Coolant Glycol Antifreeze-27

Aqua Clean Tuff High Foam

Aqua Clean Tuff liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is - Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

Alias:

Aqua Tuff High Foam Ship Hold cleaning Alkaline Detergent, CarecleanWAF, Waterbased Alkaline Foam, Alkaline Detergent Heavy Duty, APEX 480XF High Foam, Aquatuff High Foam 220 Ltr

Active Matter:

45-50

Application:

Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aqua Clean Tuff CLEANER plays very important role in washing down with use of chemicals. Aqua Clean Tuff classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Packing Size:

220.00 Kg.Liq

Using Procedure:

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using Aqua Clean Tuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1: Spraying the Aqua Clean Tuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.

After the Aqua Clean Tuffv has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the Aqua Clean Tuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of Aqua Clean Tuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of Aqua Clean Tuff in correct dosages is half the job done.

General Cleaning :- Aqua Clean Tuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination Aqua Clean Tuff CLEANER should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of Aqua Clean Tuff to a bucket of water. The Aqua Clean Tuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the Aqua Clean Tuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, Aqua Clean Tuff is not recommended for washing machines.

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.

Note:

Aqua Clean Tuff is absolutely free along with the purchase of Slip Barrier Coat - Hold block materials. Aqua Clean Tuff Free 1000 Ltr against 1000 Ltrs purchase of Slip Barrier Coat Plus at our Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf.

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames, beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds, Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times.

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept, scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

Then Cleaning and sweeping coal cargo from the hold as maximum possible by HELPER / Crew member

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove all odour and later rinsed with fresh water

Related Products:

COAL REMOVER RX Hold

Cement Remover RX Hold

Metal Stain Rust Remover

Lime Remover HD

Safety Accessories:

Vinyl Gloves (1box =100pcs)

Goggle Chemical Protective

Chemical Protective Suit

Article News:

SHIP CARGO HOLD CLEANING DETERGENT supplier in India UAE Oman

Short Description:

Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. Stock available at - Kandla, Mumbai, Ennore - Chennai, Visakhapatnam - Gangavaram, Kolkata, Haldia, Fujairah

Aqua Clean Tuff for bulk carrier cargo hold cleaning alkaline detergent, Other then Aqua Clean Tuff cargo hold cleaning chemicals lime washing chemicals for cargo holds and pet coke cargo hold washing detergent also popular for specificed lime and and pet cargo. We are also keeping ready stock of cement hold cleaning chemicals, Hold Block - Slip polymer Barrier Coat, Hold Wash etc...

Suitable hold cleaner plays important role to clean ship hold on time. Slection of cleaner always be wise decision to save time and perfectness on cleaning. Aqua Clean Tuff HOLD CLEANING ALKALINE DETERGENT - Alkatuff is one of popular high foam alkaline cleaner which is also treated as versatile cleaner as well as plays role to neutralize acidic residue created by cargo on contact with moisture. Cement remover is also specialized product for cement wash, coal remover, lime remover, Bilge coat, Gypsum remover, PCS hold clean, alkaline cleaner, Muriatic Acid, Sodium Hypo Chlorite, Pet coke remover, Slip polymer Barrier Coat Hold Block etc... Some times we observed that presence of Sea voyage cleaner on board also plays important role to degrease oil and soiled mass from surface. And Metal clean bright helps to remove rust from open hold surface area and also effective to dissolve rust stain from painted surface.

Cargo Product	Product Nature	Characteristics
Sulphur	Alkaline Cleaner	Alkaline Cleaner, Aqua Clean Tuff, Holdbrite
Anthracite - Hard Coal	Alkaline Cleaner	ALKAATUFF High Foam
Bauxite	Alkaline Cleaner	ALKAATUFF High Foam
Bentonite	Alkaline Cleaner	ALKAATUFF High Foam
Chrome Ore	Alkaline Cleaner	Alkaline Cleaner, Aqua Clean Tuff
Clay	Alkaline Cleaner	Alkaline Cleaner, Aqua Clean Tuff
Dolomite	Alkaline Cleaner	ALKAATUFF High Foam
Fluorspar - Calcium Fluoride, Fluorite	Alkaline non foaming cleaner	ALKAATUFF High Foam
Gypsum - Calsium Sulfate, Mineral White	Acidic Cleaner	Metal CLEAN Bright
Iron Ore Pellets	Acidic Cleaner	Metal CLEAN Bright
Lime Sand, Lime Stone, Calcium Carbonate	Acidic Cleaner	Metal CLEAN Bright
Magnesite Magnesium Carboante	Acidic Cleaner	Metal CLEAN Bright
Magnetite IRON BLACK	Alkaline Cleaner	ALKAATUFF High Foam
Magnese Ore	Alkaline Cleaner	ALKAATUFF High Foam
Zinc	Alkaline Cleaner	ALKAATUFF High Foam
Lead	Alkaline Cleaner	ALKAATUFF High Foam
Copper	Alkaline Cleaner	ALKAATUFF High Foam
Pyrite Iron Disulfide, Iron Pyrite, Pyrox	Alkaline Cleaner	ALKAATUFF High Foam
Phosphate Rock	Alkaline Cleaner	ALKAATUFF High Foam
Quartz, Silicone Dioxide, stone	Alkaline Cleaner	ALKAATUFF High Foam
Talk, Magnesium Talc, Soapstone	Alkaline Cleaner	ALKAATUFF High Foam
Vanadium Ore	Alkaline Cleaner	ALKAATUFF High Foam
Aluminum Dross	Alkaline non foaming cleaner	ALKAATUFF High Foam
Ferro Alloys	Acidic Cleaner	Metal CLEAN Bright
Granulated Slag	Acidic Cleaner	Metal CLEAN Bright
Hot Briquetted Iron HBI	Acidic Cleaner	Metal CLEAN Bright
Magnesite, Magnesium Oxide	Acidic Cleaner	Metal CLEAN Bright
Millscale Iron ORE	Acidic Cleaner	Metal CLEAN Bright
PIG IRON	Acidic Cleaner	Metal CLEAN Bright
Zinc Ashes	Alkaline foaming cleaner	ALKAATUFF High Foam
Zinc Dross	Alkaline foaming cleaner	ALKAATUFF High Foam
Zinc Residues	Alkaline foaming cleaner	ALKAATUFF High Foam
Brown Coal Briquettes, Lignite Brown Coal briquetties	Alkaline Cleaner	ALKAATUFF High Foam
Calcined Petroleum Coke	Alkaline Cleaner	ALKAATUFF High Foam
Coal, COKE, Petcoke - Petroleum coke	Alkaline Cleaner	ALKAATUFF High Foam
Castor Beans	Alkaline Cleaner	ALKAATUFF High Foam
Copra Dry	Alkaline Cleaner	ALKAATUFF High Foam
Fish Meal	Alkaline Cleaner	ALKAATUFF High Foam
Peat Moss	Alkaline Cleaner	ALKAATUFF High Foam
Seed Cake, Solvent Extracted	Alkaline Cleaner	ALKAATUFF High Foam
Soya Beans	Alkaline Cleaner	ALKAATUFF High Foam
Sunflower Seed	Alkaline Cleaner	ALKAATUFF High Foam
Wheat	Alkaline Cleaner	ALKAATUFF High Foam
CEMENT	Acidic Cleaner	Cement Remover, Metal clean Bright, Descaing
Cement Clinker	Acidic Cleaner	Cement Remover, Metal clean Bright, Descaing
Fly Ash	Alkaline Cleaner	ALKAATUFF High Foam

Cargo Hold Cleaner, Bulk Hold cleaning etergent, Chemical Agent for hold cleaning, Hold Cleaning Kits detergent

Importance of Alkaleen Safety Liquid / Aqua Clean Tuff Cargo hold cleaner for coal and pet coke:

Alkaatuff High foam and Aqua Clean Tuff / Alkaleen Safety Liquid cleaner is most common marine cleaning chemicals for cargo hold cleaning after coal and pet coke.

