Rig Oil Field

Skin Care Paste, Waterless hand Cleaner 1 Kg

INDUSTRIAL HAND CLEANER for ink and paint industries  for cleaning of varieties of printing inks, chemicals and lubricants etc. This product base is Natural Orange solvent which help to  protect the skin dryness / cracks of the hands, As petrolieum based product damage skin and drains body oil from epidermal skin and also causes dermatitis / skin diseases.

Asia's #1 product 

Alias: 

Skin Degreaser

Active Matter: 
100%
Application: 

Also Ideal for personnel working in metal and chemical Industries, oil fields, ship maintenance, garrage and machine shops as well as in manufacture of Engines & Transmission etc.

Removes the toughest grease tar grime ink paints sealants adhesives and other difficult soils.

It is massaged on to the soiled / greased skin without the use of water. The skin should then either be rinsed with clean water or wiped thoroughly with towel / tissue paper.  it removes even the most stubborn ink, paint,  grease and grime thoroughly yet gently. 

Packing Size: 
1.00 KgPaste
Using Procedure: 

Normal 2-5 grams is sufficient to apply , but depends on degree of contamination and cleaning required . In hard cleaning repetition may require.

After application hand can wipe from tissue or towel or even hands are easily washable by natural tap water.

The effect of the cream after application  or wash not be sticky and after wash gives smooth soft soothing effect. This is a better substitute of petroleum products & caustic based detergent which drain the body oil . It removes even the most stubborn grease and grime thoroughly yet gently. Multi-purpose heavy duty cleaning agent.

 

 

Note: 

Avoid contact with wounded skin and Harmful , If ingested ,induce vomiting and seek medical attention

Super tough premium industrial waterless hand cleaner gel , uses orange / lemon  peel extract , effectively remove wet paint, printing inks, greases, Oil, Adhesives, grime, Carbon black, glue and several other to remove most stubborn Hand cleaner manufacturer and exporter from India , for Wholesaler and Trader  Greaseless, waterless hand cleaner. ; Fresh orange / lemon scent; Contains no petroleum distillates to dry out skin Hand Cleaner Gel is not flammable and will not burn Doesn't Contains pumice , its unique formulation provide heavy- duty cleaning & deep scrubbing action

 

 

Short Description: 
INDUSTRIAL HAND CLEANER white milky gel for ink and paint industries for cleaning of varieties of printing inks, chemicals and lubricants etc. This product base is natural which help to protect the skin dryness / cracks of the hands.

Skin Care Paste, Waterless hand Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Skin Care Paste, Waterless hand Cleaner at a competitive price from us. We have ready stock of Skin Care Paste, Waterless hand Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Gel Hand Cleaner

Demulsifier Premium

Oilfield Chemicals Demulsifiers - Demulsifier to successfully separate oil from water. Also suitable for lightest sweet crudes to the heaviest sour crudes.

Alias: 

Pasetreat 6410, Clarient P 6752, DEMTROL, Separate water in Oil Emusion, Dissolvant Clariant

Active Matter: 
90-93
Application: 

RXSOL DEMULSIFIER is  Water-In-Oil Demulsifiers, which can be used as stand-alone Demulsifiers to separate Formation Water from Crude Oil Emulsion. There are vast differences and Characteristics of Crude Oils produced in various Fields. Use and application Oil Soluble Demulsifier Testing & Selection is accomplished by standard Bottle Tests in Lab followed by Field Trial Tests. They are commonly used in the processing of crude oil for effectively separating formation water from emulsions in crude oil.

Demulsifier to successfully separate oil from water. Also suitable for lightest sweet crudes to the heaviest sour crudes.

Packing Size: 
210.00 Ltr.
Using Procedure: 

Dose recommendations have to be made on a case-by-case basis. The dosage of RXSOL DEMULSIFIER prescribed to break a particular emulsion varies from as little as 1 ltr per 20,000 Ltrs (50 ppm) of oil to as much as 1 Ltr per 10,000 ltrs (100 ppm) of oil. A few companies have even found that 20 ppm was more effective than the higher dosages, so we suggest adding the lower levels to your laboratory bench tests to verify the correct dosage for the specific application. Finding the most cost-effective dosage, as well as determining the best conditions of temperature, slow mixing, settling time, etc., is best done in the laboratory, using a sample of the actual oil or waste and a sample of Demulsifier.

Note: 

Futrue and Benefit :

Contains surface-active materials
Separates water from oil
Free from defilements
Excellent stability
Precise chemical composition
Easy to Handle.

Storage and Handling : 

RXSOL DEMULSIFIER shall be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling. The spillage can be handled with dry absorbent like sand, sawdust, etc. On ingestion / eye contact with the product, medical attention should be sought immediately.
 

Article News: 
Short Description: 
Can be use as a Separation of emulsified water from crude adsorbent, Sharp interface between crude oil and water.

