Coolant Glycol Antifreeze-27

Corrosion Inhibitor for Diesel Cooling Water Treat

Corrosion Inhibitor for Diesel Cooling Water Treatment - RXSOL CIDC is a unique formulation with organic Corrosion Inhibitors, Anti-Scalant for use in closed cooling water systems, for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid, also used as a corrosion inhibitor ( Protects all the metals including cast iron, mild steel, copper .)

Alias: 

E.W.T. Inhibitor 9-131c, Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC

Active Matter: 
45-50
Application: 

The stable oxide film that is formed by RXSOL CIDC prevents corrosion caused by the electrolytic action between dissimilar metals used in the system .RXSOL CIDC has been field tested and found to have no detrimental effects on non-metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these’ systems.

Application-Dg*

Sets Internal combustion engines closed circuit cooling system compressor cooling system. RXSOL CIDC incorporates superior corrosion inhibitors to prevent corrosion works by free of scale deposits.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval.

Note: 

In cases where systems are contaminated with oil and/or scale, they should be cleaned before starting to apply RXSOL CIDC.There are suitable RX BRAND products to carry out the cleaning. Degreasing should be carried out using RXSOL-20-2002-025 and descaling by using RXSOL 1008.

Short Description: 
Anti-Scalant for use in closed cooling water systems , for preventing corrosion and scale Formation in Internal combustion engines, compressor cooling system, DG -set at high or low temperature. It is a concentrated liquid , also used as a corrosion inhib
Information: 

 Water-soluble corrosion inhibitors FOR MTU engine, RXSOL CIDC specialized product for Marine and shipping industrial use. Major supplier in all INDIAN and UAE Middle East coastal.  RXSOL CIDC Prolong the life of equipment by keeping scale and corrosion free.

RXSOL CIDC Water-soluble corrosion inhibitors FOR MTU engine.

Advatages : -

1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL CIDC is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product accidentally overdoses, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.

2. Improves generating cooling efficiency by maintaining a clean heat transfer

3. Corrosion protection by using a superior corrosion inhibitor.

4. Reduced maintenance and downtime

5. Compatible with Coolants / Antifreeze solution / Glycol .

6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Marine Diesel Engine specialized corrosion inhibitor.

NOTE : Initial dosage for an untreated system is 9 litres of RXSOL CIDC / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine, life add RXSOL CIDC every 500 -6500 km. or 250 to 300 hours of running time or every 2-month interval.

Marine Chemicals

Boiler water treatment chemicals

Fuel oil treatment chemicals

Tank cleaning chemicals

Test kits and reagents

Cooling water treatment chemicals

Oil spill dispersant

Electric cleaning chemicals

Air cooler cleaning chemical

Antiscalants

Defoamers /Surfactants

Oxygen Scavengers

Custom Blending of Water Treatment Chemicals

Water Treatment Chemicals - Raw 

Coagulants

Flocculants

Disinfectants

Corrosion Inhibitors

RXSOL WATER TREATMENT CHEMICALS :

1. Sodium Chloride salt for softeners

2. Calcium hypochlorite 65-70%

3. Ferric Chloride 40% 

4. Sodium metabisulphite powder

5. Sodium Bromide.

6. Bromine Tablets suppliers in uae, Dubai, Sharjah.

7. Sodium Nitrite.

8. Sodium Molybdate

9. Phenolphthalein White

10. Caustic Soda liquid, Prills and flakes.

11.Ferrous Sulphate.

12.Poly Aluminium Chloride (PAC). 

13.Calcium Nitrate.

14.Calcium Chloride.

15.Sodium Sulphite.

16.Silica Sand and Gravel filtration media.

17.Birm and Anthracite.

18.Hydrazine Hydrate.

19.Carbohydrazide liquid and powder.

20.Cobalt Sulphate.

21.Zinc Chloride and Zinc Sulphate

22.Borax Pentahydrate and Borax Decahydrate

23.Citric acid solution and powder.

24.Sodium Hexameta phosphate. 

