Sewage Chemicals Treatment-40

Hydrogen Peroxide 6% Solution

Hydrogen peroxide (H2O2) is the only germicidal agent composed only of water and oxygen. Like ozone, it kills disease organisms by oxidation! For this reason, Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.

Alias: 

Hydrogen Peroxide, Mild Disinfectant and cleaning agent

Active Matter: 
6%
Application: 

Application : Adults the elderly and children : Apply the solution directly with a PAD of cotton wool required.

Packing Size: 
500.00 Bottle
Using Procedure: 

Active Ingredient : Hydrogen Peroxide 6%

Note: 

1. Cuts and infections

Soak any infections or cuts in 3% for five to ten minutes several times a day. Even gangrene that would not heal with any medicine has been healed by soaking in Hydrogen peroxide. Put half a bottle of hydrogen peroxide in your bath to help rid boils, fungus or other skin infections.

2. Rejuvenating Detoxifying Bath

Use about 2 quarts 3% Hydrogen peroxide to a tub of warm water. Soak at least 1/2 hour, adding hot water as needed to maintain a comfortable water temperature.

3. Foot Fungus

To cure a foot fungus, simply spray a 50/50 mixture of Hydrogen peroxide and water on them (especially the toes) every night and let dry.

4. Bird Mites Infections

Patients infected by tiny mites report that hydrogen peroxide effectively kills the mites on their skins. They spray it on their skin a couple of times (with a few minutes in between the applications) with amazing results.

5. Sinus Infections

A tablespoon of 3% Hydrogen peroxide added to 1 cup of non-chlorinated water can be used as a nasal spray. Depending on the degree of sinus involvement, one will have to adjust the amount of peroxide used.

6. Wound Care

3% H2O2 is used medically for cleaning wounds, removing dead tissue, and as an oral debriding agent. Peroxide stops slow (small vessel) wound bleeding/oozing, as well.

Some sources recommend soaking wounds for five to ten minutes several times a day. However, washing and rinsing action is sufficient. You shouldn’t leave the solution on open tissue for extended periods of time as, like many oxidative antiseptics, Hydrogen peroxide causes mild damage to tissue in open wounds. Therefore it is important to use with caution.

Personal Care

7. Mouthwash

Many people don’t realize that hydrogen peroxide makes a very effective and inexpensive mouthwash. Take one capful (the little white cap that comes with the bottle) and hold in your mouth for 10 minutes daily, then spit it out. You will not have canker sores and your teeth will be whiter. Use 3% H2O2 – add a dash of liquid chlorophyll for flavoring if desired.

8. Toothpaste

Use baking soda and add enough 3% H202 to make a paste.

9. Toothbrush

Or, just dip your brush in 3% H202 and brush. Soak your toothbrush in Hydrogen peroxide to keep them free of germs.

10. Tooth Ache

Hydrogen peroxide is not a pain killer; however, as an anti-viral, antibacterial and anti-fungal agent, it is effective at treating the pathogen that is causing the infection. The following is from my own personal experience: My dentist wanted to give me a root canal some time ago as one tooth was inflamed and, in her opinion, would die. I felt some discomfort but told her that I would give it chance to heal. I rinsed with hydrogen peroxide (several times a day) as well ascoconut oil (once a day). The discomfort went away and I have had no further problems with the tooth.

If you have a terrible toothache and cannot get to a dentist right away, put a capful of 3% Hydrogen peroxide into your mouth and hold it for 10 minutes several times a day. The pain will lessen greatly.

11. Tooth Whitening

Having used 3% Hydrogen peroxide as a mouth wash for sometime ago, I am thrilled to note that my teeth have been beautifully and effortlessly whitened. I used to pay so much for professional whitening, those silly strips and uncomfortable trays. Live and learn.

12. Douche

Add 2 capfuls of 3% Hydrogen peroxide in warm distilled water once to twice a week to remove even chronic yeast infections.

13. Colonic or Enema

For a colonic, add 1 cup (8 ozs.) 3% H202 to 5 gallons warm water. (Do not exceed this amount) For an enema, add 1 tablespoon of 3% H202 to a quart of warm distilled water.

