Chembreak Emulsion Sludge Breaker

SKU: RXSOL-22-2006-025

Specialized to break emulsion or slop OIL and Water, RXSOL-20-2006-020  has the unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker "C" cleaners.

Alias: 

Ameroid OWS, Breaker/WWT, Chembreak, Careclean Quick Spilt, Desludger Chemical, Emulsion Breaker, Reverse Emulsion Breaker, Chembreak, Sludge Breaker, Aqualife CO 4500 MWS-C

Active Matter: 
85 - 88 %
Application: 

Ideally suited for slop tanks. Also recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. Low toxicity, non - corrosive. Highly effective, economical solvent cleaner.

Packing Size: 
25.00 Ltr.
Image: 
Using Procedure: 

For light contamination dilute with water in the ratio 1:20 . For medium contamination dilute with a petrosolvent. And for heavy contamination concentrated RXSOL-20-2006-025  is suggested.

Note: 

For Engine Room & Cargo Tank Cleaner

Product Description:- RXSOL-20-2006-025 is an all purpose degreaser emulsifiers, It is an excellent blend of powerful solvent base and emulsifying inorganic products .Specially designed  for engine room and cargo  tank cleaning .Main feature of RXSOL-20-2006-025 is, it finally dissociate slop emulsion  to separate oil and water. This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .

Dosage:- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL CB 2006 is suggested to use.

Procedure of use :- RXSOL-20-2006-025 is  recommended for local cleaning & degreasing of engine rooms, bilges & tank  tops. It may be applied by brush, spray, immersion, soaking, or  any  other  conventional  means.RXSOL-20-2006-025 is used  neat. Allow a residence time of at least 20- 45 minutes where  possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed  to separate  in a holding tank for atleast 3-5 hours before passing through an oily water separator.

Short Description: 
Unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker "C" cleaners.

Chembreak Emulsion Sludge Breaker manufacturer and supplier in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Gangavaram, Ennore, Haldia, Paradip, Fujairah, Abudhabi, Sharjah, Dubai, GULF UAE, Ruwi, Barka, Muscat Oman, Yemen, Sudan, Nairobi Kenya

Sludge Oil Water Quick Separator

Get more with every purchase

Keep buying to get free reward points. For more details click at http://rxreward.com

 

stock-clearance.png