Flocculants

Disinfectants

Corrosion Inhibitors

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40% 

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC). 

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate. 

Boiler Water Treatment Chemicals

Precleaning & Passivation

Scale Inhibitors

Corrosion Inhibitors

pH Booster (Inorganics & Organics)

Descaling Chemicals (online / offline)

Sludge Conditioner

Condensate Treatment Chemicals

Amine Based treatment Scale Inhibitors

 

Corrosion Inhibitors

Biocides

Biodispersant

Dealkalisers

Descalants

Cooling Water Treatment Chemicals

Chiller Water

Treatment Chemicals

Pre cleaning Chemicals

Anticorrosion Treatment

Antimicrobial Treatment

STP Treatment Chemicals

Biocultures

Deodorants

Biomass Setting Agents

Disinfectants

Defoamers

Nutrients

Enzymes

ETP Treatment Chemicals

Coagulant

Flocculant

Decolorant

Dewatering Aids /

Filter Aids

Bioculture – Anaerobic & Aerobic

Deodorants

De-Emulsifiers

Polymers for Filter Press /

dewatering Evaporator Antiscalants

Water Treatment Chemicals

Biocides

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Dust control products

Membrane treatments

Metal passivators

Monitoring and control systems

Odor inhibitors

Oxygen scavengers

Scale inhibitors

Sludge dewatering polymers

MUNICIPAL water treatment chemicals

Coagulants/flocculants

Defoamers

Feed / make down equipment

Membrane treatments

Mixing equipment

Odor inhibitors

Scale inhibitors

Sludge dewatering polymers

MINING & MINERAL PROCESSING

Coagulants/flocculants

Dust control products

Filtration aids

Grinding aids

Monitoring and control systems

Non-sulfide flotation reagents

Rheology modifiers

Scale inhibitors

Specialty dewatering aids

Viscosity modifiers

CHEMICAL PROCESSING

Biocides

Cleaners

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Membrane treatments

Monitoring and control systems

Odor neutralizer

Oxygen scavengers

RO Membrane Treatment Chemicals

RO Pre -Treatment Chemicals

Membrane Antiscalants

Raw water RO (Food grade)

Effluent Recycle RO

Desalination Plants

Membrane Antioxidants

Membrane Cleaning Chemicals

Membrane Preservatives

Online / Offline Biocides

pH Boosters (Food Grade)

Taste Enhancers for RO Product water

Sanitizing Products for PSF, ACF Filter

Media and Pipelines.

Sugar Process Chemicals

Boiler Treatment Chemicals

Juice Clarification Aids

Syrup Clarification Aids

Mill Sanitation Chemicals

Viscosity Reducer

Anti Foamer / Defoamer

Evaporator Antiscalant & Descalants

Sugar Refining Compounds

Color Precipitants

Paper Process Treatment Chemicals

Anti Slimicides

Defoamers

Chemicals For Krofta Applications

Boil –out Chemicals

Vacuum Pump Antiscalant

ETP Chemicals

Water-soluble corrosion inhibitors FOR engine water treatment

  • 16545 reads

Concrete Pipeline Powder

RXSOL CPLP Concrete Pipeline Lubricant Powder is concrete delivery truck mortar releasing solution.

 

RXSOL CPLP Lubricant helps concrete transport company  to save time to release mortar from vechicle and also helps to keep vehicle  mortar deposition free.

Alias: 

Lubricant for Concrete Pipeline, RXSOL CPLP

Active Matter: 
98-99
Application: 

Concrete pump line inwall is smeared irregularly when pumping, influence result of use, causes pump line to stop up easily, does not reach the effect that mortar moistens pipe,  RXSOL CPLP Concrete Pipeline Lubricant Powder helps as a lubricant to release mortar freely.