Two Major Benefit of cleaning of Pet Coke:-

Pet coke residue contains oil content, which is creating more difficulties during the cleaning operation. Aqua Clean Tuff high foam and one of our specialized product called Alkaleen Safety Liquid which is absolutely non-hazardous and biodegradable cleaner.

Petcokes also have sulphur content which is the main cause of corrosion due to its electrochemical corrosion mechanism. In presence of moisture and sulfur metal surface charges as anodic and damaging the hold paint due to electrical ion charges. Here presence of Alkaleen Safety Liquid / Aqua Clean Tuff increasing the alkaline effect and neutralizes the effect of Sulphur.

Ship marine hold cleaning chemicals

Aqua Clean Tuff most suitable for cargo hold and tank cleaning.

ALKAATuff High Foam CLEANER plays very important role during ship hold cleaning , Its high foam abilityincreasing ALKAATUFF cleaning power on the vertical surface, As liquid product can't sustain on the vertical surface while HIGH composite FOAM can sustain on the surface which is resulting from good cleaning effect.
Extra foaming is major features which is differentiating ALKAATUFF high foam to general ALKAATUFF.

Aqua Clean Tuff using procedure and cleaning method :
1st Step Cleaning of extra and excess loose particle:::
Before applying Aqua Clean Tuff on hold surface, Makes sure extra loose cargo particle should be removed manually or Air blown method. Then cleaning procedure can be followed either by high foam machine or Manual.
2nd step is for Mixing and dilution of ALKAATuff High Foam CLEANER:::
If cleaning step is with HP machine ( High Pressure ), Then mix concentrated ALKAATUFF high foam with fresh water, it can be diluted 1 Ltrs Aqua Clean Tuff CLEANER with 4 to 5 Ltrs Fresh water.

If cleaning step followed by hand spray, Then apply Aqua Clean Tuff neat on the surface. Approx 1 ltr covers 10 to 12 square meter.

3rd Step final procedure:::

Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80 - 90 degree. Rinsing procedure can be repeated 1 to 3 times if required for Cargo Tank and Cargo Hold Cleaning.

Aqua Clean Tuff supplier in Mumbai, Nhava Seva, Pirpav, Surat - Hazira, Kandla - Gandhidham, Sikka - Mundra, Manglore - Goa, Vizag - Visakhapatnam, Gangavaram, Kakinada, Chennai - Ennore, Kolkata, Haldia, Paradip, Buj buj, Dubai - Sharjah, Fujairah Middle East, Sohar Barka Muscat Oman, Nairobi Kenya Africa

Shipping Tanker, Bulk Carrier cleaning agent, Hold Cleaning Agent. Heavy Duty Alkaline Cleaner with Extra Foaming Effect.

Aqua Clean Tuff is absolutely free along with the purchase of slip barrier coat - Hold block ( Pre load ) materials. ALKAATUFF High foam Free 1000 Ltr with the purchase of 1000 ltrs Slip Barrier Coat Plus is available at Mumbai, Visakhapatnam, Ennore, Kolkata, Kandla - Gandhidham, Fujairah - Gulf

Here the question that arises is why Aqua Clean Tuff is so important during Ship Hold Cleaning?

Aqua Clean Tuff is alkaline in nature which neutralizes the acidic residue created due to the presence of moisture and products like coal, sulphur, salt etc. And emulsification effect of Aqua Clean Tuff makes alll oil stain water soluble. It means ALKAATUFF High Foam CLEANER major role is to neutralize the acidic residue and emulsifying Oil residue. One more important feature of Aqua Clean Tuff results in the formation of dense foam with high-pressure machines, which can easily be applied even on vertical surfaces.

Aqua Clean Tuff - Acts as an Acid Neutralizer - Useful for coal, Sulfur, Salt as its residue when in contact with water, is acidic in nature which directly damages the painted and metal surfaces.

Aqua Clean Tuff - Acts as an Oil residue Emulsifier - Useful for removal of coal and oily residue.

Aqua Clean Tuff - Results in Dense foam - Can be applied on the vertical surface for the long duration.

The largest supplier of Aqua Clean Tuff in Asia ( India and Middle East). More details of Aqua Clean Tuff like MSDS and Using procedure of will be available through this link

Ship Hod Cleaning Alkaline detergent

Read more
1146 reads

Super Dilac Acidic Detergent

Super Dilac Acidic low foaming Detergent cleans Metals surface. And useful product in maintenance and cleaning sector. In the food and Beverage industry, Metals Clean Britte is used as a rust remover. Largest seller and supplier of Super Dilac Acidic Detergent in INDIA Oman, GULF Middle East AND NAIROBI KENYA Africa.

Alias:

Scale Rust SCALE REMOVER DETERGENT TYPE, Super Dilac, Passivation for Steel

Active Matter:

81-90

Application:

RXSOL Super Dilac is a low foaming, high active, non-fuming nitric / phosphoric acid detergent descaler for use in a wide range of CIP applications in the Food and Beverage industry. Also used as Rust Stain cleaner Metal Clean Britte

RXSOL-38-1011-025 ( Metals Clean Brittee ) can be used as a spot cleaner after cleaning fats and fatty acids, can be used on painted surface

A superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited phosphoric acid with ionic and non ionic emulsifier.

For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.

Packing Size:

25.00 Ltr.

Using Procedure:

FOR TANK CLEANING

RECOMMENDATION : 0.2% TO 100%

FIELD:-
specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner.

Procedure for Use :-

RXSOL-38-1011-025 is highly concentrate
Dilute in water (always use a plastic jar and RXSOL-38-1011-025 should be added to water never add water to (RXSOL-38-1011-025.)
The surface should be sound clean and free of oil, grease, dirt etc.
Diluted materials apply on the rusted area for 15 to 20 minutes then wash off with water repeat if necessary.
(For stubborn rusted stains.)

NOTE:-
For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Super Dilac Acidic low foaming Detergent Metal Clean Bright- Rx and allow to dry. The second wash may be necessary. The surface should have a grey/white appearance when the Super Dilac Acidic low foaming Detergent Metal Clean Bright- Rx is dry. Steel surfaces will have a resistance to rust and will render a good base for paint.For removal of rust stains on painted surfaces and wood, Super Dilac Acidic low foaming Detergent Metal Clean Bright Rx should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.

Spraying Direction:-
Using an empty/clean 210-litre drum, fill with 190 litres of fresh water and add 20 litres of Super Dilac Acidic low foaming Detergent Metal Clean Bright This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinses with lots of water if possible use Butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metal Clean Bright will show up in a Wall Wash.

Injection – Not suitable.

Re-circulation:–
When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through Butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pump stack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.

* If the mixture is allowed to overheat, it will soften epoxy/phenolic coating.
* Use a strainer at the pump stack when circulating any solution.

Tank Lining – Stainless / Epoxy, Phenolic

Note:

Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner.

When cleaning aluminium, brass & copper flush with water upon completion of cleaning immediately
Warning : In case of contact with skin, wash immediately with plenty of water. Use chemical resistance PVC gloves for skin contact and also use face mask for eye and face protection.

