Tank Cleaner-20

Bilge Coat RXSOL

Bilge Coat (Sulphur Acid Neutralizer)

RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur. This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effective in use compare than other alkaline Materials.

Acts as Acid Neutralizer formed during sulphur voyages.

Alias:

RBM Bilge Coat 30 kg Pack

Application:

Dose and Using Procedure

• Use a clean Drum or any plastic tank. Fill the water up to 190 Ltrs and add the RXSOL concentrated Bilge coat 2-4 Ltrs. Stirr well and now it is ready RXSOL BILGE COAT SOLUTION to use.

• Pour 15 to 20 litres of RXSOL BILGE COAT SOLUTION directly into each hold sounding pipe from on deck. Replenish each time after the bilge water is pumped out.

Packing Size:

30.00 Kg.Liq

Using Procedure:

General recommandation 1 Jug per hold, per week.

Note:

Benifit :

>Bilge Protection against Acidic Water.
>Enviroment Friendly.
>Low quantity is sufficiant Due to High Concentration and easy ro transport.
>Can be Easly Use and make the solution by Ship Crew on board.
> Due to liquid easy to handle and safe compare than other solid alkaline materials.

Related Products:

BARRIER HOLD COAT

Slip Barrier Coats HOLD BLOCK

HBI CARGO Hold Wash Concentrate RX 25 Ltrs

Hold Wash Concentrate RX

Diaphragm Pump

Shoulder Pesticide Pumps Sprayer

Plastic Hand Pumps

DEGREASER

TPOL 20 Ltr BUCKET

Hand Cleaner Paste, Waterless 1 Kg Pkg

Slip Barrier Coats HOLD BLOCK

Safety Accessories:

Gloves Disposable

Goggle Chemical Protective

PVC Chemical Resistance Boot

Article News:

Bilge Coat (Sulphuric Acid Neutralizer)

Alkaline high foam ship hold cleaning detergent supplier in India and Middle East

ALKAATUFF Heavyduty Alkaline ship hold cleaning detergent and chemicals

Short Description:

RXSOL Bilge Coat is highly effective chemicals and an alkaline Solution for the Bilge Line and well during the carry of cargo as like Sulphur.This Product act as a neutrilizer for the collection of Acidic Bilge Water. Bilge coat is more safer and effect

Acid Neutralizer is very effective product to neutralize acidic cargo residue.

#BilgeCoat_PipavaGUJRAT
#BilgeCoatSupplier
#BilgeCoat_UAEoman
#Bilge_CoatMUSCAT
#BilgeCOAT_MumbaiKolkataVizagChennaiParadip

We are in Marine cleaning chemicals and keeping ready stock of Tank cleaning chemicals for tanker vessel and also ship hold cleaning chemicals for Dry Bulk Carriers available ready stock at all Indian and UAE - Middle East coastal. Please feel free to Contact us, we will answer 24 hours, 7 days a week.

Bilge Coat Acid neutrailzer supplier in Kandla - Deen Dayal UPadhya Port, Sikka, Mundra, Hazira, Mumbai, JNPT Nhava Seva, Goa, Manglore, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Sohar, Ghala, Ruwi, Barka, Muscat, Oman, Ruwi Barka, Sudan, Yemen, Mombasa

Which is the best ship hold marine cleaning chemicals?

No one can answer this question, As cleaning of ship Bulk carrier is fully depends up on there cargo nature. For example if vessel is carrying cement then Cement Cleaner will works as best ship hold cleaning chemicals similarly for lime cleaning, Lime remover is best while for general cleaning ALKAATUFF Ship Hold Cleaner, Aquabreak high foam.

Corrosive cargo like Sulfur, Salt extremely damaging ship hold metal surface as after getting moisture during transit such cargo releas acid which is highly coroding the metal surface and causing pit on surface. Wise man knows about such chemical reaction between metal and such cargo and before loading they are using polymer based thin layer, which is commonly called Slip PolyCoat - Hold Block.

RX MARINE INTERNATIONAL is one of largest cement cleaner, lime cleaner, ALKAATUFF Ship Hold Cleaner, Aquabreak, Slip PolyCoat and many other various type of marine chemicals in India and Middle East. And we are marine chemicals supplier in Mumbai - JNPT - Nhava Seva, Kandla - Deen Dayal Upadhyay, Mundra, Sikka, Navlakhi, Surat Hazira, Chennai - Ennore, Visakhapatnam, Gangavaram, Kolkata - Haldia - Buz buj, Paradip, Manglore, Goa, Fujairah, Dubai, Abu Dhabi, Sharjah - UAE.

Email : mail@rxmarine.com

Acid Neutralizer

FAQ:

Sulphur cargo handling tips

How Bilge Coat is useful for protection of Bilge Line and Well

12389 reads

Demineralised Water

Extremely high quality Demineralised Water D.M WATER. It is produced by means specialist piece of equipment to produce it called a demineralisation plant or a deionisation plant. After completion of chemical treatment.