Packing Size: 
200.00 Grams
Using Procedure: 

Take Full container / Pouch of RXSOL CPLP Concrete Pipeline Lubricant Powder   in 50 - 75 Ltr of water, Mix Properly to Get Homogenious Light viscous solution. Then use the RXSOL CPLP water mixed slurry solution in PUMP PIPELINE  prior to concreting. its aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Note: 

RXSOL CPLP Concrete Pipeline Lubricant Powder  enhance concrete flow without block in pipe line. Which is resultig not only TIME SAVER but also protect CIRCULATING SYSTEM and PIPE Line heavy maintenance free.

RXSOL CPLP Concrete Pipeline Lubricant Powder's aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Related Products: 
Cement Cleaner
Cement Remover Gel
CEMENT Additive for Strength
Safety Accessories: 
Super Plasticizer (Admixture)
Retarder Cement Admixture
Concrete Accelerator Fast Setting
Short Description: 
Concrete lubricant for application of used in pipeline of concrete pump

This lubricant profit that is used for pipeline of concrete pump is managed 50 meters, 

Concrete Pipeline Powder manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Concrete Pipeline Powder at a competitive price from us. We have ready stock of Concrete Pipeline Powder in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Lubricant for Concrete Pipeline

  • 808 reads

Air Cooler Cleaning Chemical

Alias: 

Mite ACC, RXSOL 79101 ACC, Care Clean ACC, Air Cooler Cleaner Merichem, Cleaner 622, EAZY ACC, SEA SHIELD ACC 79101, Air System Cleaner, Air cooler Cleaner AC cleaner 25 Ltr

Application: 

During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dust and carbonaceous deposit, which will affect cooler efficiency and damage the system.

RXSOL-54-1048-020 ( www.rxmarine.com/safe-acid-descalex-liquid-20-ltr ) is a powerful dissolving agent of calcium carbonate. Therefore, it is better to use RXSOL-54-1048-020  to do circulating cleaning at an early stage before the scales build up and block the tube, or regular cleaning is recommended as well. It is impossible to do a circulating cleaning when the tube is completely blocked.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Dirt attached on air-side fins of air coolers are a mix of carbonaceous particles such as soot and oil mist of unburned fuel components. 
Carbonaceous particles can be removed by Alkaline Cleaners Part No. RXSOL-16-1040-025 ( www.rxmarine.com/alkaline-air-cooler-cleaner ) and oil mist can be removed by oil based cleaners. However, it is very difficult to remove the mix of these substances. If you use an alkaline cleaner, oil will repel the water based alkaline cleaner; if you use oil based cleaner, carbonaceous particles will get in the way and stop oil from being removed.

This cleaners designed to remove both carbonaceous and oil simultaneously. An effective cleaning method is to immerse one side to remove the loose stains first, and then immerse the other side. This method can efficiently remove dirt and prevent swollen dirt peeled from fins from blocking the spaces between fins.

Dirt in tubes of seawater side

White scales attached on the seawater side of air coolers of many vessels. We found that in most cases, the main component of the scales is calcium carbonate and there is also a small amount of calcium sulfate. Therefore in most cases, if you dissolve the calcium carbonate the scales will be removed.

However, if the amount of scales is large enough to block the tube, the cylindrical scale will usually have calcium carbonate on the outside (the side that is in contact with tube) and calcium sulfate in the center (part that seawater passes through). Calcium sulfate is easier to be formed when the temperature goes higher.

When the amount of scales increases, the contact area of scale and cleaner is very small and a longer time of dissolution is required. Calcium sulfate cannot be dissolved by an acid cleaner.

Note: 

FREE from ACID
Polymer based cleaner, which will result extra shinning and smooth feeling on surface.

Multiple action of RXSOL-16-0009-025 increases its popularity, And this product also can be use for DEGREASING and Carbon removal action.

Very popular and Effective cleaner for air coolers, scavenging air systems and turbo chargers of diesel engines, Coils of AHU, FCU, Air Conditioners (Indoor and Outdoor), Car Condenser and Radiator, Air Cooled Chillers, Air Cooled Condensers, Air Cooler Tube Bundle etc. 

