Search

Corrosion Inhibitor-44

Volatile Corrosion Inhibitor

Packing Size: 
210.00 Ltr.
Short Description: 
a chemical compound that protects metals from corrosion
  • 64 reads

Antiscalant Antifoulant Corrosion Inhibitor 704

Alias: 

Genesys RC - Antiscalent, Antiscalant IBC Hypersperse MDC704, KylinTreat M704 Reverse Osmosis Antiscalant Phosphorous free

Active Matter: 
81-85
Application: 

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.

Packing Size: 
25.00 Kg.Liq
Using Procedure: 

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature  Maximum Dilution %
<30°C 10
30 – 35°C 25
>35°C 50

Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Note: 

Future & Benefit

  • Excellent results as a replacement for softenerfilters
  • Compatible with SoliSep* MPT150 coagulant
  • Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
  • Compatible with all of the leading RO membranes
  •  Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
  • Effective over a wide pH range
  • May be fed neat or diluted
  • Compatible with feedwaters that contain aluminum and iron oxides

Handling : 
 
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Related Products: 
Evaporator Treatment Chemical
ENGINE SCALE Guard NB
Membrane Antiscalant ALKA 191T
Corrosion Inhibitor 8050
Corrosion Inhibitor Multifunctional Closed Chilled Systems
Safety Accessories: 
Gloves Disposable
Goggle Chemical Protective
Article News: 
Types of Corrosion Inhibitor
What is Corrosion Inhibitor?
Antiscalant Supplier
RX Marine Contact Details
Water treatment chemicals
Short Description: 
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Reverse Osmosis Antiscalant, Phosphorous free

 

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is a highly effective antiscalant developed to control scale precipitates of Silica, Calcium Carbonate, Calcium Sulfate, Barium Sulfate and Strontium Sulfate, and reduce particulate fouling in the membrane separation systems of reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF).

 

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is phosphorous free. It is formulated by high performance multipolymers.

Highly effective over a wide-range of waters – for calcium-based and sulfate-based scales, notably, barium sulfate.

RO ANTISCALANT

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Effectively control  CaCO3 up to LSI +3.0, CaSO4, SrSO4, BaSO4, CaF2, SiO2, Fe2O3, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 RXSOL  is compatible with all of the leading reverse osmosis membranes, such as Dow, Filmtec, GE, Hydranautics, TORAY, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

Antiscalant Antifoulant Corrosion Inhibitor 704  helps to extend the membrane life and reduce the running cost.

Antiscalant Antifoulant

Sodium Lauryl Ether Sulfate 70 %

Sodium Lauryl Ether Sulphate  RXSOL-12-1880-235  is an anionic surfactant. It is water-soluble. It has excellent foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants. However, due to its anionic character, it should not be used with cationic components like cationic surfactants, cationic dyes, etc.

Alias: 

SLES 70, Sodium Lauryl Ether Sulphate Paste, Texapon N70

Active Matter: 
70-72
Application: 

Sodium Lauryl Ether Sulphate  RXSOL-19-1880-050 is used for a wide range of applications such as:

  • In shampoos, foam baths and shower gels as a basic surfactant and foaming agent.
  • In liquid detergents and dish washing formulations for detergency and foaming.
  • In bathing bars, body wash, liquid soap, etc.
Packing Size: 
220.00 Kg.Liq
Using Procedure: 

 

Chemical Name : Sodium Lauryl Ether Sulfate
INCI Name : Sodium Laureth Sulfate
CAS Number : 68891-38-3
EC Number : 500-234-8
Chemical Formula : R-OCH2CH2OCH2CH2OSO3Na

(R = C 12-14 natural)

Note: 

PACKING :

Sodium Lauryl Ether Sulphate  RXSOL-19-1880-050 is available in 220 kg /160 kg HMHDPE carboys. Total of 80 / 118 carboys i.e. 17.6 MT /17.7 MT can be shipped either palletized or non-palletized in 20 ft. full container load. It can also be shipped in IBC of 1 MT capacity and ISO containers with capacity of 22 to24 MT.