14. Hair Lightening

Peroxide is a bleaching agent and is used for lightened hair. Dilute 3% Hydrogen peroxide with water (50 / 50) and spray the solution on your wet hair after a shower and comb it through. You will not have the peroxide burnt blonde hair like the hair dye packages, but more natural highlights if your hair is a light brown, faddish, or dirty blonde. It also lightens gradually so it’s not a drastic change.

15. Contact Lenses

Hydrogen peroxide is used as a disinfectant in CIBA Vision’s Clear Care no rub contact lens cleaning solution, due to its ability to break down the proteins that build up on the lense from the eye’s immune response, resulting in increased comfort for those with sensitive eyes.

Sanitizing / Disinfectant / Cleaning

16. In the Dishwasher

To disinfect your dishwasher, add 2 oz. of 3% Hydrogen peroxide to your regular washing formula.

17. Kitchen/Household surfaces

Clean your counters and table tops with hydrogen peroxide to kill germs and leave a fresh smell. Simply put a little on your dishrag when you wipe, or spray it on the counters.

Fill a spray bottle with a 50/50 mixture of 3% Hydrogen peroxide and water and keep it in every bathroom to disinfect without harming your septic system like bleach or most other disinfectants will. After rinsing off your wooden cutting board, pour or spray hydrogen peroxide (and then vinegar) on it to kill salmonella and other bacteria.

Keep a spray bottle of 3% (straight) to disinfect the interior of the refrigerator and kids’ school lunch boxes. You can also use hydrogen peroxide to clean glass and mirrors with no smearing. Use it in the bathroom to sanitize the counters, toilets, floors, etc.

Directions: It is best to use two spray bottles rather than mixing the solutions together. Put straight vinegar in one and straight Hydrogen peroxide in the other spray bottle. When you want to sanitize a surface (cutting board, counters, sink, cages, toys, toilets, floors, etc.) spray one mixture on the surface, then the other. When they mix, for a brief time the chemical action of the two make a very powerful sanitizer. You can rinse off the surface afterwards. This applies for kitchen surfaces as well as vegetable and food decontamination.

18. Humidifiers/Steamers

To clear the air, use 1 pint 3% hydrogen peroxide to 1 gallon of water in a humidifier or steamer.

19. Washing/Laundry

You can also add a cup of hydrogen peroxide instead of bleach to a load of whites in your laundry to whiten them. If there is blood on clothing, pour directly on the soiled spot. Let it sit for a minute, then rub it and rinse with cold water. Repeat if necessary.

Peroxide is a perfect alternate solution to keep those clothes white. Also, when chlorinating clothes, they tend to wear out faster – peroxide won’t do that.

20. Laundry / Stain Removing

3% Hydrogen peroxide is an effective stain remove if it is used fairly soon after a spill – although blood stains as old as 2 days have been successfully lifted with Hydrogen Peroxide. If a little peroxide is poured onto the stain it will bubble up in the area of the blood, due to a reaction with catalase. After a few minutes the excess liquid can be wiped up with a cloth or paper towel and the stain will be gone.

3% H2O2 must be applied to clothing before blood stains can be accidentally “set” with heated water. Cold water and soap are then used to remove the peroxide treated blood.

Please note: Hydrogen peroxide will bleach or discolor many fabrics.

Food Preparation

21. Food preparation/decontamination

Combination of vinegar and hydrogen peroxide make a cheap, effective and non-toxic disinfectant agent and is said to be more effective at killing pathogens than bleach. As it is non-toxic, you can use it to cleanse cooking and food preparation areas (as well as fruits and vegetables – see #24). In tests run at Virginia Polytechnic Institute and State University, pairing Vinegar and Hydrogen Peroxide mists, kills virtually all Salmonella, Shigella, or E. coli bacteria on heavily contaminated food and surfaces.

22. Vegetable Soak

Use as a vegetable wash or soak to kill bacteria and neutralize chemicals. Add 1/4 cup 3% H2O2 to a full sink of cold water. Soak light skinned (light lettuce) 20 minutes, thicker skinned (like cucumbers) 30 minutes. Drain, dry and refrigerate. Prolongs freshness.