Marine and Oil Field chemicals manufacturer and supplier. Demulsifer direcly indicates emulsion breaker into oil and water phase. This product is most commonly used in Oil field demulsification process. 

Demulsifier most commonly known as oil water separator in Oil field industries. 

Demulsifier best discounted price directly from manufacturer are available through email. As we have reagular supply of Demulsifier in Oil filed industries, so we are keeping ready stock of demulsifier at our all phyisical location of India and UAE.  Click here to get our physical loaction and franchise details   http://rxmarine.com/where-to-buy

DEMULSIFIER CHEMICALS FOR WET CRUDE TREATMENT OF THE FOLLOWING TYPES :

  1. Material to be used in (LUHAIS, BIN-OMAR and ARTAWI) field.
  2. Material should effective and workable for a period of (2 years) from the date of delivery.
  3. Manufacturers to state and guarantee that the specification should be unchanged and must be developed to give good results and to fill full the requirements of (SOC)
  4. In case of any deviation in (Winter or Summer seasons) manufacturers must compensate the balancing quantities.
  5. Manufacturers should send their representatives to follow the activity of materials during the period of contract.
  6. Specifications of out let oil must not exceed:50 ppm salt 0.2% water content
  7. Crude Oil Specification as follow:

 

Item         Option                                       Percent
1 API 32.4°
2 S.G 0.8633
3 Inlet Salt 45,000-60,000 ppm
4 W.C 7-12%
5 TDS WASH WATER 3000 ppm
6 TDS formation water 250,000 ppm
7 Oil Temp. Winter (20-30) C°

8

Oil Temp. Summer (50-60) C°
Viscosity in 21.1 C° 16.64 cSt
10 Viscosity in 37.8 C° 10.30 cSt
11 Viscosity in 50 C° 8.022 cSt
12 Viscosity in 60 C° 6.251 cSt
13 Sulfur Content wt% 1.7
14 H2S Dissolvedin crude oil ppm Nil
15 Wax content wt% 7.9
16 Carbon residue wt% 1.9
17 Pour Point C° C° -26
  • 8. dose of competition should be (25-50) ppm
  • 9. Added Material has no any side effects on the pipe line and exported oil and all other equipment.
  • 10. The bidding should be included supplying (20 drums) of the material to be tested in LUHAIS field and assessment (without depending any previous test) (without any cost), otherwise technical and commercial offers will be neglected.
  • 11. The test of samples make by field and finger print
  • 12.The origin of manufacturer flow improver material (America)
  • 13. Provide with bidding names of companies using the flow improver material and location.
  • 14. The material should be environment friendly type and clearly state the type of process and clarify the best method how to deal with it.
  • 15. The bidding should specify clearly the material life time in the (normal and up - normal ) working condition and the replacement or regeneration recommendation )
  • 16. Delivery period to be (30) days, CIP Basra (S.O.C warehouse). SUPPLYING OF THE QUANTITIES ACCORDING TO (SOC)
    REQUIREMENTS AND THE SCHEDULE OF DELIVERY TO BE AS FOLOWS:
  •  1500 Drums during 3 months
     1500 Drums during next 3 months
     1500 Drums during last 3 months
  • 17. Penalty Rate 20%.
     

Demulsifier bases can be used to treat light, medium and heavy crudes manufacturer, Exporter and supplier in India - Middle East, Oman, Canada. Popular Demulsifier supplier in Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Muscat Sohar Barka Oman, Canada, Kenya, Africa, Uganda, Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai Ennore, Kolkata Haldia Paradip 
 

Question : What is Difference Between Demulsifier and Reverse Demulsifier?
Answer :
Reverse Demulsifiers—-Break oil-in-water emulsions

Demulsifiers—-Break water-in-oil emulsions

Email us to get MSDS, Technical Bulletine of Demulsifier.  Also feel free to mail us to get customized and private labeling option of Demulsifier. 

Pioneer in specialty oilfield production chemicals to treat a wide variety of oil and gas production problems faced by  Oil Field Industries customers.

Methodology for Evalution of Demulsifier :

Step 1 :Treat 100ml of the emulsion with 40 mg/litre of Demulsifer, (using 1% w/v solution in xylene in 100 ml graduatd conical tube) and give 100 shakes of approximately 12 in stroke

Step 2 : Place treated emulsion in water bath maintained at 70 +1oC for a period of 15 minutes and allow it to settle for 5 minutes at 30+2oC. measure the quantity of clear water settled

Step 3 : Conduct a blank test with untrented emulsion under condition similar to treated emulsion

Step 4 : Substract the water seprator if any in blank test from treated sample and denote it as V. Similarly subtract the water separated from blank from total water present in emulsion and denote it Vo.