Read the Material Safety Data Sheet before using this products.

Related Products:

SUPER CONCENTRATED AUTO DETERGENT

Super Auto Wash Concentrate

Degreaser Food Plant Super Solv

Safety Accessories:

Vinyl Gloves (1box =100pcs)

Goggle Chemical Protective

Chemical Protective Suit

Short Description:

Heavy Duty acidic detergent for Metal Tarnish Remover Specially designed for removal of rust from any steel surface area also acts as rust proofing agent. It is non-flammable. Prevents further rusting.

How Super Dilac Acidic low foaming Detergent Metal Clean Britte Works?

Metals Clean Britte at the low pH end effectively dissolves rust faster even more readily than the diluted one. In marine shipping industry, Super Dilac Acidic low foaming Detergent Metal clean Britte is used as a rust remover. And For severely corroded and rusted surfaces and pickling of welding repairs, use 50% solution to neat. while For removal of rust stains on ceramic tiles, enamels, porcelain, glass etc., use a solution of 20-50%, depending on stains and soiling. Rinse off with water after 20-40 minutes.

Super Dilac Acidic low foaming Detergent Metals Clean Britte also some times works as removal of light deposited cement stains and lime, apply a 50% solution, and high pressure wash after 30-40 minutes, and while if cement deposition are hard and more solidified then use our specialized product for cement removers RXSOL-22-2202-025.

Characteristics:-

Non-flammable.
Prevents further rusting.
Economical , cost effective.
Surface brightening
Protects and maintains from corrosion
Acts as rust proofing agent before the application of paints or coatings.
It doesn’t affect rubber and plastic compounds
removes corrosion of all metals
excellent cleaner to remove contamination of fats and salts Marine application for trains, busses, tank containers and ship tanks
odourless, so it can be used in enclosed space
suitable for manual cleaning as well as high- and low pressure systems

Super Dilac Acidic low foaming Detergent Metal Clean Britte is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.

Before application of Super Dilac Acidic low foaming Detergent Metal Clean Britte, we have to understand its cleaning principal...

In general terms and thumb rule for Metals Britte is MORE RUST required more Super Dilac Acidic low foaming Detergent Metals Britte. Chemically Rust { iron oxide (FeO) } is soluble in pH values below 4.0, . Thus, the oxide (oxygen) dissolves as it is formed instead of depositing on the metal's surface. So it is clear more rust required more Metal clean Britte to get dissolve. In practical if the area is fully rusted corroded then direct Metal Clean Britte can be used to dissolve rust particles, while in light contaminated part Metals Clean Britte can be diluted in between 20 to 70% .

2nd factor is the time which is directly affecting the cleaning result. If base metal is aluminium then use Super Dilac Acidic low foaming Detergent Metals Clean Britte concentration 10 to 30% for not more then 5 Minutes. For removal of rust stains on painted or iron surfaces, use 10-30% of Metals Clean Britte soultion for 15-20 minutes. And for heavily rusted and corroded or soiled surfaces and tarnish on copper and brass, use a solution of 20-50%, for 15-40 minutes.

The 3rd important point always be noted, After cleaning of rust from Metals clean Britte all area should be fully rinsed and clean properly with fresh water. And for best long time result to keep rust free surface, Surface can be chemically neutralized with RXSOL-41-8896-025 ( dilution ration 1 Ltr RXSOL-41-8896-025 with 10 Ltr water ). The scientific reason behind that is As With the Rust oxide gone with Metals Clean Britte, the metal surface is in direct contact with the acidic solution, and the corrosion reaction proceeds at a greater rate than it does at higher pH values. For increasing pH values greater than pH 10, the rusting rate seems to fall as pH is increased with help of RXSOL-41-8896-025.(http://www.rxmarine.com/Professional-Heavy-Duty-Alkaline-Cleaner)

Super Dilac Acidic low foaming Detergent Metals clean Britte supplier in Gandhidham ( Kandla, Mundra, Sikka ), Mumbai ( Nhava Seva, JNPT, BPT, Navi Mumbai Maharastra ), Chennai ( Ennore, Tuticorin ), Vizag ( Visakhapatname, Gangavaram ), Kolkata - Haldia, Paradip. Fujairah, Dubai, Sharjah - Middle East - UAE, Sohar Muscat Oman, Canada, Nairobi Kenya Africa

Why RXSOL Super Dilac Acidic low foaming Detergent Metal Clean Britte?

Super Dilac Acidic low foaming Detergent METAL Clean Britte effectively gives detergency as well as rust stain removing cleaning action immediately. Many local brands defining Metals Clean Britte as dilution of phosphoric acid to stand in the market and supply at a very cheaper price. Our continuous development and support of our R&D team enable us to produce a top-notch quality of Metals Clean Britte. Since 1995 we make our self to keep on top then another brand who is supplying Metals Clean Britte. Small drops of RXSOL Metals clean Bright chemically change rust causing elements in the inert atmosphere and RXSOL Super Dilac Acidic low foaming Detergent METAL Clean bright emulsifying detergent property cleans surface effectively and most important things safely. As during our long span of working time we observed that unbranded metal clean bright rapidly damaging smoothness of surface, So before selection and uses of Metals Clean Britte from unknown sources think twice to save your precious metal surface. Principally before uses of any Acidic materials, its buffer action required. Strong ACID with Weak Base as well as a Weak ACID with a strong base. Buffer action of Super Dilac Acidic low foaming Detergent Metals Clean Britte only can gives protection towards the metal surface.

IMPA code of Metals Clean Britte : 551081

Metal cleaning chemicals

FAQ:

Where can Super Dilac Acidic Detergent be used?

757 reads

PRELOAD Slip HOLD BLOCK

Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE. Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Alias:

PRELOAD 300

Active Matter:

72-75

Application:

RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels , which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size:

210.00 Ltr.

Using Procedure:

for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Barrier Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Related Products:

ACQUATuff High Foam

ACQUA Tuff High Foam Detergent

AquaaTuff Ship HOLD Cleaner

PCS Hold Clean

Safety Accessories:

Gloves Disposable

Goggle Chemical Protective

Short Description:

Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Hold Block, Slip Barrier Coats HOLD BLOCK, Preload

Ship hold protective layer coating chemicals. Polymer based water soluble Slip Barrier Polymer Coats HOLD BLOCK is easy to use. There is no any special technical method required to applied on hold surface. Simply dilute the Slip Barrier Polymer Coat with water and spread on entire hold area from top to bottom side. Extra liquidcoming towards bottom can be recollected to cover uncoated area. Simple spray method is helpfull to save time of application. NOTE - Before application of Slip Barrier Polymer Coat Hold Block clean entire hold surface area and make sure dust free.

Slip Barrier Polymer Coats HOLD BLOCK formulated to perform maximum protection to wards hold surface during transport and save lot of time during unloading operations as cargo doesn't adhere towards hold surface. After unloading of cargo when Aquaatuff High Foam is applied to Slip Barrier Polymer Coat treated hold surface all cargo residue get off without any extra manual force requirement.

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and usingprocedure.

RXSOL Bilge Coat (Sulphur Acid Neutralizer) Acts as Acid Neutralizer formed during sulphur voyages.

Before loading of cargo Slip Barrier Coat paint/film can be wise decision to save time for next cargo. As Slip Barrier Coat hold block acts as the barrier film in between cargo and holds surface, So deposition of cargo directly on hold is not possible, and it can be removed easily without scrapping. And Slip Barrier Coat also provide protection against corrosiveness of cargo bye product.

