Slip Barrier Coats HOLD BLOCK
SKU: RXSOL-22-2210-025
Polymer water Resist thin layer on HOLD surface not only helps to keep ship hold surface ready and clean after discahrging the cargo but also providing protective layer from Hazardous cargo like Sulphur, Salt etc. Slip Barrier Polymer Coats HOLD BLOCK is providing thin layer on metal surface, which can be easily remove by high water pressure. POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.
Alias:
Slip Barrier Coats HOLD Block Resist, RBM HOLD BLOCK, GREEN BARRIER, HOLD SURFACE PROTECTOR, PRELOAD 300, HOLD BARRIER XR, Paint Protector
Active Matter:
72-81
Application:
Slip Barrier Polymer Coats HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it
Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX
This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.
Packing Size:
25.00 Ltr.
Image:
Using Procedure:
for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.
Note:
This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.
Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.
Other Valuable Hold Cleaners :::
Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050
Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210
Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050
BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210
COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050
Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050
Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210
PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210
HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025
Related Products:
Article News:
Short Description:
Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.
Information:
Polymer based water soluble liquid product which is resulting thin transparent and temporary film on cargo hold surfaces. Polymer based Thin film acts as barrier layer between the cargo and the ship hold surfaces.
Slip Barrier Coats HOLD BLOCK is a Heavy Duty protective Solution for the hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly.
$ Safe to use in occupied / covered areas.
$ Reduces turn around times.
$ Easy to Direct Spray.
Other Important materials, which help to control corrosion on the metal surface. Chemically SULPHUR producing STRONG acid in presence of moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedures.
RXSOL Bilge Coat (Sulphur Acid Neutralizer) Acts as Acid Neutralizer formed during sulphur voyages.
HOLD BLOCK chemicals supplier.
FAQ - Slip Barrier Polymer Coat
Capt. ravi.prakash 4:54 PM (3rd JAN'19)
to RX MARINE INTERNATIONAL
Dear Sir,
Ref our telcon, please find attached Hold photos after discharging of Australian Coal and cleaning (without applying any chemicals) in oct 2018 . Then vsl loaded Indonesian Coal and will be discharging same in abt a week. Next voyage is getting fixed to load Urea from Saudi. Basis the photos, which chemical would you suggest to be used. We were thinking of RXSOL PCS along with Alkaatuff. Fyi, Owners have supplied 1200 Ltrs of Alkaatuff HF last month.
Thanks & best regards,
Capt. ravi.prakash
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Dear Sir,
In image we can observe that BOTTOM line of hold is rusted, And your plan to load CLEAN CARGO like urea which is ammonia-ted product can result further heavy rusting. So here our suggestion is to go with PCS with Alkaatuff HF. And after cleaning hold rust can be treated with RUST CONVERTOR by the ratio of 1:100 Ltr with water, this will change free iron rust content to orginal metal colour. ( For treatment of rust Each Hold maximum 50 Ltr RUST CONVERTOR REQUIRED ) and Finally HOLD can be treat with SLIP barrier Polymer COAT polymer, with dilution ration of 1:100 Ltr with Water. ( For Each Hold polymer coating maximum 50 Ltr Slip Barrier Polymer Coat REQUIRED )
Refer this link to get IMAGE of CARGO HOLD. http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx
USES of slip barrier coat provide transparent POLYMER layer in between UREA and HOLD surface.
Application of SLIP Barrier Polymer COAT is always be wise decision, this will not only protect hold metal surface from UREA contact, but also helps to release cargo without adhesion on cargo.
Thanking you
WBRGDS
Silvi
http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx
Slip Barrier Polymer Coats HOLD BLOCK supplier in all major port of India and Middle East. We are keeping ready stock at Kandla, Mundra, Sikka, Navlakhi, Hazira, Mumbai, JNPT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Slip Barrier Polymer Coats HOLD BLOCK also works as surface releasing agent and due to its chemicals resitance nature protect metal surface of ship from hazardous cargo.
Protective Chemicals suitable for both sulphur and petcoke cargoes
- Boiler Chemicals-42
- Carbon Coal Charcoal-26
- Clean Air deodorizer-24
- Coolant Glycol Antifreeze-27
- Cooling Water Chemical-43
- Corrosion Inhibitor-44
- Deck cabin galley Maintenance-25
- Drain Clean Products-29
- Drilling Fluids & Mud Oil Field chemicals-81
- Electrical Cleaner-30
- Engine room Maintenance-16
- Paint and Cleaning solvent-18
- Passivation-38
- Radiator and AC coil cleaner-39
- RIGS Oil Field-34
- Rust Clean & Protect-28
- SHIP Chandler
- Ballast Tank Chem-23
- Degreaser-10
- Evaporator Treat-51
- Hold Solution-22
- Scale Remover-11
- Tank Cleaner-20
- 10932 reads
Get more with every purchase
Keep buying to get free reward points. For more details click at http://rxreward.com