Related Products: 
Air Cooler Alkaline Cleaner
Air Cooler Cleaning Chemical LT
Air Cooler Chemicals Plus
C SHINE Alkaline Coil Cleaner
Degreaser Heavy Duty
Electrosol Quick Dry
Carbon Remover
Disc Separator Cleaner
RXSOL 27 Gas Turbine Compressor Cleaning Fluid
SEA POWER CLEANER
Coil Cleaner Air Conditioning System
Electrosol E
BioSol Cleaner
Condenser Coil Cleaner
Air Cooler Scale Dissolver
Air Cooler Chemical ACC-009
Traffic Film Remover
RXSOL ORG - 16 (Condenser Water Scale & Corrosion Inhibitor)
Aluminium Brightener Conc. ABC
Coil Cleaner
Dual ka Cleaner, Machine Parts Cleaner
Aluminium Cleaner
RXSOL ORG - 3 210 Ltr
Evaporator Coil Cleaner
Degreaser for HEAVY SOIL
Oil Grease Emulsifier
Degreaser Dual strength Surfactant
Coil Brite RXSOL Yellow
Coil Brite RX PINK
Organic Acid Degreaser
STICK N SOL - Removing Label
Paint Remover 5 Ltr
Safety Accessories: 
Gloves Disposable
Goggle Chemical Protective
AC2 DESCALEX Powder
Video Links: 
Air Cooler Cleaning Procedure
AIR COOLER CLEANING CHEMICAL
Article News: 
Air Cooler Cleaning Chemical
Waterless Hand cleaner price for Mumbai, JNPT
Air cooler Chemical supplier in Masjid Bunder, Mumbai
Carbon Cleaner supplier
Air cooler cleaning chemical MSDS
Turbocharger cleaning chemicals
Short Description: 
ACC9 AC coil cleaner is powerful solvent emulsion cleaner, easily dissolves soiled oil and grease deposit. Also helpful to clean all types of engine parts, turbo chargers of diesel engines. During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dus
Information: 

ACC9 is very effective to clean and dissolve oil, grease and carbon residues from machinery parts of air coolers, turbochargers and scavenging systems. We are keeping ready stock of materials at Mumbai, Surat, Gandhidham - Kandla Deendayal , Mundra, Manglore, Visakhapatnam, Chennai - Ennore, Kolkata - Haldia, Fujairah, Dubai - Sharjah. Proper cleaning of AIR COOLER  not only cooling efficiency can be improved but also Fire hazards can be minimised as build up of grease and oil residues are helpful to transmit fire from one point to others. Our continious work in chemicals field help us to add strong emulsifying agents in our Air cooler cleaning chemical which acts as penetrating agent as well as cleaner to  remove grease and mud part created with mixture of mineral oils, grease, carbon soot  from air coolers and turbocharger.

#AirCoolerCleaningChemicals
#AirCoolerDetergent
#AirCoolerCleaner_manufacturerSupplier

Air Cooler Cleaning Chemical manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Barka, Ghala, Muscat Oman, Kenya Africa. Get the best quality of Air Cooler Cleaning Chemical at a competitive price from us. We have ready stock of Air Cooler Cleaning Chemical in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

How to Clean Air Cooler?

Air Cooler Detergent Cleaner Formulated to clean remove heavy deposited oil, grease, and carbon and mud deposits from air coolers and scavenging systems. 3 Ltr of Concentrated Cleaner can cover heavily deposited contaminated cooler surface area. 

DOSE Air Cooler Cleaning  Chmeical Mixing Ration with Water : 1 Part Concentrate COOLER CLEANER with 3 PARTS FRESH WATER. 

Note : If condition of COOLER is heavily deposited / contaminated then repeat the injection process 2-3 times.

After cleaning of EMULSIFIED deposits, Rinse the system with FRESH WATER.
 

SPRAY METHOD by HAND SPRAY :
 

 

First of all STOP AC ENGINE, and Disconnect from POWER SUPPLY.

Then spray on all coil CONCENTRATE Air Cooler Cleaner, And after 1 Hours use PRESSURE Water Jet as per the requirement ti remove all greasy mess and loose particle. And flush the system through DRAIN VALVE. If necessory, repeat the same PROCESS to get satisfaction and optimum cleaning result.