Boiler Water Treatment Chemicals

Precleaning & Passivation

Scale Inhibitors

Corrosion Inhibitors

pH Booster (Inorganics & Organics)

Descaling Chemicals (online / offline)

Sludge Conditioner

Condensate Treatment Chemicals

Amine Based treatment Scale Inhibitors

 

Corrosion Inhibitors

Biocides

Biodispersant

Dealkalisers

Descalants

Cooling Water Treatment Chemicals

Chiller Water

Treatment Chemicals

Pre cleaning Chemicals

Anticorrosion Treatment

Antimicrobial Treatment

STP Treatment Chemicals

Biocultures

Deodorants

Biomass Setting Agents

Disinfectants

Defoamers

Nutrients

Enzymes

ETP Treatment Chemicals

Coagulant

Flocculant

Decolorant

Dewatering Aids /

Filter Aids

Bioculture – Anaerobic & Aerobic

Deodorants

De-Emulsifiers

Polymers for Filter Press /

dewatering Evaporator Antiscalants

Water Treatment Chemicals

Biocides

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Dust control products

Membrane treatments

Metal passivators

Monitoring and control systems

Odor inhibitors

Oxygen scavengers

Scale inhibitors

Sludge dewatering polymers

MUNICIPAL water treatment chemicals

Coagulants/flocculants

Defoamers

Feed / make down equipment

Membrane treatments

Mixing equipment

Odor inhibitors

Scale inhibitors

Sludge dewatering polymers

MINING & MINERAL PROCESSING

Coagulants/flocculants

Dust control products

Filtration aids

Grinding aids

Monitoring and control systems

Non-sulfide flotation reagents

Rheology modifiers

Scale inhibitors

Specialty dewatering aids

Viscosity modifiers

CHEMICAL PROCESSING

Biocides

Cleaners

Coagulants/flocculants

Corrosion inhibitors

Defoamers

Membrane treatments

Monitoring and control systems

Odor neutralizer

Oxygen scavengers

RO Membrane Treatment Chemicals

RO Pre -Treatment Chemicals

Membrane Antiscalants

Raw water RO (Food grade)

Effluent Recycle RO

Desalination Plants

Membrane Antioxidants

Membrane Cleaning Chemicals

Membrane Preservatives

Online / Offline Biocides

pH Boosters (Food Grade)

Taste Enhancers for RO Product water

Sanitizing Products for PSF, ACF Filter

Media and Pipelines.

Sugar Process Chemicals

Boiler Treatment Chemicals

Juice Clarification Aids

Syrup Clarification Aids

Mill Sanitation Chemicals

Viscosity Reducer

Anti Foamer / Defoamer

Evaporator Antiscalant & Descalants

Sugar Refining Compounds

Color Precipitants

Paper Process Treatment Chemicals

Anti Slimicides

Defoamers

Chemicals For Krofta Applications

Boil –out Chemicals

Vacuum Pump Antiscalant

ETP Chemicals

Water-soluble corrosion inhibitors FOR engine water treatment

Antifreeze Liquid

Packing Size: 
11.00 Ltr.
Short Description: 
Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and

Coolant Green RXSOL G 93-94

Coolant Green RXSOL G 93-94 manufacturer, supplier and exporter. 

Alias: 

Glayscor G93-94, Inhibitor for Aluminium Alloys AND YELLOW METALS, COOLANT, VOLVOPENTA GREEN

Application: 

Ethylene glycol-based contain corrosion inhibitor ingredients along with additives, such as silicates, borates and phosphates. This is the reason why Coolant Green RXSOL G 93-94 resulting very good cooling effect towards reunning motors with extra protection of corrosion towards the system.

Packing Size: 
20.00 Ltr.
Using Procedure: 

What is difference between Green coolant and orange coolant ?

Green and Orange antifreeze are ethylene glycol-based coolant. Presence of corrosion inhibitor ingredients or additives making major difference between orange and green. As orange antifreeze contains organic acids while green antifreeze has additives, such as silicates, borates and phosphates.

Short Description: 
Inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and

Coolant Green RXSOL G 93-94 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Coolant Green RXSOL G 93-94 at a competitive price from us. We have ready stock of Coolant Green RXSOL G 93-94 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Green Coolant

ISO PROPYL ACETATE

Packing Size: 
200.00 Kg
Short Description: 
ISO PROPYL ACETATE

Air Cooler Cleaning Chemical

Alias: 

Mite ACC, RXSOL 79101 ACC, Care Clean ACC, Air Cooler Cleaner Merichem, Cleaner 622, EAZY ACC, SEA SHIELD ACC 79101, Air System Cleaner, Air cooler Cleaner AC cleaner 25 Ltr

Application: 

During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dust and carbonaceous deposit, which will affect cooler efficiency and damage the system.