Application of Slip Barrier Coat is just like a lubricant, As it is water soluble polymerized products. This product can be simply spray on the entire surface by manually or through spray machine. And after application of Slip Barrier Coat Its removal is also very easy process. Only by using hold wash with water can remove all coating of Slip Barrier Coats HOLD BLOCK.

As before application of Slip Barrier Coat, Proper uses of hold cleaning chemicals like RXTUFF ALKALINE or ALKAATUFF can save required qty of Slip Barrier Polymer Coats HOLD BLOCK as hold block coating.

Slip Barrier Polymer Coat and Slip Barrier Polymer Coat plus MSDS available with each and every drum. And MSDS also can be download through our website directly by using USER NAME and password.

Ready stock of Slip Barrier Polymer Coat Preload supplier in Gandhidham - Kandla, Mundra, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Mumbai - Nhava Seva, Surat in India and Fuajirah - Dubai, Sharjah in GULF - Middle East.

Also we are keeping ready stock of Muriatic Acid, ALKATUFF High Foam ship hold cleaning chemicals, PCS, Coal Remover, Lime Remover, Alka cleaner etc... Full range of marine chemicals.

Resulting thin transparent temporary Polymer film

888 reads

Soil Cutter HD

Its unique and heavy duty formula Quickly Cuts Into Grease & Tough Soil Deposits. Which eliminates Time & Labour Saver For Heavy Duty & General Maintenance Cleaning.

pH DEGREASER & CLEANER

Alias:

SOIL OUT, SOILUX LAUNDRY

Application:

Due to fast reaction It Penetrates deeply into concrete surfaces. Formula contains low-foaming emulsifiers and is biodegradable, phosphate free, rust-inhibitive, nonpolluting and nonflammable. Specially formulated (Low Foaming RXSOL) for use in parts washers, automatic jet spray washers, or automatic or conventional scrubbers. Mop or spray application rinses freely with water.

Packing Size:

20.00 Kg.PWD

Using Procedure:

This highly concentrated, low/medium-foam cleaner/degreaser instantly dissolves and emulsifies heavy dirt, grease, oils, detergent film and many other surface stains.

Note:

Description:

A special blend of water based chemical solvents for tough, heavy duty cleaning

Instantly dissolves & emulsifies grease, oils & other heavy soil deposits.
Rust-inhibiting formula.
Nonpolluting & Nonflammable
Phosphate free & biodegradable
Also removes waxes & old soap film.
Excellent for degreasing machinery, parts, floors, automotive engines, and parking areas.
Designed for use in parts washers, enclosed jet-spray washers, conventional & automatic scrubbers.

Related Products:

Fabrics Laundry Softner Fabsoft

Laundry Emulsifier Surfactant

Carpet Soil Cleaner MEGA PACK

Protein Stain Spotter

Safety Accessories:

Gloves Disposable

Goggle

Short Description:

Heavy duty Grease & Soil Cutter Its unique and heavy duty formula Quickly Cuts Into Grease & Tough Soil Deposits . which eliminates Time & Labour Saver For Heavy Duty & General Maintenance Cleaning.

Grease Soil Cutter HD manufacturer and supplier in Muscat Barka Oman, Fujairah Dubai Sharjah Abudhabi Ajman UAE Middle East, Nairobi Kenya Africa, Mumbai, Gandidhdam Gujrat, Vizag Visakhapatnam, Chennai Tamilnadu, Kolkata Bengal, Canada

Laundry Soil Cutter

864 reads

Descalant Chemical

Alias:

LIME-OUT, ANTISCALLENT, DESCALER MTA, SCALESOL, Care Clean HDD, Eazy Descaler, DESCALE IT, 651 571563, Max Clean 05, Diesel Engine Cooler Descaling Chemical, Highly Effective Descalant Chemical SG 1202, Maxtreat 3002 Engine Cooler Cleaner 25 Ltr

Active Matter:

68 - 72%

Application:

Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form..

Heat Losses in Boiler due to scale

Thickness of Scale	Increase in fuel consumption due to scale

0.5 mm	2 %
1 mm	4 %
2 mm	6 %
4 mm ( 0.125” )	10 %
8 mm ( 0.25” )	20 %
16 mm ( 0.5” )	40 %
30 mm (1” )	80 %

Packing Size:

25.00 Ltr.

Using Procedure:

RXSOL-11-1008-025 is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of RXSOL-11-1008-025 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser RXSOL-10-1005.

RXSOL-11-1008-025 should be mixed with fresh water to form a solution of 5-30%, depending on the extent of scaling.

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of RXSOL-20-2005 ( www.rxmarine.com/alkaleen-liquid-heavy-duty-25-ltr ) in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

RXSOL-11-1008--DC should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See Rx cleansers Practical Application Manual

Note:

After using RXSOL-11-1008-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc

Why Use RXSOL Descaler?

It is a safe , economical concentrated chemical to be used on the waterside of heat transfer equipment.
You do not have to heat RXSOL 1008 .
RXSOL 1008 is safer for the employees to use than other acid products.
Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
Cleans down to the original surface without pitting.
RXSOL 1008 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
RXSOL 1008 will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
Removing the scale build up allows your equipment to operate more efficiently with less down time.

Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters

Related Products:

Safe Acid Descale Powder

Descaling Scalefoe Compound

Alkaline Descaler 25 Ltr

Safety Accessories:

Hand Gloves Chemical resistance

Chemical Handling Apron

Video Links:

Descalant Chemical SCALE dissolver

Short Description:

Scales are damaging the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all

A powerful sequestrant and descaling chemicals for iron scales dissolving and cleaning in BOILER and COOLING system.

Descaling Liquid manufacturer and supplier in Navi Mumbai MIDC, Mumbai, Nashik, Pune, Taloja MIDC, Rabale, Turbha, Pawana MIDC, Gandhidham, Kandla, Jamnagara, Mundra, Sikka, Surat, Hazira, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai Ennore, Goa, Manglore, Dubai, Sharjah, AbuDhabi, Ajman, Diera, UAE Middle East, Oman Muscat - Barka, Nairobi Kenya Africa, Uganda

Highly Effective Descalant Chemical.

Introduction:

RXSOL Highly Effective Descalant Chemical is a powerful descaling chemical. Recommended for descaling if pipelines, heat exchangers, boiler tubes, vessel

jackets, cooling coils etc.

Product Specifications:

Appearance : Pale Yellow to Dark Yellow liquid

Specific Gravity : 1.02 – 1.26

pH : Acidic

Features:

>> Chemically Stable. Shelf life: 3 Years from date of manufacturing.

>> Available in liquid form, can be dosed easily.

>> It is incorporated with powerful corrosion inhibitor. After descaling is done, the base metal is protected.

>> Can be used for on line descaling

>> Removes hard, difficult to remove scales.

>> Heat transfer is improved.

>> Can be used for ferrous and non-ferrous metals.

Dosage:

The dosage required depends on system water chemistry and operating conditions.

RXSOL Highly Effective Descalant Chemical should be diluted with water before circulation. In case the scaling is more, or descaling is done for the 1st time,

the dilution should be done in the ratio of RXSOL Highly Effective Descalant Chemical : Water :: 1: 5

For routine, preventive maintainence purpose, the dilution can be done upto: RXSOL Highly Effective Descalant Chemical : Water :: 1:10

Our technical representative shall study the system and recommend the required dosage.

We undertake the descaling on contract basis, in which, our expert representative carries out the descaling program at

your site.

Storage and Handling

The product is supplied in HDPE corbouys. It should be stored in a cool and dry place. The shelf life is 36 months from

date of manufacture.