Alias:

D.M.Water, Demineralized, DM water

Application:

This type of water is routinely used for:-

Laboratory applications such as autoclaves and laboratory testing
Automotive cooling systems
‘Lead-acid’ type vehicle batteries
Laser cutting
Steam irons
Aquariums
Humidifiers
Cosmetics (where the word ‘aqua’ appears on an ingredients list it often refers to Demineralised Water)
Fine-mist fire-fighting equipment
Aircraft engine cooling systems
The final rinse of car and window washing systems as it leaves no smears

Packing Size:

210.00 Ltr.

Using Procedure:

The incoming water passes over a series of SPECIALIZED RESIN BEADS which remove mineral ions and other impurities from the water. This is why Demineralised Water is also known as Deionised Water; the process removes minerals and ions leaving water which is de-mineralised or de-ionised. Demineralised Water is also known as Demin Water, DI Water and DIW.

Demineralised Water –
Conductivity : < 10.0 Micromohms/cm.
TDS : 3 – 4 PPM,
Hardness – Nil ,
Chloride – Nil,
Total Alkalinity : 5- 6 PPM

Short Description:

Extremely high quality DM Water. It is produced by means specialist piece of equipment to produce it called a demineralisation plant or a deionisation plant. After completion of chemical treatment .

#DEMINERALIZEDWaterMussafahIndustrialAreaAbudhabi
#DEMINERALIZEDWaterDubaiSharjahFujairah
#DEMINERALIZEDWaterBarkaMuscatOmanRUWI

Demineralised Water DM Water manufacturer Turbhe Navi Mumbai, Gandhidham GIDC ANJAR, Howrah Andul Kolkata Haldia, Visakhapatnam, Chennai Dubai, Sharjah, Ajman, Abudhabi, Fujairah UAE, Muscat Barka Ruwi Ghala Oman, Kenya Nairobi, Canada

DM water

FAQ:

why Demineralised Water is also known as Deionised Water?

Tank Cleaner-20

5753 reads

Tankclean ECO

HEAVY DUTY TANKCLEANER MANUFACTURED FROM NATURAL RAW MATERIALS WHICH CONTAINS NO CHLORINATED OR AROMATIC HYDROCARBONS
• More effective than solvent cleaners.
• Non-toxic and environmentally safe.
• Safe to use because of its high flashpoint.
• Completely biodegradable.
• Replaces most conventional tankcleaners and cleaners.

Alias:

CareTank Eco, MARCLEAN ECO, Emulsifying Cleaning Agent 210 Ltr

Active Matter:

72-75

Application:

RXSOL Tankclean Eco is designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.

Packing Size:

210.00 Ltr.

Using Procedure:

Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.

Pre wash :-
Before cleaning with RXSOL Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending on the type of cargo.

Recirculation method ::: Refer Below.

Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.

Note:

Description

Tank Cleaner Eco is “the strongest there is” water-based, non-caustic cleaning and degreasing agent. It is based on

the latest and most powerful biodegradable surface-active and emulsifying agents. It contains fatty alcohol ethoxylates metasilicates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal

for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning

chemicals have reduced effect with seawater.

Product benefits, Application & Features:

• Non-Flammable • Suitable in sea & fresh water

• Leaves no film in the cargo tanks • Biodegradable

• Easy to apply. Effective and economical in use • Contains no ethoxylated nonylphenol (NF)

Related Products:

Tall Oil (Crude rosin) Cleaner

Advance Ship Tankclean

Article News:

Emulsifier solvent degreaser MSDS

Short Description:

Designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish and animal oils and fats, fatty acid

Tankclean ECO effectively cleans vegetable, animals, and fats. Tanks containing drying or semi-drying oils should be flushed or prewashed or moisten as soon as possible after completion of discharging to prevent the formation of hard tenacious residues.

Expert suggestion: To save tank cleaner, strip all residue manually which will reduce the quantities and consumption of chemicals required. Never overheat the tank which may cause dryness of residue.

Spot cleaning after most CPP / hydrocarbons.

1. Tank Cleaner Eco may be sprayed on the bulkhead neat or diluted, to areas where residues remain after tank washing, “Spot Cleaning”. A heated dilution is found to be very efficient.

2. The product should be allowed to stand for 10-30 minutes prior to re-washing areas. Do not leave the product to dry on the bare coating.

3. Clean areas by flushing manually with high pressure, using fresh water, or by performing a re-circulation. For persistent deposits, agitation by scrubbing will assist the cleaning operation. Heated water will increase the cleaning effect.

ZINC coating TANK cleaning - Zinc structure is porous, a prolonged pre-cleaning with lower temperatures is highly advisable.

Tank clean ECO supplier in Mumbai, Nhava Seva, Surat - Hazira, Kandla - Deen Dayal Port, Mundra, Sikka, Jamnagara, Hazira, Gandhidham, Manglore, Goa, Visakhapatnam - Gangavaram, Chennai - Ennore, Kolkata - Haldia - Buz Buj, Paradip. We are also one of largest tanclean ECO supplier in Fujairah, Dubai, Sharjah, Abu Dhabi - Middle East, UAE, Sohar, Muscat Oman

Tank Clean ECO is one of popular and classified marine Tank Cleaner. TANK CLEAN ECO is a highly concentrated natural based cargo tank cleaner. It is free from chlorinated/aromatic hydrocarbons, caustic and alkalines. It can be used for the cleaning of palm oil, vegetable oil, fish oil and soybean oil from cargo tank surfaces.

Non-caustic tank cleaner for Mineral, Petroleium products, veg oil, animal oil, fats etc.