RXSOL-54-1048-020 ( www.rxmarine.com/safe-acid-descalex-liquid-20-ltr ) is a powerful dissolving agent of calcium carbonate. Therefore, it is better to use RXSOL-54-1048-020  to do circulating cleaning at an early stage before the scales build up and block the tube, or regular cleaning is recommended as well. It is impossible to do a circulating cleaning when the tube is completely blocked.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Dirt attached on air-side fins of air coolers are a mix of carbonaceous particles such as soot and oil mist of unburned fuel components. 
Carbonaceous particles can be removed by Alkaline Cleaners Part No. RXSOL-16-1040-025 ( www.rxmarine.com/alkaline-air-cooler-cleaner ) and oil mist can be removed by oil based cleaners. However, it is very difficult to remove the mix of these substances. If you use an alkaline cleaner, oil will repel the water based alkaline cleaner; if you use oil based cleaner, carbonaceous particles will get in the way and stop oil from being removed.

This cleaners designed to remove both carbonaceous and oil simultaneously. An effective cleaning method is to immerse one side to remove the loose stains first, and then immerse the other side. This method can efficiently remove dirt and prevent swollen dirt peeled from fins from blocking the spaces between fins.

Dirt in tubes of seawater side

White scales attached on the seawater side of air coolers of many vessels. We found that in most cases, the main component of the scales is calcium carbonate and there is also a small amount of calcium sulfate. Therefore in most cases, if you dissolve the calcium carbonate the scales will be removed.

However, if the amount of scales is large enough to block the tube, the cylindrical scale will usually have calcium carbonate on the outside (the side that is in contact with tube) and calcium sulfate in the center (part that seawater passes through). Calcium sulfate is easier to be formed when the temperature goes higher.

When the amount of scales increases, the contact area of scale and cleaner is very small and a longer time of dissolution is required. Calcium sulfate cannot be dissolved by an acid cleaner.

Note: 

FREE from ACID
Polymer based cleaner, which will result extra shinning and smooth feeling on surface.

Multiple action of RXSOL-16-0009-025 increases its popularity, And this product also can be use for DEGREASING and Carbon removal action.

Very popular and Effective cleaner for air coolers, scavenging air systems and turbo chargers of diesel engines, Coils of AHU, FCU, Air Conditioners (Indoor and Outdoor), Car Condenser and Radiator, Air Cooled Chillers, Air Cooled Condensers, Air Cooler Tube Bundle etc. 

Short Description: 
ACC9 AC coil cleaner is powerful solvent emulsion cleaner, easily dissolves soiled oil and grease deposit. Also helpful to clean all types of engine parts, turbo chargers of diesel engines. During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dus
Information: 

ACC9 is very effective to clean and dissolve oil, grease and carbon residues from machinery parts of air coolers, turbochargers and scavenging systems. We are keeping ready stock of materials at Mumbai, Surat, Gandhidham - Kandla Deendayal , Mundra, Manglore, Visakhapatnam, Chennai - Ennore, Kolkata - Haldia, Fujairah, Dubai - Sharjah. Proper cleaning of AIR COOLER  not only cooling efficiency can be improved but also Fire hazards can be minimised as build up of grease and oil residues are helpful to transmit fire from one point to others. Our continious work in chemicals field help us to add strong emulsifying agents in our Air cooler cleaning chemical which acts as penetrating agent as well as cleaner to  remove grease and mud part created with mixture of mineral oils, grease, carbon soot  from air coolers and turbocharger.

#AirCoolerCleaningChemicals
#AirCoolerDetergent
#AirCoolerCleaner_manufacturerSupplier

Air Cooler Cleaning Chemical manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Barka, Ghala, Muscat Oman, Kenya Africa. Get the best quality of Air Cooler Cleaning Chemical at a competitive price from us. We have ready stock of Air Cooler Cleaning Chemical in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

How to Clean Air Cooler?

Air Cooler Detergent Cleaner Formulated to clean remove heavy deposited oil, grease, and carbon and mud deposits from air coolers and scavenging systems. 3 Ltr of Concentrated Cleaner can cover heavily deposited contaminated cooler surface area. 

DOSE Air Cooler Cleaning  Chmeical Mixing Ration with Water : 1 Part Concentrate COOLER CLEANER with 3 PARTS FRESH WATER. 

Note : If condition of COOLER is heavily deposited / contaminated then repeat the injection process 2-3 times.

After cleaning of EMULSIFIED deposits, Rinse the system with FRESH WATER.
 

SPRAY METHOD by HAND SPRAY :
 

 

First of all STOP AC ENGINE, and Disconnect from POWER SUPPLY.