DO NOT USE CONTAINERS FOR POTABLE WATER STORAGE.

USE OF PERSONNEL PROTECTIVE EQUIPMENTS LIKE HAND GLOVES, SAFETY GOGGLES, FACE MASK ARE

HIGHLY RECOMMENDED WHILE HANDLING THE PRODUCT.

In case of contact with skin, immediately wash with copious amount of water and soap. In case of eye contact, immediately flush with large amount of water for at least 15 minutes and get medical attention Refer to Material Safety Data Sheet for proper handling and storage of the product.

Descaler Highly Effective Descalant Chemical

Read more
1183 reads

Cold Flow Improver Middle Distillates Diesel

Alias:

Diesel Antigel Fuel Lubricator

Active Matter:

99-99.5

Application:

Suitable for all diesel engines, Tank and facility use. Also for all heating oil tanks. Helps to prevent cold start and cold running problems in low temperature climate circumstances by anti-gel performance. With Diesel Cold Flow Improver, it is possible to lower the temperature at which the wax crystals will block the filters (Cold Filter Plugging Point) and the temperature at which the diesel freezes (Pour point).

Packing Size:

25.00 Ltr.

Using Procedure:

Operating instructions

In diesel : Add to fuel tank before it reaches the 0 °C limit.
With heating oil: Add to tank before it reaches the 0 °C limit.

Dose ::

RXSOL CFID should be dosed to the fuel tank prior to filling. Recommended dosage is one liter to one thousand liter of fuel (1:1000 or 1000 ppm). In case of poor response dosage can be increased to one liter to five hundred liter of fuel (1:500 or 2000 ppm)

Please note: The dosing temperature should always be at least 5oC above the measured cloud point of the fuel.

Dosage of product	1 ton fuel / Diesel	10 ton fuel / Diesel	50 ton fuel / Diesel	100 ton fuel / Diesel
1000 ppm	Dose 1 ltr	Dose 10 ltr	Dose 50 ltr	Dose 100 ltr
2000 ppm	Dose 2 ltr .	Dose 20 ltr	Dose 100 ltr	Dose 200 ltr

Note:

Features

Cold flow improver and pour point depressant
Delays the onset of paraffin crystallization to improve cold flow properties

Benefits

Enables you to handle the fuel at lower temperatures
Adds safety in handling of the fuel by reducing the pour point and the Cold Filter Plugging Point of the fuel
Keep the wax in suspension preventing wax sedimentation and accumulation

Related Products:

Fuel Oil Treat FOT

Dual Purpose Plus

Valvocare Fuel Additive

Safety Accessories:

Latex Gloves (1 Box = 100 Pcs)

Goggle Chemical Protective

Short Description:

Highly effective flow improver Stop Gelling, Increase Lubricity PREVENTS DEPOSITIONfor heating oil, diesel and super diesel.

Cold Flow Improver Middle Distillates Diesel manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Cold Flow Improver Middle Distillates Diesel at a competitive price from us. We have ready stock of Cold Flow Improver Middle Distillates Diesel in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Diesel Antigel Fuel Lubricator

Read more
1168 reads

Silicon Manganese

In electric submerged-arc furnaces Silico-manganese is chemically manufactured by silico-thermic reduction, using manganese ores and/or slags from the production of ferro-manganese. Silicon Manganese is an alloy of manganese, silicon and iron. It is a cost- effective blend of manganese and silicon for the steel manufacturer. Silico Manganese also consumed in all steel products and used in higher quantities in 200 series stainless steel, alloy steel and manganese steel.

Alias:

Silico Manganese

Application:

Silicon Manganese Precise content of manganese & silicon which helpful to Sturdiness, High strength.

Presence of Silicon Manganese in steel Iron increasing deoxidising property in the Iron. As Silicon Mamganes have Excellent chemical properties as Deoxidizer.

Packing Size:

50.00 Kg

Using Procedure:

RXSOL Silicon Manganese Configurationis Low carbon, low boron, low Ti, Low P, High mn.

Note:

Difference between ferro manganese and silico manganese?

Ferro manganese is a alloy of manganese containing manganese and iron with some amount of carbon, While silico manganese contains silicon and manganese along with some amount of carbon.

Related Products:

Activated Carbon Acid Washed

BORAX

SODA ASH 25 Kg

Short Description:

In electric submerged-arc furnaces Silico-manganese is chemically manufactured by silico-thermic reduction, using manganese ores and/or slags from the production of ferro-manganese.

Silico Manganese manufacturer and exporter from India.

Ferro Alloy

1103 reads

Sulfamic Acid Inhibited

Sulfamic Acid Inhibited - Sulfamic Descalant

Alias:

Sulfamic Acid with Corrosion Inhibitor, Accepta 2316, Inhibited Sulphamic Acid

Active Matter:

95-96

Application:

White crystalline soild, non volatile, non volatile, non hydroscopic. Soluble in water and odorless. Toxic by ingestion.

Uses: Metal and ceramic cleaning, amine sulfamates, ph control, hard water scale removal, electroplating.

At room temperatures, dilute aqueous Sulfamic Acid solution is stable for a long time but rapid hydrolysis occurs at elevated temperatures. Its solution is less corrosive toward metals than other mineral acid. When compared to most of the common strong mineral acids, Sulfamic Acid has desirable water descaling properties, low volatility, low toxicity and is a water soluble solid forming soluble calcium and iron-III salts. Because of its many positive attributes like handling ease, solubility and low corrosiveness, Sulfamic Acid is used for many diversified applications.

APPLICATIONS OF SULFAMIC ACID ---
•    Used as an immersion liquid
•    Used as filling with a Sulfamic acid descalant solution
•    Used through circulation for consistent concentration though the closed circuit
•    Used in cold as well as with temperature ranging from 40º to 60ºC
•    Sulfamic Acid is a very safe and highly effective descalant
•    Sulfamic Acid provides good cleaning and reduces manual cleaning.
•    Sulfamic acid is recommended for the cooling water for descaling the condenser on running plant basis.

Applications Of Sulphamic Acid:

Sulphamic acid in descaling

Sulphamic Acid is super efficient descaling agent and is used for cleaning a variety of industrial equipment and domestic appliances.

Sulphamic acid in paper & pulp Industry

Sulphamic Acid prevents pulp degradation due to temperature at the chlorination and hydrochloride stage. It permits bleaching at higher temperature and lower PH without loss of strength.

Sulphamic acid is used in manufacturing of Dyes, Pigments and in the dyeing of leather

Sulphamic Acid removes excess of nitrides used in the diazotization reactions in the manufacturing of dye stuffs and pigments. Nitrides if present in process water of effluents can also be removed by using Sulphamic Acid

Sulphamic acid in Chlorine Stabilization

Chlorine gas in water form HOCL which reacts with Sulphamic Acid form N-Chloro-Sulphamic Acid to N-ChloroSufamic Acid more stable and yet has active chlorine, Because of this, Sulphamic Acid is used for stabilizing chlorine in swimming pools and cooling towers.

Sulphamic acid in Electroplating and Electro-refining

Metal sulphamate electrolytes values for their high solubility cadmium, cobalt nickle, lead silver and radium sulphamte deposits are bright and dense. Lead sulphamate is used in refining lead when a high quality is desired.

Sulphamic acid in Sulphation and Sulphamation

Sulphamic acid is used for sulphation and sulphamation of many organic compounds. Sulphation of aklyl pheno-ethylen oxide condensation products 9for detergents and sulphation of ethoxylated phenol-formaldehyde resins is preferable with Sulphamic Acid. Stronger agents cause unwanted ring sulphomation.

