Search

Sewage Chemicals Treatment-40

Poly Aluminium Chloride Liquid

Poly Aluminium Chloride PAC a powerful Water Treatment Chemical

Alias: 

Poly Aluminium Chloride PAC 250 Kg Liquid

Application: 

Polyaluminium Chloride Applications
A part from the use in water treatment and urban water supply, Polyaluminium Chloride also finds application in drilling exploration, cosmetic, chemical, paper and various other industries.

Advantages of Polyaluminium Chloride:
• A wide range of pH value from 5 to 9 can be adapted by Polyaluminium Chloride and can be easily reduced to basicity, after processing
• It can easily adapt the different temperature of water during summer and winter and at different regions, i.e, the south and the north of China.
• It is best suited for an automatic dosing device of alum (hydrated double sulphate of potassium and aluminium)
• Its purifying effect is much better than other organic flocculants. It easily purifies the water on low-temperature and low turbidity. Also, it lower the water treatment cost by 20-80%.
• The dosage of Polyaluminium Chloride is smaller than other flocculants, which efficiently improves the quality of treated water.
• With huge size and rapid condensation service life of cellular filter (sedimentation basin), the quick formation of FOLC at low temperature is easily possible using the chloride.

Packing Size: 
250.00 Kg.Liq
Using Procedure: 

Polyaluminium Chloride Usage
• The user can allocate the remedy concentration of the product by test and can easily determine the appropriate dosage, which is to be added after they are dissolved and diluted.
• The perfect dilution ratio of liquid product is 5 to 50% and the solid product is 2 to 20%.
• The solid product dosages is 1-15kg/1000 tons water and liquid product dosage is 3-40kg/1000 tons water
• The perfect amount of dosage can be determined after coagulation tests and experiments.

Items  Data
Appearance  Solid powder, yellow
 
Al2O3 %  29 min
 
Basicity %  .0~90.0
 
Insolubles %   1.5 max
 
pH(1% water solution .5~5.0
 

 

Note: 

Salient Features of Polyaluminium Chloride:
• Made from pure raw material
• Used for drinking water treatment and paper mills as retention agent
• Appearance: solid powder, white
• Al2O3: 29% (min.)
• Basicity: 50.0% ~ 85.0%
• Insolubles: 0.5% (max.)
• PH (1% water solution): 3.5 ~ 5.0
• SO42-: 3.5% (max.)
• N: 0.09% (max.)
• As: 0.0005% max
• Mn: 0.045% (max.)
• Cr6+: 0.0015% (max.)
• Hg: 0.00002% (max.)
• Pb: 0.003% (max.)
• Cd: 0.0006% (max.)
• Fe: 0.008% (max.)

Short Description: 
Flocculation in municipal water supply, sewage and industrial effluent and for Paper manufacture.

 

Applications:

Municipal & Industrial Portable Water treatments

Municipal & Industrial Waste Water treatments

Sewage Water treatments

Separation of slurry in Industrial processes

Sizing in Paper & Pulp Industry

Decolorisation & Decontamination of dyes in Textile Industry

Poly Aluminium Chloride PAC a powerful Water Treatment Chemical
#SewageWaterTreatmentChemical
#PAC_Muscat
#PolyAluminiumChloride_DubaiUAE

Poly Aluminium Chloride PAC a powerful Water Treatment Chemical

Poly Aluminium Chloride Liquid manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Poly Aluminium Chloride Liquid at a competitive price from us. We have ready stock of Poly Aluminium Chloride Liquid in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Why Poly Aluminium Chloride PAC, a powerful water treatment chemical so popular?

 

PAC Poly Aluminium Chloride advantages:

 

PAC is a Powerful Efficient Coagulation and Flocculation

PAC is a Versatility for Various Applications

PAC results Cost-Effective Treatment
PAC have Minimal Environmental Impact

PAC is under Regulatory Compliance

 

 