Then spray on all coil CONCENTRATE Air Cooler Cleaner, And after 1 Hours use PRESSURE Water Jet as per the requirement ti remove all greasy mess and loose particle. And flush the system through DRAIN VALVE. If necessory, repeat the same PROCESS to get satisfaction and optimum cleaning result.

 

Typical Soak Method

USE PLASTIC BATH TUB and dip all machine parts to remove HEAVY DEPOSITED carbon and oil grease. Wait for minimum 2 - 4 hrs then RINSE the parts by using PRESSURE WATER JET.

 

Note : Must read instruction of ENGINE MANUFACTURE manual.

Powerful AC coil cleaner

ETHYLENE GLYCOL

Alias: 

ETHYLENE GLYCOL 25 Ltr

Application: 
PRODUCT NAME  : ETHYLENEGLYCOL
CAS number  : 107-21-1
UN number     :  
Formula   : CH2OHCH2OH
Odour    : ODOURLESS
Solubility in water    : COMPLETE
Density    : 1.115 at 20 oC
Boiling point       : 197      oC
Melting point    : -13  oC
Viscosity    :  
Flashpoint   : 116  oC
Explosive limits   : 3.2 – 28 Vol%
Vapour pressure   : .07 mbar at 20 oC
Skin absorption/irritation  : YES
TLV       Country  NL                Year  1995  : 10 ppm                 26        mg/m3
Pollution category    1994 : D
Packing Size: 
25.00 Kg.Liq
Using Procedure: 

Clear, Colourless, Syrupy liquid which lowers the freezing point of water. odorless and soluble in water, alcohol and acetone. Hazard: Toxic by ingestion and inhalation.

 used as a coolant antifreeze, asphalt emulsion paint, heat transfer agent, brake fluid, solvent, or foam stabilizer.

Short Description: 
Clear, Colourless, Syrupy liquid which lowers the freezing point of water. odorless and soluble in water, alcohol and acetone. Hazard: Toxic by ingestion and inhalation.

ETHYLENE GLYCOL manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of ETHYLENE GLYCOL at a competitive price from us. We have ready stock of ETHYLENE GLYCOL in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Glycerine

Glycerol is a simple polyol compound. It is a colorless, odorless, viscous liquid that is widely used in pharmaceutical formulations. Glycerol has three hydroxyl groups that are responsible for its solubility in water and its hygroscopic nature.

Alias: 

Glycerin, Glysanin, Glyceritol, Osmoglyn, Propanetriol, Glycerol, Glyrol, Glycyl alcohol, 1,2,3-Propanetriol, Trihydroxypropane

Application: 

Pure Vegetable Glycerine is an outstanding moisturizer and skin cleanser that also provides softening and lubricating benefits. It's hypoallergenic and easily soluble in water, making it suitable for use in all of your favorite cosmetic applications. Pure Vegetable Glycerine has a long shelf life and does not easily oxidize. It is a natural product derived from 

Packing Size: 
30.00 Kg.Liq
Using Procedure: 

Clear colourless, odorless, syrupy liquid. Combustible and has low toxicity. Extracted from pickel steel, or waste sulfuric acid oxide of titanium. Mainly used for corrosion control of the seawater side of a condenser or for water and sewage treatment.

Glycerol was historically used as an anti-freeze for automotive applications before being replaced by ethylene glycol, which has a lower freezing point. While the minimum freezing point of a glycerol-water mixture is higher than an ethylene glycol-water mixture, glycerol is not toxic and is being re-examined for use in automotive applications

Short Description: 
Glycerol is a simple polyol compound. It is a colorless, odorless, viscous liquid

Glycerine manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Glycerine at a competitive price from us. We have ready stock of Glycerine in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Sodium Sulphite

Our group division company is a leading manufacturer of Sodium Sulphite, Sodium MetaBiSulphite and SodiumBiSulphite. We have ready stock available at our godown at Mumbai, Kolkata, Chennai, Gandhidham, Visakhapatnam, FUJAIRAH, Dubai, Sharjah, Muscat Oman, Nairobi Kenya, Canada

Alias: 

CAS NO: 7757-83-7, Na2SO3, Sodium Sulphite sulfite Anhydrous, Sodium Sulfite

Active Matter: 
98.5
Application: 

Sodium sulfite is primarily used in the pulp and paper industry.

It is used in water treatment as an oxygen scavenger agent, to treat water being fed to steam boilers to avoid corrosion problems.

