Search

Sewage Chemicals Treatment-40

Polylactic acid

Packing Size: 
25.00 Kg
Short Description: 
Polylactic acid (PLA) is a biodegradable, recyclable, and eco-friendly polyester made from renewable resources like corn starch, sugarcane, and potatoes. It's also known as poly(lactic)acid or polylactide
  • 41 reads

ALKALINE HD coal remover

A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.

Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.

Alias: 

Rock Phospate Cleaner, PETCOKE looser, COAL REMOVER RX Hold 220 Ltr

Active Matter: 
54 - 63
Application: 

• Use cold - No Heating required.
• Easily dissolves deposits containing carbon , polymer resin etc.
• Economical to use.
• Scraping not required.
• Non- flammable.
• Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
• Cleans oil side of fuel heaters, oil coolers, etc.
• Can be used for cleaning of : -Fuel Oil Filters - Pistons - Piston rings - Valve cage

Packing Size: 
220.00 Kg.Liq
Using Procedure: 

Directions for Use and Dose Rates

Soak Method:-
It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning and the available downtime.Actually, the user is the best one capable to regulate the quantity and concentration to be used for the situation at hand.In any case, when the accumulation is not heavy, a 50% solution with water must be used. Otherwise,RXSOL-22-2201. can be used undiluted especially when deposition is heavy and hard spots persist.

Cleaning Procedure

Conventional cleaning methods such as a brush,hard sponge, thick and hard broom and /or a mop can be used on heavy duty and hard stain deposits.Note that for heavy accumulations the cleaning procedure might be necessary to be repeated until the results are satisfactory. Furthermore, is important to keep in mind that 1 litre of RXSOL-22-2201 is sufficient to cover a surface area of 8–10 square meters.

NOTE ::: -- Let this product soak into the surface for 30-45 minutes. Then using a high-powered spray washer blast the surfaces until the stains and discoloration is gone.

Note:-
• Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
• Stubborn deposits should be scrubbed to assist the cleaning operation.

Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Note: 

COAL REMOVER manufacturer and supplier in India / Turkey / Middle East. We havs stock point in Mumbai, JNPT, Surat, Hazira, Mundra, Kandla, sikka, Goa, Manglore, Visakhapatnam, Kamraj Port, Ennore, Chennai, Kolkata, Buz Buz, Paradip, Fujairah, Istanbul, Dubai, Sharjah, Abu Dhabi, Gulf.

We are classified as COAL REMOVER exporter of RXSOL brand.

you may click below to get all location details :::

For Tamilnadu - http://ennoreindiachemicals.com/contact-us

For Andhra Pradesh - http://vizagchemical.com/contact-us

For East Coastal - http://eastindiachemicals.com/contact-us

For Gujrat Port - http://westindiachemical.com/contact-us

For Mumbai Port -  http://marinechemical.in/contact-us

For JNPT - GOA - Manglore port - http://rxchemicals.com/contact-us

For Middle East - Gulf - http://www.dubichem.com/contact

 

Related Products: 
ACQUATuff High Foam
Cement Remover RX Hold
Safety Accessories: 
COAL REMOVER RX Hold
Iron Ore Red Dust Cleaner
Article News: 
SHIP CARGO HOLD CLEANING DETERGENT supplier in India UAE Oman
Short Description: 
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.

Ship Hold Coal cleaning chemicals typical video Link.  We are one of largest coal cleaning chemicals - detergent manufacturer and supplier in India and Middle East.

This product is most popular for Ship Hold cleaning detergent for coal cleaning. Shipchandler Shipping Agent can get good discounts directly from our factory by providing there registered accounts number. 

#CoaLremover_Mumbai
#CoaLremover_MundraKANDLA
#CoaLremover_Visakhaptnam
#CoaLremover_FujairahMuscat
#AlkalineCleaner
#ShipHoldCleaner_Alkaline

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 

 

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 

 

Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Coal Remover - Powerful ship hold cleaning detergent manufacturer and supplier in Navlakhi Port, Hazira, Sikka, Jamnagara, Kandla, Mumbai, Manglore, Goa, Chenna Ennore, Visakhapatnam Vizag Gangavaram, Kolkata Haldia, Paradip, Manglore, Fujairah, Abudhani, Ajman, Sharjah, Barka, Muscat Oman, Canada, Kenya Nairobi Mombasa

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 

Recommended to use spray equipment also can be apply by hand spray method.

The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 

 

Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 

 

Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.

STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Ship Cargo Coal cleaning chemicals

FAQ: 
How Coal remover cleaning property can be enhanced
  • 1077 reads

Activated Carbon Pellet

RXSOL Carbon, Was Founded in 1996 & Located in KOLKATA Industrial Area, Mumbai Delhi Road, Howrah, West Bengal. Our company is Professionally Engaged in Operation of ACTIVATED CARBON, Activated Alumina, Silica Gel, and many other chemicals. 

Alias: 

Carbon Pellet

Active Matter: 
100
Application: 

Activated Carbon Pellet can be used in solvent recovery from air streams such as the vapor of Benzene, ketone, ester, petroleum. The fasting adsorption and desorption, high capacity for treatment solvents air stream that the recovery capacity can reach 97%.
The odors in the indoor air include Ammonia, Amine, and trimethylamine, sulfur methanol, hydrogen sulfide, etc., Using Pellet as adsorption material removes and deodorize more efficient, and also remove particles and moistures existing in the air, particularly Aromatics which may cause cancers.
 

Activated Carbon manufacturer and supplier

Activated Carbon has a relatively larger particle size compared to powdered Activated Carbon and consequently, presents a smaller external surface. Diffusion of the adsorbate is thus an important factor. These carbons are therefore preferred for all absorption of gases and vapors as their rate of diffusion are faster. Granulated carbons are used for water treatment, deodorization and separation of components of flow system and is also used in rapid mix basins. GAC can be either in granular or extruded form.

Activated carbon is useful in drinking water treatment because it acts as an adsorbent , and can effectively remove particles and  organics from water. These organics are of great concern in water treatment because they react with many disinfectants, especially chlorine.

 

The use of Activated Carbon in wastewater treatment systems is a proven process for removal of organic compounds. As a tertiary treatment method, carbon adsorption and regeneration have been used to process domestic wastewaters contaminated with industrial wastes of organic origin as well as biologically treated waste waters. Activated Carbon, when contacted with water containing organic material, will remove these compounds selectively by a combination of adsorption of the less polar molecules, filtration of the larger particles, and partial deposition of colloidal material on the exterior surface. The quantity of Activated Carbon required will depend upon the degree of contamination.

Packing Size: 
25.00 Kg
Using Procedure: 

An amorphous from of carbon characterized by high adsorptivity for many gases, vapors, and collodial solids.

Used for water and air purification, solvent recovery, waste treatment, removal of sulfur oxide from stack gases and "clean'' rooms as deodorant, and for air conditioning.

Note: 

Widely used for purification of exhaust gas, chemical raw material gas, chemical synthesis gas, gas for the pharmaceutical industry, carbon dioxide gas for beverages, purification of hydrogen gas, nitrogen gas, hydrogen chloride, ethane gas, purification and separation of atomic facility exhaust, etc. There is also impregnated activated carbon, such as KOH activated carbon, NaOH activated carbon, sulfur impregnated granular activated, Desulfurization and denitrification activated carbon, acid wash activated carbon for removing special harmful gases.

Related Products: 
Activated Carbon for H2S Adsorption
Activated Alumina Ball 5 to 8
Silica Gel Perfect Dry sachet
Bentonite Powder
Castor Oil FSG
Coal Based Activated Carbon XP 900
Video Links: 
Activaeted carbon Pellet
Article News: 
SILICA GEL SUPPLIER IN INDIA
Short Description: 
Pellet can be used in solvent recovery from air stream such as the vapor of Benzene,

DETERMINATION OF M.B. VALUE OF ACTIVATED CARBON REAGENT: 

Methylene Blue Solution – Dissolve 0.15 gram of methylene blue confirming to IS: 2230-1962 in 100 ml of Distilled Water (Distilled water having pH value 7.0). PROCEDURE : Weigh accurately about 0.1 gram of the material, as received, with accuracy of 0.01 gram and transfer to 50 ML Glass stoppered flask. Add from a burette 10 ml of methylene blue solution and shake for 5 minutes. After the first 10 ml are decolorized continue to add methylene blue solution (1 ml at a time) till the blue colour disappears for 5 minutes. Decolorizing power of Activated Carbon is expressed in terms of milligrams of methylene blue adsorbed by 1 gram of activated carbon. (This value is MB value).

CALCULATION :

DECOLOURIZING POWER = 15 x V  Divided by 10 x M

 Where V = volume in ml of methylene blue solution consumed, and M = mass in gram of the material taken for the test. (Use methylene blue of any standard company to prepare solution and compare solution with standard solution of methylene blue as it does vary batch to batch).   