Tank Cleaner-20

7564 reads

Aqua Wash Cleaner

Aqua Wash Cleaner is a superior degreaser also can be utilized as general purpose cleaning and degreasing agent for removal of oil and residues including salt, coal dust and its residues. Aqua Wash Cleaner contains anionic and nonionic surfactant including the powerful alkaline dispersing agent. Aqua Wash Cleaner can be used on most common metals, synthetic materials, rubber and hardened paints and lacquers.

Alias:

N 4, AQUA WASH

Active Matter:

45-48

Packing Size:

210.00 Ltr.

Using Procedure:

Direct injection Recirculation method : Dose rate: 0.5 – 5 litres per tonne wash water (0.05 – 0.5%) through tank washing machines
Ultrasonic tank cleaning. 50ml : 50 ltrs water (increase as required).
Spraying Method : It may be used neat or diluted by up to 50 parts of water, according to the amount and type soil to be removed For contamination, Aqua Wash Cleaner is sprayed on undiluted and left for 20 - 60 minutes. It must then be hosed off with a powerful waterjet, whilst brushing the surfaces.

General cleaning: Aqua Wash Cleaner can be diluted to a 2% solution in water for light cleaning. It must be allowed to soak for 1-15 minutes before rinsing with a waterjet. The effectiveness of the product is increased by using water at a temperature of 20 up to 60°C for dilution and rinsing.

Spot Cleaning. Hand sprayed neat or diluted up to 1 – 5 parts water and left for about 20 – 30 minutes before washing off with water

For removal of final coal dust residues, spray on neat, leave for 10 – 20 minutes and then pressure wash with fresh or sea water.

Related Products:

ALKACLEAN s. LAC

Metal Clean Britte

Alkaleen Cleaner Safety Liquid

CTC Volc Cleaner

Article News:

Heavy Oil Cleaner Tank Cleaner and Degreaser

Tank Cleaning Chemicals

Short Description:

Superior tank cleaning chemicals degreaser also can be utilized as general purpose cleaning and degreasing agent for removal of oil and residues mineral, animal, vegetable and fish oils.

Aqua Wash Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Aqua Wash Cleaner at a competitive price from us. We have ready stock of Aqua Wash Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Powerful alkaline tank cleaner

3932 reads

ALKALINE HD coal remover

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.

Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.

Alias:

Rock Phospate Cleaner, PETCOKE looser, COAL REMOVER RX Hold 220 Ltr

Active Matter:

54 - 63

Application:

• Use cold - No Heating required.
• Easily dissolves deposits containing carbon , polymer resin etc.
• Economical to use.
• Scraping not required.
• Non- flammable.
• Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
• Cleans oil side of fuel heaters, oil coolers, etc.
• Can be used for cleaning of : -Fuel Oil Filters - Pistons - Piston rings - Valve cage

Packing Size:

220.00 Kg.Liq

Using Procedure:

Directions for Use and Dose Rates

Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.

Cleaning Procedure

Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8–10 square meters.

NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

Note:-
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
• Stubborn deposits should be scrubbed to assist the cleaning operation.

Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Note:

COAL REMOVER manufacturer and supplier in India / Turkey / Middle East. We havs stock point in Mumbai, JNPT, Surat, Hazira, Mundra, Kandla, sikka, Goa, Manglore, Visakhapatnam, Kamraj Port, Ennore, Chennai, Kolkata, Buz Buz, Paradip, Fujairah, Istanbul, Dubai, Sharjah, Abu Dhabi, Gulf.

We are classified as COAL REMOVER exporter of RXSOL brand.

you may click below to get all location details :::

For Tamilnadu - http://ennoreindiachemicals.com/contact-us

For Andhra Pradesh - http://vizagchemical.com/contact-us

For East Coastal - http://eastindiachemicals.com/contact-us

For Gujrat Port - http://westindiachemical.com/contact-us

For Mumbai Port - http://marinechemical.in/contact-us

For JNPT - GOA - Manglore port - http://rxchemicals.com/contact-us

For Middle East - Gulf - http://www.dubichem.com/contact

Related Products:

ACQUATuff High Foam

Cement Remover RX Hold

Safety Accessories:

COAL REMOVER RX Hold

Iron Ore Red Dust Cleaner

Article News:

SHIP CARGO HOLD CLEANING DETERGENT supplier in India UAE Oman

Short Description:

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

Ship Hold Coal cleaning chemicals typical video Link. We are one of largest coal cleaning chemicals - detergent manufacturer and supplier in India and Middle East.

This product is most popular for Ship Hold cleaning detergent for coal cleaning. Shipchandler Shipping Agent can get good discounts directly from our factory by providing there registered accounts number.

#CoaLremover_Mumbai
#CoaLremover_MundraKANDLA
#CoaLremover_Visakhaptnam
#CoaLremover_FujairahMuscat
#AlkalineCleaner
#ShipHoldCleaner_Alkaline

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit. Also help to remove stains and discolouring after discharge of coal cargoes.

Cost effective SOLUTION for cleaning aſter coal residues, specific ore residues.

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER.

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent / holdbrite with 5 ltr water. Then Mix (A) and (B) to spray on coal deposited and stain area.