If time is a problem, spray vegetables (and fruits) with a solution of 3%. Let stand for a few minutes, rinse and dry.

23. Meat Sanitizing

You can also use it to rinse off your meat before cooking.

24. Leftover tossed salad

To help keep leftover salads, spray with a solution of 1/2 cup water and 1 Tbsp. 5%. Drain, cover and refrigerate.

25. Marinade

Place meat, fish or poultry in a casserole (avoid using aluminium pans). Cover with a dilute solution of equal parts of water and 3% H202. Place loosely covered in refrigerator for 1/2 hour. Rinse and cook.

26. Sprouting Seeds

Add 1 ounce 3% Hydrogen peroxide to 1 pint of water and soak the seeds overnight. Add the same amount of hydrogen peroxide each time you rinse the seeds.

Grades of Hydrogen Peroxide

A) 3.5% Pharmaceutical Grade: This is the grade sold at your local drugstore or supermarket. This product is not recommended for internal use. It contains an assortment of stabilizers which shouldn’t be ingested. Various stabilizers include: acetanilide, phenol, sodium stanate and tertrasodium phosphate.

B) 6% Beautician Grade: This is used in beauty shops to color hair and is not recommended for internal use.

C) 30% Reagent Grade: This is used for various scientific experimentation and also contains stabilizers. It is also not for internal use.

D) 30% to 32% Electronic Grade: This is used to clean electronic parts and not for internal use.

E) 35% Technical Grade: This is a more concentrated product than the Reagent Grade and differs slightly in that phosphorus is added to help neutralize any chlorine from the water used to dilute it.

F) 35% Food Grade: This is used in the production of foods like cheese, eggs, and whey-containing products. It is also sprayed on the foil lining of aseptic packages containing fruit juices and milk products. THIS IS THE ONLY GRADE RECOMMENDED FOR INTERNAL USE.

G) 90%: This is used as an oxygen source for rocket fuel.

Short Description: 
Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.

Hydrogen Peroxide 6% Solution supplier in Mumbai, Kandla, Visakhapatnam, Chennai, Kolkata, Fujairah, Dubai, Sharjah, Abu Dhabi.

Mild Disinfectan and cleaning agent

Sodium Hypo Chlorite

Sodium Hypochlorite solution, Used for sterlizing water and swimming pool...This will - Remove odors. Remove Color. Improve permaganate time.

Alias: 

Chloros, Bleach, Twin Oxide Compound A, Ipo chlor 16%, Ipochlor Bluetech, Sodium Hypo Chlorite 25 Ltr

Active Matter: 
12-15
Application: 
  • Also used as a disinfectant and germicide , especially in the sterilization of water.

  • It is also used for making wool unshrinkable and in the manufactire of chloroform.

  • For the purpose of disinfection and bleaching  , a weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficientPotable Water Treatment

  • Aquatics and Pools

  • Odor Control/Corrosion Control

  • Food & Beverage Processing

  • Wastewater Treatment

  • Cooling Towers, Inland Power Stations & Industry

  • Irrigation Systems

  • Agriculture/Farming
     

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL:  Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Packing Size: 
25.00 Ltr.
Using Procedure: 

6% Sodium Hypochlorite Solution. Disinfectant for use in drinking water. Use one drop of solution per 10 ltrs of drinking water, 600 ml of solution per 36 tons of drinking water.
 

General formulation to calculate  how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration. 

                                                                        req'd residual in ppm
  Volume of hypo  =  volume of water  x  (  ----------------------------- )
                                                                           1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add  ?

  • (5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

  • (5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

                                                                                                              req'd residual in PPM
Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )
                                                                                                               1,000,000 x hypo %

  • This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

  • (8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds
Note: 

Spraying - Following rough washing to a good Water White or better, apply dilute Bleach to 1 - 3% strength.  First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump.  To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.

Injection -no.

Re-circulation - Following rough washing  to a good Water White standard or better, apply dilute Bleach to 1-3% strength.  Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 - 500C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours.  After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-850 C after 45 minutes.  Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.

** When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between  tanks as required.

* Use a strainer at the pump stack when circulating any solution.
Tank Lining - Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).

