ALKAATUFF high foam application and cleaning method and manual

ALKAATUFF High foam using procedure and cleaning method : 

1st Step Cleaning of extra and excess loose particle::: 

Before applying  ALKAATUFF high foam on hold surface, Makes sure extra loose cargo particle should be removed manually or Air blown method. Then cleaning procedure can be followed either by high foam machine or Manual. 

2nd step is for Mixing and dilution of ALKAATUFF:::

If cleaning step is with HP machine ( High Pressure ), Then mix concentrated ALKAATUFF high foam with fresh water, it can be diluted 1 Ltrs ALKAATUFF High foam with 4 to 5 Ltrs Fresh water.  

If cleaning step followed by hand spray, Then apply aquaatuff high foam neat on the surface. Approx  1 ltr covers 10 to 12 square meter. 

3rd Step final procedure::: 

Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80 - 90 degree. Rinsing procedure can be repeated 1 to 3 times if required for Cargo Tank and Cargo Hold Cleaning.

Aquaatuff high foam one of largest supplier in Mumbai ( Stock Point ), Dharamtar, JNPT - Nhava Seva, Manglore, Goa, Mundra, Kandla, Sikka, Gandhidham ( Stock Point ), Chennai, Ennore ( Stock Point ) , Vizag - Visakhapatnam ( Stock POINT ), Gangavaram, Kakinada, Kolkata ( Stock Point ) - Haldia, Paradip, Fujairah ( Stock Point ), Dubai, Sharjah...
More detailsabout product, you may follow this link - http://rxmarine.com/Alkaa-Tuff-High-Foam-conc-alkaline-ship-hold-cleaning-marine-detergent-chemical-manufacturer-supplier-exporter

Also refer our other valuable product - Coal Remover, Cement Remover, Lime remover, Slip Coat - Hold Block and many more..