Other valuable product -
For RUST REMOVING use RXSOL-16-1088-025 And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Coal Remover - Powerful ship hold cleaning detergent manufacturer and supplier in Navlakhi Port, Hazira, Sikka, Jamnagara, Kandla, Mumbai, Manglore, Goa, Chenna Ennore, Visakhapatnam Vizag Gangavaram, Kolkata Haldia, Paradip, Manglore, Fujairah, Abudhani, Ajman, Sharjah, Barka, Muscat Oman, Canada, Kenya Nairobi Mombasa

Cost effective SOLUTION for cleaning aſter coal residues, specific ore residues.

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER.

Other valuable product -
For RUST REMOVING use RXSOL-16-1088-025 And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Ship Cargo Coal cleaning chemicals

FAQ:

How Coal remover cleaning property can be enhanced

1050 reads

Corrosion Inhibitor for Diesel Cooling Water Treat

Corrosion Inhibitor for Diesel Cooling Water Treatment - RXSOL CIDC is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid, also used as a corrosion inhibitor ( Protects all the metals including cast iron, mild steel, copper .)

Alias:

E.W.T. Inhibitor 9-131c, Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC

Active Matter:

45-50

Application:

The stable oxide film that is formed by RXSOL CIDC prevents corrosion caused by the electrolytic action between dissimilar metals used in the system .RXSOL CIDC has been field tested and found to have no detrimental effects on non-metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL CIDC incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Packing Size:

25.00 Ltr.

Using Procedure:

Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval.

Note:

In cases where systems are contaminated with oil and/or scale, they should be cleaned before starting to apply RXSOL CIDC.There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL-20-2002-025 and descaling by using RXSOL 1008.

Related Products:

ROCCOR NB RXSOL Colour Indicator

RXSOL 2000 Corrosion Inhibitor

Sodium Molybdate

Engine Guard NB Scale Inhibitor DEWT

Heavy Duty Cleaner

Short Description:

Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib

Information:

Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC specialized product for Marine and shipping industrial use. Major supplier in all INDIAN and UAE Middle East coastal. RXSOL CIDC Prolong the life of equipment by keeping scale and corrosion free.

RXSOL CIDC Water-soluble corrosion inhibitors FOR MTU engine.

Advatages : -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL CIDC is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product accidentally overdoses, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.

2. Improves generating cooling efficiency by maintaining a clean heat transfer

3. Corrosion protection by using a superior corrosion inhibitor.

4. Reduced maintenance and downtime

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Marine Diesel Engine specialized corrosion inhibitor.

NOTE : Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine, life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2-month interval.

Marine Chemicals

Boiler water treatment chemicals

Fuel oil treatment chemicals

Tank cleaning chemicals

Test kits and reagents

Cooling water treatment chemicals

Oil spill dispersant

Electric cleaning chemicals

Air cooler cleaning chemical

Antiscalants

Defoamers /Surfactants

Oxygen Scavengers

Custom Blending of Water Treatment Chemicals

Water Treatment Chemicals - Raw

Coagulants

Flocculants

Disinfectants

Corrosion Inhibitors

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40%

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC).

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate.

Boiler Water Treatment Chemicals

Precleaning & Passivation

Scale Inhibitors

Corrosion Inhibitors

pH Booster (Inorganics & Organics)

Descaling Chemicals (online / offline)

Sludge Conditioner

Condensate Treatment Chemicals

Amine Based treatment Scale Inhibitors

Corrosion Inhibitors

Biocides

Biodispersant

Dealkalisers

Descalants

Cooling Water Treatment Chemicals

Chiller Water

Treatment Chemicals

Pre cleaning Chemicals

Anticorrosion Treatment

Antimicrobial Treatment

STP Treatment Chemicals

Biocultures

Deodorants

Biomass Setting Agents

Disinfectants

Defoamers

Nutrients

Enzymes

ETP Treatment Chemicals

Coagulant

Flocculant

Decolorant

Dewatering Aids /

Filter Aids

Bioculture – Anaerobic & Aerobic

Deodorants

De-Emulsifiers

Polymers for Filter Press /

dewatering Evaporator Antiscalants

Water Treatment Chemicals

Biocides

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Dust control products

Membrane treatments

Metal passivators

Monitoring and control systems

Odor inhibitors

Oxygen scavengers

Scale inhibitors

Sludge dewatering polymers

MUNICIPAL water treatment chemicals

Coagulants/flocculants

Defoamers

Feed / make down equipment

Membrane treatments

Mixing equipment

Odor inhibitors

Scale inhibitors

Sludge dewatering polymers

MINING & MINERAL PROCESSING

Coagulants/flocculants

Dust control products

Filtration aids

Grinding aids

Monitoring and control systems

Non-sulfide flotation reagents

Rheology modifiers

Scale inhibitors

Specialty dewatering aids

Viscosity modifiers

CHEMICAL PROCESSING

Biocides

Cleaners

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Membrane treatments

Monitoring and control systems

Odor neutralizer

Oxygen scavengers

RO Membrane Treatment Chemicals

RO Pre -Treatment Chemicals

Membrane Antiscalants

Raw water RO (Food grade)

Effluent Recycle RO

Desalination Plants

Membrane Antioxidants

Membrane Cleaning Chemicals

Membrane Preservatives

Online / Offline Biocides

pH Boosters (Food Grade)

Taste Enhancers for RO Product water

Sanitizing Products for PSF, ACF Filter

Media and Pipelines.