Activated Carbon is a porous material that removes organic compounds, pollutants, contaminants and other impurities from liquids, gases, chemicals, metals, etc. Our diversed Product Portfolio ranges from Acid Washed Grade Activated Carbon, Unwashed Grade Activated Carbon, Granular Activated Carbon upto Powdered Grades of Activated Carbon. In addition to our vivid range of products, we also provide a varied choice in the manufacturing base of Activated Carbon. viz. Coconut Shell Based, Wood Based and Coal Based Activated Carbons.

 

Activated Carbon is commonly used to adsorb natural organic compounds, taste and odour compounds, and synthetic organic chemicals in drinking water treatment. Adsorption is both physical as well as chemical process of accumulating a substance at the interface between liquid and solids phases. Activated Carbon is an effective adsorbent owing to its high porosity and availability of a larger surface area for better and efficient contaminant adsorption. Activated Carbon is available as Powdered Activated Carbon (PAC) and Granular Activated Carbon (GAC).

Activated Carbon used in the field of Edible Oil, Dyes, Fertilizer, Pharmaceutical, Oil Refineries etc.   We are exporter of activated carbon globally to countries like UK ,USA, Canada, UAE,  Brazil, Chile, Dubai,  Argentina  Australia Austria  Bahrain Bangladesh  Belgium  Brazil   Czech Republic Denmark Finland France Germany  Iran Iraq Ireland Japan-South Korea  Kuwait  Mexico  Netherlands New Zealand Norway Panama Portugal Qatar  Russia Saudi  Singapore  South Africa  Spain  Sweden Switzerland Turkey   Yemen  Zimbabwe etc.

 

In India and UAE we have Sales Representatives in the following cities -

 

Ennore - Chennai ,  Surat , Vishakapatnam (Vizag), Navi Mumbai , Kolkata , Kandla Gandhidham - INDIA

Fujairha - UAE

Activated Carbon Is An Essential Filter Media For Every Aquarium
It Can Effectively Eliminate Odors, Detoxifies Harmful Metals, Purifies And Softens Water
Prevents Build Up Of Harmful Gases
 

 

GRADE  RX AW-200  RX AW - 250  RX AW - 300  RX AW - 350  RX AW - 400  RX AW - 450 
MB VALUE mg/gm  200 (±10)  250 (±10)  300 (± 10)  350 (± 10)  400 (± 10)  450 (± 10)
pH OF 1% WATER EXTRACT 6 to 7 6 to 7 6 to 7 6 to 7 6 to 7 6 to 7
ASH % MAX 4 4 4 4 4 4
SOLUBLE ASH % MAX 1 1 1 1 1 1
IRON ppm MAX 250  200  200  200  200  200 
MOISTURE % MAX  5 to 10 5 to 10 5 to 10 5 to 10 5 to 10 5 to 10
ACID SOLUBLE % MAX  2 2 2 2 2 2
WATER SOLUBLE %  1 1 1 1 1 1
L.O.D % MAX  7 to 10  7 to 10 7 to 10 7 to 10 5 to 10  5 to 10
CHLORIDES ppm  USP USP USP USP USP USP
% KMnO4 ADSORPTION  55  65  75  85  90  95
IODINE VALUE mg/gm  800 (± 50)  850 (± 50)  1000(± 50)  1100(±50)  1150  1200
METHANOL TEST   No Turbidity No Turbidity Passes Passes Passes Passes
PARTICLE SIZE  85 % Passing through 250 mesh size  85 % Passing through 250 mesh size  85 % Passing through 250 mesh size  85 % Passing through 250 mesh size  85 % Passing through 250 mesh size  85 % Passing through 250 mesh size 

 

Carbon Pellet

FAQ: 
Which Product is used for condensate purification in Petroleum Refinery?
How to reduce coke formation by reducing Higher polynuclear aromatics HPNAs during hydrocracking process?
How to remove and purify oil refinery products by removing polycyclic aromatics and color bodies.
  • 2912 reads

Boiler Water Treatment Autotreat

Alias: 

BOILER WATER INHIBITOR, GREEN BWT, DM-532, OBWT-3, Autotreat 30 Kg Liquid

Packing Size: 
30.00 Kg.Liq
Using Procedure: 

The product should preferably be dosed continuously with a Rxsol Boiler Water Treatment Dosing Unit. Alternatively the product can be fed into the feed line by means of a by-pass pot feeder.