HANDLING AND STORAGE

Store in a clean, dry area, away from sunlight and heat. The recommended storage temperature is 20°C – 35 °C. Keep carboys tightly closed. In the original sealed carboys and kept at recommended storage conditions, the product can be stored for at least 1 year. Spills should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, seek adequate and timely medical attention. Stacking should be maximum 1+1 carboys.

Related Products: 
Glycerine
Sodium Dodecyl Sulfate Powder
Sodium Dodecyl Sulphate
Acid Slurry LABSA 96 to 98 250 Kg
Safety Accessories: 
Carboxy Methyl Cellulose CMC
SODA ASH 25 Kg
Short Description: 
Excellent Foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants

SLES, Sodium Lauryl ether Sulfate, Sodium lauryl ether sulfate suppliers in Mumbai, Kandla, Gandhidham, Kolkata, Howrah, Vizag, Chennai, Tuticorin. RXSOL brand Sodium lauryl ether sulfate or RXSOL brand SLES is one of the most supplied chemicals by us. We are one of the largest Sodium lauryl ether sulfate suppliers and exporters in Mumbai, Kandla, Gandhidham, Guajarat, Kolkata, Vizag, Chennai etc. sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india
sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl sulphate manufacturer gujarat
sodium lauryl ether sulphate manufacturing process
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium dodecyl sulfate
ammonium lauryl sulfate
sodium lauryl sulfoacetate

sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india

SLES Sodium Lauryl Ether Sulphate exporter and supplier in South Africa, UAE Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Muscat Barka Sohar, Oman, Mumbai, Kandla Gandhidham, Visakhaptnam, Chennai, Kolkata, Canada, Nairobi Kenya, Sudan Yemen

SLES sodium Lauryl Ether Sulphate developed in chemicals field to cover demand of personal care and home care products like Shampoo, Bubble Bath, Shower Gel, Face Wash, Dish Wash, Liquid Detergent and Hand Wash. SLES not only used in detergent and cosmetic industry but also popular in the printing and dyeing industry, petroleum and leather industry as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent.

SLES Paste 70 Percent

Descaling Liquid

Alias: 

LIME-OUT, DESCALER MTA, DESCALE IT, DESCALER, DESCALER LIQUID 555, Phosphoric Descaler, Descaling Liq 50 Ltr

Active Matter: 
63-72
Application: 
Low Foaming Solution. Safely removes scale from cooling towers, pipes, Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form without system shutdown
 
It Effectively Removes Scale, Heavy Slime and Algae from surface. RXSOL 555 is an inhibited phosphoric acid descaler which is much safer and non-fuming. Also  safe on paint.
Packing Size: 
20.00 Ltr.
Using Procedure: 

RXSOL-11-1008-020  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 5-40% of RXSOL-11-1008-020 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  RXSOL-10-1005. RXSOL-11-1008-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-11-1008-020 ,  

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  RXSO-20-2005  in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

RXSOL-11-1008-020 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008-020 Boilers, See Rx cleansers Practical Application Manual

Note: 

 After using  RXSOL-11-1008-020, sense all metal surfaces with 0.5 percent of  RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc

 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL 1008 .
    RXSOL 1008  is safer for the employees to use than other acid products.
  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
  •  Cleans down to the original surface without pitting.
  •  RXSOL 1008 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL 1008  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.

India's largest scale claner manufacturer with multi location stock point. DESCALING Chemical manufacturer and supplier  in Kolkata, Mumbai, Surat, Gandhidham, Vizag, Chennai, Dubai, Fujairah...

Related Products: 
Safe Acid Descale Powder
Descalex Polymer Heat Exchanger
Descaling Chemical Compound for Chiller, Condenser tube of Central AC Plant
Heat Exchanger Cleaner
Descalex Powder
Safety Accessories: 
Hand Gloves Chemical resistance
Goggle Chemical Protective
Article News: 
Descaling chemicals supplier in Elamkulam, Cochin - India
Short Description: 
Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits
Information: 

 Scale remover chemical manufacturer, Exporter and supplier. 

Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits

LIME-OUT, DESCALER MTA, DESCALE IT, DESCALER, DESCALER LIQUID 555, Phosphoric Descaler, Descaling Liq 50 Ltr

Descaling Liquid manufacturer and supplier in Navi Mumbai MIDC, Mumbai, Nashik, Pune, Taloja MIDC, Rabale, Turbha, Pawana MIDC, Gandhidham, Kandla, Jamnagara, Mundra, Sikka, Surat, Hazira, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai Ennore, Goa, Manglore, Dubai, Sharjah, AbuDhabi, Ajman, Diera, UAE Middle East, Oman Muscat - Barka, Ruwi, Sudan, Yemen

34022090

Descaler

FAQ: 
Coil Descaling Chemicals
Descaler quantities and using procedure ?

Corrosion Inhibitor Pretreatment Filming Agent

RXSOL-81-8154-210  is composed of chelating agent, dispersant, pretreatment filming and surfactant. The chelating agent can chemically adsorb ferric and calcium, forming a hard film on metal surface.

Alias: 

TH-707 Pretreatment Filming Agent, Corrtreat 702, Dustless Blasting Rust Inhibitor, INHIBITOR CORROSION CORR12814A

Active Matter: 
98-100
Application: 

It has the advantages of quick filming, film homogeneization, chemical stable and low corrosion ratio. It can be used as pretreatment filming agent for equipment and pipeline of new system or after heavy repair. RXSOL-81-8154-210 is not affected by copper and ferric ions in water system.

Packing Size: 
210.00 Ltr.
Using Procedure: 

The dosage of 200-500mg/L is preferred. Pretreatment filming time for cold state is 48-72 hours, and for heat state is 24-48 hours.

In oil and gas production systems RXSOL-81-8154-210 Corrosion Inhibitor (Preteratment Filming Agent) is a strong film forming  corrosion inhibitor.

It is a blend of partially neutralized amines and volatile amines in an aqueous based solvent system, It can use by continuous injection into oil production flowlines.

Note: 

Safety Protection:

Acidity, avoid contact with eye and skin, once contacted, flush with water.

Related Products: 
RXSOL Altreat 400
Condensnol Amine Evaporator Treatment
Safety Accessories: 
Hand Gloves Chemical resistance
Goggle Chemical Protective
Short Description: 
It is composed of chelating agent, dispersant, pretreatment filming and surfactant.

RXSOL BRAND Oilfield Chemical Products Company and supplier in Mussafah Industrial Area Abudhabi, Dubai, Sharjah, Ajman, Fujairah UAE, Muscat Barka Sohar Oman.

RXSOL Brand some valuable Oil field Chemical products are as follows:

 

Corrosion Inhibitors for Drilling : Which protects from corrosion all drilling equipment including tools, drill string pipes, tubulars, and other accessories.

Defoamers : Helps to control foaming during drilling fluids operation.

Foaming Agents : Helps to enhance foam during production of drilling fluid.

Detergents : Plays very important role to minimize the surface tension of the liquid phase and remove drill solids.

Oxygen Scavengers ::: Most important maintenance and oil field treatment chemicals which helps to collect and remove H2S from salt-based (brine) fluid systems.

Viscosifiers are thickening agents that increase the viscosity of water-based and non-aqueous-based drilling fluids, including oil-based and synthetic-based drilling fluids.

Corrosion Inhibitor Preteratment Filming Agent manufacturer, Exporter and supplier in India Oman UAE Middle East. Supplier of Corrosion Inhibitor Preteratment Filming Agent in Muscat, Sohar, Barka, Ghala Oman, Fujairah UAE, Sharjah, Ajman, Abudhabi, Dubai, Mumbai, Gandhidham, Kolkata, Chennai, Canada, Kenya Africa, Yemen, Basra Iraq

Filming forming amine based corrosion inhibitor

  • 5559 reads

Multi Purpose Degreaser

Alias: 

Rydall MP

Active Matter: 
72-81
Application: 

Renovate Industrial Multi Purpose Cleaner is a solvent-free, heavy duty restoration cleaner for the removal of dry soot, carbon, fire residues, filtration soils RXSOL MP multi-purpose degreaser  Industrial Cleaner is a water-soluble, alkaline solution that contains specially modified additives for improved oil holding capacity, surface wetting, and low-foaming attributes. Our Multi-Purpose degreaser is one of the strongest, non-solvent based, degreasers available on the market. RXSOL MP multi-purpose degreaser  Industrial Cleaner is developed for extreme applications where only the harshest of alternatives would cut the deposits.