Report Efficiency Percentage as Follow : % Effiency =(V/ Vo) x 100

 

Demulsifiers Offspec Crude from Emulsion in Oil
Water Clarifiers Off Spec Re-Injection or Disposal Water
H2S Scavengers High H2S and Mercaptans
 
Corrosion Inhibitors High Internal Corrosion Rates
Scale Inhibitors Scale Deposition Downhole or in Process
Biocides Bacteria Fouling or Associated Corrosion
Oxygen Scavengers High Oxygen Content in Water
Wax Inhibitors Wax Formation Downhole or in Process
Asphaltene Inhibitors Asphaltene Formation Downhole or in Process
Pour Point Depressants High Pour Point Crude in Winter Conditions
Drag Reducers Pipeline Throughput Limitations
Defoamers Foaming in Process Separators

Emulsion Breaker to treat light, medium and heavy crude

Air Cooler Cleaning Chemical

Alias: 

Mite ACC, RXSOL 79101 ACC, Care Clean ACC, Air Cooler Cleaner Merichem, Cleaner 622, EAZY ACC, SEA SHIELD ACC 79101, Air System Cleaner, Air cooler Cleaner AC cleaner 25 Ltr

Application: 

During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dust and carbonaceous deposit, which will affect cooler efficiency and damage the system.

RXSOL-54-1048-020 ( www.rxmarine.com/safe-acid-descalex-liquid-20-ltr ) is a powerful dissolving agent of calcium carbonate. Therefore, it is better to use RXSOL-54-1048-020  to do circulating cleaning at an early stage before the scales build up and block the tube, or regular cleaning is recommended as well. It is impossible to do a circulating cleaning when the tube is completely blocked.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Dirt attached on air-side fins of air coolers are a mix of carbonaceous particles such as soot and oil mist of unburned fuel components. 
Carbonaceous particles can be removed by Alkaline Cleaners Part No. RXSOL-16-1040-025 ( www.rxmarine.com/alkaline-air-cooler-cleaner ) and oil mist can be removed by oil based cleaners. However, it is very difficult to remove the mix of these substances. If you use an alkaline cleaner, oil will repel the water based alkaline cleaner; if you use oil based cleaner, carbonaceous particles will get in the way and stop oil from being removed.

This cleaners designed to remove both carbonaceous and oil simultaneously. An effective cleaning method is to immerse one side to remove the loose stains first, and then immerse the other side. This method can efficiently remove dirt and prevent swollen dirt peeled from fins from blocking the spaces between fins.

Dirt in tubes of seawater side

White scales attached on the seawater side of air coolers of many vessels. We found that in most cases, the main component of the scales is calcium carbonate and there is also a small amount of calcium sulfate. Therefore in most cases, if you dissolve the calcium carbonate the scales will be removed.

However, if the amount of scales is large enough to block the tube, the cylindrical scale will usually have calcium carbonate on the outside (the side that is in contact with tube) and calcium sulfate in the center (part that seawater passes through). Calcium sulfate is easier to be formed when the temperature goes higher.

When the amount of scales increases, the contact area of scale and cleaner is very small and a longer time of dissolution is required. Calcium sulfate cannot be dissolved by an acid cleaner.

Note: 

FREE from ACID
Polymer based cleaner, which will result extra shinning and smooth feeling on surface.

Multiple action of RXSOL-16-0009-025 increases its popularity, And this product also can be use for DEGREASING and Carbon removal action.

Very popular and Effective cleaner for air coolers, scavenging air systems and turbo chargers of diesel engines, Coils of AHU, FCU, Air Conditioners (Indoor and Outdoor), Car Condenser and Radiator, Air Cooled Chillers, Air Cooled Condensers, Air Cooler Tube Bundle etc. 

Short Description: 
ACC9 AC coil cleaner is powerful solvent emulsion cleaner, easily dissolves soiled oil and grease deposit. Also helpful to clean all types of engine parts, turbo chargers of diesel engines. During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dus
Information: 

ACC9 is very effective to clean and dissolve oil, grease and carbon residues from machinery parts of air coolers, turbochargers and scavenging systems. We are keeping ready stock of materials at Mumbai, Surat, Gandhidham - Kandla Deendayal , Mundra, Manglore, Visakhapatnam, Chennai - Ennore, Kolkata - Haldia, Fujairah, Dubai - Sharjah. Proper cleaning of AIR COOLER  not only cooling efficiency can be improved but also Fire hazards can be minimised as build up of grease and oil residues are helpful to transmit fire from one point to others. Our continious work in chemicals field help us to add strong emulsifying agents in our Air cooler cleaning chemical which acts as penetrating agent as well as cleaner to  remove grease and mud part created with mixture of mineral oils, grease, carbon soot  from air coolers and turbocharger.

#AirCoolerCleaningChemicals
#AirCoolerDetergent
#AirCoolerCleaner_manufacturerSupplier

Air Cooler Cleaning Chemical manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Barka, Ghala, Muscat Oman, Kenya Africa. Get the best quality of Air Cooler Cleaning Chemical at a competitive price from us. We have ready stock of Air Cooler Cleaning Chemical in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

How to Clean Air Cooler?