Dosage and control

Minimum dosage is 1.2 liters of Autotreat/ton of boiler capacity to reach a P-Alkalinity level of 100 ppm. For an untreated system it is recommended to initially bring the treatment up to a suitable level of 200 ppm p-Alkalinity. The dosage chart given below is for convenience to determine the amount of product required to elevate P-Alkalinity. Note that the table is based on reaching 200 ppm. P-Alkalinity.

 

Sampling and testing

A representative sample of boiler water should be drawn for analysis daily. The sample should always be taken from the same point after blow down, cooled and tested immediately. Follow the Spectrapak Test Kit instructions and log the results. It is important that regular testing is carried out to ensure that treatment levels are correct.

Note: 
  • Liquid boiler water treatment chemical for simplified dosing and handling.
  • Suitable for all boilers, up to 30 Bar pressure.
  • Prevents scaling and corrosion, increasing system life and reliability.
  • Contains volatile amines to neutralize acids occurring in condensate system.
  • Dispersant action suspends sludge and sediment particles for efficient removal by blow down.
  • Suitable for dosing with Rxsol Boiler Water Treatment Dosing Unit.
  • Keeps boiler tube surfaces clean, promoting the best heat transfer conditions, saving energy.
  • Simple testing to determine treatment level.
Related Products: 
Hardness Phosphate Control
Article News: 
Boiler Water Treatment
RXSOL AUTO WATER TREAT
VALUABLE MARINE CHEMICALS for SHIP MAINTENANCE and SHIP HOLD CLEANING
Short Description: 
Autotreat is a boiler water conditioner designed for optimum protection of boiler systems when used in conjunction with Oxygen Scavenger Plus. This well known phosphate treatment with new polymer technology. which helps to keep precipitates soft and no adherent for easy removal by blow down.

#BoilerWaterTreatment_Chemical
#BoilerChemical_ManufacturerSupplier
#
 

Boiler Water Treatment Marine Boiler Auto Treat Chemicals manufacturer and supplier in India, UAE Oman Nairobi. RXSOL AUTO Treat Boiler Water Treatment Chemicals supplier in Gahala Ruwi Barka Muscat Oman, Fujairah Sharjah Ajman, Abudhabi, Dubai, Mumbai, Surat Hazira, Gandhidham, Kandla, Mundra, Visakhapatnam, Gangavaram, Chennai Ennore, Haldia Kolkata, Paradip, Nairobi Kenya

RXSOL Valuable Water Treatment Chemicals and Products
1) Oxygen scavengers, corrosion inhibitors, Alkalinity builders, Scale inhibitors, Antifoams, Sludge conditioning agents, Condensate Treatment Chemicals and Cleaning Chemicals for Steam & Hot Water Boilers.

2) Corrosion & Scale Inhibitors, Biocides & Algaecides, Antifoams, Dispersants & Sludge Conditioners, Flushing and cleaning chemicals for Open Re-circulating Cooling System (Cooling Towers).

3) Corrosion Inhibitors, Biocides, Flushing and cleaning chemicals for Closed Loop Re-circulating Cooling Systems (Chillers)

4) Antiscalants and Cleaning Chemicals for Reverse Osmosis Plants.

5) Corrosion (Red water) inhibitors and Disinfectants for Potable & Domestic Water Pipe Networks

6) Cationic, Anionic and Mixed bed Ion Exchange Resins

7) Organic and Inorganic flocculants & Coagulants for water and waste water

8) Activated Carbon for Potable Water, Waste Water, Chemical and Petrochemical Industries and Oil & Gas. Activated carbon suppliers in UAE, Dubai, Sharjah, Abu Dhabi, Qatar, Saudi Arabia

9) Odour control chemicals for waste water
10) Filtration media .. Sand, Gravel, Anthracite, Birm and others.

ONE SHOT Boiler Water Treatment Chemicals

Polymaleic acid

Packing Size: 
60.00 Kg.PWD
Short Description: 
Synonyms (Z)-2-Butenedioic acid homopolymer; Hydrolyzed polymaleic anhydride; HPMA; PMA

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40% 

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC). 

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate. 

Polymaleic acid manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Polymaleic acid at a competitive price from us. We have ready stock of Polymaleic acid in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

  • 2580 reads

Corrosion inhibitor for copper/copper alloy system

RXSOL-40-4017 is an excellent organic, film forming, liquid corrosion inhibitor product developed specifically for copper and copper alloy based water systems. RXSOL-40-4017 is designed to supplement other chemical treatments used in open re-circulating cooling water systems that contain copper or copper alloys.

