Tank Cleaner-20

Alkaline Safety Liquid 5G

Packing Size:

25.00 Ltr.

Short Description:

Best suitable non caustic hold cleaner, which is suitable to clean when next cargo is food grain.

20 reads

Alkaline Safety Liquid Plus

Packing Size:

25.00 Ltr.

Short Description:

Best suitable non caustic hold cleaner, which is suitable to clean when next cargo is food grain.

Tank Cleaner-20

19 reads

Neelkanth Marine Engineering Services

Account Id:

ACC106608

Billing Address

Billing City:

Mumbai

Billing State:

Maharashtra

Billing Country:

INDIA

Tank Cleaner-20

12 reads

Sodium Hypo Chlorite

Sodium Hypochlorite solution, Used for sterlizing water and swimming pool...This will - Remove odors. Remove Color. Improve permaganate time.

Alias:

Chloros, Bleach, Twin Oxide Compound A, Ipo chlor 16%, Ipochlor Bluetech, Sodium Hypo Chlorite 25 Ltr

Active Matter:

12-15

Application:

Also used as a disinfectant and germicide , especially in the sterilization of water.
It is also used for making wool unshrinkable and in the manufactire of chloroform.
For the purpose of disinfection and bleaching , a weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficientPotable Water Treatment
Aquatics and Pools
Odor Control/Corrosion Control
Food & Beverage Processing
Wastewater Treatment
Cooling Towers, Inland Power Stations & Industry
Irrigation Systems
Agriculture/Farming

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL: Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Packing Size:

25.00 Ltr.

Using Procedure:

6% Sodium Hypochlorite Solution. Disinfectant for use in drinking water. Use one drop of solution per 10 ltrs of drinking water, 600 ml of solution per 36 tons of drinking water.

General formulation to calculate how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration.

req'd residual in ppm
Volume of hypo = volume of water x ( ----------------------------- )
1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add ?

(5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

(5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

                                                                                                              req'd residual in PPM
Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )
                                                                                                               1,000,000 x hypo %

This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

(8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds

Note:

Spraying - Following rough washing to a good Water White or better, apply dilute Bleach to 1 - 3% strength. First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.

Injection -no.

Re-circulation - Following rough washing to a good Water White standard or better, apply dilute Bleach to 1-3% strength. Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 - 500C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-850 C after 45 minutes. Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.

** When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between tanks as required.

* Use a strainer at the pump stack when circulating any solution.
Tank Lining - Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).

**These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.

Carbon Remover

Specifically formulated for removal of completely carbon buildup, grease, oil, varnishes and other heavy deposits from diesel engine. Its unique combination effectively remove carbon deposits, varnish, gummy matter, baked / burnt on grease deposits and all persistent with high solvency and penetrating capabilities to remove carbonaceous residue formed by fuel engine part. RXSOL-16-1003-025 is a highly concentrated Wetting Emulsifying Agent which makes this product water soluble.

Alias:

Carbon Cleaner, CAR HEAVY Emulsion SNC 2000, Careclean Carbon Carbon Solvent, Eazy Safe CR, Tip Cleaner, SEA SHIELD CARBON CLEAN 79106, Carbon Dissolver, Carbon Remover 25 Ltr

Active Matter:

93 - 98%

Application:

For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.

SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.

carbon remover can dilute with water to makes it economical

carbon remover msds available on request

Its formulation makes it to use as a hard carbon remover

Also very effective to use as a baked carbon remover

carbon deposit remover is very effective to clean diesel engine parts, without scrubbing and harrashing original surface. due to its uniqunness kept this materials in best carbon removal agent

carbon deposit cleaner loosen hard deposit by emulsifying and pentrating formula.

carbon remover solvent is water missicible in nature.

Packing Size:

25.00 Ltr.

Using Procedure:

Depending upon the deposition either concentrated or diluted .If used diluted use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.

concentrated RXSOL-16-1003-025 is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers )

Note:

Non- evaporation prevents loss of chemical. Highly concentrate carbon cleaning product manufacturer and supplier for Marine Shippinga and heavy Industries. We are one of popular supplier of Carbon Remover in Visakhapatnam - vizag, Gnagavaram, Chennai, Mumbai, GOA, Manglore, Goa, Kandla, Mundra, Sikka, Kolkata, Haldia, Pirpav, Dubai, Sharjah, Fujairah.

CHARACTERISTICS :-

Unique chemical formulation with corroision inhibitor
Non- toxic
Extends time between cleans.
Effective removal of STICKER/CARBON DEPOSITS , completely heavy carbon, grease oil, varnish and other deposits as well as old paints, resins and lacquer coatings
Can be applied by all normal methods.
Formulated to be very cost effective.
Does not contain chlorinated hydrocarbons.
Can be used on all metals & most painted surfaces.
100% Active.
Dries Completely.
Does not require special feeding equipment for safe application.
Reduce downtime and maintenance costs.

Nitric Acid 98 % Tanker Load

Packing Size:

50.00 Kg.Liq

Short Description:

Extra pure NITRIC , removes iron residue & forms an oxide layer that boosts the corrosion resistance of the stainless steel intended to improve the corrosion resistance

Tank Cleaner-20

14 reads

Clean GEL

Clean GEL / Paste is highly concentrate paste which is used to clean metal areas and is applied with brush. Useful for preparing metal surface for painting. Paint will adhere better to iron and steel surfaces when cleaned with Clean Jelly.