Air Cooler Detergent Cleaner Formulated to clean remove heavy deposited oil, grease, and carbon and mud deposits from air coolers and scavenging systems. 3 Ltr of Concentrated Cleaner can cover heavily deposited contaminated cooler surface area. 

DOSE Air Cooler Cleaning  Chmeical Mixing Ration with Water : 1 Part Concentrate COOLER CLEANER with 3 PARTS FRESH WATER. 

Note : If condition of COOLER is heavily deposited / contaminated then repeat the injection process 2-3 times.

After cleaning of EMULSIFIED deposits, Rinse the system with FRESH WATER.
 

SPRAY METHOD by HAND SPRAY :
 

 

First of all STOP AC ENGINE, and Disconnect from POWER SUPPLY.

Then spray on all coil CONCENTRATE Air Cooler Cleaner, And after 1 Hours use PRESSURE Water Jet as per the requirement ti remove all greasy mess and loose particle. And flush the system through DRAIN VALVE. If necessory, repeat the same PROCESS to get satisfaction and optimum cleaning result.

 

Typical Soak Method

USE PLASTIC BATH TUB and dip all machine parts to remove HEAVY DEPOSITED carbon and oil grease. Wait for minimum 2 - 4 hrs then RINSE the parts by using PRESSURE WATER JET.

 

Note : Must read instruction of ENGINE MANUFACTURE manual.

Powerful AC coil cleaner

Corrosion Inhibitor

RXSOL-16-1047-210 corrosion Inhibitor is an organic, liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.
 

Alias: 

NALCO EC1304A, Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid. Acid Corrosion Inhibitor

Application: 

The addition of Acid corrosion Inhibitor RXSOL-16-1047-210,  inhibitors to  Acid solution provides maximum protection for equipment during:

  • a. The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equipment.
  • b. The removal of scale and deposits from equipment in refineries, utility companies,paper mills, chemical plants and other industries.

Acid corrosion Inhibitor RXSOL-16-1047-210 inhibitors meet the requirements of Military Specification Nos.MIL-I-17433 and MIL-C-17434.

Packing Size: 
210.00 Ltr.
Using Procedure: 

For each 1000 gallons of either 3% or 5 % by weight* hydrochloric acid solution, not less than the following amount of Acid corrosion Inhibitor RXSOL-16-1047-025 should be used:

1 gallon for a cleaning temperature of 150° Fahrenheit.
2 gallons for a cleaning temperature of 175° Fahrenheit.
3 gallons for a cleaning temperature of 200° Fahrenheit.

* A 5% by weight hydrochloric acid solution contains 14.1% by volume of 20° hydrochloric acid.

The exceptional strength and heat stability of Acid corrosion Inhibitor RXSOL-16-1047-210 give the user a considerable safety factor in relation to temperature, acid strength, and time. Acid corrosion Inhibitor RXSOL-16-1047-210 may be added to either the diluted or concentrated hydrochloric acid. In either case, Acid corrosion Inhibitor RXSOL-16-1047-210 should be thoroughly mixed with the acid by stirring or agitation.

The hydrochloric acid solution inhibited with Acid corrosion Inhibitor RXSOL-16-1047-210 is best circulated through the equipment to be cleaned. When circulation cannot be accomplished, the equipment should be filled with the inhibited acid and allowed to react for sufficient time to remove the objectionable deposits. To estimate the proper acid concentration and cleaning time, samples of the deposits to be removed can be tested in the laboratory prior to cleaning. If heating of the equipment to be cleaned or acid solution is desired to speed the cleaning action, it should be done prior to the start of the cleaning operation.

Note: 

Storage and Disposal

Acid corrosion Inhibitor RXSOL-16-1047-210 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL-16-1047-210 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL-16-1047-210  be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

Disposal information for Acid corrosion Inhibitor RXSOL-16-1047-210 is given on the Material Safety Data Sheet for each product.The industrial cleaning bath is acidic and contains hydrochloric acid and organic Acid corrosion Inhibitor RXSOL-16-1047-210  components. Waste treatment , neutralization is required. The industrial cleaning bath and sludge can contain ingredients other than those in the chemical as supplied and analysis of the solution and/or sludge is required before waste treatment and disposal.

Short Description: 
Corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.

Corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid on iron and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.

NALCO EC1304A, Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid. Acid Corrosion Inhibitor

Corrosion Inhibitor manufacturer and supplier in Mumbai, Gandhidham, Vizag - Visakhapatnam, Chennai, Kolkata, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat - Oman.

38249022

Cationic corrosion inhibitor designed to inhibit the attack of hydrochloric acid

Antiscalant RXSOL ORG EV

Antiscalant RXSOL ORG EV  is a high performance liquid product for the control of alkaline scaling (calcium carbonate and magnesium hydroxide) in all types of seawater distillation plants. Antiscalant ORG EV is an aqueous solution of a synthetic polymer based on hydrolysed maleic anhydride.Used alone or in conjunction with a sponge ball cleaning system its effectiveness has been demonstrated in distillation plants operating with top brine temperatures up to 120 ºC.