OTHER  VALUABLE CHEMICALS supplier in INDIA OMAN UNITED ARAB EMIRATES
 
Activated Alumina Caustic Soda – Solution N-Butyl Acetate Sodium Nitrate
Activated Carbon Coco Amido Propyl Betaine (CAPB) Pearlising Agent Sodium Nitrite
Aluminium Sulphate Coconut Di Ethanolamide (CDEA) Perfumes Sodium Silicate
Ammonium Bicarbonate Copper Sulphate Poly Aluminium Chloride Sodium Sulphate
Ammonium Chloride Di Ethanol Amine (DEA) Potassium Hydroxide Sodium Sulphite
Ammonium Hydroxide Dioctyl Phthalate Potassium Per Sulphate Sodium Thiosulphate 
Bentonite powder Distilled Water Silica Gel Sodium Tri Poly Phosphate
Borax Ferric Chloride Silica Gel Solvent Naphtha
Boric Acid Ferrous Sulphate Soda Ash Starch
Butyl Acetate Flouroscent Dye Sodium Bi Sulphate Talcum Powder
Calcium Carbonate Formaldehyde Sodium Bi Sulphite Tergitol
Calcium Chloride Glycerine (BP/USP) Sodium Bicarbonate Titanium Dioxide
Calcium Hydroxide Hydrated lime Sodium Carbonate Tolyl Triazole
Calcium Hypochlorite Hydrated Lime Sodium Chloride (SALT) Tri Ethanol Amine (TEA)
Carboxy Methyl Cellulose (CMC) Hydrazine Hydrate Sodium Hydroxide  Trichloro Ethylene
Castor Oil Lime powder Sodium Hypochlorite Trisodium Phosphate (TSP)
Caustic Potash Magnesium Chloride Sodium Lauryl Ether Sulphate(SLES) Urea
Caustic Soda – Flakes Magnesium Sulphate Sodium Meta Bi Sulphite Zinc Chloride
Caustic Soda – Prills Mono Ethanol Amine (MEA) Sodium Meta Silicate Zinc Dust

 

PAC Liquid

Partial Hydrolyzed Polyacrylamide PHPA

Packing Size: 
25.00 Kg
Short Description: 
Is a co polymer of anionic character and high molecular weight
  • 7 reads

  • 7 reads

Flocculant Anionic Polymer DAF

Alias: 

CORE SHEL 71325, ANIONIC FLOCCULANT, Hyperfloc AE120

Application: 

This product is use flocclant for  dissolved air flotation, and sludge dewatering of inorganic sludges.

This RXSOL specified product is used to flocculate suspended oil particles in oilfield waters either by adding it directly to alkaline systems, or in the case of lower pH systems, by first neutralizing the product with alkali to produce a water soluble salt solution.
To prepare the water soluble salt solution, add the alkali (NaOH, KOH) slowly to a 2% dilution of the RXSOL DAF  until the pH reaches alkaline 8.0 - 10.0. The product will change from a thin, milky-white liquid to a clear, viscous liquid. The neutralized 2% solution can then be further diluted as required. RXSOL DAF can also be formulated with ethylene glycol. RXSOL DAF functions by reducing the repulsive surface charges on oil droplets and certain organic and inorganic particulates found in produced oilfield waters. This helps promote the formation of a larger floc and improves settling or filtration rates. Due to the wide variability of oilfield waters, the optimum dosage rate should be determined through a series of jar tests for each specific application. RXSOL DAF is often used in conjunction with inorganic coagulants or cationic polyelectrolytes.

Packing Size: 
220.00 Kg.Liq
Using Procedure: 

RXSOL ANIONIC POLYMER FLOCCULANT should be fed via a closed feed system. A closed feed system is defined as a system in which fluid is moved from a closed storage vessel into a treated media without exposure to the atmosphere (except through normal venting or pressure devices).
Emulsion flocculants must be fed following proper makeup procedures. Suitable inversion systems  should  be utilized to allow for adequate inversion and feeding control. The quality of water used to invert the polymer is important. Avoid using plant recycle water or other water sources high in suspended solids, mineral salts and iron, and with a pH either below 6.5 or above 7.8.
A dilution aging tank is highly recommended, with a minimum of 30 minutes aging in order to gain full product activity. Inverting the emulsion flocculant below a concentration of 0.2%, or above a concentration of 1.0%, is not recommended. A positive displacement pump is recommended for feeding the inverted material to the treatment system. In some cases, continuous dilution of pre-inverted flocculant will enhance activity and generate more cost-effective results. Improved performance using dilution water is site specific. To determine if post-dilution is advantageous, feed inverted product through a standard mixing tee to an active dilution water line. The water temperature should be close to ambient and low on suspended solids, mineral salts and iron.

In most cases, inverted flocculant should be fed on the discharge side of the feed pump. There may be isolated cases where the additional mixing rendered by distributing the polymer on the suction side of the pump will yield better program

Note: 

SAFETY AND HANDLING :

RXSOL ANIONIC POLYMER FLOCCULANT  should be handled with responsible care as handling normal chemicals products. When considering the use of RXSOL ANIONIC POLYMER FLOCCULANT  in a particular application, the Material Safety Data Sheet must be reviewed to assure that the intended use can be accomplished safely. All precautions described in the MSDS should be strictly followed when handling this product.