In general, 0.5 - 2 ppm of active benzotriazole is needed for system control. This is about 1.5 - 6.0 ppm of RXSOL-40-4017.

 

Alias: 

Accepta 2334

Packing Size: 
25.00 Ltr.
Related Products: 
Corrosion Scale Inhibitor Liquid
Short Description: 
Corrosion inhibitor for copper/copper alloy system

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40% 

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC). 

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate. 

Corrosion inhibitor for copper/copper alloy system manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Corrosion inhibitor for copper/copper alloy system at a competitive price from us. We have ready stock of Corrosion inhibitor for copper/copper alloy system in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40% 

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC). 

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate. 

FAQ: 
Which material is used to protect COPPER METAL in Water System?
  • 7624 reads

Corrosion Inhibitor for Diesel Cooling Water Treat

Corrosion Inhibitor for Diesel Cooling Water Treatment - RXSOL CIDC is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid, also used as a corrosion inhibitor ( Protects all the metals including cast iron, mild steel, copper .)

Alias: 

E.W.T. Inhibitor 9-131c, Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC

Active Matter: 
45-50
Application: 

The stable oxide film that is formed by RXSOL CIDC prevents corrosion caused by the electrolytic action between dissimilar metals used in the system .RXSOL CIDC has been field tested and found to have no detrimental effects on non-metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL CIDC incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval.

Note: 

In cases where systems are contaminated with oil and/or scale, they should be cleaned before starting to apply RXSOL CIDC.There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL-20-2002-025 and descaling by using RXSOL 1008.

Related Products: 
ROCCOR NB RXSOL Colour Indicator
RXSOL 2000 Corrosion Inhibitor
Sodium Molybdate
Engine Guard NB Scale Inhibitor DEWT
Heavy Duty Cleaner
Short Description: 
Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib
Information: 

 Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC specialized product for Marine and shipping industrial use. Major supplier in all INDIAN and UAE Middle East coastal.  RXSOL CIDC Prolong the life of equipment by keeping scale and corrosion free.

RXSOL CIDC Water-soluble corrosion inhibitors FOR MTU engine.

Advatages : -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL CIDC is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product accidentally overdoses, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.

2. Improves generating cooling efficiency by maintaining a clean heat transfer

3. Corrosion protection by using a superior corrosion inhibitor.

4. Reduced maintenance and downtime

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Marine Diesel Engine specialized corrosion inhibitor.

NOTE : Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine, life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2-month interval.

Marine Chemicals

Boiler water treatment chemicals

Fuel oil treatment chemicals

Tank cleaning chemicals

Test kits and reagents

Cooling water treatment chemicals

Oil spill dispersant

Electric cleaning chemicals

Air cooler cleaning chemical

Antiscalants

Defoamers /Surfactants

Oxygen Scavengers

Custom Blending of Water Treatment Chemicals

Water Treatment Chemicals - Raw 

Coagulants

Flocculants

Disinfectants

Corrosion Inhibitors

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40% 

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC). 

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate. 

Boiler Water Treatment Chemicals

Precleaning & Passivation

Scale Inhibitors

Corrosion Inhibitors

pH Booster (Inorganics & Organics)

Descaling Chemicals (online / offline)

Sludge Conditioner

Condensate Treatment Chemicals

Amine Based treatment Scale Inhibitors

 

Corrosion Inhibitors

Biocides

Biodispersant

Dealkalisers

Descalants

Cooling Water Treatment Chemicals

Chiller Water

Treatment Chemicals

Pre cleaning Chemicals

Anticorrosion Treatment

Antimicrobial Treatment

STP Treatment Chemicals

Biocultures

Deodorants

Biomass Setting Agents

Disinfectants

Defoamers

Nutrients

Enzymes

ETP Treatment Chemicals

Coagulant

Flocculant

Decolorant

Dewatering Aids /

Filter Aids

Bioculture – Anaerobic & Aerobic

Deodorants

De-Emulsifiers

Polymers for Filter Press /

dewatering Evaporator Antiscalants

Water Treatment Chemicals

Biocides

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Dust control products

Membrane treatments

Metal passivators

Monitoring and control systems

Odor inhibitors

Oxygen scavengers

Scale inhibitors

Sludge dewatering polymers

MUNICIPAL water treatment chemicals

Coagulants/flocculants

Defoamers

Feed / make down equipment

Membrane treatments

Mixing equipment

Odor inhibitors

Scale inhibitors

Sludge dewatering polymers

MINING & MINERAL PROCESSING

Coagulants/flocculants

Dust control products

Filtration aids

Grinding aids

Monitoring and control systems

Non-sulfide flotation reagents

Rheology modifiers

Scale inhibitors

Specialty dewatering aids

Viscosity modifiers

CHEMICAL PROCESSING

Biocides

Cleaners

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Membrane treatments

Monitoring and control systems

Odor neutralizer

Oxygen scavengers

RO Membrane Treatment Chemicals

RO Pre -Treatment Chemicals

Membrane Antiscalants

Raw water RO (Food grade)