Sugar Process Chemicals

Boiler Treatment Chemicals

Juice Clarification Aids

Syrup Clarification Aids

Mill Sanitation Chemicals

Viscosity Reducer

Anti Foamer / Defoamer

Evaporator Antiscalant & Descalants

Sugar Refining Compounds

Color Precipitants

Paper Process Treatment Chemicals

Anti Slimicides

Defoamers

Chemicals For Krofta Applications

Boil –out Chemicals

Vacuum Pump Antiscalant

ETP Chemicals

Water-soluble corrosion inhibitors FOR engine water treatment

16537 reads

Passivation Liquid RX

RXSOL PASSIVATION is highly conc and acidic product , It does not give Black or Yellow stain marks after washing with water. It simultaneously removes annealing colours, ferritic contamination & weld burns.
Spray is very safe & easy to use for cleaning of large equipments like S.S. vessels, dryers, agitators, dairy machinery, fermentators, internals as well as externals of pipes by pressurised spray bottle or pump. passivation proces improve the corrosion resistance of metal parts / surface.

Alias:

K2 Passivation liquid , IMO code 8-2031-T700, Avesta Classic passivating agent 601

Application:

It is used to clean weld seams and surrounding areas with brush. It is used to remove heavy scales, discolouration, annealing colours, rust particles near weld and welding affected area by heat.

Circulation method : For closed system like PIPE , use concentrated materials atleast for 1-2 Hrs . Then FLUSH the system with TECHNICAL GRADE OF DI-WATER ( which is free from , all SOLUBLE IMPURITIES )

Spray Method : For TANK PASSIVATION , this is very effective method . Directly spray on wall of TANKS atleast for 10-15 Minutes , then wash the system with cupious amout of fresh water , finally use TECH GRADE DI water for complete wash.

Procedure of Passivation

1. Isolate the exchanger and set up a circuit with an external tank with heating coil inside and a pump to circulate cleaning solution.

FLUSHING:-

2. Flush the Exchanger with fresh water to remove loose material (like dirt etc.) till such time clear water comes.

INHIBITED ACID CLEANING:-

3. Circulate inhibited Acid (5-6 % Citric Acid and 1% Rodine 213) along with non ionic wetting agent like RXSOL-T300 through Exchanger Loop for 6 to 8 hours
4. It total iron concentration reaches 5000 - 8000 PPM and concentration below 2% acid percentage then dump the cleaning solution and repeat the cycle with fresh inhibited acid.
5. Samples to be tested for pH, TDS and iron on hourly basis.
6. Normal operating temperature should be 50-60º C.
7. When iron concentration and acid concentration of solution reaches steady state and cleaning in completed. Drain the cleaning solution.

NEUTRALIZING:-

8. Circulate 1-2% solution of soda Ash for one to two for neutralization.
9. Rinse the neutralizing solution with water till pH of Inlet and Outlet is same.

PASSIVATION:-

10. Immediately fill and Circulate with 1-3% of solution of sodium Hexametaphosphate for 4-6 hours keeping operating temperature around 50-60º C. Analyze for Phosphate levels in Inlet and Outlet. (Normally maintain 30-40 PPM O-PO4 level)
11. Drain the passive solution without flushing with water.

DRYING:-

12. Dry the circuit with dry air/N2.

Packing Size:

25.00 Kg.Liq

Using Procedure:

For Pickling This is probably the most commonly used method. Use a solution of nitric and hydrofluoric acids in water. We use ASTM A380, solution D. The formula is specified in A380 as 6 - 25% HNO3 and ½ - 8% HF in water at 70 -140 F (21 - 60 C) for about 30 minutes. This is a strong cleaning solution and may etch highly finished surfaces.

Coverage / kg : Approx. 100 meters of weld seam.

Note:

It also helps to detect pinholes after welding.

Why Passivation required ?

1. Stainless Steel owes its corrosion resistance to the formation of a chromium oxide surface layer but this happened due to presence of oxygen , And if the oxide has been stripped, perhaps by pickling, then the oxide layer takes a short time to reach its full thickness and this can be accelerated by passivation.

2. The heat tint produced by welding is not only unsightly but the thicker oxide layer includes chromium from the surface of the metal, lowering its corrosion resistance. Pickling both removes the oxide layer causing the colour tints and a thin layer of the underlying metal to restore the original properties.

3. Iron Contamination
A major cause of corrosion in service is iron contamination which can arise from a variety of sources. These include using tools made of mild or constructional steels like fork lifts being a common cause for abrasives that contain iron and any tool that has previously been used on non stainless steel. Cross contamination can also arise from grindings and debris created whilst working close by on steel, either in the workshop or on site. Iron contamination is not always obvious, if it is suspected it can be detected using the ASTM A380, ferroxyl test. This is a rapid test in which a solution turns blue in the presence of iron. Pickling is a very effective method of removing this iron contamination from the surface.