STORAGE :

Keep containers closed and protect from frost and moisture. Low temperatures should be avoided since viscosity increases and pumping problems can occur. When frozen, warm the product slowly to ambient temperature and agitate with a low (<200) RPM mixer. After warming up to 8 -10°C (46-50° F) and re-homogenization by gentle agitation for about two (2) hours, the product can be re-used without loss in efficiency. Nevertheless, freezing should be avoided.When the product has been exposed to heat, the product should be gently agitated while its temperature is allowed to lower to room temperature. After the product is back to room temperature, about two (2) hours of gentle agitation should be sufficient to make the product ready for use. While product performance should not be affected if the product freezes or warms up, some loss in physical stability should be expected. If the product is to be stored for longer than two weeks,i.e., bulk tank storage, periodic agitation of the product will help keep the product fully homogenized and ensure consistent performance.

Related Products: 
ALUMINIUM SULFATE
Flocculant Cationic Polymer DAF
Anionic Polyelectrolyte (RX Floc 100)
Primary cationic Flocculant Sewage Treatment
Sodium Sulphite (sulfite) with Catalyst Liq
Ammonium Persulfate
Secondary Anionic Flocculant Sewage Treatment
Sodium Bisulphite Solution
Polyelectrolyte
Cationic Polymer Liquid
Oil Based Mud Lubricant GLOLUBE
Anionic Polymer Powder
Safety Accessories: 
Goggle
Gloves Disposable
Goggle Chemical Protective
Article News: 
Flocculant manufacturer and supplier in Mumbai, Vashi - Maharastra
FLOCCULANT ANIONIC POLYMER manufacturer
Short Description: 
Effective as a flocculant in various liquid/solid separation applications, such as clarification, dissolved air flotation, and sludge dewatering of inorganic sludges.

#Flocculant_IndiaUAEoman
#AnionicPolymerDAF_DubaiMuscat

Flocculant Anionic Polymer DAF manufacturer and supplier in Mumbai, Gandhidham, Oman Muscat, Fujairah UAE Middle East, Dubai, Sharjah, Abu Dhabi, Ajman, Diera, Chennai, Kolkata, Visakhapatnam, India

ANIONIC polymer

Concrete Pipeline Powder

RXSOL CPLP Concrete Pipeline Lubricant Powder is concrete delivery truck mortar releasing solution.

 

RXSOL CPLP Lubricant helps concrete transport company  to save time to release mortar from vechicle and also helps to keep vehicle  mortar deposition free.

Alias: 

Lubricant for Concrete Pipeline, RXSOL CPLP

Active Matter: 
98-99
Application: 

Concrete pump line inwall is smeared irregularly when pumping, influence result of use, causes pump line to stop up easily, does not reach the effect that mortar moistens pipe,  RXSOL CPLP Concrete Pipeline Lubricant Powder helps as a lubricant to release mortar freely.

Packing Size: 
200.00 Grams
Using Procedure: 

Take Full container / Pouch of RXSOL CPLP Concrete Pipeline Lubricant Powder   in 50 - 75 Ltr of water, Mix Properly to Get Homogenious Light viscous solution. Then use the RXSOL CPLP water mixed slurry solution in PUMP PIPELINE  prior to concreting. its aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Note: 

RXSOL CPLP Concrete Pipeline Lubricant Powder  enhance concrete flow without block in pipe line. Which is resultig not only TIME SAVER but also protect CIRCULATING SYSTEM and PIPE Line heavy maintenance free.

RXSOL CPLP Concrete Pipeline Lubricant Powder's aqueous solution homogeneity is good, leave standstill 9 hours not stratified.The pump line inwall is smeared evenly when pumping, and is effective.

Related Products: 
Cement Cleaner
Cement Remover Gel
CEMENT Additive for Strength
Safety Accessories: 
Super Plasticizer (Admixture)
Retarder Cement Admixture
Concrete Accelerator Fast Setting
Short Description: 
Concrete lubricant for application of used in pipeline of concrete pump

This lubricant profit that is used for pipeline of concrete pump is managed 50 meters, 

Concrete Pipeline Powder manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Concrete Pipeline Powder at a competitive price from us. We have ready stock of Concrete Pipeline Powder in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Lubricant for Concrete Pipeline

  • 836 reads

Lithium Molybdate

Lithium molybdate is used as corrosion inhibitor in LiBr absorption chiller for industrial central air conditioning.

