Pump & Accessory-21

Hydrogen Peroxide 7-10 Percent

Hydrogen peroxide is a chemical compound with the formula H2O2. It is the simplest peroxide (a compound with an oxygen-oxygen single bond) and in its pure form is a colorless liquid, slightly more viscous than water.

Application:

Hydrogen Peroxide has many use including House Hold, Domestic. Agriculture, Textile, Industries, Medical and West water Treatment.

Packing Size:

25.00 Ltr.

Using Procedure:

House Hold : One of the most common uses of hydrogen peroxide is as a disinfectant. Spray it on surfaces like kitchen counter top and wipe with a clean rag. It can be used as a mouthwash too. You have to dilute the chemical with water and use it for rinsing the mouth. This mouthwash is also said to whiten teeth. Ensure that you do not swallow the liquid, while rinsing.
It can also be used to wash vegetables and fruits, in order to get rid of germs and pesticides. Add some hydrogen peroxide to a bowl full of water (you may also add a few pinches of salt). Soak the veggies and fruits for some time. Remove them and rinse with cold water, before use.This chemical is also used to purify water in swimming pools.

Agriculture : Farmers use it as an insecticide. They spray diluted form of this chemical, on plants, so that the pests and weeds get killed, without causing harm to the plants. Its also used for watering plants. Mix an ounce of this chemical with a quart of water and use it on plants. Apart from boosting the level of oxygen in the soil, this mixture is also said to prevent root rot. Some people soak seeds in it, after diluting it with water. It is said that this will fasten the process of germination. For this purpose have to mix 1.5 teaspoons of hydrogen peroxide in a cup of water.

Textile: It acts as a stain remover. Put 1 spoon tea in 1 bucket water and let it sit for a while. After that, rinse the stains with water and soap.
As it has bleaching property, it is used as a bleach too.

IIndustrial :

Reduced Sulfur Compound Treatment for Refinery Wastewater

Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species.

Supplemental Dissolved Oxygen to Reduce BOD and COD

Hydrogen peroxide has been used to reduce BOD and COD in refinery wastewater Supply of Supplemental Dissolved Oxygen (DO) when biological treatment systems experience temporary overloads or equipment failure.Predigestion of wastewater which contains moderate to high levels of compounds that are toxic, inhibitory or recalcitrant to biological treatment.As indicated by these examples, hydrogen peroxide can be used as a stand-alone treatment or as an enhancement to existing physical or biological treatment processes, depending on the situation.

Wastewater Pretreatment
Hydrogen peroxide is one of the most versatile, dependable and environmentally compatible oxidizing agents. The relative safety and simplicity of its use as an oxidizing agent has led to the development of a number of applications in refinery wastewater systems.

Note:

Product specification

Molar mass :::--- 34.0147 g/mol
Appearance :::--- light blue; colorless in solution
Odor :::--- sharpBoiling point :::--- 150.2 °C, 423 K, 302 °F
Solubility in water :::---Miscible
Solubility :::--- soluble in ether, alcohol insoluble in petroleum ether
Viscosity :::---1.245 cP (20 °C)

Short Description:

Pure form is a colorless liquid, slightly more viscous than water.

Hydrogen Perxoide supplier and exporter in India and Middle East. H2O2 used as an oxidizer, bleaching agent and antiseptic.

Hydrogen Peroxide 7-10 Percent manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Hydrogen Peroxide 7-10 Percent at a competitive price from us. We have ready stock of Hydrogen Peroxide 7-10 Percent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

H2O2

586 reads

HAND OPERATING PUMP

Material of Construction :: Stainless Steel

Application:

Basically used in chemicalindustries to pressurise liquid media by hand operating method.

Packing Size:

1.00 Pieces

Related Products:

THIEF DIPPER (IS:6855-2003)

Drum Sampler Semi Solid

Short Description:

HOSE TESTER EQUIPMENT

HAND OPERATING PUMP manufacturer exporter and supplier in India Middle East, Oman, Kenya Nairobi, Mumbai, Gandhidham, Chennai, Vizag, Kolkata, Surat, Dubai, Sharjah, Abudhabi, Ajman, Muscat Sohar, Fujairah, Barka Oman

Pump & Accessory-21

663 reads

VAN VEEN GRAB SAMPLER

Material : Stainless Steel / Mild Steel

Application:

Capacity : 2 Kgs. to 5 Kgs. And 10 kgs.

Packing Size:

1.00 Pieces

Related Products:

FREEZING POINT APPARATUS ASTM D-2386

Cage Sampler Quart Weighted Bottle Catcher

Short Description:

VAN VEEN GRAB SAMPLER

Use :: For obtaining Sea Bed Sample.