Related Products:

Passivation Method verson II

Short Description:

Passivation Liquid RX manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Passivation Liquid RX at a competitive price from us. We have ready stock of Passivation Liquid RX in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Read more
5778 reads

Passivation Liquid RX

RXSOL PASSIVATION is highly conc and acidic product , It does not give Black or Yellow stain marks after washing with water. It simultaneously removes annealing colours, ferritic contamination & weld burns.
Spray is very safe & easy to use for cleaning of large equipments like S.S. vessels, dryers, agitators, dairy machinery, fermentators, internals as well as externals of pipes by pressurised spray bottle or pump. passivation process improve the corrosion resistance of metal parts / surface.

Alias:

Nitric Acid Blend , IMO code 8-2031-T700

Active Matter:

68-72%

Application:

It is used to clean weld seams and surrounding areas with brush. It is used to remove heavy scales, discolouration, annealing colours, rust particles near weld and welding affected area by heat.

Spray Method : For TANK PASSIVATION , this is very effective method . After dilution 10 - 20% Directly spray on wall of TANKS atleast for 10-15 Minutes , then wash the system with cupious amout of fresh water , finally use TECH GRADE DI water for complete wash.

Procedure of Passivation

1. Isolate the exchanger and set up a circuit with an external tank with heating coil inside and a pump to circulate cleaning solution.

FLUSHING:-

2. Flush the Exchanger with fresh water to remove loose material (like dirt etc.) till such time clear water comes.

INHIBITED ACID CLEANING:-

3. Circulate inhibited Acid (5-6 % Citric Acid and 1% Rodine 213) along with non ionic wetting agent like RXSOL-T300 (RXSOL-20-T300-210 ) through Exchanger Loop for 6 to 8 hours

4. It total iron concentration reaches 5000 - 8000 PPM and concentration below 2% acid percentage then dump the cleaning solution and repeat the cycle with fresh inhibited acid.
5. Samples to be tested for pH, TDS and iron on hourly basis.
6. Normal operating temperature should be 50-60º C.
7. When iron concentration and acid concentration of solution reaches steady state and cleaning in completed. Drain the cleaning solution.

NEUTRALIZING:-

8. Circulate 1-2% solution of soda Ash for one to two for neutralization.
9. Rinse the neutralizing solution with water till pH of Inlet and Outlet is same.

PASSIVATION:-

DRYING:-

12. Dry the circuit with dry air/N2.

Packing Size:

210.00 Ltr.

Using Procedure:

Coverage / kg : Approx. 100 meters of weld seam.

Passivation Treatments

• Grades with at least 16% chromium (except free machining grade such as 303):

20-50% nitric acid, at room temperature to 40oC for 30-60 minutes.

• Grades with less than 16% chromium (except free machining grades such as 416):

20-50% nitric acid, at room temperature to 40oC for 60 minutes.

• Free machining grades such as 303, 416 and 430F:

20-50% nitric acid + 2-6% sodium dichromate, at room temperature to 50oC for 25 40 minutes

Note:

It also helps to detect pinholes after welding.

Why Passivation required ?

Related Products:

Copper Sulfate LR for passivation test

Ferroxyl Test Kit for free IRON passivation

Palladium Chloride Passivation Test Kit

Passivation Liq. Blend with Citric Acid

Passivation Method verson II

Passivity Test Kit for PASSIVATION

Nitric Acid 68%

Hydrofluoric Acid 60 %

Alkali Cleaner RXSOL ORG - 6

Hand Cleaner Paste, Waterless 1 Kg Pkg

Chembreak QUICK SEPARATING DEGREASER

HCF Remover 210 Ltr

RX JELLY Pickling Paste

Muriatic Acid

Sodium Dichromate BICHROMATE

Passivation reagent 17

Passivation reagent 45

Alkaline Passivator

PL-CON Tank cleaner

DERUSTING Chemical

Safety Accessories:

Hand Gloves Chemical resistance

PVC Chemical Resistance Boot

Vinyl Gloves (1box =100pcs)

Video Links:

Passivation Pickling

Article News:

Metal Clean Bright

Short Description:

Carbohydrazide also passivates metals and reduces metal oxides converting ferric oxide to ferrous oxide and converting cupric oxide to cuprous oxide.

Carbohydrazide reacts directly with oxygen. It helps prevent oxygen damage and continues to passivate metal surfaces during wet lay-up. Carbohydrazide can also be used as a curing agent for epoxide-type resins.

Read more
14024 reads

Detergent Heavy Duty Alkaline Cleaner

Alias:

Professional Heavy Duty Alkaline Cleaner, Boiling Out Chemicals, SERFOLIN SP-167, UNIKLEEN 11, AQUALAR WATER BASED CONCENTRATE, NORCHEM AS 666, Blue Ocean Wash WaterBased Alkaline Degreaser, SODAKLENZ SUPER CONCENTRATED, AlkalineDegreasing 210 Ltr

Active Matter:

63-72

Application:

This product is recommended as a wall and floor cleaner in industrial facilities. May be used in pressure washer applications or hand steaming. Powerful cleaner/degreaser with controlled foam. Variable dilutions for the wide variety of applications. Economical choice. Effective cleaner.

This is an aqueous surfactant solution, alkaline base, food-grade phosphate product. Effective for degreasing and removal of oil residue, animal fat and vegetable bases on different surfaces: industrial equipment, including food, assemblies, transport, tanks, walls, floors and other surfaces, manual and machine washing of textiles and clothing. It has an average foaming capability when applied by hand or with the help of floor cleaning machines, pressure washers, equipment for foam cleaning.