Alias: 

BELGARD EV 2030, Alkaline Antiscalant, Desalination Evaporators Anti-Scale Treatment Chemicals

Active Matter: 
90
Application: 

Antiscalant RXSOL ORG EV  can be used in all types of distillation plant but is particularly suitable for use in multi-stage flash plants.
 

Packing Size: 
240.00 Kg.Liq
Using Procedure: 

Antiscalant RXSOL ORG EV is an aqueous solution of an organic acid and as such is corrosive in its concentrated form. Corrosion resistant dosing equipment must be used. Examples of suitable materials are 316L stainless steel and PVC or other plastic materials. Recommended injection points are either into the seawater make-up line after any external de-aeration and decarbonation equipment or into the recycle brine stream at a suitable point after the blowdown and typically into the discharge of the recycle brine pump

Antiscalant RXSOL ORG EV  is miscible with water in all proportions. It may be applied as the neat product, or as a solution in distillate and should be dosed continuously, and proportionately to the seawater make-up flow, to maintain the recommended dose level.

The dose level required will depend on a number of factors, including the quality of the seawater feed, TBT, recycle brine concentration factor, the type of distillation plant and frequency of application of the sponge ball cleaning system. Typical dose levels, when used in conjunction with a sponge ball cleaning system, are 0.8 to 1.2 mg/l at TBT 90 ºC and 2.0 to 3.0 mg/l at TBT 110 ºC. Detailed recommendations for any plant will be made on request

.

Note: 

Thermal Stability: 
Thermogravimetric analysis and differential scanning calorimetry have shown that Antiscalant RXSOL ORG EV is stable up to a temperature of 300 oC.

Chemical Reactivity: 
Antiscalant RXSOL ORG EV  is not affected by chlorine or other oxidising biocides under normal conditions of use. It is readily broken down by strong oxidising

Packing : Net weight 240 kg Gross weight 248.5 kg. Antiscalant RXSOL ORG EV is also available in Bulk packing in IBC Tank as 1200 Kgs and small packing as 25 Kgs.

Handling : Avoid inhalation of vapors/spray and contact with skin and eyes. Avoid eating, drinking and smoking when using the product. Observe good chemical hygiene practices.
 

Storage :  Protect against physical damage and/or friction. Keep in original container. Store in tightly closed original container in a dry and cool place. Store away from: Alkalis. Reducing Agents. Do NOT use container made of: Carbon steel. Store away from strong oxidising agents.

Shelf Life : 24 Month from date of Mnaufacturing

Short Description: 
Antiscalant RXSOL ORG EV is a high performance liquid product for the control of alkaline scaling calcium carbonate and magnesium hydroxide in all types of seawater distillation plants

#EvaporatorAntiscalant
#Antiscalant_SeawaterDistillationPlants
#AntiscalantRXSOLORGEV_supplier
#Antiscalant_Yemen
#antiscalant_UAEdubai
#ANTISCALANT_muscatOMAN
#AntiscalantORGEV2030_supplier
#ANTISCALANT_manufacturer
#antiscalant_DUBAI

Antiscalant RXSOL ORG EV manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Antiscalant RXSOL ORG EV at a competitive price from us. We have ready stock of Antiscalant RXSOL ORG EV in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Evaporator Antiscalant

Coolant Green RXSOL G 93-94

DIESEL ENGINE WATER TREATMENT  Anticorrosive coolant SUITABLE FOR ALUMINIUM, ALLOYS AND YELLOW METALS

Alias: 

Glayscor G93-94, Inhibitor for Aluminium Alloys AND YELLOW METALS, COOLANT, VOLVOPENTA GREEN, Glysacorr G93, Anticorrosive, Green Glycol

Active Matter: 
93-98
Application: 

At concentration of 10% by volume, Coolant Green RXSOL G 93-94 affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals.

Packing Size: 
25.00 Ltr.
Using Procedure: 

The coolant should be prepared with water that is clean but not too hard. The following types of water are unsuitable: sea water,mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the following limits :
Water hardness   : 0 -    100 ppm
Chloride contents: max 100 ppm
Sulphate contents: max 100 ppm
The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water.