VAN VEEN GRAB SAMPLER manufacturer exporter and supplier in India Middle East, Oman, Kenya Nairobi, Mumbai, Gandhidham, Chennai, Vizag, Kolkata, Surat, Dubai, Sharjah, Abudhabi, Ajman, Muscat Sohar, Fujairah, Barka Oman

608 reads

Sodium Benzoate Food Grade

Sodium Benzoate Food Grade supplier and Exporter for food and Medicinal Industries.

We have TWO grades of Sodium Benzoate :

Sodium Benzoate Food Grade RXSOL-19-1908-050 for used in Solid food contain only
Sodium Benzoate Food Grade RXSOL-95-1908-050 for used in Beverages contain only

Alias:

Sodium Benzoate Food Grade Suitable for Beverage liquid contains

Application:

Most commonly Sodium Benzoate Food Grade used as antifungal food preservative. Sodium Benzoate Food Grade prevent the growth of bacteria, yeast, or other nasty microorganisms that could spoil food.
Sodium benzoate Food Grade also commonly used as a preservative in cosmetics and personal care items, such as hair products, baby wipes, toothpaste, and mouthwash .
It also has industrial uses. One of its biggest applications is to deter corrosion, such as in coolants for car engines.
What’s more, it may be used as a stabilizer in photo processing and to improve the strength of some types of plastic .

Packing Size:

25.00 Kg.PWD

Using Procedure:

Sodium Benzoate Food Grade prohibit growth of fungi and preserves food due to anti-fungal properties. Sodium Benzoate Food Grade can be used in pickles, sauces, jams and fruit juices. Foods that contain vinegar, such as salad dressings etc.

Note:

Sodium Benzoate Food Grade Enhances flavour / taste of Acidic Food, But always remeber never use Sodium Benzoate Food Grade with Vitamin C( Ascorbic Acid ) as it forms benzene which is a carcinogen.

Sodium benzoate is most suitable for use as an antimicrobial agent in foods and beverages which naturally are in the pH range below 4.5, or can be brought into the range by addition of a water soluble acidulant. Sodium benzoate is not recommended as a preservative at pH ranges higher than 4.5.

Related Products:

Citric Acid Food Grade

Benzoic Acid

Guar Gum Powder

Acetic Acid Glacial

Safety Accessories:

Carbon Remover Cleaner HD

DEGREASER

Air Cooler Chem Cleaner

Dish Wash 5 Ltr

Article News:

Sodium Benzoate uses and Application

Short Description:

Sodium Benzoate Food Grade Suitable for Beverage liquid contains for SOLID contains use our other grade RXSOL-19-1908-050

Sodium Benzoate, NF/FCC is widely used in carbonated and still beverages, syrups, cider, salted margarine, olives, sauces, relishes, jellies, jams, preserves, pastry and pie fillings, low fat salad dressing, fruit salads, prepared salads, and in storage of vegetables. Some generalized applications are described in the following examples. Keep in mind that both federal and state regulations may apply to specific applications. These regulations should be reviewed and verified as applicable or non-applicable for each specific use application.

BEVERAGES:
Sodium benzoate is the standard preservative used in carbonated beverages. Typically 0.03 to 0.08% is used for the finished products. Sodium benzoate is often used to preserve the flavor syrup prior to the addition of the beverage acidulant. Non-carbonated beverages normally require somewhat higher concentrations of 0.05 to 0.1% sodium benzoate in the finished products.

CIDER:
The shelf life of non-pasteurized cider can be greatly extended by using sodium benzoate and it should be added as soon as the juice is pressed. A slight tang, which many tasters apparently prefer, may be imparted to the cider by concentrations of sodium benzoate as low as 0.04%.

MARGARINE:
Margarine is regulated by standards of identity described in 21 CFR 166.110. Sodium benzoate is allowed as a preservative up to 0.1%. Special attention to the preservation may be required for low salt or salt free margarine, as salt may exhibit a synergistic effect with sodium benzoate.

SYRUPS:
Concentrated sugar solutions are somewhat resistant to fermentation under ideal conditions but may be subject to quality deterioration in non-ideal circumstances. Sodium benzoate may be used to inhibit microbial growth in these syrups at levels of about 0.1% at pH values below 4.5. In chocolate syrups and other fountain syrups with pH values above 4.5, sodium benzoate may be used in conjunction with other preservatives that are more effective in that pH range.
FRUITS, FRUIT JUICES, AND FRUIT SALADS: Typically sodium benzoate will be used at levels of 0.05 to 0.1% to preserve these products. Maraschino cherries are preserved with 0.05 to 0.1% sodium benzoate. The shelf life of chilled citrus salads is materially improved by the use of 0.03 to 0.08% sodium benzoate in the cover syrup.