Alias: 

Li2MoO4, Vapour Absorption Chiller

Application: 

Lithium Molybdate Solution chemically acts as Corrosion Inhibitor for Central Air Conditioning chiller system. 

Packing Size: 
25.00 Kg
Using Procedure: 

Lithium bromide as a salt is widely used in absorption and cooling with water. It is used as desiccant in air conditioning system and reagent in organic synthesis.

Related Products: 
BRINE CORROSION INHIBITOR RX
Cooling Treat 2910
Biological Guard Antifouling
Safety Accessories: 
Nitrite Borax RoccorRX NB Liq
AC2 DESCALEX Powder
GLUTARALDEHYDE
Short Description: 
Lithium molybdate is used as corrosion inhibitor in LiBr absorption chiller for industrial central air conditioning.

Lithium Molybdate manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Lithium Molybdate at a competitive price from us. We have ready stock of Lithium Molybdate in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Li2MoO4

  • 787 reads

Diesel Engine LiquiGuard NB

COOLING WATER CORROSION & SCALE INHIBITOR

Alias: 

DEWT NC, Liquid EWT, Cooling water Treatment Corrosion Inhibitor, Jacket Water Inhibitor, NALCO 2000, Nclt diesel, LIQUID Corrosion GUARD 2000, ENGINE JACKET WATER CONDITIONER, GyROCCORRX W.C., Aquafine 103, Care Treat, CWT-NT Chemo, NCT-105 L NORCHEM, 6, MAXIGUARD, Diesel Guard Liq 25 Ltr

Active Matter: 
68-75
Application: 

Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4039-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.

FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.

( Used as a corrosion inhibitor for all ferrous and non-ferrous metals found in water systems )

Packing Size: 
25.00 Ltr.
Using Procedure: 

Refer to technical datasheet.

GENERAL RECOMMENDATION : ( The dosage chart may be used as a guide to adjust treatment to obtain the optimum level.)

Nitrite (as PPM NO2) 0  100-200 300-600 700-900 1100-1300   
RXSOL-40-4039-025 / 1000L 8.0  7.3 7-8 5-7   1.5-3.5

NOTE ::: --   If nitrite level becomes 1440-2400 then doses should be ZERO.

The initial dosage for an untreated system is 8 liters of product per 1000 liters of water. Such a dose will bring nitrite levels over 1200 ppm. Maximum nitrite level is considered to be 2400 ppm. Frequent tests should be carried out in order to maintain pH values within the limit (8.3-10.0), while levels of chloride should be maximum 50 ppm.

Note: 

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4039-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in  water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.

RXSOL-40-4039-025 will react with sludge and in most cases, facilitate sludge gradual removal. On badly fouled systems with oil or scale, a prior degreasing by using DEGREASER HEAVY DUTY or descaling by using DEGREASER HEAVY DUTY, SCALE REMOVER LIQUID or SCALE REMOVER POWDER is highly recommended.
 

 

• Excellent corrosion inhibitor for cooling water

• Minimises metal oxide deposits

• Protects ferrous and non-ferrous metals

• Compatible with glycol-based antifreeze

• Reduces cleaning & maintenance costs

• Cost effective, easy to apply and use

Related Products: 
Hydrotech 3670 Rx
Corrosion Inhibitor Nitrite Borax based
Corrosion Inhibitor
MICRO BIOCIDE Cooling Water
Short Description: 
Highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants , dispersant and buffer solution of non carbonate.Usefull for use in high or low temperature closed cooling water systems for the prevention of

#CoolingWaterTreatmentChemical_IndiaUAEoman
#DieselEngineLiquiGuardNB_IndiaUAEoman
#EngineJacketWaterCorrosionInhibitor_IndiaUAEoman
#CoolingWaterTreatmentCorrosionInhibitor_IndiaUAEoman
#JacketWaterInhibitor_IndiaUAEoman
#EngineJacketWaterCONDITIONER_IndiaUAEoman
#DieselGuardLiquid_IndiaUAEoman
#CareTreatCWT_IndiaUAEoman

Diesel Engine LiquiGuard NB Engine Jacket Water Corrosion Inhibitor manufacturer, exporter and supplier in Navi Mumbai MIDC, Kolkata, Chennai Ennore, Visakhapatnam, Gandhidham, Ajman, Fujairah, Dubai, Sharjah UAE, Abu dhabi Middle East, Barka, Muscat Oman, Canada

Engine Jacket Water Corrosion Inhibitor

Sodium Hypo Chlorite 12-15%

Alias: 

Chloros, Bleach, Fungicide and an Oxidizing Bleach, Twin Oxide Compound A, CAS No:7681-52-9, NaClO, Sodium Hypo Chlorite 12-15% 250 Kg

Active Matter: 
<p> 12 - 15%</p>
Application: 

  • Also used as a disinfectant and germicide , especially in the sterilization of water.