 

Typical Soak Method

USE PLASTIC BATH TUB and dip all machine parts to remove HEAVY DEPOSITED carbon and oil grease. Wait for minimum 2 - 4 hrs then RINSE the parts by using PRESSURE WATER JET.

 

Note : Must read instruction of ENGINE MANUFACTURE manual.

Powerful AC coil cleaner

FAQ: 
Best cleaner for Air cooler and Turbocharger
Fire Hazard prevention
Diesel Engine Cleaner
Dose Direction of ACC9
Cleaning Procedure of Air cooler

Glycerine

Glycerol is a simple polyol compound. It is a colorless, odorless, viscous liquid that is widely used in pharmaceutical formulations. Glycerol has three hydroxyl groups that are responsible for its solubility in water and its hygroscopic nature.

Alias: 

Glycerin, Glysanin, Glyceritol, Osmoglyn, Propanetriol, Glycerol, Glyrol, Glycyl alcohol, 1,2,3-Propanetriol, Trihydroxypropane

Application: 

Pure Vegetable Glycerine is an outstanding moisturizer and skin cleanser that also provides softening and lubricating benefits. It's hypoallergenic and easily soluble in water, making it suitable for use in all of your favorite cosmetic applications. Pure Vegetable Glycerine has a long shelf life and does not easily oxidize. It is a natural product derived from 

Packing Size: 
30.00 Kg.Liq
Using Procedure: 

Clear colourless, odorless, syrupy liquid. Combustible and has low toxicity. Extracted from pickel steel, or waste sulfuric acid oxide of titanium. Mainly used for corrosion control of the seawater side of a condenser or for water and sewage treatment.

Glycerol was historically used as an anti-freeze for automotive applications before being replaced by ethylene glycol, which has a lower freezing point. While the minimum freezing point of a glycerol-water mixture is higher than an ethylene glycol-water mixture, glycerol is not toxic and is being re-examined for use in automotive applications

Related Products: 
Castor Oil FSG
Petroleum Jelly
Acid Slurry LABSA 96 to 98 250 Kg
Sodium Lauryl Ether Sulfate 70 %
Castor Oil Industrial
Article News: 
Industrial Cleaning Solvents Manufacturer Supplier,Exporter
Solvent chemical manufacturer and supplier
Sodium Molybdate exporter and supplier
Chemicals supplier in CIDCO Industrial Area Turbhe Navi Mumbai
Glycerine Uses and Application
Short Description: 
Glycerol is a simple polyol compound. It is a colorless, odorless, viscous liquid

Glycerine manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Glycerine at a competitive price from us. We have ready stock of Glycerine in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

  • 15820 reads

Rust Convertor

RXSOL-28-1050-005 is Exciting product treated for prevention of rusting by chemical coating. This product is Single component rust neutralizing system giving excellent adhesion to subsequent painting materials. on applying to metal surface it penetrates through and chemically reacts with the rust on the surfaces  and forms a fine coherent film of protective  coating on the surface which also serves as an excellent base for the primer.

Alias: 

OSPHO, ORTHOPHOSPHORIC SOLUTION Mixture

Application: 

When a piece of iron is left exposed to ordinary moist air, it is found covered with reddish brown coating which can easily be detached,  The process of formation of dust is called rusting. RXSOL-28-1011-005 is Exciting product treated for prevention of rusting by chemical coating.
 

Rust Converter manufacturers, suppliers & exporters in India and Middle East. We have various location of stock point for supplying of Rust Converter. Rust converter coating that is applied to rusted metal to stop rust, protect the metal surface.

Packing Size: 
5.00 Ltr.
Using Procedure: 

APPLICATION, DOSAGE & CONTROL:-

It is necessary chemically cleaned to remove old rust & scale deposits before treatment.

DIP CLEANING: -
Small parts may be dipped in an open bucket or tank-containing RXSOL-28-1011-005 after dipping immediately removes the metals parts from bath. Finally wash the system with water on complete drying. Acid proof gloves should be worn during the operation.