Sulphamic acid in the Plastic industry

Sulphamic acid finds application in the plastic wherever a curing agents is required which does not have the disadvantage of inorganic acids and which acts faster than organic acids.

Packing Size:

25.00 Kg.PWD

Using Procedure:

DIRECTION OF USAGE

•    Machines should be rinsed with water to remove loose flakes & sludge's before use
•    Powder should be added to warm water for an ideal solution
•    Sample should be properly tested before using
•    Proper ventilation is essential for effective usage of Sulfamic Acid Descalant
•    After cleansing, the solution should be drained out and the system should be rinsed with     water until pH value is neutral
•    Rinsing with ROTO PASS – 212 for better metal prevention and passivation is recommended

Note:

Packing of Sulphamic acid ( NH2SO3H or H3NO3S )

Sulphamic Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on request.

Advantages of using Sulphamic Acid

Sulphamic Acid has very high shelf life.
Sulphamic acid do not require storage/handing arrangement hence no adulteration possible.
Sulphamic acid has very high effectivity of the descaling.
Complete cleaning can be chemically achieved by Sulphamic acid and does not require post descaling manual cleaning.
Sulphamic acid is safe acid, packed in 50 kgs HDPE bags and has no handling hazards.
No storage tanks / system required for dosing.
The solid can be directly charged to system eliminating the cost of system reduces the leave of scaling solids and acts as anti - descalant.
Accidental excess dosing does not affect the metal of the circulating system but it acts to remove the deposited scale from the system.
It is recommended to does into the cooling water for descaling the condenser on running plant.

Sulfamic Acid is used for descaling.

• Sulfamic Acid is very efficient descaling agent and is widely used for cleaning a variety of industrial equipments, especially boilers, condensers, cooling tower and pipelines.

• In paper & pulp Industry, Sulfamic Acid is used to prevent pulp degradation due to temperature conditions existing at the chlorination and hydrochloride stage. Sulfamic Acid also permits bleaching at higher temperature and lowers pH without loss of strength of fiber.

• Sulfamic acid is used in manufacturing of Dyes, Pigments and in the dyeing of leather.

• Sulfamic Acid removes excess of nitrides used in the diazotization reactions in the manufacturing of dye stuffs and pigments. Nitrides, if present, in process water of effluents can also be removed by using Sulfamic Acid.

• In Chlorine Stabilization, Chlorine gas in water form HOCL which reacts with Sulfamic Acid form N-Chloro-Sulphamic Acid to N-ChloroSufamic Acid more stable and yet has active chlorine, Because of this, Sulfamic Acid is used for stabilizing chlorine in swimming pools and cooling towers.

• In Electroplating and Electro-refining, Metal sulphamate electrolytes values for their high solubility cadmium, cobalt nickle, lead silver and radium sulphamte deposits are bright and dense. Lead sulphamate is used in refining lead when a high quality is desired.

• In Solutation and Sulphamation, Sulfamic Acid is used for sulphation and sulphamation of many organic compounds. Sulphation of alkyl pheno-ethylen oxide condensation products for detergents and sulphation of ethoxylated phenol-formaldehyde resins is preferable with Sulfamic Acid. Stronger agents cause unwanted ring sulphomation.

• In the Plastic industry, Sulfamic Acid finds application in the plastic wherever a curing agent is required which does not have the disadvantage of inorganic acids and which acts faster than organic acids.

Other Applications

• Sulfamic Acid is preferred greatly to Hydrochloric Acid in household usage for its intrinsic safety value.

• Sulfamic Acid is used in the design of many types of therapeutic agents such as Antibiotics, Nucleoside/nucleotide Human immunodeficiency virus (HIV) reverse transcriptase inhibitors, HIV protease inhibitors (PIs), anti-cancer drugs (steroid sulfatase and carbonic anhydrase inhibitors), anti-epileptic drugs, and weight loss drugs.

• Sulfamic Acid is used as an acidic cleaning agent for metals and ceramics.

• It is used frequently for removing rust and limescale.

• Sulfamic Acid is used in the industrial cleaning of dairy and brew-house equipment.

• It is used as a catalyst for esterification process.

• Sulfamic Acid is used in Dye and pigment manufacturing.

• Sulfamic Acid is used as an Ingredient in Denture Tablets, Fire Extinguishing Media.

• Sulfamic Acid is used in Pulp and paper industry as a chloride stabilizer.

Related Products:

Descalant Powder with Colour Indicator

Lime Scale Remover

Descaling Scalefoe Compound

CITRIC ACID ANHYDROUS

Safety Accessories:

Chemical Protective Suit

Goggle Chemical Protective

Article News:

NON-CHLORIDE BASED DESCALING CHEMICAL POWDER

Short Description:

Sulphamic acid can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils

Application and Dosage

It Is A Non-Inflammable And Biodegradable Chemical Compound And Does Not Give off Obnoxious Fumes. The Method of Using Samrat Industries Inhibited Sulfamic Acid Is Very Simple And Basic.

Prepare A Solution of 5-10% W/W of RXSOL Inhibited Sulfamic Acid In Preheated Water (preferably) At 70-80oc. The Descalant Solution Should Be Prepared About 20% In Excess of The System Hold Up Volume. Re-Circulate The Solution Using An Acid Compatible Pump. After Descaling Is Completed, Flush Out The Solution And Rinse Once With Plain Water. Neutralize The System With 2% W/W RXSOL RXSOL-20-2004-025 In Water And Recirculate For An Hour. Flush Out The Solution And Return System To Normal Service.

Synonyms of Sulphamic Acid: SULFAMIC ACID, Sulfamidic acid, Amidosulfonic acid, Jumbo, Sulphamic acid, Amidosulfuric acid, Aminosulfonic acid, Imidosulfonic acid, Sulfaminic acid, Aminosulfuric acid, Sulphamidic acid, Sulfamidsaeure, sulfuramidic acid, Amidoschwefelsaeure, Kyselina sulfaminova

Manufacturing, supplying and exporting of Sulphamic Acid. Our company Established in the year 1995 and we are involved in manufacturing supplying and exporting of various industries-based products.

#InhibitedSULFAMICacid_supplier
#sulfamicACIDinhibited_manufacturer
#Sulfamic_MuscatOMAN
#sulfamic_DUBAIuae

INHIBITED SULFAMIC ACID

Sulfamic Acid Combined With Corrosion Inhibitor And Wetting Agent, To Provide Corrosion Protection To Metal During Descaling And Giving Optimum Cleaning of Water Side of Heat Exchangers And Boilers.

It Also Aids In Removal of Loose Corrosion Products, Organic Foulants, Dirt, Clay And Silt Deposits. It Is Used For Descaling of High And Low Pressure Boilers, Heat Exchangers Etc., And Is Safe For Aluminum, Stainless Steel, Carbon Steel, Mild Steel, Cast Iron, Brass, Admiralty Metal, Titanium, Copper And Copper Alloys, Pvc Plastic, Rubber Or Leather When Used As Directed.

Trader, Manufacturer, Supplier and exporter of Inhibited Sulphamic Acid.

Sulfamic Acid manufacture, exporter and supplier in India UAE Middle East, Oman, Nairobi Kenya. Sulfamic Acid supplier in Mumbai, Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, Barka Muscat Ruwi, Salalah, sohar, Oman, Africa, Canada

Key Features and Benefits

Effective Removal of Hard Scale Deposits From Heat Exchanger

Eventually More Economical Than Raw Sulfamic Acid Because About 5-6% of The Raw Acid Strength Is Used Up In Corroding The Metallurgy And Causes Metal Loss

Corrosion Inhibited And Safe For System Metal And Components

Excellent Wetting Characteristics To Aid In Removal of Organic And Greasy Foulants

Biodegradable Product

Easy To Handle

Handling Measures and Precautions

Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.

