PRELOAD Slip HOLD BLOCK

SKU: RXSOL-20-2210-210

Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE.  Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Alias: 

PRELOAD 300

Active Matter: 
72-75
Application: 

RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels , which carrying corrosive and / or messy cargos  such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface : 
for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface  each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size: 
210.00 Ltr.
Image: 
Using Procedure: 

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Note: 

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo /  Lime wash should be removed .
                    2 > Newly Painted surface should be fully cured.

 

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020,  Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

 

 

Slip Barrier Coat RXSOL HOLD BLOCK  ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

 

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

 

COAL REMOVER rx hold  ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

 

 

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

 

 

Rock Phosphate Cleaner rx hold  ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

 

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains.  Part No.- RXSOL-22-2208-210

 

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

 

 

Short Description: 
Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Hold Block, Slip Barrier Coats HOLD BLOCK, Preload 

Ship hold protective layer coating chemicals. Polymer based water soluble Slip Barrier Polymer Coats HOLD BLOCK is easy to use. There is no any special technical method required to applied on hold surface. Simply dilute the Slip Barrier Polymer Coat with water and spread on entire hold area from top to bottom side. Extra liquidcoming towards bottom can be recollected to cover uncoated area. Simple spray method is helpfull to save time of application.  NOTE - Before application of Slip Barrier Polymer Coat Hold Block clean entire hold surface area and make sure dust free.

Slip Barrier Polymer Coats HOLD BLOCK formulated to perform maximum protection to wards hold surface during transport and save lot of time during unloading operations as cargo doesn't adhere towards hold surface. After unloading of cargo when Aquaatuff High Foam is applied to Slip Barrier Polymer Coat treated hold surface all cargo residue get off without any extra manual force requirement.

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and usingprocedure.

RXSOL Bilge Coat (Sulphur Acid Neutralizer)  Acts as Acid Neutralizer formed during sulphur voyages

Before loading of cargo Slip Barrier Coat paint/film can be wise decision to save time for next cargo. As Slip Barrier Coat hold block acts as the barrier film in between cargo and holds surface, So deposition of cargo directly on hold is not possible, and it can be removed easily without scrapping. And Slip Barrier Coat also provide protection against corrosiveness of cargo bye product.

 

Application of Slip Barrier Coat is just like a lubricant, As it is water soluble polymerized products. This product can be simply spray on the entire surface by manually or through spray machine. And after application of Slip Barrier Coat Its removal is also very easy process. Only by using hold wash with water can remove all coating of Slip Barrier Coats HOLD BLOCK.

 

As before application of Slip Barrier Coat, Proper uses of hold cleaning chemicals like RXTUFF ALKALINE or ALKAATUFF can save required qty of Slip Barrier Polymer Coats HOLD BLOCK as hold block coating.

Slip Barrier Polymer Coat and Slip Barrier Polymer Coat plus MSDS available with each and every drum. And MSDS also can be download through our website directly by using USER NAME and password. 

Ready stock of Slip Barrier Polymer Coat Preload supplier in Gandhidham - Kandla, Mundra, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Mumbai - Nhava Seva, Surat in India and  Fuajirah - Dubai, Sharjah in GULF - Middle East.

Also we are keeping ready stock of Muriatic Acid, ALKATUFF High Foam ship hold cleaning chemicals, PCS, Coal Remover, Lime Remover,  Alka cleaner etc... Full range of marine chemicals.

Resulting thin transparent temporary Polymer film

Get more with every purchase

Keep buying to get free reward points. For more details click at http://rxreward.com

 

stock-clearance.png