Food service establishments
Hotels and motels
Educational facilities
Any general cleaning task
Heavy Industries and in PLANT area

This product is recommended as a wall and floor cleaner in industrial facilities, food service establishments hotels and motels educational facilities any general cleaning task.

It is also used in mechanical engineering, petroleum, and food industries, railway transport, office and warehousing, utilities and other industries.

Packing Size:

210.00 Ltr.

Using Procedure:

Dilute concentrated cleaner with warm water using 1 part Heavy Duty Alkaline Cleaner and 1 part water.

Apply mixed solution with a mop, sponge or sprayer. Avoid applying cleaner on unintended surfaces.

Lightly rub with a scrub brush or floor machine as needed. Allow cleaner for emulsification 1 to15 minutes for best results— do not allow to dry on the surface.

Remove solution using a sponge, wet/dry vacuum or damp mop.

Rinse the area well with clean water.

TYPICAL METHOD::: Dilute to proper ratio for the desired task, apply to surface and allow adequate contact time, wipe or rinse away.
Can be Use dilution of 1:100: 11.0 - 11.5 (1:100).

GENERALLY ::: In an aqueous solution, at a concentration from 10 ml to 200 ml per liter of water, depending on the degree of contamination.

For Boiler Cleaning :::

5 Ltr is sufficient for 1000 LTRS OF WATER.

The boiler should be warmed through by a slow fire, keeping the manhole closed, immediately after adding the chemical and pressure allowed to rise slowly. It should be raised sufficiently to
give a strong blow of steam at the air cocks. It should be allowed to cool and later blown down for about 15 seconds on each blow-down valve and refilled to about 5 cm level in the gauge glass. On the following day, carry out the same process except that the pressure is raised to approx 25 percent of the normal working pressure. On the third day, carry out the same process and then drain the boiler as detailed below –
When the pressure falls to 0.04 MN/m2 (0.4 kgf/cm2), the unit is blown down completely until it is empty, refilled to flood the drum and superheater and blown down again. It should then be carefully inspected. If any trace of oil or grease is observed, the process of boiling-out should be repeated. If the boiler is found free from grease or oil or sediment, it should be closed and filled with feed water as specified by the manufacturer.

Note:

Powerful cleaner its uses is Versatile and economical and It softens hard water Without odor and noxious fumes Easy to wash off Biodegradable, non-toxic, contains no VOCs base modifications, (minor modifications of content in Unikleen HD) does not contain ammonia or acid and not corrosive to metal, non-irritating to the skin and the respiratory tract. Passivating to metal surfaces Operates at low (from 30°C or 86 °F ) temperatures of the working solution It does not create a stable emulsion with washed out contaminants It has a long service life in the working solution.

Safety: Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Wash contaminated clothing before reusing. Wash thoroughly after handling.

Related Products:

Rig Wash Citrus Formula 25 Ltr

Rig Wash Green 1000 LTRS

SEA OIL CLEANER

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Short Description:

For removal of tough soils and its wide range of dilutions accommodate most any cleaning application. It can even be used in pressure washer applications or hand steaming. Heavy duty alkaline cleaner can be use as All-purpose cleaner and degreaser

Degreaser Heavy Duty Alkaline Cleaner manufacturer, Supplier and exporter.

Degreaser Heavy Duty Alkaline Cleaner manufacturer, supplier and exporter in India, Oman, UAE. We are keeping ready stock of Degreaser Heavy Duty Alkaline Cleaner at Mumbai, Visakhapatnam, Chennai, Kolkata, Gandihdham, Sharjah Dubai Abudhabi, Muscat Sohar Oman

Alkaline Soil Oil Grease Remover

FAQ:

Why LAC Liquid Alkaline Cleaner?

Read more
3272 reads

White Spirit

RXSOL-20-2105-210 solvents are white spirits. White spirits consist of complex hydrocarbon mixtures obtained by hydro-treating a petroleum cut. White spirits and mineral spirits blends are mixtures of paraffins, cycloparaffins and aromatic hydrocarbons with boiling ranges which typically lie between 150°C and 220°C. They are clear water-white liquids, chemically stable and non-corrosive and possess a mild odour.

Alias:

Mineral Spirits, Mineral Turpentine, Turpentine substitute, Stoddard Solvent

Application:

Applications : combining good solvent power and average evaporation rate, RXSOL-20-2105-210 products are primarily used in the paint, degreasing, metal and lubricants industries.

Packing Size:

200.00 Ltr.

Note:

These solvents are practically insoluble in water, but miscible in most organic solvents.And this solvents are stable, do not corrode standard metals but may however react with strong oxidants. Its boiling ranges which typically lie between 150°C and 220°C

Short Description:

White Spirit Chemical Solvent Supplier and Trader in Dubai, Fuajairah, Sharjah, Abudhabi, Ajman UAE - Chemical Raw Material Wholesale and Retail dealer and distributor in GCC, Middle East and Africa.

WHITE SPIRIT APPLICATIONS (SOLVENT 402, 404, 406)

White spirit serves a variety of purposes across different industries and domestic settings:

Paint and Varnish Thinning: Solvent is a common choice for thinning oil-based paints, varnishes, and stains. By reducing viscosity, it facilitates easier application, improving flow, and leveling.