ORANGE JUICE PRODUCTS:
Orange juice products are regulated by standards of identity of “Orange Juice with Preservative” described in 21 CFR §146.152 and "Concentrated Orange Juice with Preservative"

FRUIT BUTTERS, JELLIES, PRESERVES, AND RELATED PROUDCTS: Fruit butters, jellies, preserves, and related products are regulated. According to that regulatory description, GRAS preservatives such as sodium benzoate are permitted as optional ingredients in a concentration reasonably required for preservation. Artificially sweetened fruit jelly is and artificially sweetened fruit preserves and jams to contain sodium benzoate up to a level not to exceed 0.1%, by weight, of the finished food.

SALAD DRESSINGS:
Non standardized salad dressings which have a relatively low fat content may be preserved by the use of sodium benzoate at a use level of 0.1%, if the product is below a pH of 4.5.

PREPARED SALADS:
Prepared salads are generally kept under refrigeration but additional protection against mold and yeast growth may be gained by using 0.1% sodium benzoate. The pH of these products should be below 4.5 for the preservative to be effective. The preservative should be added with the salad dressing or with the gelatin solution.

NON-STANDARDIZED SAUCES AND CONDIMENTS:
Many non-standardized sauces and condiments that have a pH range below 4.5 may be effectively preserved with sodium benzoate at 0.05 to 0.1%.PICKLES AND PICKLE PRODUCTS: Yeast and mold contamination and scum formation in pickles and pickle products may be controlled with up to 0.1% sodium benzoate. The sodium benzoate may be added with the sweet juice to be used on the pickles, which may make up about one-third of the total bulk content. Consequently, 0.3% sodium benzoate could be added to the sweet juice to attain not more than 0.1% sodium benzoate in the entire finished product.

PHARMACEUTICAL, TOILETRY, AND COSMETICS APPLICATIONS:
Sodium benzoate, NF/FCC is used extensively in pharmaceutical preparations, toiletries, and cosmetics. Sodium benzoate is a well-known and widely used preservative for pharmaceutical products such as syrups, flavored vehicles, and multiple dose containers for liquid preparations. The pH is an important factor and use levels may vary.In the manufacture of compressed tablets that will give clear solutions, a level of 2 to 4% sodium benzoate powder in the granulation has been described as an efficient lubricant and provides rapid disintegration times. Sodium benzoate has a solubilizing effect of certain drugs, which is useful, for instance, in caffeine preparations or certain anesthetic compositions. Sodium benzoate is also used as a diagnostic acid for liver function.Sodium benzoate is a safe, economical preservative in certain toiletries preparations such as creams, lotions, gum solutions, and toothpaste. The advantages of sodium benzoate in these applications are that it is colorless, odorless, readily soluble, and generally is compatible other ingredients. Sodium benzoate has been generally reported to be used at concentrations below 3%. The preservative is also most efficient at lower pH values. The inhibitory level of sodium benzoate in emulsions increases with oil content. Sodium benzoate has found antimicrobial applications in mouthwashes, dermatological creams and ointments, and deodorants.

OTHER USES:
Sodium benzoate has been used as a preservative for various juice extracts during processing steps and in the finished product. One such application is in the use of sodium benzoate as a preservative for yucca juice extract, which is a natural surfactant used in dairy waste control.
Many other uses of sodium benzoate, NF/FCC are possible in these industries whenever there is an application for a preservative and the parameters of the media are suitable or may be made suitable for sodium benzoate.

INDUSTRIAL APPLICATIONS:
CORROSION INHIBITION:
Sodium benzoate has found considerable application as a corrosion inhibitor in low concentrations. Corrosion inhibition has been reported for steel, zinc, copper, copper alloys, soldered joints, aluminum, and aluminum alloys. As a liquid phase inhibitor, low concentrations of sodium benzoate have been reportedly been used for corrosion control at a pH as low as 5.5, but the most effective inhibition appears to be in the pH range of 6 to 12. The effectiveness of the corrosion inhibition has been reported to be positively affected by small concentrations of Sodium Nitrite and negatively affected by concentrations as low as 0.1% of Sodium Chloride and / or Sodium Sulfate.
A critical minimum pH for inhibition with respect to the sodium benzoate concentration has also been indicated.