**These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.             

Short Description: 
Extra pure LAB TESTED Clear greenish-yellow liquid miscible in any proportion with water.

Sodium Hypochlorite manufacturer and supplier in Barka, Muscat, Sohar, Oman, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, UAE Middle East, Sudan, Yemen, Nairobi Kenya Africa, Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Kandla Mundra, Surat Hazira, Gujrat, Navi Mumbai MIDC

Note : Store in cool place

UN No :  1791
IMDG CLASS : 8

PACKING GROUP : III

ODOUR  : IRRITATING, PUNGENT ODOUR

R31: Contact with acids liberates toxic gases

R34: Causes burns

S-PHRASES

S1/2: Keep locked up and out of the reach of children.

S28: After contact with skin, wash immediately with plenty of water

S45: In case of accident or if you feel unwell, seek  medical advice (show the label where possible)

S50: Do not mix with acids

S50: Do not mix with reducing agents

X2: Restricted to professional users.Warning! Avoid exposure - obtain special instructions before use.

EMERGENCY AND FIRST AID PROCEDURES

EYE:

OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.

SKIN:

SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.

INIIALATION:

Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION:

           NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of  carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material

 

Other Related PRODUCTS LINKS :

Textile Hypo Bleach SODIUM HYPO CHLORITE , Sod Hypo Chlorite conc activeCHLORINE , CHLORINE LIQUID , Calcium Hypo Chlorite Conc active Chlorine , Chlorine Tablet cyanurate , Chlorine Tablets Calcium Based , DYE REMOVER ORG DICHLOR , Dechlorination Soln De-Hypo

Chlorine Alkaline Water

Calcium Chloride Powder

Calcium Chloride Manufacturer, Exporter and supplier. Calcium chloride is whitish granules, powder or flakes. 

Application: 

The chemical formula of calcium chloride is CaCl2, and its molar mass is 110.983 g/mol. It is an ionic compound. 

Calcium chloride, CaCl2, is a common salt. It behaves as a typical ionic halide and is solid at room temperature. It has several common applications such as brine for refrigeration plants, ice and dust control on roads, and in concrete

Packing Size: 
25.00 Kg.PWD
Using Procedure: 

It has a salty taste, but you cannot smell any odor. Calcium chloride is soluble in water and composed of calcium and chlorine.

Note: 

Calcium chloride also used as ice melter. We are one of quality product calcium chloride suppliers and ice melt distributors of ­­­­­­­Calcium Chloride on the Europe, east coast, US States and Canada. We are a keeping ready stock of Calcium Chloride flake and pellets.

Short Description: 
The chemical formula of calcium chloride is CaCl2, and its molar mass is 110.983 g/mol. It is an ionic compound.

Calcium chloride helpful for raising calcium hardness in water. Also used for ice melting, dust control, and other applications.

CEMENT ADDITIVE Construction Chemicals...

Water Reducing Agent 

1. Polycarboxylate Superplasticizer

2. Sulfonated Naphthalene Formaldehyde

3. Sodium Lignosulfonate

4. Calcium Lignosulfonate

Retarder

1. Sodium Gluconate

We bring high-grade Calcium Chloride from reliable and authentic sources of the market. The powder is an ionic compound prepared by chemical reaction of chlorine and calcium. Moreover, it is a deliquescent compound which can dissolve in water very well. Formulated using high grade base material, it is widely used in several processes and operations related to industrial applications.

Calcium Chloride aggressively absorbs moisture from the air, first causing a swelling of the crystals. If the air is humid enough and the temperature is high enough, the crystals melt and liquid saline solution brine) is formed.

It works well over a temperature range from freezing up to 100C or more. At low temperature the salt does not absorb moisture under dry conditions. In practical terms calcium chloride desiccants are effective at Relative Humidity above 20-30%, but are relatively more effective under moist conditions. 

Calcium chloride  also can be used to accelerate strength development in mass concrete during winter. RX MARINE INTERNATIONAL is largest stockist and exporter of Calcium Chloride from India and Middle East.

Calcium Chloride supplier in Mumbai, Kandla, Kolkata, Vizag, Chennai, Fujairah, Sharjah, Abudhabi, Dubai.