  • It is also used for making wool unshrinkable and in the manufactire of chloroform.

  • For the purpose of disinfection and bleaching  , a weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficientPotable Water Treatment

  • Aquatics and Pools

  • Odor Control/Corrosion Control

  • Food & Beverage Processing

  • Wastewater Treatment

  • Cooling Towers, Inland Power Stations & Industry

  • Irrigation Systems

  • Agriculture/Farming
     

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL:  Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Packing Size: 
250.00 Kg.Liq
Using Procedure: 

A weak soln. ( 1.2 % ) is used. For purifying water
0.02 to 0 .2 % volumetric is sufficient for Potable Water Treatment

SODIUM HYPOCHLORITE

ACTIVE INGREDIENT:

            Sodium Hypochlorite as Chlorine                           : 15%

            Sodium Hydroxide                                                  :   1%

INERT INGREDIENTS:                                                      : 84%

             Total                                                                         100%           

 

General formulation to calculate  how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration. 

                                                                        req'd residual in ppm
  Valume of hypo  =  volume of water  x  (  ----------------------------- )
                                                                           1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add  ?

  • (5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

  • (5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

                                                                                                              req'd residual in PPM
Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )
                                                                                                               1,000,000 x hypo %
  • This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

  • (8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds
Note: 

High-test hypochlorite (HTH) is sold for chlorination of swimming pools and contains approximately 30% calcium hypochlorite. The crystalline salt is also sold for the same use; this salt usually contains less than 50% of calcium hypochlorite. However, the level of active chlorine may be much higher.

Note : Store in cool place

UN No :  1791
IMDG CLASS : 8

PACKING GROUP : III

ODOUR  : IRRITATING , PUNGENT ODOUR

R31: Contact with acids liberates toxic gases

R34: Causes burns

S-PHRASES

S1/2: Keep locked up and out of the reach of children.

S28: After contact with skin, wash immediately with plenty of water

S45: In case of accident or if you feel unwell, seek  medical advice (show the label where possible)

S50: Do not mix with acids

S50: Do not mix with reducing agents

X2: Restricted to professional users.Warning! Avoid exposure - obtain special instructions before use.

EMERGENCY AND FIRST AID PROCEDURES

EYE:

OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.

SKIN:

SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.

INIIALATION:

Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION:

           NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of  carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material

 

Other Related PRODUCTS LINKS :

Textile Hypo Bleach , SODIUM HYPO CHLORITE , Sod Hypo Chlorite conc activeCHLORINE , CHLORINE LIQUID , Calcium Hypo Chlorite Conc active Chlorine , Chlorine Tablet cyanurate , Chlorine Tablets Calcium Based , DYE REMOVER ORG DICHLOR , Dechlorination Soln De-Hypo

Related Products: 
ALKAATUFF HOLD CLEAN
Slip Barrier Coats HOLD BLOCK
Cement Floor Cleaner
COAL REMOVER RX Hold
HBI CARGO Hold Wash Concentrate RX
Sodium Thiosulfate Pentahydrate
Care Chlor RX
DI CHLOR SDIC
Bleaching Liq
Calcium Hypochlorite Granules
Safety Accessories: 
Goggle Chemical Protective
Hand Gloves Chemical resistance
Goggle Chemical Protective
Article News: 
Dealers, suppliers and Exporter for all kinds of acids Chemicals Powder
Sodium Hypochlorite solution chemicals manufacturer and supplier
Alkaline high foam ship hold cleaning detergent supplier in India and Middle East
Sodium thiosulfate supplier
Short Description: 
High-test hypochlorite (HTH) is sold for chlorination of WATER
Information: 

Sodium hypochlorite used for cleaning and disinfection. RXSOL is major manufacturer and supplier of highly purified chlorine bleach. Balancing of sodium hypochlorite ph also plays an important role during cleaning and other uses of sodium hypochlorite. free alkali containt required more neutrailzer during cleaning operation. All safety norms and physical and chemicals properties and  sodium hypochlorite chemical formula are updated in our MSDS of sodium hypochlorite sheet.