Note: 

WIPPING OR BRUSHING: -
Large components may be wiped down Rags, Sponges, or Brushes soaked in RXSOL-28-1011-005 .Synthetic sponges & brushes should be checked for compatibility with RXSOL-28-1011-005 prior to use. And finally wash the system with water after 2-3 hours on black coating , incase where RXSOL-RC-1011/B dries leaving a coat of white sludge formation wipe out with a cloth and repeat the application then allow to dry. Again wash the system with water. The surface is now ready for primer.

 

  •  Not expected to burn
  •  Sandblasting not require
  •  Excellent bonding
  •  Extends durability and life of the paints
  •  Easy to apply & simple to control.
  •  Dries completely.
  •  100% active.
  •  Formulated to be very cost effective.
  •  Maintains a protective insoluble tenacious film of iron phosphate.
  •  Can be used neat or diluted with fresh water.

 

Where useful metals react with environments and are lost usually as oxides. Materials worth billions of rupees are wasted due to corrosion of material every year. It is therefore essential for every one to understand the undergoing principles in order to check corrosion

Short Description: 
Polymer bleanded OrthoPhosphoric Solution Proprietory Mixture based Single component rust neutralizing system giving excellent adhesion to subsequent painting materials. RXSOL-18-1011-025 is Exciting product treated for prevention of rusting by chemical coating.

When a piece of iron is left exposed to ordinary moist air, it is found covered with reddish brown coating which can easily be detached,  The process of formation of dust is called rusting. RXSOL-28-1011-005 is Exciting product treated for prevention of rusting by chemical coating.
 

Rust Converter manufacturers, suppliers & exporters in India and Middle East. We have various location of stock point for supplying of Rust Converter. Rust converter coating that is applied to rusted metal to stop rust, protect the metal surface.

Rust convertor RXSOL-28-1011-005 manufacturer in India Oman and Middle east / Gulf. We have strong distribution network in UAE, INDIA, MUSCAT. Most popular Rust convertor RXSOL-28-1011-005 supplier in Mumbai, Navi Mumbai, Thane, Surat, Gandhidham, Manglore, Goa, Vizag Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Ruwi Barka, Muscat Oman, Sudan, Yemen, Nairobi Kenya.

OrthoPhosphoric Solution Proprietory Mixture

  • 95 reads

Corrosion Inhibitor

RXSOL-16-1047-210 corrosion Inhibitor is an organic, liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.
 

Alias: 

NALCO EC1304A, Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid. Acid Corrosion Inhibitor

Application: 

The addition of Acid corrosion Inhibitor RXSOL-16-1047-210,  inhibitors to  Acid solution provides maximum protection for equipment during:

  • a. The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equipment.
  • b. The removal of scale and deposits from equipment in refineries, utility companies,paper mills, chemical plants and other industries.

Acid corrosion Inhibitor RXSOL-16-1047-210 inhibitors meet the requirements of Military Specification Nos.MIL-I-17433 and MIL-C-17434.

Packing Size: 
210.00 Ltr.
Using Procedure: 

For each 1000 gallons of either 3% or 5 % by weight* hydrochloric acid solution, not less than the following amount of Acid corrosion Inhibitor RXSOL-16-1047-025 should be used:

1 gallon for a cleaning temperature of 150° Fahrenheit.
2 gallons for a cleaning temperature of 175° Fahrenheit.
3 gallons for a cleaning temperature of 200° Fahrenheit.

* A 5% by weight hydrochloric acid solution contains 14.1% by volume of 20° hydrochloric acid.

The exceptional strength and heat stability of Acid corrosion Inhibitor RXSOL-16-1047-210 give the user a considerable safety factor in relation to temperature, acid strength, and time. Acid corrosion Inhibitor RXSOL-16-1047-210 may be added to either the diluted or concentrated hydrochloric acid. In either case, Acid corrosion Inhibitor RXSOL-16-1047-210 should be thoroughly mixed with the acid by stirring or agitation.