RXSOL MP multi-purpose degreaser  Industrial Cleaner is a non-acidic, non-flammable, highly effective oil and fat remover, which is able to remove heavy organic components. RYDALL MP also provides a complete rinse off of the pollutants without any danger of combustion and without leaving any greasy films.and draught marks on carpets, fabrics and other surfaces.
• Highly effective pre-spray on polypropylene carpets.
• Can be used in conjunction with Colour "Safe Bleach OxiBrite" ( www.rxmarine.com/colour-safe-bleach ) Part No. - RXSOL-41-8731-025
• Cationic solvent-free formula “pulls out” soils by neutralising electrical charge.
• Deodorises on application.
• Red liquid with floral fragrance.
pH Concentrate: 12
pH Diluted: 10.5

Packing Size: 
25.00 Ltr.
Using Procedure: 

Normal soil:
Dilute 10 to 20ml A217 per litre of warm water (1:100 to 1:50).
Heavy soil and restoration: Dilute 50ml per litre of warm water (1:20).
Ceiling cleaning: Add 50ml "Safe Bleach OxiBrite" ( www.rxmarine.com/colour-safe-bleach ) Part No. - RXSOL-41-8731-025,  per 5 litres of Renovate Industrial solution. (Observe cautions below).

Pressure washing: 
Mix 1 part Renovate Industrial Multi Purpose Cleaner with 4 parts water and meter at desired setting.Always pre-test surface in an inconspicuous area before proceeding. Do not use on water sensitive fabrics, unsealed wood, aluminium or other delicate surfaces.Apply by sprayer, sponge or floor machine. Allow 2 to 5 minutes contact time for heavy soil, scrub if needed, then rinse surface thoroughly with clean water.  Observe all safety precautions. ear suitable personal protective equipment and cover all sensitive furnishings.

Note: 

RXSOL MP multi-purpose degreaser  Industrial Cleaner  is food-grade  as a safe general cleaner (A1) for food processing facilities!

 

RXSOL MP multi-purpose degreaser  Industrial Cleaner  is a water-soluble, mineral oil-free, alkaline solution containing specially modified additives for improved oil holding capacity, surface wetting, and low-foaming attributes. This non-acidic, non-flammable degreaser is also a powerful oil and fat remover effective in removing heavy organic components. RXSOL MP multi-purpose degreaser  Industrial Cleaner  completely rinses off pollutants without danger of combustion and leaving behind a greasy film.

Related Products: 
Degreaser Heavy Duty
Degresol High Flash Point Degreaser
Degreaser Solvent
Moya Oil Degreaser
Safety Accessories: 
Degreaser Bio Degradable
Degreaser Low Foam, Floor Cleaner
Degreaser Non Phosphate
Degreaser Soy and VOC Free Tar Remover
Short Description: 
Heavy duty industrial Multi Purpose cleaner for use on floors, walls, carpets, hard surfaces, porous surfaces and many other professional and disaster restoration applications. A highly concentrated can be use as multi purpose.

HOW TO USE RXSOL MP multi-purpose degreaser  Industrial Cleaner

Liberally spray on virtually any water washable surface and let sit for 20-30 seconds. Wipe clean and rinse with water. For stubborn stains, repeat the procedure. It is as safe and as simple as that! The reason for the short wait time is because the RXSOL MP multi-purpose degreaser  Industrial Cleaner is a highly effective oil and fat remover that is able to crawl under the residues on machines and equipment. This Multi-Purpose degreaser/cleaner includes specially modified additives for improved oil holding capacity, low foam, and maximum surface wetting. When sprayed on the equipment, RXSOL MP multi-purpose degreaser  Industrial Cleaner starts to soak around and underneath the oily accumulations, lifting them from the surface allowing the deposits to be wiped and/or rinsed away!