It has been suggested that sodium benzoate reduces fouling by reducing the tendency of rust and scale to dislodge from corroded surfaces. Sodium benzoate does not cause foaming or frothing when-used as a corrosion inhibitor in these applications. Sodium benzoate also presents no toxicity problems when used as a corrosion inhibitor, which could be an asset in applications sensitive to odor and toxicity.
The use of sodium benzoate impregnated in paper wrappers has also been used to inhibit the corrosion of tin, steel, chrome plated, and galvanized surfaces even in humid environments. Total contact of the metal surfaces by the wrapping medium is required. In some instances, wrapper protection has been unsuitable and the metal parts have been reported to be inhibited by dipping in solutions of Sodium benzoate. Sodium benzoate has also proved useful in protecting the metal containers for such products as agricultural chemical solutions, household products, waxes, polishes, and aerosol products. Corrosion around labels on tins has been prevented by Sodium benzoate in the adhesive emulsion. Can rusting in neutral to slightly acidic emulsion paints has been prevented by use of sodium benzoate. Sodium benzoate undoubtedly has additional applications as a corrosion inhibitor and has been more extensively evaluated outside the United States where it is more frequently used in that application, especially in automotive engine cooling service.

OTHER INDUSTRIAL USES:
Several other industrial uses for sodium benzoate have been discovered and they are quite valuable. Some of these uses include chemical intermediates, catalysts, and as nucleating agents for polyolefin manufacture.

Sodium Benzoate Food Grade exporter and supplier in Muscat, Sharjah, Fujairah, Dubai, Mumbai, Kenya, Nairobi, Mombasa, Uganda, Canada, Kolkata, Gandhidham, Chennai, Visakhapatnam.

Sodium Benzoate Food Grade manufacturer supplier and exporter in India, UAE- Dubai Sharjah Abu Dhabi Fujairah. Sodium Benzoate Food Grade manufacturer suplier and exporter in Mumbai. Sodium Benzoate Food Grade manufacturer supplier and exporter in Muscat Barka Oman, Yemen, Saudi Arabia. Sodium Benzoate Food Grade manufacturer supplier and exporter in Kenya, Nairobi, Mombasa, Uganda, Canada

The United States Food and Drug Administration has studied sodium benzoate extensively and found that it is safe when consumed in amounts found in normal diets.

Sodium Benzoate is primarily used as FDS GARS additive and preservative in food and beverage application to reduce or inhibit activity of microorganisms. lt is also used in a wide range of other application such as Pharmaceuticals, Cosmetics, Toiletries, Adhesives, Paste, Polishes, Cleaners, Emulsions, Electroplating chemicals, confectionary, coolants.

CAS NO.: 532-32-7

Molecular Formula: CzHsOzNa

Molecular Weight: 144

Appearance: White Powder

Assay: >99.0%

Moisture: >1.5%

Soiubility (in Water): Easily soluble

Storage Store Cool and Dry : Room Temperature

Before using this product, Vou must become completely familiar wlth the safety and hazard information contained in the material safety data sheet. RX MARINE INTERNATIONAL(the seller) present this data sheet information, to the best of our knowledge, to be true and accurate without warranty and disclaims any liability arislng from its use and/or misuse. Seller recommends use of the informatlon to make your own determination of its suitability and completeness for your own use in commercial processes which do not violate third-party patent right or any laws or regulation. The seller makes no warranties, express or implied, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose except as expressly stated in the seller's conditions of sale or sales acknowledgement form.

Beverage Preservative

685 reads

Hydro Testing Corrosion Inhibitor

Hydro Testing Corrosion Inhibitor RXSOL 4000 is a multicomponent, multifunctional formulation which prevents corrosion, microbiological growth in single product treatment programme. Inhibitor, corrosion, multicomponent, multifunctional: For prevention of corrosion and microbiological growth in water flood systems during hydrostatic testing and other applications.

Alias:

REMIDOL 4000, Hibitol 2000, Indion 175, Visco 3900, Nevamine, Hydrosure O-3670R, Hydrotesting Corrosion Inhibitor, Visco Nalco 3900, Tretolite WF-166, Hydro Testing Corrosion Inhibitor 220 Kg PACK

Active Matter:

78-83%

Application:

PERFORMANCE:

CORROSION: Effectively prevents corrosion due to Carbon Dioxide, inorganic salts, dissolved oxygen & Hydrogen sulphide contamination from sour fluid or bacterial action. The inhibitor acts as a cathodic polarizer

MICROBIOLOGICAL GROWTH: Effectively prevents the metabolic function necessary for reproduction of the bacteria cell. Successfully prevents anaerobic/aerobic and sulphate reducing bacteria.