The hydrochloric acid solution inhibited with Acid corrosion Inhibitor RXSOL-16-1047-210 is best circulated through the equipment to be cleaned. When circulation cannot be accomplished, the equipment should be filled with the inhibited acid and allowed to react for sufficient time to remove the objectionable deposits. To estimate the proper acid concentration and cleaning time, samples of the deposits to be removed can be tested in the laboratory prior to cleaning. If heating of the equipment to be cleaned or acid solution is desired to speed the cleaning action, it should be done prior to the start of the cleaning operation.

Note: 

Storage and Disposal

Acid corrosion Inhibitor RXSOL-16-1047-210 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL-16-1047-210 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL-16-1047-210  be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

Disposal information for Acid corrosion Inhibitor RXSOL-16-1047-210 is given on the Material Safety Data Sheet for each product.The industrial cleaning bath is acidic and contains hydrochloric acid and organic Acid corrosion Inhibitor RXSOL-16-1047-210  components. Waste treatment , neutralization is required. The industrial cleaning bath and sludge can contain ingredients other than those in the chemical as supplied and analysis of the solution and/or sludge is required before waste treatment and disposal.

Related Products: 
Corroision Inhibitor for closed & Open cooling system
ROCCOR NB Corrosion Scale Inhibitor Liquid
Diesel Engine LiquiGuard NB
Acid corrosion Inhibitor RXSOL 213
Hand Cleaner Paste, Waterless 1 Kg Pkg
RXSOL Altreat 400
Moya Oil Concentrate
Nitrite Borax Corrosion Inhibitor Powder
Corrosion Inhibitor Nitrite Borax based
Corrosion Inhibitor Intensifier Hytemp O
Safety Accessories: 
Hand Gloves Chemical resistance
Goggle Chemical Protective
Article News: 
Industrial Chemicals manufacturer and supplier
HEDP-Hydroxyethylidene Diphosphonic Acid Suppliers in India
Premium Quality Water Treatment Chemicals Manufacturers
Short Description: 
Corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.

Corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.

NALCO EC1304A, Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid. Acid Corrosion Inhibitor

Corrosion Inhibitor manufacturer and supplier in Mumbai, Gandhidham, Vizag - Visakhapatnam, Chennai, Kolkata, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat - Oman.

38249022

Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid

FAQ: 
Why Use RXSOL Corrosion Inhibitor ?
  • 10381 reads

Sodium Sulphite

Our group division company is a leading manufacturer of Sodium Sulphite, Sodium MetaBiSulphite and SodiumBiSulphite. We have ready stock available at our godown at Mumbai, Kolkata, Chennai, Gandhidham, Visakhapatnam, FUJAIRAH, Dubai, Sharjah, Muscat Oman, Nairobi Kenya, Canada

Alias: 

CAS NO: 7757-83-7, Na2SO3, Sodium Sulphite sulfite Anhydrous, Sodium Sulfite

Active Matter: 
98.5
Application: 

Sodium sulfite is primarily used in the pulp and paper industry.

It is used in water treatment as an oxygen scavenger agent, to treat water being fed to steam boilers to avoid corrosion problems.

In the photographic industry to protect developer solutions from oxidation and (as hypo clear solution) to wash fixer (sodium thiosulfate) from film and photo-paper emulsions.

Packing Size: 
50.00 Kg.PWD
Using Procedure: 

In textile industry as a bleaching, desulfurizing and dechlorinating agent and in the leather trade for the sulfitization of tanning extracts. 

It is used in chemical manufacturing as a sulfonation and sulfomethylation agent. 

It is used in the production of sodium thiosulfate. It is used in other applications, including froth flotation of ores, oil recovery, food preservatives, and making dyes.

Note: 

The storekeepers ensure that the chemicals are stored in sealed packaging so that these remain free from contamination & moisture during the transit.