In the photographic industry to protect developer solutions from oxidation and (as hypo clear solution) to wash fixer (sodium thiosulfate) from film and photo-paper emulsions.

Packing Size: 
50.00 Kg.PWD
Using Procedure: 

In textile industry as a bleaching, desulfurizing and dechlorinating agent and in the leather trade for the sulfitization of tanning extracts. 

It is used in chemical manufacturing as a sulfonation and sulfomethylation agent. 

It is used in the production of sodium thiosulfate. It is used in other applications, including froth flotation of ores, oil recovery, food preservatives, and making dyes.

Note: 

The storekeepers ensure that the chemicals are stored in sealed packaging so that these remain free from contamination & moisture during the transit.

Short Description: 
Sodium sulphite is used as Reducing agent, Antibrowning agent, antioxidant, Flour treatment agent also as preservative in biscuit industries. In textile as a bleaching,In leather for tanning extracts, also in photographic industry etc

Also we are keeping ready stock of these products :

SODIUM SULPHATE 99% WHITE POWDER CRYSTAL 50 KG BAG
PHOSPHORIC ACID 85% WHITE LIQUID POWDER
Caustic Soda Lye
HYDROGEN PEROXIDE 50% LIQUID 35 KG CARBOY PACK
CITRIC ACID 99% POWDER
caustic soda flakes
BLEACHING POWDER
SODIUM NITRATE
ACETIC ACID

EDTA Disodium 

Calcium chloride - Powder & Prills

Ammonium sulphate - White & Light Yellow

Sodium Sulphate 

Boric Acid 

Copper sulphate 

Sodium Thiosulphate 

Potassium chloride powder 

Sodium Sulphite - 90% & 96%

Synonym: Sulfurous Acid, Disodium Salt 

Chemical Name: Sulfurous acid, Disodium salt 

Chemical Formula: Na2So3

#SodiumSulphite_UnitedArabEmiratesDubai
#SodiumSulphite_MuscatOman
#SodiumSulphite_MumbaiVizagKolkataChennaiGandhidham

Our range includes Sodium Thiosulphate, Sodium Acetate, Sodium Metabisulphite, Sodium Bisulphite, Sodium Sulphite Anhydrous, Ammonium Sulphate, Ammonium Chloride, Magnesium Sulphate, Sodium Phosphate (Mono / Di / Tri) etc.

Sodium Metabisulfite supplier and exporter.  Sodium Metabisulphite also called sodium pyro sulphite. Food grade of Sodium sulphite is used as preservative agent, reducing agent, Antibrowning agent, antioxidant, flour treatment agent also as preservative in biscuit industries.

We are keeping ready stock of Sodium Metabisulfite in 25 Kg and 50 Kg pack. And we are one of popular sodium metabisulphite supplier in Mumbai, Kandla - Gandhidham, Chennai - Ennore, Visakhapatnam, Kolkata, Fujairah, Dubai,  Sharjah, Abu Dhabi, Sodium Sulphite supplier in Barka Ruwi Muscat Oman

Sodium Metabisulfite is White crystals or crystalline powder having an odour of sulfur dioxide
 

HOW to TEST purity of Sodium Sulfite?

PURITY TESTS
Reagents: Hydrochloric acid, hydrazinium sulfate, standard selenium solution (100µg Se/ml)

Procedure

Weigh 2.0 ± 0.1 g of sample and transfer to a 50-ml beaker. Add 10 ml water, 5 ml hydrochloric acid and boil to remove SO2.
Into a second beaker, weigh 1.0 ± 0.1 g of sample, add 0.05 ml standard selenium solution and proceed as above.
To each beaker add 2 g hydrazinium sulfate and warm to dissolve. Let stand for 5 min. Dilute the contents of each beaker to 50 ml in a Nessler tube and compare the colour of the two solutions. The sample should be less pink than the sample with the added standard.

METHOD OF ASSAY

Weigh 0.2 g of the sample to the nearest mg, add to 50.0 ml of 0.1 N iodine in a glass-stoppered flask, and stopper the flask. Allow to stand for 5 min, add 1 ml of hydrochloric acid, and titrate the excess iodine with 0.1 N sodium thiosulfate, adding starch TS as the indicator. Each ml of 0.1 N iodine is equivalent to 4.753 mg of Na2S2O5.