Storage

This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

Packing

RXSOL Inhibited Sulfamic Acid Is Available In 25, 50kgs PACK.

Inhibited Sulphamic Acid

Read more
952 reads

Sodium Benzoate Food Grade

Sodium Benzoate Food Grade supplier and Exporter for food and Medicinal Industries.

We have TWO grades of Sodium Benzoate :

Sodium Benzoate Food Grade RXSOL-19-1908-050 for used in Solid food contain only
Sodium Benzoate Food Grade RXSOL-95-1908-050 for used in Beverages contain only

Alias:

Sodium Benzoate Food Grade Suitable for Beverage liquid contains

Application:

Most commonly Sodium Benzoate Food Grade used as antifungal food preservative. Sodium Benzoate Food Grade prevent the growth of bacteria, yeast, or other nasty microorganisms that could spoil food.
Sodium benzoate Food Grade also commonly used as a preservative in cosmetics and personal care items, such as hair products, baby wipes, toothpaste, and mouthwash .
It also has industrial uses. One of its biggest applications is to deter corrosion, such as in coolants for car engines.
What’s more, it may be used as a stabilizer in photo processing and to improve the strength of some types of plastic .

Packing Size:

25.00 Kg.PWD

Using Procedure:

Sodium Benzoate Food Grade prohibit growth of fungi and preserves food due to anti-fungal properties. Sodium Benzoate Food Grade can be used in pickles, sauces, jams and fruit juices. Foods that contain vinegar, such as salad dressings etc.

Note:

Sodium Benzoate Food Grade Enhances flavour / taste of Acidic Food, But always remeber never use Sodium Benzoate Food Grade with Vitamin C( Ascorbic Acid ) as it forms benzene which is a carcinogen.

Sodium benzoate is most suitable for use as an antimicrobial agent in foods and beverages which naturally are in the pH range below 4.5, or can be brought into the range by addition of a water soluble acidulant. Sodium benzoate is not recommended as a preservative at pH ranges higher than 4.5.

Related Products:

Citric Acid Food Grade

Benzoic Acid

Guar Gum Powder

Acetic Acid Glacial

Safety Accessories:

Carbon Remover Cleaner HD

DEGREASER

Air Cooler Chem Cleaner

Dish Wash 5 Ltr

Article News:

Sodium Benzoate uses and Application

Short Description:

Sodium Benzoate Food Grade Suitable for Beverage liquid contains for SOLID contains use our other grade RXSOL-19-1908-050

Sodium Benzoate, NF/FCC is widely used in carbonated and still beverages, syrups, cider, salted margarine, olives, sauces, relishes, jellies, jams, preserves, pastry and pie fillings, low fat salad dressing, fruit salads, prepared salads, and in storage of vegetables. Some generalized applications are described in the following examples. Keep in mind that both federal and state regulations may apply to specific applications. These regulations should be reviewed and verified as applicable or non-applicable for each specific use application.

BEVERAGES:
Sodium benzoate is the standard preservative used in carbonated beverages. Typically 0.03 to 0.08% is used for the finished products. Sodium benzoate is often used to preserve the flavor syrup prior to the addition of the beverage acidulant. Non-carbonated beverages normally require somewhat higher concentrations of 0.05 to 0.1% sodium benzoate in the finished products.

CIDER:
The shelf life of non-pasteurized cider can be greatly extended by using sodium benzoate and it should be added as soon as the juice is pressed. A slight tang, which many tasters apparently prefer, may be imparted to the cider by concentrations of sodium benzoate as low as 0.04%.

MARGARINE:
Margarine is regulated by standards of identity described in 21 CFR 166.110. Sodium benzoate is allowed as a preservative up to 0.1%. Special attention to the preservation may be required for low salt or salt free margarine, as salt may exhibit a synergistic effect with sodium benzoate.

SYRUPS:
Concentrated sugar solutions are somewhat resistant to fermentation under ideal conditions but may be subject to quality deterioration in non-ideal circumstances. Sodium benzoate may be used to inhibit microbial growth in these syrups at levels of about 0.1% at pH values below 4.5. In chocolate syrups and other fountain syrups with pH values above 4.5, sodium benzoate may be used in conjunction with other preservatives that are more effective in that pH range.
FRUITS, FRUIT JUICES, AND FRUIT SALADS: Typically sodium benzoate will be used at levels of 0.05 to 0.1% to preserve these products. Maraschino cherries are preserved with 0.05 to 0.1% sodium benzoate. The shelf life of chilled citrus salads is materially improved by the use of 0.03 to 0.08% sodium benzoate in the cover syrup.

ORANGE JUICE PRODUCTS:
Orange juice products are regulated by standards of identity of “Orange Juice with Preservative” described in 21 CFR §146.152 and "Concentrated Orange Juice with Preservative"

FRUIT BUTTERS, JELLIES, PRESERVES, AND RELATED PROUDCTS: Fruit butters, jellies, preserves, and related products are regulated. According to that regulatory description, GRAS preservatives such as sodium benzoate are permitted as optional ingredients in a concentration reasonably required for preservation. Artificially sweetened fruit jelly is and artificially sweetened fruit preserves and jams to contain sodium benzoate up to a level not to exceed 0.1%, by weight, of the finished food.

SALAD DRESSINGS:
Non standardized salad dressings which have a relatively low fat content may be preserved by the use of sodium benzoate at a use level of 0.1%, if the product is below a pH of 4.5.

PREPARED SALADS:
Prepared salads are generally kept under refrigeration but additional protection against mold and yeast growth may be gained by using 0.1% sodium benzoate. The pH of these products should be below 4.5 for the preservative to be effective. The preservative should be added with the salad dressing or with the gelatin solution.

NON-STANDARDIZED SAUCES AND CONDIMENTS:
Many non-standardized sauces and condiments that have a pH range below 4.5 may be effectively preserved with sodium benzoate at 0.05 to 0.1%.PICKLES AND PICKLE PRODUCTS: Yeast and mold contamination and scum formation in pickles and pickle products may be controlled with up to 0.1% sodium benzoate. The sodium benzoate may be added with the sweet juice to be used on the pickles, which may make up about one-third of the total bulk content. Consequently, 0.3% sodium benzoate could be added to the sweet juice to attain not more than 0.1% sodium benzoate in the entire finished product.

PHARMACEUTICAL, TOILETRY, AND COSMETICS APPLICATIONS:
Sodium benzoate, NF/FCC is used extensively in pharmaceutical preparations, toiletries, and cosmetics. Sodium benzoate is a well-known and widely used preservative for pharmaceutical products such as syrups, flavored vehicles, and multiple dose containers for liquid preparations. The pH is an important factor and use levels may vary.In the manufacture of compressed tablets that will give clear solutions, a level of 2 to 4% sodium benzoate powder in the granulation has been described as an efficient lubricant and provides rapid disintegration times. Sodium benzoate has a solubilizing effect of certain drugs, which is useful, for instance, in caffeine preparations or certain anesthetic compositions. Sodium benzoate is also used as a diagnostic acid for liver function.Sodium benzoate is a safe, economical preservative in certain toiletries preparations such as creams, lotions, gum solutions, and toothpaste. The advantages of sodium benzoate in these applications are that it is colorless, odorless, readily soluble, and generally is compatible other ingredients. Sodium benzoate has been generally reported to be used at concentrations below 3%. The preservative is also most efficient at lower pH values. The inhibitory level of sodium benzoate in emulsions increases with oil content. Sodium benzoate has found antimicrobial applications in mouthwashes, dermatological creams and ointments, and deodorants.