Note: 

VARIOUS GRADE OF COOLANT

Antifreeze Coolant Liquid Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and RXSOL-16-4020-020

 

Coolant 20 Ltrs inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4004-020

 

Coolant 25 Ltrs Useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. RXSOL-40-4004-025

 

Coolant 210 Ltrs inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4004-210

 

Coolant Extended Life RXSOL ELC Especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. RXSOL-40-4016-025

 

Coolant Green RXSOL G 93-94 Inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4021-025

 

Coolant Extended Life RXSOL ELC Suitable for high speed coolant pump, Especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. RXSOL-16-4016-210

 

Coolant 10 Ltrs inhibitor concentrate chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4004-010

 

Coolant Green RXSOL G 93-94 inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4021-020

 

Coolant Green RXSOL G 93-94 inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4021-210

 

Coolant Premix Redcool premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to i RXSOL-40-4043-025

 

Radiator Coolant 20% Conc. Suitable to add to the cooling water of internal combustion engines for excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks, ships and lokomotives. RXSOL-40-4045-025

 

Radiator Coolant 20% Conc. Suitable to add to the cooling water of internal combustion engines for excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks, ships and lokomotives. RXSOL-40-4045-210

Short Description: 
Inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and

Coolant Green RXSOL G 93-94 Green Glycol Manufacturer, exporter and supplier in India Mumbai, Gandhidham, Surat Hazira, Vizag Visakhapatnam, Chennai Ennore, Kolkata Haldia, Paradip, UAE Middle East Fujairah, Sharjah, Dubai, Ajman, Muscat Sohar Barka, Oman, Canada, Mombasa, Kenya, Uganda Africa, Sudan, Yemen

Green Glycol

Heavy Duty Skin Cleaner

Heavy Duty Formula to removes even the Most Stubborn Soils. Major components of this products are Natural Vegetable Scrubber which facilitates and helps for Quickly  Soil Removal.

Packing Size: 
5.00 Ltr.
Using Procedure: 

 

PRODUCT DIRECTIONS
Equipment to use: Proper Hand Soap Dispenser
Directions for use: Wet hands thoroughly before applying desired amount of product. Rub hands together to produce a lather, then rinse thoroughly with potable water.
 
Short Description: 
Heavy Duty Formula to removes even the Most Stubborn Soils. Major components of this products are Natural Vegetable Scrubber which facilitates and helps for Quickly Soil Removal.

Heavy Duty Skin Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Heavy Duty Skin Cleaner at a competitive price from us. We have ready stock of Heavy Duty Skin Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Soil Removal Heavy Duty Formula

TPOL 20 Ltr BUCKET

RXSOL-12-T-300-20 is a multi - prupose heavy duty cleaing soap solution used as a common dirt remover in residential, commercial and industrial cleaning processes.

Uses and Benefit A surfactant (Surface Active Agent).
Advantages:
1.   Very effective as a long chain cleaning compound.
2.   It will form gels, emulsify oil and lower the surface tension of water.  A lower surface tension allows the soap to come in contact with greater surface area than with water alone.

Alias: 

Teepol

Application: 

Universal cleaner for home, institutes, plant and machinery. compatible with all type of surfaces.
 

Packing Size: 
20.00 Ltr.
Note: 

RXSOL-12-T-300-20 has a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule thus having a cleaning power better than ordinary soap.

Charateristic: ( Why RXSOL-12-T-300, is better than soap)-?
1)The “ORGANIC SYNDET” are superior to soaps  because  they donot form  insoluble salts Ca+²,Mg+², & Fe+³,ions as soaps do. For e.g :- 2RCOO¯Na+  +Mgso4  Ù(RCOO)2 Mg+²  + Na2So4 Soaps    Insoluble 2R  So3¯Na+  + MgSo4[ R So3¯]2Mg+² +Na2So4 ORGANIC SYNDET SOLUBLEHence ORGANIC SYNDET ,can be used in either Soft Water or Hard Water,While ordinary soaps are precipitated in Hard Water and go waste.
2)RXSOL-12-T-300-20, have a long non-polar hydrocarbon chain and a highly polar group at the end of the molecule.Thus they have CLEANING POWER , as better than ORDINARY SOAP. 

1.Ordinary Soaps were not readily BIODEGRADABLE, In other words, they
2.were not broken down by BACTERIA in the  SEWAGE TREATMENT PLANTS. They caused  water POLLUTION  while RXSOL-12-T-300-20, are BIODEGRADABLE , so there is no question of water pollution.

Safety Accessories: 
Short Description: 
Universal cleaner for plant and machinery. compatible with all type of surfaces.

TPOL manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of TPOL at a competitive price from us. We have ready stock of TPOL in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Valuable marine chemical Products :



For fuel processing
Biocide for fuels and lubricants.
Organic combustion improver.
Combustion catalyst and ash modifier.
Dual Purpose Plus. An additive for improving the combustion process and gas removal.
Fuelcare. Additive for improving fuel preparation before combustion.
Separator for water-fuel emulsion.
Soot Remover. Dry soot and scale remover.
Soot Remover Liquid. Soot remover.
Valvecare. An additive for improving the combustion process and gas removal.
 