Sodium sulfite Na2SO3

Coolant Green RXSOL G 93-94

DIESEL ENGINE WATER TREATMENT  Anticorrosive coolant SUITABLE FOR ALUMINIUM, ALLOYS AND YELLOW METALS

Alias: 

Glayscor G93-94, Inhibitor for Aluminium Alloys AND YELLOW METALS, COOLANT, VOLVOPENTA GREEN, Glysacorr G93, Anticorrosive, Green Glycol

Active Matter: 
93-98
Application: 

At concentration of 10% by volume, Coolant Green RXSOL G 93-94 affords excellent protection against cavitation and corrosion to all metal and alloys which are used in cooling system, such as aluminium, ferrous and yellow metals.

Packing Size: 
25.00 Ltr.
Using Procedure: 

The coolant should be prepared with water that is clean but not too hard. The following types of water are unsuitable: sea water,mixture of sea water and fresh water, salt water and industrial waste water. The analytical values of the water should be within the following limits :
Water hardness   : 0 -    100 ppm
Chloride contents: max 100 ppm
Sulphate contents: max 100 ppm
The water must be treated by suitable means if it does not fulfill these requirements, i.e. by adding softened, or distilled or deionized water. Excessive sulphate or chloride contents can also be reduced by adding distilled or deionized water.

Note: 

VARIOUS GRADE OF COOLANT

Antifreeze Coolant Liquid Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and RXSOL-16-4020-020

 

Coolant 20 Ltrs inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4004-020

 

Coolant 25 Ltrs Useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. RXSOL-40-4004-025

 

Coolant 210 Ltrs inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4004-210

 

Coolant Extended Life RXSOL ELC Especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. RXSOL-40-4016-025

 

Coolant Green RXSOL G 93-94 Inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4021-025

 

Coolant Extended Life RXSOL ELC Suitable for high speed coolant pump, Especially useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. RXSOL-16-4016-210

 

Coolant 10 Ltrs inhibitor concentrate chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4004-010

 

Coolant Green RXSOL G 93-94 inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4021-020

 

Coolant Green RXSOL G 93-94 inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and RXSOL-40-4021-210

 

Coolant Premix Redcool premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) helps to i RXSOL-40-4043-025

 

Radiator Coolant 20% Conc. Suitable to add to the cooling water of internal combustion engines for excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks, ships and lokomotives. RXSOL-40-4045-025

 

Radiator Coolant 20% Conc. Suitable to add to the cooling water of internal combustion engines for excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks, ships and lokomotives. RXSOL-40-4045-210

Short Description: 
Inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals and

Coolant Green RXSOL G 93-94 Green Glycol Manufacturer, exporter and supplier in India Mumbai, Gandhidham, Surat Hazira, Vizag Visakhapatnam, Chennai Ennore, Kolkata Haldia, Paradip, UAE Middle East Fujairah, Sharjah, Dubai, Ajman, Muscat Sohar Barka, Oman, Canada, Mombasa, Kenya, Uganda Africa, Sudan, Yemen

Green Glycol

PROPYLENE GLYCOL Barrier Fluid

PROPYLENE GLYCOL Barrier Fluid supplier and exporter. Water Propylene Glycol MIXTURE, 50/50 used as a BARRIER FLUID.

Alias: 

Barrier fluid, Propylene Glycol + Water mixed in 50:50 % ratio

Application: 

Water Propylene Glycol MIXTURE, 50/50 used as a BARRIER FLUID

Packing Size: 
220.00 Kg.Liq
Short Description: 
Water Propylene Glycol MIXTURE, 50/50 used as a BARRIER FLUID

PROPYLENE GLYCOL Barrier Fluid manufacturer and supplier in Mumbai, Kandla, Kolkata, Vishakhapatnam, Chennai, India. Premium Quality of PROPYLENE GLYCOL Barrier Fluid supplier in Dubai, Abu Dhabi, Sharjah, Ajman, Fujairah, Middle East UAE. Buy PROPYLENE GLYCOL Barrier Fluid directly from manufacturer exporter in Muscat Barka Salalah Sohar Oman, Kenya Nairobi Mombasa Africa, Canada.

#PROPYLENEGLYCOL_BarrierFluid
#BarrierFluid_DubaiSharjah
#BarrierFluid_MuscatOman

PROPYLENE GLYCOL Barrier Fluid manufacturer and supplier in India UAE Oman Canada - Mumbai, Kandla, Chennai, Kolkata, Gandhidham Kandla, Vizag Visakhapatnam, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Barka Oman, Canada

Water Mixture Coolant

stock-clearance.png