Coal remover may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime. Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand. In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise, Coal Remover can be used undiluted especially when the deposition is heavy and hard spots persist.
Cleaning Procedure
Conventional cleaning methods such as a brush, hard sponge, thick and hard broom and /or a mop can be used on heavy-duty and hard stain deposits. Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of Coal Remover is sufficient to cover a surface area of 8–10 square meters.
NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discolouration is gone.
A water-based heavy duty alkaline Coal cleaner is helpful for removal of stains of coal. Also contains a specialized blend of synthetic. surfactants The cleaning should take place as soon as the discharge is complete to maximize effectiveness.
Feel free to share your furhter querry thorugh email : mail@rxmarine.com
Coal Remover Stock Point : Mumbai. Kandla, Mundra, Chennai Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Dhamra, Paradip, Muscat, Fujairah UAE