Multi Purpose Renovate Industrial Cleaner manufacturer and supplier in Navi Mumbai, Kakinada, Gandhidham, Surat, Chennai, Visakhpatnam, Andhra Pradesh, Kolkata, Chennai, Fujairah, Sharajha, Dubai, Abudhabi, Ajman, UAE Gulf, Ruwi Barka Sohar, Muscat Oman, Nairobi Kenya, Sudan, Yemen, Canada

Multi Purpose Cleaner

  • 63 reads

Calcium Hypochlorite Granules

Alias: 

Altoch GP, Chlorine Granuels 45 Kg

Active Matter: 
70-80%
Application: 

RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms. Since calcium hypochlorite as a solution is a very efficient killer of virtually all bacteria, algae and other objectionable micro-organisms, it is used as a standard for comparison testing of other sanitizing chemicals. While calcium hypochlorite is used primarily to chlorinate swimming pool, spa and hot tub water, and to treat water supplies and sewage, it is also frequently used as a bleaching agent and sanitizer in industrial applications.

Rxsol Calcium Hypochlorite granules can be used for continuous chlorination or applied manually.Swimming Pool, Spa and Hot Tub Operators use calcium hypochlorite as a routine sanitizer to kill and prevent the growth of algae, bacteria, and other microorganisms. It is also widely used as a shock treatment to destroy organic contamination in pool water, thereby improving the water clarity. Strong calcium hypochlorite solutions serve as disinfectants for cleaning pool sides and bottoms, decks, diving boards, ladders, floats, locker and shower room floors and benches, sinks and toilets.

Municipal Water Treatment —

Municipalities use calcium hypochlorite in place of chlorine gas or liquid bleach to purify water. It is also effective for treating wells; sanitizing new water mains; controlling algae, especially sudden growths, in reservoirs, filters and other equipment; treating sewage and controlling odors.

Wastewater Treatment —
Calcium hypochlorite is used to treat wastewater effluents under controlled conditions by textile mills, paper mills, tanneries, food processing plants and more.

Other Applications —

Other uses for alcium hypochlorite include sanitizing food and beverage containers and production equipment in dairies, restaurants, hospitals and farms. Calcium hypochlorite also is used to control algae and slime in commercial and industrial cooling water systems.

Packing Size: 
45.00 Kg.PWD
Using Procedure: 

HS Code 28281090

Drinking Water disinfectant easiest process is  to add  1-pound of calcium hypochlorite in granular form in to 10,000 gallons of drinking water.  And Calcium Hypochlorite is widely available for use as swimming pool chlorine tablets or white powder that is much more stable than chlorine.
 

Variety of disease causing organisms including bacteria, yeast, fungus, spores, and viruses growing in water.  RXSOL brand have easiest method to test such polluted water by simple test method.

Note: 

Typical Properties

Chemical Name : Calcium Hypochlorite
Chemical Formula : Ca(OCl)2
Granular Bulk Density : lb/ft3 64
Chemical Assay of Calcium Hypochlorite
Active Ingredient  Calcium Hypochlorite : 73% nom
Inert Ingredients, Readily soluble salts : 27%
Minimal Available Chlorine : 70%
Solubility in Water Granular calcium hypochlorite dissolves readily at  : 77°F.
Sample Solutions : 1 lb. in 80,000 gallons = 1 ppm AvCl. 2 dry oz. in 1 gallon = 1% solution or 10,000 ppm
pH Solutions
AvCl, ppm : pH
100
200
600
1000		 :
:
:
:		 9.7
10.00
10.4
10.7
Related Products: 
Trichloroisocyanuric Acid Tablet
Sodium Hypo Chlorite 12-15%
Chlorine Tablet
Sodium Dichloroisocyanurate Dehydrate
Safety Accessories: 
Hand Gloves Chemical resistance
Goggle Chemical Protective
Chemical Protective Suit
Video Links: 
Calcium Hypo chlorites Chlorine source Granules
Article News: 
Calcium Hypochlorite granular form supplier
Short Description: 
RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms.