Effluent Recycle RO

Desalination Plants

Membrane Antioxidants

Membrane Cleaning Chemicals

Membrane Preservatives

Online / Offline Biocides

pH Boosters (Food Grade)

Taste Enhancers for RO Product water

Sanitizing Products for PSF, ACF Filter

Media and Pipelines.

Sugar Process Chemicals

Boiler Treatment Chemicals

Juice Clarification Aids

Syrup Clarification Aids

Mill Sanitation Chemicals

Viscosity Reducer

Anti Foamer / Defoamer

Evaporator Antiscalant & Descalants

Sugar Refining Compounds

Color Precipitants

Paper Process Treatment Chemicals

Anti Slimicides

Defoamers

Chemicals For Krofta Applications

Boil –out Chemicals

Vacuum Pump Antiscalant

ETP Chemicals

Water-soluble corrosion inhibitors FOR engine water treatment

  • 16608 reads

  • 20 reads

Drain Opener Liquid

This highly specialized product is formulated to open clogged drains, and to be use as a preventive maintenance product in drains, sinks, and grease traps.  This product maybe used in large municipal sewer lines.  This powerful product helps eliminate backups, rodding and snaking of drain lines.  RXSOL Drain Opener Heavy Duty contains a special additive that coats drain pipe surfaces to help prevent harmful corrosion.  Regular use will help prevent grease build-up.

Alias: 

M-77 BIATRON DRAIN OPENER

Active Matter: 
100
Application: 

Always wear face shield when using this high powered product.  Do-not mix with any other drain opener product or use immediately after using any other drain opening product.  Water activates this product.

  • Small Drains- Apply 8 ounces, allow to stand 2-3 minutes, then flush with water for 2 – 3 minutes
  • Floor Drains– Apply 1 quart, allow to stand 10 minutes, then flush with water for 5 minutes.
  • 6 to 8 INCH Drains – Apply ½ gallon, allow to stand 15 minutes, then flush with water to 5 minutes.
  • Grease Traps – Apply 1 quart or more.  Use 20% to 50% of initial application periodically for control.
  • Septic Tanks – Apply 1 gallon to 500-gallon capacity.  Pour into drain.
Packing Size: 
25.00 Ltr.
Using Procedure: 

Safety precaution must be taken before use of this product. Take heavy duty plastic bucket with more then 1 ltr water And by using gloves pour powder slowly slowly in bucket. 

  • Small Drains- Apply 8 ounces, allow to stand 2-3 minutes, then flush with water for 2 – 3 minutes
  • Floor Drains– Apply 1 quart, allow to stand 10 minutes, then flush with water for 5 minutes.
  • 6 to 8 INCH Drains – Apply ½ gallon, allow to stand 15 minutes, then flush with water to 5 minutes.
  • Grease Traps – Apply 1 quart or more.  Use 20% to 50% of initial application periodically for control.
  • Septic Tanks – Apply 1 gallon to 500-gallon capacity.  Pour into drain.
Article News: 
Flushing Procedure for Cooling water / Chilled water system
Short Description: 
This highly specialized product is formulated to open clogged drains, and to be use as a preventive maintenance product in drains, sinks, and grease traps. This product maybe used in large municipal sewer lines. This powerful product helps eliminate bac

Drain Opener Heavy Duty manufacturer and supplier in Oman, UAE Middle East, India, Kenya Africa, Canada. Drain Opener Heavy Duty available in various size and packing in Mumbai, Gandhidham, Kolkata, Chennai, Vizag, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Barka, Oman, Nairobi Mombasa Kenya, Canada

Drain Opener Heavy duty Liquid

  • 630 reads

FLOC EMULSION RX

Packing Size: 
220.00 Kg.Liq
Short Description: 
Water Treatment Flocculant Emulsion
  • 38 reads
stock-clearance.png