Manufacturer Supplier and Exporter of Calcium Chloride from INDIA. Our product is- high-quality Calcium Chloride.

 

We manufacture Calcium Chloride in different forms such as Liquid, Solid, Fused and Anhydrous. Soon we'll be coming up with Calcium Chloride Prills (Granules) also.

 

Calcium Chloride plays in various industries, ranging from manufacturing to water treatment, from dust control to de-icing, to food preservatives etc. As a versatile and indispensable compound,

it is our commitment to deliver the finest Calcium Chloride products that meet and exceed the industry standards and have a wide range of applications.

 

 

Calcium Chloride Lumps (70%-75%)

Calcium Chloride Powder (90%-96%)

Calcium Chloride Liquid (30%-35%)

Calcium Chloride Liquid 40%

 

 

RXSOL group is commited for High-quality Calcium Chloride products can bring to your operations.

CaCl2

PolyAcrylAmide

Flocculant polyacrylamide Cationic/Anionic/Nonionic supplier and Exporter in India UAE OMAN.

Alias: 

PolyAcrylAmide, Anionic Flocculating agent, Polyacrylamide/ Polymer

Application: 

PAM wide range of applications  in various industries:

Waste water treatment for all industries

Papermaking: Retention and Drainage Aids & Dispersant

Textile: Sizing agent

Mining: Flotation & Tailings concentration

Oil and gas:Drilling fluid & Fracturing fluid & Water Plugging &Profile control & fluid loss agent & shale inhibitor ect

Packing Size: 
25.00 Kg.Liq
Short Description: 
PAM wide range of applications in various industries INCLUDING paper, sewage, Mining, Textiles

We have been focusing on the export of flocculant PAM (Polyacrylamide/ Polymer ) for more than 16 years.

 

Flocculant polyacrylamide Cationic/Anionic/Nonionic

 

We would like to introduce you to the 

Poly Acryl Amide manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Poly Acryl Amide at a competitive price from us. We have ready stock of Poly Acryl Amide in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

PolyAcrylAmide

GAS TURBINE Cleaner GTC 1000

RXSOL GTC 1000 GAS TURBINE CLEANER is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine -and also inhibits corrosion.

Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.

Alias: 

Clean Blade GTC 1000, Compressor Washing Chemicals GAS TURBINE CLEANER

Active Matter: 
98 - 99%
Application: 

Gas Turbine Compressor Cleaning.

Packing Size: 
220.00 Kg.Liq
Using Procedure: 

By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL GTC 1000 GAS TURBINE CLEANER has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.

The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.

Note: 

Appearance
Clear pale straw coloured liquid with a mild pleasant odour.

Solubility
Completely soluble in water. No agitation required.

Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.

Short Description: 
RXSOL GTC 1000 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors.

RXSOL GTC 1000 GAS TURBINE CLEANER Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen

Liquid Detergent for Gas Turbine Compressor Cleaning for GE Aircraft

FERROUS SULPHATE

Packing Size: 
50.00 Kg.PWD
Short Description: 
FERROUS SULPHATE

Corrosion Inhibitor Multifunctional Closed Chilled Systems

Corrosion Inhibitor Additives for Water system
This is a Highly effective INHIBITOR for closed loop , line chilled water with unique dual control of corrosion and scale from system.

 

This closed water treatment chemicals are  designed to treat hot and chilled water systems. The product contains a combination of nitrite, borate, and silicate formulated to minimize corrosion and deposition. The product comes in a clear and pink appearance form.
 

Alias: 

Accepta 2807, Korodex 8574, TRASAR TRAC 102, CORRSHIELD NT 4293, Corrosion Inhibitor Multifunctional closed/chilled systems 30 Kg Ltr

Application: 

RXSOL-40-4011-025 is a superior multifunctional, nitrite-based chemical treatment used for the control of corrosion in closed cooling systems and chilled water systems. RXSOL-40-4011-025 is a liquid product containing a combination of ferrous and non-ferrous corrosion inhibitors, a non-carbonate buffer, scale inhibitors, dispersants and a leak detection dye.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Compatible with Feeders, piping and valves should be made of steel, polyethylene, or PVC. This Treatment can be controlled by a nitrite test.