Other valuable water treatment products also available with us :

Calcium Hypochlorite 65 - 70% CHLORINE POWDER, 45 kg / drum

Calcium Hypochlorite 70 % 2G (Pack / 200 tables X 1.7 g )

Calcium hypochlorite 70%  200g tablet

Chlorine tabs Oasis 33mg ( carton /1000 tab)

CITRIC ACID MONOHYDRATE, 25kgs/bag

Citric Acid Anhydrous with 25 kgs /bag

Softener salt treatment SALT TABLET 25/BAG Packing : 25kg / bag                        

Purolite resin C100E, 25KG Bag

Sodium Hexametaphosphate  ( SHMP 68 %) with new date, Packing : 25kg bags

Carbon ,25 kgs/bag

Carbon with diameter 70-90 , 25kgs/ bags

SODIUM HYPOCHLORITE 

CHLORINE LIQUID PACKING  : 20 LITER CONCENTERATE : 10 TO 12 %

FORMALIN LIQUID PACKING : 25 LITER CONCENTRATE: 35 TO 37 %

HYPOCHLORITE ACID CONCENTRATE : 98% PACKING : 25 LITER
Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS) 
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Methanol Packed : 25 liter 20

50 % Hydrogen Peroxide Packed : 25 liter

Hydrochloric acid Packed : 25 liter

Mixed bed PUROLITE with 25 Liter / kgs /bag ,ANION OH ,PUROLITE MB400 

Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS) 
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Calcium Hypochlorite Granules manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Calcium Hypochlorite Granules at a competitive price from us. We have ready stock of Calcium Hypochlorite Granules in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

#CalciumHypochlorite_Granules
#Chlorine_Granules
#ChlorineGranules_supplierMuscatDubai

Chlorine Granuels Powder

FAQ: 
How to Disinfect Water Using Calcium Hypochlorite

Corrosion Inhibitor for metal RUST Preventive

Corrosion Inhibitor for metal RUST Preventive is a general purpose solvent based corrosion preventive. It is an organic rust inhibitor, which has water displacing properties and is a fingerprint neutralizer. The protective coating is thin, transparent, clear and slightly oily.

Application or immersion type dewatering and protective fluid.

Alias: 

TECTYL 506 , Oxykote, Rust Preventive, ORION 445, ESSO Rust/BAN 397, ARDROX 3965, WEDOLiT AN 6111, CI 6111, VALVOLINE Tectyl 891, VERZONE OIL 1022

Active Matter: 
94-98
Application: 

Corrosion Inhibitor for metal RUST Prevantive  protects all ferrous and non-ferrous metals during processing, indoor storage and wrapped shipment (up to 12 months).

Corrosion Inhibitor for metal RUST Preventive  is a “natural” for the bearing industry. Finished bearings can be dipped in Corrosion Inhibitor for metal RUST Prevantive   to displace water-based metalworking fluids and provide corrosion protection of the highly finished parts during wrapped shipment. It can also be used for automotive parts and other precision and semi-precision parts.

Packing Size: 
25.00 Ltr.
Using Procedure: 

RECOMMENDED STARTING DILUTIONS

Corrosion Inhibitor for metal RUST Preventive  is to be used as is. Add no other materials to dilute the concentration unless approved by  RX Marine International technical team.

Note: 

FEATURES & BENEFITS

VERSATILE:
Corrosion Inhibitor for metal RUST Preventive   rapidly displaces water from metal surfaces leaving a continuous polar protective film between the metal and water.

Corrosion Inhibitor for metal RUST Prevantive  is applied with in-process spray or dip tank application where fluid run-off is collected for reuse; water will settle quickly to the bottom of the rust preventative reservoir. The water can then be drained periodically from the bottom. 

Corrosion Inhibitor for metal RUST Prevantive  can be applied to wet or dry parts. It neutralizes fingerprint residues and protects ferrous and non-ferrous metals from corrosion.