For boiler water treatment
Alkalinity Control. : Concentrated liquid alkali for boiler water treatment.
Conditioner for water treatment in boilers with pressures above 30 bar.
Boiler Coagulant.:  Conditioning additive to prevent deposits in boiler water.
Sulphite catalyst liquid for rapid oxygen cleaning in boiler systems.
Combitreat : Universal conditioner for boiler water of low pressure boilers (up to 20 bar).
Condensate Control. : Liquid additive for boiler systems to reduce corrosion in condensate.
Hardness Control. : Phosphate additive for boiler water.
RXSOL BWT LIQUID PLUS. : Universal liquid conditioner for boiler water in boilers with pressures up to 30 bar.
Oxygen Control. Hydrazine solution for oxygen cleaning of boilers.
Oxygen Scavenger Plus. Solution for removing oxygen from boiler water.
 
For cooling water treatment
RXSOL Boiler Water Sludge Conditoner 25 Ltr. Liquid corrosion inhibitor for the cooling system.
Corrosion inhibitor for cooling water.
Biocide to prevent the development and growth of microorganisms in water cooling systems and lubrication systems.
Liquid corrosion inhibitor for cooling water.
For the treatment of evaporators
Treatment fluid for evaporators.
 
For sea water treatment
Liquid anti-fouling additive for seawater systems.
For the treatment of drinking water systems
Potable Water Stab. Monitoring the formation of scale and corrosion in hot water systems and other single-flow water systems.

Marine chemicals for cleaning and maintenance of equipment and premises
ACC Plus. : Non-toxic cleaner for air coolers and turbochargers.
Air Cooler Cleaner. : Purifier for air coolers and turbochargers in service.
ALKAATUFF: General purpose water-based degreaser.
A powerful general purpose alkaline cleaner.
Bilgewater Flocculant. : Product for the treatment of oily bilge water.
Carbon Remover. : Powerful cleaner for removing stubborn carbon deposits.
Low toxicity solvent cleaner for removing stubborn carbon deposits.
Carpet Cleaner. : Dirt cleaner for all types of carpets and carpets.
Cleanbreak. : Self-separating cleaner for engine rooms and cargo tanks.
General purpose degreaser and tank cleaner.
Commissioning Cleaner. : Cleaner for new boilers and cooling systems.
Defoamer Concentrate. : Anti-foam concentrate.
Powdered acid for removing scale and rust.
Descaling Chemical. : Liquid acid for removing scale and rust.
Marine chemicals for cleaning separator discs.
 
Electrical Cleaner. Electrical equipment cleaner.
 
Foam Agent. Foam additive to improve the efficiency of cleaning with chemicals.
Cleaner for public and residential premises.
High Pressure Wash. Concentrated detergent for washing machines.
Rust Stain Remover. Rust remover.
Rust Stain Remover HD. Means for removing rust and plaque from metal.
 
Natural Handcleaner. Hand cleaner.
Fast-acting penetrating oil product.
Refrigeration chamber cleaner.
Teak Renewer. A cleaner and polish for wooden decks.
Water-based cleaner for cleaning in ultrasonic baths.
General purpose detergent.
Zinc Coat Conditioner. Zinc coatings cleaner.

For cleaning holds
Alkaline Liquid. Powerful alkaline tank cleaner.
Alkaline Safety Liquid. Non-caustic alkaline cleaner.
Enviro Degreaser. Degreaser and tank cleaner.
Mud & Silt Remover. Dirt separator for ballast tanks and water systems.
RXSOL NEW org: Double bottom tank cleaner.
RXSOL NEW org: Tank cleaner and degreaser.
 
To combat oil spills

Oil Spill Dispersant . Dispersant for spilled oil products.
Oil Spill Dispersant. Dispersant for combating oil spills.
Oil Spill Dispersant. A product for dispersing oil products spilled at sea or in a port.

Marine biological products
Biological stimulant for waste and faecal installations and systems.
Odor remover
Biological units for urinals
Biological toilet cleaner.
Cleaner of outlets and devices for grinding waste

Visit us : http://rxmarine.com/where-to-buy
Email : mail@rxmarine.com

Teepol

BioSol Cleaner

Very effective cleaner for sticky PU, Gasious,Oily and Greasy mess, Fully active cleaner specially formulated  for the removal of  tuff oily stains residues, with out the need for Scrubbing or Brushing  which can cause mechanical damages to surface and result in poor performance. Field test have shown that this is very gentle with personnel and on metallic colour surface. Should always be used at full strength to obtain maximum benefits.