Alias:

GEL Degreaser

Application:

It is used to remove heavy scales, discolouration, annealing colours, rust particles near weld and welding affected area by heat without grinding or wire brushing or buffing.

PROBLEM	CLEARING AGENT	COMMENTS
Rust and other corrosion products. Embedded or adhering "free iron	Very light rust stain can be removed by 10% nitric acid. More significant rust or embedded iron will require pickling. Also see previous sections on Passivating and Pickling. Sand or glass-bead blasting is another option	Wear PPE as appropriate. Afterwards rinse well with clean water. Mix in acid-proof container, and be very careful with the acid, (See Precautions for acid cleaners)
Routine cleaning of boat fittings.	Frequent washing down with fresh water.	Recommended after each time the boat is used in salt water.
Cooking pot boiled dry.	Remove burnt food by soaking in hot water with detergent, baking soda or amonia.	Afterwards clean and polish. with a mild abrasive if necessary. See comments re steel wool.
Dark oxide from welding or heat treatment.	"Pickling Paste" or pickling solutions given on previous page.	Must be careful rinsed, and use care in handling (see Precautions for acid cleaners).
Scratches on polished (satin or brushed) finish.	Slight scratches - use impregnated nylon pads. Polish with polishing wheel dressed with iron-free abrasive for deeper scratches. Follow polish lines. Then clean with soap or detergent as for routine cleaning	Do not use ordinary steel wool - iron particles can become embedded in stainless steel and cause further surface problems. Stainless steel and "Scotchbrite" scouring pads are satisfactory.

Packing Size:

5.00 KgPaste

Using Procedure:

1.Clean Gel / Paste is applied on metal surrounding areas with a nylon bristled plastic brush. Application Temp. = between 5 – 40 deg. C
2. Keep Paste for 5 to 30 minutes (contact time) depending on contamination, temperature .
3. Use pressurised water jet spray OR wipe the weld seam lightly with plastic brush & wash with water thoroughly.

For Satin / Dull Finish

1. First remove oil, dirt,buffing compounds etc, with Rxsol Degreaser. Add 50-75 gm/lit. in water (i.e. 1 kg Rxsol Degreaser in 15 to 20 lit. water) & stir to dissolve. Wipe S.S surface with cotton cloth or pressurized spray for 2-5 min. or soak for 10 min. Then, wash with water properly.

2. Clean Gel Paste is applied on weld seam & surrounding areas with a nylon bristled plastic brush or by Paste sprayer or circulated in pipeline with pump.

Application Temp. = Room temp.( i.e. between 25-35 C). If temperature is less than 25 C, then more time may be required and if temperature is more than 35 C, then uneven preocessing & drying of applied materials may result.Then, cool SS equipment by keeping it in shade or cover by temporary shade to protect that not directly under the sun light.

3. Keep Clean Gel Paste for 10-45 minutes depending on contamination & scale. ( generally kept for 10-30 min. and Pickling Spray generally kept 30-45 min. Depending on SS type and initial condition of SS parts)

4. Wipe the weld seam lightly with plastic brush or cloth & wash the Paste applied area with water thoroughly.

For Cleaning Mirror Bright SS Areas

THE BELOW STEPS WILL NOT AFFECT SHINE OF MIRROR BRIGHT POLISHED SS AREAS AND PROVIDE CONTAMINATION & STERILE PARTICLE FREE PASSIVATED SS SURFACE.

1) First apply Clean Gel Paste in weld seam & surrounding areas with a nylon bristled plastic brush. After 10 to 30 min. wipe with cloth or plastic brush & wash water thoroughly.

(Application of Clean Gel Paste ensures that black & red spots do not come on & near weld seams area as generally observed some days after bright buffing.)

2) Complete bright buffing / polishing procedure to make surface mirror bright & shiny.

DISCARD STEPS 1 & 2 ABOVE, IF SS SURFACE IS ALREADY BRIGHT BUFFED OR ELECTROPOLISHED.

3) Remove oil, dirt buffing compounds etc. with RXSOL Degreaser which is Metal Free Degreaser. Add 50-75 gm/lit. in water & stir to dissolve.

Wipe S.S. surface with cotton cloth or pressurised spray for 2-5 min. or soak small parts for 10 min. Wash with water prpoerly.

NOTE: It is better to rinse SS surface with 10 gm/lit RXSOL DEGREASER solution as the last step and then rinse with water to ensure complete removal of previously applied Passivate Pickling paste or spray from the surface.

Note:

Advantage & Benifit

Easy to apply.
Due to paste easy to use on vertical surface.
Simply washed with water.
Easy to handle.
Easly remove heavy scales, discolouration, annealing colours, rust particles near weld and welding affected area .

Nitric Acid 98 % Tanker Load

Packing Size:

20000.00 Kg.Liq

Short Description:

Passivation chemical

22 reads

Union Marine Management Services Pte. Ltd.

Account Id:

ACC106599

Billing Address

Billing City:

HarbourFront

Billing State:

HarbourFront

Billing Country:

Singapore

Tank Cleaner-20

17 reads

Nitric Acid 68% Tanker Load

Packing Size:

20000.00 Kg.Liq

Short Description:

Pasivation Grade Improve the corrosion resistance of parts made from austenitic, ferritic and martensitic corrosion-resistant steels of the 200, 300 and 400 series and precipitation hardened corrosion-resistant steels.

Tank Cleaner-20

14 reads

Search

Tank Cleaner-20

carbon remover can dilute with water to makes it economical