Related Products: 
Anti Rust Chemical
RustoCIDE
Acid Shield Metal Guard Acid Corrosion Inhibitor
Safety Accessories: 
Antiscalant Antifoulant Corrosion Inhibitor 704
Acid corrosion Inhibitor RXSOL 213
Short Description: 
Metal RUST Prevantiveprotective coating is thin, transparent, clear and slightly oily.

Corrosion Inhibitor for metal RUST Preventive manufacturer, exporter and supplier.

Corrosion Inhibitor for metal RUST Preventive manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Corrosion Inhibitor for metal RUST Preventive at a competitive price from us. We have ready stock of Corrosion Inhibitor for metal RUST Preventive in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Metal RUST Preventive

  • 11270 reads

Polyelectrolyte

RXSOL Polyelectrolite is a unique, medium molecular weight, anionic polyelectrolyte designed to be used as a precipitation aid and sludge conditioner for waste water treatment systems.

Application: 

APPLICATION & ADVANTAGE :

Immediate flocculation activity.

Non-hazardous to use.

RXSOL Polyelectrolite has been found particularly effective for metal finishing and most industrial thickening and clarification operations as well as metal hydroxide precipitation.

Very economical to use.

RXSOL Polyelectrolite  is designed to be used at full strength, eliminating the need to make up stock solutions prior to use, thus completely eliminating the make up difficulties of powders and emulsions. It blends into the waste stream immediately with no undissolved particles, globules or waste.

Effective over a wide pH range.

Works well with other treatment aids.

RXSOL Polyelectrolite  concentrated formula is extremely economical to use. One gallon of RXSOL Polyelectrolite will treat up to 100,000 gallons of waste water. It may be injected into a flowing stream, or may be metered into an agitated flocculator tank.

Packing Size: 
25.00 Kg
Using Procedure: 

RXSOL Polyelectrolite should be metered full strength into the flocculation station of conventional hydroxide precipitation waste water treatment systems. Typical feed rates of RXSOL Polyelectrolite vary from 8 to 12 ppm which is the equivalent to one gallon treating 25,000 to 82,000 gallons of waste water. RXSOL Polyelectrolite works well over a wide pH range with values of 7.5-10.0 being optimum. Uniform agitation is vitally important for optimum contact. Mild agitation by low speed non-shear agitators is recommended. Do not use high speed mixers or pump recirculation for mixing or an agitator speed over 100 RPM. These methods will shear and break up the floc formation. Due to the wide variety of waste water treatment facilities, equipment and waste material to be treated, it is recommended that a water treatment study be performed to assure the most cost effective treatment method available. .

Note: 

STORAGE/HANDLING

Store at 40-95° F (5-35° C) for maximum stability. Keep away from heat, sparks and open flame. Do not get in eyes, skin or clothing. Do not take internally. Wear proper protective clothing and face shield. Material spilled on floors is very slippery and most difficult to wash down. Material should be scooped up as much as possible and the remaining thin film adsorbed with absorbent clay or sweeping compound. Refer to the Material Safety Data Sheet for more complete details.

Related Products: 
Anionic Polyelectrolyte (RX Floc 100)
Flocculant Anionic Polymer DAF
Safety Accessories: 
Hand Gloves Chemical resistance
Goggle Chemical Protective
Short Description: 
Anionic polyelectrolyte used in raw water and wastewater treatment

POLYELECTROLYTES

High Molecular weight flocullant polymers available in Anionic, Cationic grades
Description:
High molecular weight flocullants are capable of promoting flocullation by neutralizing the superficial electric charges of sludge particles in the water and unstabilizing each individual particles. The particles then are absorbed by the activated functional group in the flocullant polymer.

Powder Grades :  

Anionic Polyelectrolyte    
Cationic Polyelectrolyte

Water and Dustproof 10kg Bag

LIQUID Grades :  

Anionic Polyelectrolyte    
Cationic Polyelectrolyte  

(FOOD GRADE SUITABLE FOR DRINKING WATER)
High Density Polyethylene Carboys 50kg Carboy

Polyelectrolyte manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Polyelectrolyte at a competitive price from us. We have ready stock of Polyelectrolyte in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Waste water treatment chemicals Polyelectrolite

  • 4367 reads
stock-clearance.png