Alias: 

Bio Solv, SW-3i degreasing fluid industrial strength (trade name Ozzy juice), TOLUSOLV 10, GARDOFILM THINNER 51, XYLOSON 50, SPRAYLAT REDUCER 2100, POWER CLENER

Application: 
  • Unique chemical formulation for cleaning of  graffiti from smooth and rough surfaces
  • Non- toxic.
  • Extends time between cleans.
  • Safe to handle.
  • Effective removal of Heavy DEPOSITS.
  • Can be applied by all normal methods.
  • Formulated to be very cost effective.
  • Does not contain chlorinated hydrocarbons.
  • Can be used on all metals & most painted surfaces.
  • Environmentally friendly.
  • Non-Corrosive.
  • 100% Active.
  • Dries Completely.
  • Does not require special feeding equipment for safe application.
  • Cleans and flushes painting instrument like spray guns, paint lines, mixing tanks, and general purpose paint jobs
  • Removes and cleans wax for surface preparation for paint, glue, and assembly applications
  • very effective to remove   sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass
  • Cleans and degreases a variety of parts, tools, and equipment
  • Removes soot, grease, oil, grime, and diesel fuel
  • Handles tough automotive and transportation cleaning jobs
  • Cleans toner, copier equipment, and machinery including printing presses
  • Clean heavy duty oily and tar deposits
  • Flushes and cleans polyesters, vinyl ester, and epoxy lines
  • Removes polyurethanes, varnishes, enamels, and UV curable coatings
  • Cleans and prepares material surfaces such as metals
Packing Size: 
25.00 Ltr.
Using Procedure: 

Cleans, degreases and disperse heavy grease and oil build up on surfaces and hard to reach areas. Great for engines overhauling, heavy machinery, industrial equipment maintenance and mechanical parts cleaning.

Depends on usage this product  is  designed  into two types ::: 

  • RXSOL-20-2019-025 Concentrate    Heavy duty industrial cleaning job - not suitable for painted or coated surfaces.
  • RXSOL-20-2019-025 Tech                Medium duty industrial cleaning job - suitable for all surfaces.

Suitable for fast and effective cleaning jobs on huge areas with very minimal scrubbing activity and instant residue removal.

Widely applicable at airports and hangars for its non-volatile, non-corrosive and bio-degradable.

Easy and safe to use for electrical and electronic small sensitive components with hard to reach area. Solutions are non-hazardous and non-abrasive

Machine maintenance and overhauling, tools restoration.

Note: 

 

  • Cleans and flushes paint spray guns, paint lines, mixing tanks, and general purpose paint jobs
  • Removes graffiti from smooth and rough surfaces
  • Removes and cleans wax for surface preparation for paint, glue, and assembly applications
  • Removes vinyl graphics from boats, signs, trucks, and glass
  • Cleans and degreases a variety of parts, tools, and equipment
  • Removes soot, grease, oil, grime, and diesel fuel
  • Handles tough automotive and transportation cleaning jobs
  • Cleans and removes adhesive caulking and bedding compounds
  • Cleans glue residues, resin, and hardener
  • Cleans toner, copier equipment, and machinery including printing presses
  • Removes tar and sap
  • Flushes and cleans polyesters, vinyl ester, and epoxy lines
  • Removes polyurethanes, varnishes, enamels, and UV curable coatings
  • Cleans and prepares material surfaces such as metals
Short Description: 
Very effective cleaner for sticky Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues, with out the need for Scrubbing or Brushing which can cause mechanical damages to surface and result in poor

BioSol Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of BioSol Cleaner at a competitive price from us. We have ready stock of BioSol Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Water Soluble Degreaser

Spotting Fluid Stuck Breaker

RXSOL Spotting Fluid Stuck Breaker is environmentally friendly highly effective stuck Pipe spotting fluid for oil and Water Based muds. It is liquid blends of surfactant and lubricant, emulsifiers and Filter cake cracking agents of varying chemical nature formulated to serve as water in oil emulsifier and oil wetting agents and can be weighed as per requirement

Alias: 

SPOTTING FLUID Non Weighted STUCK BREAKER Non Weighted PIPE FREE Non Weighted

Active Matter: 
93-95
Application: 

RXSOL Spotting Fluid Stuck Breaker  used to free stuck pipe which has downhole problem frequently encountered in drilling operations.

Packing Size: 
210.00 Ltr.
Using Procedure: 

RXSOL Spotting Fluid Stuck Breaker  is typical Recommended Treatment to Prepare spotting fluid is 1-1.5 Gal/bbl of Spotting fluid required. The material can be diluted by adding Diesel.

Note: 

Advantages:

  • In case of stuck pipe problem, it allows quick and effective operation
  • Can be used with Diesel oil, Mineral Oil, Crude and Oil Base muds
  • It is compatible with fresh and salt water Drilling Fluids and can be added in active mud system without adversely effecting other properties
  • Thermally Stable
  • Improves Lubricity

Packaging:

RXSOL Spotting Fluid Stuck Breaker is packed in 210Liter  drums. Private Labeling and customized packaging is also available on request.

Safety and Handling:

RXSOL Spotting Fluid Stuck Breakermust be handled as a Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.

Short Description: 
RXSOL Spotting Fluid Stuck Breaker is environmentally friendly highly effective stuck Pipe spotting fluid for oil and Water Based muds. It is liquid blends of surfactant and lubricant,

Spotting Fluid Stuck Breaker manufacturer and supplier in India, UAE, Oman, Canada - Mumbai., Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Muscat - Oman, Canada BC

STUCK BREAKER

stock-clearance.png