OTHER USES:
Sodium benzoate has been used as a preservative for various juice extracts during processing steps and in the finished product. One such application is in the use of sodium benzoate as a preservative for yucca juice extract, which is a natural surfactant used in dairy waste control.
Many other uses of sodium benzoate, NF/FCC are possible in these industries whenever there is an application for a preservative and the parameters of the media are suitable or may be made suitable for sodium benzoate.

INDUSTRIAL APPLICATIONS:
CORROSION INHIBITION:
Sodium benzoate has found considerable application as a corrosion inhibitor in low concentrations. Corrosion inhibition has been reported for steel, zinc, copper, copper alloys, soldered joints, aluminum, and aluminum alloys. As a liquid phase inhibitor, low concentrations of sodium benzoate have been reportedly been used for corrosion control at a pH as low as 5.5, but the most effective inhibition appears to be in the pH range of 6 to 12. The effectiveness of the corrosion inhibition has been reported to be positively affected by small concentrations of Sodium Nitrite and negatively affected by concentrations as low as 0.1% of Sodium Chloride and / or Sodium Sulfate.
A critical minimum pH for inhibition with respect to the sodium benzoate concentration has also been indicated.

It has been suggested that sodium benzoate reduces fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces. Sodium benzoate does not cause foaming or frothing when-used as a corrosion inhibitor in these applications. Sodium benzoate also presents no toxicity problems when used as a corrosion inhibitor, which could be an asset in applications sensitive to odor and toxicity.
The use of sodium benzoate impregnated in paper wrappers has also been used to inhibit the corrosion of tin, steel, chrome plated, and galvanized surfaces even in humid environments. Total contact of the metal surfaces by the wrapping medium is required. In some instances, wrapper protection has been unsuitable and the metal parts have been reported to be inhibited by dipping in solutions of Sodium benzoate. Sodium benzoate has also proved useful in protecting the metal containers for such products as agricultural chemical solutions, household products, waxes, polishes, and aerosol products. Corrosion around labels on tins has been prevented by Sodium benzoate in the adhesive emulsion. Can rusting in neutral to slightly acidic emulsion paints has been prevented by use of sodium benzoate. Sodium benzoate undoubtedly has additional applications as a corrosion inhibitor and has been more extensively evaluated outside the United States where it is more frequently used in that application, especially in automotive engine cooling service.

OTHER INDUSTRIAL USES:
Several other industrial uses for sodium benzoate have been discovered and they are quite valuable. Some of these uses include chemical intermediates, catalysts, and as nucleating agents for polyolefin manufacture.

Sodium Benzoate Food Grade exporter and supplier in Muscat, Sharjah, Fujairah, Dubai, Mumbai, Kenya, Nairobi, Mombasa, Uganda, Canada, Kolkata, Gandhidham, Chennai, Visakhapatnam.

Sodium Benzoate Food Grade manufacturer supplier and exporter in India, UAE- Dubai Sharjah Abu Dhabi Fujairah. Sodium Benzoate Food Grade manufacturer suplier and exporter in Mumbai. Sodium Benzoate Food Grade manufacturer supplier and exporter in Muscat Barka Oman, Yemen, Saudi Arabia. Sodium Benzoate Food Grade manufacturer supplier and exporter in Kenya, Nairobi, Mombasa, Uganda, Canada

The United States Food and Drug Administration has studied sodium benzoate extensively and found that it is safe when consumed in amounts found in normal diets.

Sodium Benzoate is primarily used as FDS GARS additive and preservative in food and beverage application to reduce or inhibit activity of microorganisms. lt is also used in a wide range of other application such as Pharmaceuticals, Cosmetics, Toiletries, Adhesives, Paste, Polishes, Cleaners, Emulsions, Electroplating chemicals, confectionary, coolants.

CAS NO.: 532-32-7

Molecular Formula: CzHsOzNa

Molecular Weight: 144

Appearance: White Powder

Assay: >99.0%

Moisture: >1.5%

Soiubility (in Water): Easily soluble

Storage Store Cool and Dry : Room Temperature

Before using this product, Vou must become completely familiar wlth the safety and hazard information contained in the material safety data sheet. RX MARINE INTERNATIONAL(the seller) present this data sheet information, to the best of our knowledge, to be true and accurate without warranty and disclaims any liability arislng from its use and/or misuse. Seller recommends use of the informatlon to make your own determination of its suitability and completeness for your own use in commercial processes which do not violate third-party patent right or any laws or regulation. The seller makes no warranties, express or implied, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose except as expressly stated in the seller's conditions of sale or sales acknowledgement form.

Beverage Preservative

686 reads

Tri Sodium Phosphate Anhydrous TSP

Tri-sodium phosphate TSP Anhydrous is the inorganic compound . It is a white, granular or crystalline solid, highly soluble in water producing an alkaline solution. Tri-sodium phosphate is manufactured by neutralization of phosphoric acid solution using sodium hydroxides along with sodium carbonate.

Alias:

TRISODIUM PHOSPHATE TSP Anhydrous 25 kg, Trisodium orthophosphate , Sodium Phosphate Tribasic Anhydrous, Sodium Orthophosphate.

Active Matter:

Application:

Used in detergent mixtures, soaps, removing boiler scales, textiles processing, clarifing sugar, paper, water softner, leather tanning, laundering, paint remover,emulsifing fats oils, dairy food processing equipments, metal industrial cleaners.

The most common use of Tri-sodium Phosphate is in cleaning agents.

Tri-sodium Phosphate is used in photographic developers, in clarifying sugar and also in removing boiler scale.

TSP is also used in manufacturing paper, in softening water and in tanning leather

Packing Size:

50.00 Kg.PWD

Using Procedure:

Formulation:

H3PO4 + 3NaOH = Na3PO4 + 3H2O

2H3PO4 + 3Na2CO3 = 2Na3PO4 + 3CO2 + 3H2O

Grades We Manufacture :

• Tri-sodium Phosphate Anhydrous Industrial Grade

• Tri-sodium Phosphate Anhydrous Pure Grade

Note:

SYNONYMS :- Trisodium orthophosphate , Sodium phosphate tribasic , Sodium orthophosphate.

Cas No :- 7758-16-9

Chemical Formula :- Na3po4

Molecular Weight :- 163.94

Physical Form :- White Free Flowing Powder.

Solubility :- Soluble In Water.

Ph Of 1% Soln :- 11.8 - 12.2

P2o5 :- 42.0 - 43.5 %

Related Products:

Tri Sodium Phosphate TSP

Borax Sodium Borate

Short Description:

TRI SODIUM PHOSPHATE TSP Powder ANHYDROUS

Tri Sodium Phosphate Anhydrous TSP manufacturer, exporter and supplier in India, UAE - Middle East, Oman, Nairobi Kenya Africa. Tri Sodium Phosphate Anhydrous TSP stockist and supplier in Mumbai, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Jerf Ajman, UAE GULF, Gandhidham, Kolkata, Chennai, Visakhapatnam, Surat Gujrat, Sohar Barka Oman, Sudan, Yemen

Anhydrous TSP

FAQ:

TSP Application

831 reads

Search

Coolant Glycol Antifreeze-27