Cleaning and Degreasing: An effective solvent, Solvent is utilized for cleaning and degreasing surfaces, tools, and equipment. It efficiently removes grease, oil, dirt, and grime from a range of materials, including metal, plastic, glass, and wood.

Stain Removal: Solvent proves effective in removing stains from fabrics, carpets, and upholstery, particularly adept at tackling oil-based stains like grease, tar, and oil.

Adhesive and Sealant Removal: In construction, automotive, and other applications, Solvent is employed to dissolve and remove adhesives, sealants, and caulks from surfaces.

Artistic Applications: Artists commonly use Solvent as a thinner and cleaner for oil-based paints. It also serves as a solvent for cleaning brushes and other painting tools.

While utilizing Solvent, it’s crucial to work in well-ventilated spaces due to its fumes and strong odor. Adhering to safety measures such as wearing gloves and eye protection is essential. Proper storage and disposal should align with local regulations, and following the manufacturer’s instructions ensures the safe and effective use of white spirit in specific applications. White spirits, including Solvent 402, are characterized by their clear, water-colored appearance, mild odor, and chemical stability. They do not cause corrosion and have a distillation range of 142 to 200 degrees Celsius and a boiling point of 105 to 205 degrees Celsius. These properties make them valuable across a range of industrial applications, from paint and varnish production to metal degreasing and gas purification.

Solvent Properties: White spirit is widely used as a solvent for cleaning, thinning paint, and degreasing surfaces. It effectively dissolves grease, oil, and various types of paint.

Paint Thinner: It is commonly employed as a paint thinner, helping to reduce the viscosity of oil-based paints and varnishes, making them easier to apply.

Cleaning Agent: Solvent is an effective cleaning agent for removing paint, varnish, and other coatings from brushes, rollers, and surfaces.

Industrial Applications: In industrial settings, Solvent is utilized in the formulation of adhesives, coatings, and various cleaning products.

Dry Cleaning: It is sometimes used in the dry cleaning process to remove stains from fabrics.

Automotive Industry: Solvent is employed for cleaning automotive parts, tools, and equipment.

Extraction of Oils: It is used in the extraction of oils from seeds and plants.

Agricultural Applications: In agriculture, Solvent may be used for cleaning and degreasing machinery.

It’s important to note that while Solvent is a versatile and widely used solvent, it should be handled with caution due to its flammable nature. Adequate ventilation and safety precautions are recommended when working with Solvent to minimize the risk of exposure and fire hazards. Additionally, various formulations of Solvent are available, each with specific properties suited for different applications.

White Spirit manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of White Spirit at a competitive price from us. We have ready stock of White Spirit in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Key characteristics and uses of white spirit include:

WHAT ARE THE WHITE SPIRIT GRADES?

White spirit is available in different grades, each with specific properties tailored for various applications. The main grades of Solvent include:

Low Odor White Spirit (LOWS): This grade is processed to reduce its characteristic odor, making it suitable for applications where a low odor profile is desirable, such as in indoor painting or confined spaces.

Regular White Spirit: This is the standard grade of white spirit and is widely used in general industrial and household applications. It is effective as a paint thinner, degreaser, and general-purpose solvent.

High Flash Point (HFP) White Spirit: This grade has a higher flash point compared to regular white spirit, making it less flammable. It is often chosen for applications where safety is a primary concern.

Hydro-treated White Spirit (HWS): Also known as hydrosol, this grade undergoes additional refining processes to remove impurities, resulting in a clearer and more stable solvent. It is suitable for applications where a higher-quality and more purified solvent is required.

Aromatic-Free White Spirit: This grade is processed to minimize the aromatic content, reducing the potential health and environmental impacts associated with aromatic hydrocarbons. It is often chosen for applications where low aromaticity is a critical consideration.

Bio-based White Spirit: Some environmentally conscious formulations use bio-based or renewable sources for white spirit production, aiming to reduce the reliance on petroleum-derived feedstocks.

The choice of white spirit grade depends on the specific requirements of the intended application. Factors such as odor, flash point, purity, and environmental considerations play a role in selecting the most suitable grade for a particular use. It’s essential for users to be aware of the characteristics of each grade to ensure safe and effective handling in various applications.

WHAT IS SOLVENT 402 ?

Solvent 402, also known as White Spirit, is a transparent liquid derived from petroleum. It is a blend of aliphatic and alicyclic hydrocarbons within the C7 to C12 range. With a distillation range of 142–200 °C and a boiling point spanning 105 to 205 °C, this solvent is widely employed as a common organic solute in painting and decorating.

WHAT IS SOLVENT 404 ?

Solvent 404, commonly referred to as white spirit, consists of paraffin hydrocarbons ranging from C5 to C8. It serves various purposes, including thinning lacquer, paints, and polishing and printing ink.

WHAT IS SOLVENT 406 ?

Solvent 406 is a blend of paraffinic hydrocarbons with a composition ranging from C5 to C8. Its versatile applications include serving as a diluent in varnishes, paints, sticky materials, and reprints. Additionally, it is utilized as a solvent in various industries, such as tire manufacturing, rubber and resin processing, adhesives, and tapes, making it valuable in the chemical, cosmetic, and food sectors.

Tank Cleaner-20

Read more
9703 reads

Search

Tank Cleaner-20