The recommended dosage of RXSOL-40-4011-025 is 15.6-23.4 l/m3 of system capacity or 60.6-87 RXSOL-40-4011-025 of system capacity in all systems. Clean up the system if the system becomes contaminated with iron. Maintain 600-750 ppm nitrite as NO2. RXSOL-40-4011-025  is intended for industrial use only. It should not be fed to potable water systems

Note: 

◦Very effective to Controls corrosion on brass, aluminum, steel, and stainless steel
◦Extends equipment life & Improves overall equipment efficiency

Short Description: 
Premium Quality Alkaline Corrosion Inhibitor blend for Metal protection inside the CLOSED circulating system

Why RXSOL CORROSION INHIBITOR for cooling Water System Required ?

Corrosion damage metal surface by chemical or electrochemical reaction which results failure of equipment with the resultant cost of replacement and plant downtime.

Due to Deposition of  CORROSION  result fouling in of heat exchanger fouling caused by the accumulation of corrosion products., Heat Transfer efficiency decreases. Which resulting loss of plant efficiency due to loss of heat transfer.
 

HOW to CONTROL CORROSION in COOLING SYSTEM?

 

Primary Step : Use calcium carbonate bleanded RXSOL-40-4090-025 to increase alkalinity in the water which results to form a protective film on METAL SURFACE.
Second Step  : Remove the corrosive oxygen from the water, either by mechanical or chemical deaeration Oxygen Scavenger RXSOL-50-5023-025. Excess of OXYGENT is mother of CORROSION.

Third Step       : Add corrosion inhibitors RXSOL-40-4011-025

Which material is used to protect COPPER METAL in Water System?

Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA).

#CorrosionInhibitor_MultifunctionalClosedChilledSystems
#CorrosionInhibitor_ClosedChilledSystems
#CorrosionInhibitor_ClosedCoolingSystems
#BestCorrosionInhibitor_manufacturerSUPPLIERinDUBAIuae
#Corrosion-Inhibitor-Multifunctional-Closed-Chilled -ystems

Corrosion Inhibitor Multifunctional Closed Chilled Systems Manufacturer and supplier in India UAE Oman.

Advantages: -

  • 1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL-40-4011-256 is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product is accidentally overdosed, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.
  • 2. Improves generating cooling efficiency by maintaining a clean heat transfer
  • 3. Corrosion protection by using superior corrosion inhibitor.
  • 4. Reduced maintenance and down time
  • 5. Compatible with Coolants / Antifreeze solution / Glycol .
  • 6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Corrosion Inhibitor Closed Cooling systems manufacturer and supplier in Mumbai, Kandla, Surat Gujarat, Chennai, Visakhapatnam, Kolkata, Haldia, Fujairah, Sharjah, Ajman, Mussafah Industrial Area Abu Dhabi, Abudhabi, Dubai, UAE Gulf, Ruwi Barka Muscat Oman, Nairobi Kenya, Sudan Yemen Canada

Corrosion Inhibitor Multifunctional Closed Chilled Systems RXSOL-40-4011-025  manufacturer and supplier in Mussafah Industrial Area Abu Dhabi, Dubai, Sharjah, Ajman, Fujairah, United Arab Emirates. Corrosion Shield Protection chemicals for Cooling System available in UAE and supplier near by me in Mussafah Industrial Area Abu Dhabi, Dubai, Sharjah, Ajman, Fujairah, United Arab Emirates.
 

RXSOL CHEMICAL is one of the leading Scale and Corrosion Inhibitor Chemicals Manufacturers & Suppliers in UAE for Industrial, Oil Field and Marine Shipping Industries

 

In Cooling system,  Specialized Corrosion Inhibiotr gives atmosphere for Corrosion Protection, RXSOL is most popular leading manufacturer of environmentally-friendly corrosion inhibitors in  Middle East.

 

HOW CORROSION INHIBITOR WORKS AGAINST CORROSION in COOLING system?
 

Corrosion inhibitors are chemicals that can significantly reduce the corrosion of metals when Dose / applied as per guideline into the water and fluids.