 

#SodiumHypo_ManufacturerSupplier
#SodiumHypo_MuscatDubaiMumbai
#Bleach_OmanUAE

Sodium Hypo Chlorite (12-15%) 250 Kg packing manufacturer and supplier in Gangavaram Visakhapatnam, Chennai Ennore, Haldia Paradip Kolkata Buzbuz, Fujairah UAE Middle East, Mumbai, Hazira, Surat, Gandhidham Mundra, Sohar, Barka, Muscat Oman, Nairobi Kenya Africa, Sudan Yemen, Canada

CAS No:7681-52-9 NaClO

FAQ: 
Chlorine Calculation ppm Level

Coconut Shell Based Activated Carbon

Coconut Shell Based Activated Carbon manufacturer and supplier

Alias: 

550812

Active Matter: 
100
Application: 

Activated carbon is useful in drinking water treatment because it acts as an adsorbent , and can effectively remove particles and  organics from water. These organics are of great concern in water treatment because they react with many disinfectants, especially chlorine.
 

The use of granular Activated Carbon in wastewater treatment systems is a proven process for removal of organic compounds. As a tertiary treatment method, carbon adsorption and regeneration have been used to process domestic wastewaters contaminated with industrial wastes of organic origin as well as biologically treated waste waters. Activated Carbon, when contacted with water containing organic material, will remove these compounds selectively by a combination of adsorption of the less polar molecules, filtration of the larger particles, and partial deposition of colloidal material on the exterior surface. The quantity of Activated Carbon required will depend upon the degree of contamination.

Packing Size: 
25.00 Kg Granules
Using Procedure: 

An amorphous from of carbon characterized by high adsorptivity for many gases, vapors, and collodial solids.

Used for water and air purification, solvent recovery, waste treatment, removal of sulfur oxide from stack gases and "clean'' rooms as deodorant, and for air conditioning.

Note: 

Coconut Shell Based Activated Carbon Granual most commonly used for Filteration and decolorization of fruit juice, Also helpful for clarification date syrup.

Related Products: 
Activated Carbon Acid Washed
Activated Carbon Commercial Grade
Activated Alumina Desiccants
Activated Carbon Unwashed
Coal Based Activated Carbon
Activated Carbon with Magnesium Oxide Impregnation 4-8 mm
Activated Carbon Granular GAC
Activated Carbon Charcoal Food Grade
Wood Based Activated Carbon
Anthracite Coal Carbon
MetaSorb Activated Carbon
Short Description: 
Activated Carbon is a very active product with a high proportion of medium and large pores. It is recommended for the adsorption of large quantities of high molecular weight substances.

RXSOL Group of industries popular and certified largest manufacturer & exporter of Superior and Quality activated carbon in India. Activated Carbon Helpfull to provide Decolourisation and Purifications solutions, Air Purification, Water Filtration etc.

WOOD BASED POWDERED ACTIVATED CARBON

WOOD BASED GRANULAR ACTIVATED CARBON

COCONUT SHELL BASED GRANULAR ACTIVATED CARBON

COAL BASED GRANULAR & POWDER ACTIVATED CARBON

PELLETS ACTIVATED CARBON

 

What Is Activated Carbon

Activated carbons are manufactured from coconut shell, peat, hard and soft wood, lignite coal, bituminous coal, olive pits and various specialty materials.

 

Activated carbons are manufactured from coconut shell, peat, hard and soft wood, lignite coal, bituminous coal, olive pits and various specialty materials. Manufactured by chemical or high temperature steam activation, this highly porous adsorptive medium has a complex structure that is composed primarily of carbon atoms. Its network of pores within a rigid carbon skeleton consists of disordered layers of carbon atoms which are linked together by random chemical or carbon bonds.

 

 

 

APPLICATION AREA

 

Air & Gas Treatment

Water Treatment

Pharmaceuticals Industry

Gold Recovery

Food & Beverages

Automotive Industry

Mercury Removal

Biogas Industry

Protective Equipments

Petrochemicals Catalyst

Cigarette Filters

Soil Remediation

Coconut Shell Based Activated Carbon manufacturer, supplier and exporter in Mumbai, Kandla - Gandhidham, Chennai, Visakhapatnam, Kolkata, Dubai, Fujairah, Sharjah, Abu Dhabi, Oman - Muscat.

Gold Purifier Carbon

SODIUM HYDROXIDE ANHYDROUS

Packing Size: 
50.00 Kg.PWD
Short Description: 
SODIUM HYDROXIDE ANHYDROUS
  • 170 reads
stock-clearance.png