Related Products: 
Sodium Hydrosulphite Liquid
Sodium Thiosulfate Pentahydrate
Sodium Chloride TAB
Calcium Hypo Chlorite
SODIUM THIOSULPHATE CRYSTAL
Safety Accessories: 
Sodium Dichlorocynurate Granules
Calcium Hypochlorite Granules
Short Description: 
Sodium sulphite is used as Reducing agent, Antibrowning agent, antioxidant, Flour treatment agent also as preservative in biscuit industries. In textile as a bleaching,In leather for tanning extracts, also in photographic industry etc

Also we are keeping ready stock of these products :

SODIUM SULPHATE 99% WHITE POWDER CRYSTAL 50 KG BAG
PHOSPHORIC ACID 85% WHITE LIQUID POWDER
Caustic Soda Lye
HYDROGEN PEROXIDE 50% LIQUID 35 KG CARBOY PACK
CITRIC ACID 99% POWDER
caustic soda flakes
BLEACHING POWDER
SODIUM NITRATE
ACETIC ACID

EDTA Disodium 

Calcium chloride - Powder & Prills

Ammonium sulphate - White & Light Yellow

Sodium Sulphate 

Boric Acid 

Copper sulphate 

Sodium Thiosulphate 

Potassium chloride powder 

Sodium Sulphite - 90% & 96%

Synonym: Sulfurous Acid, Disodium Salt 

Chemical Name: Sulfurous acid, Disodium salt 

Chemical Formula: Na2So3

#SodiumSulphite_UnitedArabEmiratesDubai
#SodiumSulphite_MuscatOman
#SodiumSulphite_MumbaiVizagKolkataChennaiGandhidham

Our range includes Sodium Thiosulphate, Sodium Acetate, Sodium Metabisulphite, Sodium Bisulphite, Sodium Sulphite Anhydrous, Ammonium Sulphate, Ammonium Chloride, Magnesium Sulphate, Sodium Phosphate (Mono / Di / Tri) etc.

Sodium Metabisulfite supplier and exporter.  Sodium Metabisulphite also called sodium pyro sulphite. Food grade of Sodium sulphite is used as preservative agent, reducing agent, Antibrowning agent, antioxidant, flour treatment agent also as preservative in biscuit industries.

We are keeping ready stock of Sodium Metabisulfite in 25 Kg and 50 Kg pack. And we are one of popular sodium metabisulphite supplier in Mumbai, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam, Kolkata, Fujairah, Dubai,  Sharjah, Abu Dhabi, Sodium Sulphite supplier in Barka Ruwi Muscat Oman

Sodium Metabisulfite is White crystals or crystalline powder having an odour of sulfur dioxide
 

HOW to TEST purity of Sodium Sulfite?

PURITY TESTS
Reagents: Hydrochloric acid, hydrazinium sulfate, standard selenium solution (100µg Se/ml)

Procedure

Weigh 2.0 ± 0.1 g of sample and transfer to a 50-ml beaker. Add 10 ml water, 5 ml hydrochloric acid and boil to remove SO2.
Into a second beaker, weigh 1.0 ± 0.1 g of sample, add 0.05 ml standard selenium solution and proceed as above.
To each beaker add 2 g hydrazinium sulfate and warm to dissolve. Let stand for 5 min. Dilute the contents of each beaker to 50 ml in a Nessler tube and compare the colour of the two solutions. The sample should be less pink than the sample with the added standard.

METHOD OF ASSAY

Weigh 0.2 g of the sample to the nearest mg, add to 50.0 ml of 0.1 N iodine in a glass-stoppered flask, and stopper the flask. Allow to stand for 5 min, add 1 ml of hydrochloric acid, and titrate the excess iodine with 0.1 N sodium thiosulfate, adding starch TS as the indicator. Each ml of 0.1 N iodine is equivalent to 4.753 mg of Na2S2O5.

Sodium sulfite Na2SO3

  • 2648 reads

Volatile Corrosion Inhibitor Powder VCI

Packing Size: 
25.00 Kg.PWD
Short Description: 
a chemical compound that protects metals from corrosion
  • 34 reads
stock-clearance.png