Corrosion Inhibitor Multifunctional closed/chilled systems 25 Ltr

Biocide 7000

Biocide 7000 is a broad spectrum liquid microbiocide for use in a variety of water treatment applications, including open and closed recirculating cooling systems, paper mills, air washers and non-potable water storage. Biocide 7000 causes immediate inhibition of growth on coming in contact with micro-organisms.

Alias: 

IAQ 7000

Active Matter: 
98 - 99%
Application: 

Biocide 7000 readily penetrates the surface of adhering biofilms and its biocidal action prevents micro-organisms from forming the sticky materials which are necessary to form biofilms in the first place. Thus Biocide 7000 is extremely effective against biofilm formation and at biofilm removal.

Biocide 7000 is stable over the wide range of conditions found in industrial water applications. It is stable in the presence of 1ppm free chlorine and its stability compared with many other biocides at different levels of pH, temperature and total water hardness is excellent. Biocide 7000  has been shown to be effective against Legionella species even at low concentration and high pH levels, although it is not recommended for use as a disinfectant. Further details are available
upon request.

Biocide 7000 is compatible with our entire range of corrosion and scale inhibitors and its stability and effectiveness in alkaline conditions makes it suitable for use as part of our 'High pH Solution for Open Evaporative Cooling Systems.

Packing Size: 
25.00 Ltr.
Note: 

ADVANTAGES

  • Broad spectrum activity against algae, fungi and bacteria, including
  • Legionella Pneumophila and sulphate reducing bacteria.
  • Very effective against biofilms.
  • Effective over a wide range of pH, temperature and water hardness.
  • Readily biodegradable when diluted.
  • Low toxicity.
  • Compatible with low levels of free chlorine or bromine as well acorrosion and scale inhibitors.
  • Can be used to disinfect certain ion exchange resins.
  • Does not contribute significantly to the AOX (Absorbable Organic
  • Halogens) level in a typical industrial effluent.
  • Does not interfere with the functioning of wastewater treatment plants, and is degraded readily by them.
  • Effective at low concentration - cost effective.
  • Not surface active - non-foaming.

HANDLING :

This product in a strong irritant to skin and eyes, both as a concentrate and as a solution. Eye and skin contact should be avoided by wearing PVC/ rubber gloves and goggles as well as protective overalls.

STORAGE :

Store in cool, well ventilated area. Keep container tightly closed. Do not store with Alkalies such as Category B and C products or oxidising agents such as Category I and J products.

Short Description: 
Titanium dioxide Based Biocide

Biocide 7000 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Biocide 7000 at a competitive price from us. We have ready stock of Biocide 7000 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

RXSOL Raw Materials Chemicals Division

RXSOL  is a professional company in sourcing and supplying high quality raw Materials for Water Treatment Chemicals manufacturing as follows:

1- Biocides manufacturer and supplier:

CMIT/MIT (Isothiazolinone 14%), BKC, Glutaraldehyde, Bronopol, OUAT (Quaternary ammonium chloride), PolyQuat, DBNPA, THPS 75%, Ammonium bisulphite, Bromine Tablets, copper sulphate pentahydrate.

2- Phosphonates manufacturer and supplier:

PBTC, HEDP, ATMP, DTPMPA.

3- Polymer scale inhibitors manufacturer and supplier:

Poly Acrylic Acid (PAA) copolymers and Terpolymers, AA/AMPS copolymers.

4- Corrosion inhibitors and oxygen scavengers manufacturer and supplier : 

Cyclohexylamine, Morpholine, DEHA, Benzotriazole, Tolytriazole, Phenolphthalein white, Sodium Molybdate, Sodium Nitrite, ZINC Sulphate heptahydrate, Zinc chloride and many others.

Titanium Dioxide Based Biocide

Hydrogen Peroxide

Hydrogen peroxide is a chemical compound with the formula H2O2. It is the simplest peroxide (a compound with an oxygen-oxygen single bond) and in its pure form is a colorless liquid, slightly more viscous than water.

Alias: 

H2O2 35 percent, HydrogenPeroxide 35 percent 30 Kg, Hydrogen Peroxide 35%

Application: 

Hydrogen Peroxide has many use including House Hold, Domestic. Agriculture, Textile, Industries, Medical and West water Treatment.

Packing Size: 
30.00 Kg.Liq
Using Procedure: 

House Hold : One of the most common uses of hydrogen peroxide is as a disinfectant. Spray it on surfaces like kitchen counter top and wipe with a clean rag. It can be used as a mouthwash too. You have to dilute the chemical with water and use it for rinsing the mouth. This mouthwash is also said to whiten teeth. Ensure that you do not swallow the liquid, while rinsing.
It can also be used to wash vegetables and fruits, in order to get rid of germs and pesticides. Add some hydrogen peroxide to a bowl full of water (you may also add a few pinches of salt). Soak the veggies and fruits for some time. Remove them and rinse with cold water, before use.This chemical is also used to purify water in swimming pools.
 

Agriculture : Farmers use it as an insecticide. They spray diluted form of this chemical, on plants, so that the pests and weeds get killed, without causing harm to the plants. Its also used for watering plants. Mix an ounce of this chemical with a quart of water and use it on plants. Apart from boosting the level of oxygen in the soil, this mixture is also said to prevent root rot. Some people soak seeds in it, after diluting it with water. It is said that this will fasten the process of germination. For this purpose have to mix 1.5 teaspoons of hydrogen peroxide in a cup of water.

Textile: It acts as a stain remover. Put 1 spoon tea in 1 bucket water  and let it sit for a while. After that, rinse the stains with water and soap.
As it has bleaching property, it is used as a bleach too.

IIndustrial :

Reduced Sulfur Compound Treatment for Refinery Wastewater

Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species.

Supplemental Dissolved Oxygen to Reduce BOD and COD

Hydrogen peroxide has been used to reduce BOD and COD in refinery wastewater Supply of Supplemental Dissolved Oxygen (DO) when biological treatment systems experience temporary overloads or equipment failure.Predigestion of wastewater which contains moderate to high levels of compounds that are toxic, inhibitory or recalcitrant to biological treatment.As indicated by these examples, hydrogen peroxide can be used as a stand-alone treatment or as an enhancement to existing physical or biological treatment processes, depending on the situation.

Wastewater Pretreatment
Hydrogen peroxide is one of the most versatile, dependable and environmentally compatible oxidizing agents. The relative safety and simplicity of its use as an oxidizing agent has led to the development of a number of applications in refinery wastewater systems.

 

Note: 

Product specification

Molar mass :::--- 34.0147 g/mol
Appearance :::--- light blue; colorless in solution
Odor :::--- sharpBoiling point :::--- 150.2 °C, 423 K, 302 °F
Solubility in water :::---Miscible
Solubility :::--- soluble in ether, alcohol insoluble in petroleum ether
Viscosity :::---1.245 cP (20 °C)

Short Description: 
Pure form is a colorless liquid, slightly more viscous than water.

Hydrogen Perxoide supplier and exporter in India and Middle East. H2O2 used as an oxidizer, bleaching agent and antiseptic.

#HydrogenPEROXIDE_Muscat
#HydrogenPEROXIDE_DUBAI
#HydrogenPEROXIDE_Mumbai
#HydrogenPEROXIDE_Surat
#HydrogenPEROXIDE_Kolkata

Hydrogen Peroxide 35% Exporter Importer and supplier in India UAE Oman, Nairobi, Canada. Pure Hydrogen Peroxide supplier in RUWI BARKA, Muscat Soha Oman, Fujairah, Sharjah, Ajman, Abudhbai, Dubai, Mumbai, Surat GIDC, Gandhidham, Chennai, Kolkata, Visakhapatnam, AndhraPradesh, Ennore, Paradip

Other Valubale Product distributor manufacturer supplier in India UAE OMAN:

Hydrogen peroxide 35%, 50%, 60%

Caustic Soda Flakes & Pearls

Phosphoric acid 85% Food grade

Soda ash light & Dense

CDEA

White Oil

Ferric Chloride 40-42%

Hydrochloric Acid 30-35%

Sulphuric Acid 98%

Nitric Acid 68% / 61%

Formaldehyde 37%

TDI 80:20

Methylene Chloride

H2O2

stock-clearance.png