Packing Size:

220.00 Kg.Liq

Using Procedure:

Hydro Testing Corrosion Inhibitor ( RXSOL 4000 ) can be fed directly or through chemical doses pump. Doses may vary with the quality of water to be treated and the residence time of the water in the system.

Actual consumption is determined under operating conditions.

Recommended Dosage of Hydro Testing Corrosion Inhibitor RXSOL 4000

Hydro Testing Corrosion Inhibitor RXSOL 4000 dosage levels typically are 500ppm for hydrotest operations and between 1000- 4000 ppm when used as a packer fluid inhibitor. The exact dose rate for a specific job would depend on the environment and fluid that the chemical was being deployed into. We are happy to advise on this if required.

Note:

Benefit / Advantage of Hydro Testing Corrosion Inhibitor RXSOL 4000

Hydro Testing Corrosion Inhibitor RXSOL 4000 is a liquid multifunctional chemical designed to completely treat hydrostatic test fluid, saltwater packer fluid, saltwater drilling fluid, during Hydro-testing and oil field water injection programme.
Hydro Testing Corrosion Inhibitor RXSOL 4000 contains an effective filming corrosion inhibitor, oxygen scavenger and biocide, altogether in a single formulation convenient to dose with single chemical injection pump or skid.
Hydro Testing Corrosion Inhibitor RXSOL 4000 is economical to use as handling is limited to one chemical.
Rapidly kills Sulphate Reducing (SRB) as well as other offending bacteria that give rise to Microbial Influenced Corrosion (MIC)
Mitigates against acid corrosion resulting from residual low pH of surface waters

Related Products:

RXSOL 4000

BRINE CORROSION INHIBITOR RX

ROCCOR NB Corrosion Scale Inhibitor Liquid

RXSOL 4000

MICRO BIOCIDE Cooling Water

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Antiscalant RO

AC2 DESCALEX Powder

Short Description:

Hydro-testing corrosion protection for Pipeline, Tank contains corrosion inhibitor, oxygen scavenger and biocide

Pipeline corrosion inhibitor manufacturer and supplier. Hydro Testing Corrosion Inhibitor RXSOL 4000 provide complete protection against rust and scale.

Chemical for conditioning of hydro test water i.e. blend of corrosion inhibitor, one Oxygen scavenger, one scale inhibitor & one biocide

The major factor which contributes to the corrosion in hydro-static test water is the dissolved oxygen and dissolved solids do not have much impact on the corrosion rate except the chloride content. The presumptions like not using the corrosion inhibitor if the water is not with high mineral content could beM disastrous as in fact any corrosion process, even a very mild one, will be accompanied by the set up of galvanic cells and formation of corrosion products deposits. Such environment makes the conditions ideal for the corrosion process to continue at accelerated rate once the process fluid will be run through the line.

Hydro Testing Corrosion Inhibitor RXSOL 4000 is Hydro-testing corrosion protection for Pipeline, Tank. RXSOL 4000 Chemical for conditioning of hydro test water i.e. blend of corrosion inhibitor, one Oxygen scavenger, one scale inhibitor & one biocide manufacturer exporter and supplier Mumbai, Surat, Gandhidham, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Sharjah, Ajman, Abudhabi, Dubai UAE Middle East, Muscat Oman Sohar

Effect of Micro – Organisms:

All water used for Hydro-testing generally contains iron bacteria and sulphate reducing bacteria. The iron bacteria attack to the pipe wall mostly at 6 o’clock location and produces tubercle of iron oxide by metabolic action. Below the tubercles, sulphate reducing bacteria grows and generates H2S from sulphate of water. The H2S goes on reacting with iron forming Fe2S. This is combined with auto catalytic formation of HCI under tubercle and lead to deep pitting and perforation of the pipe wall. The mechanism is more pronounced under stagnant condition and is relevant of Hydrostatic testing.

#HydroTestingINHIBITOR_UAE

Corrosion Inhibitor Injection

Read more
1598 reads

FERRO IOD CLEAN

Alias:

Cooling System Cleaning chemicals

Application:

FERRO IOD CLEAN effectively removes iron oxides without the hazards of handling or subjecting the system metallurgy to metal loss associated with using strong acid solutions. FERRO IOD CLEAN can also loosen and disperse light organic debris or light mineral scale trapped in the iron oxide deposits.

Packing Size:

30.00 Kg.Liq

Using Procedure:

APPLICATION & USE

FERRO IOD CLEAN is an effective cleaner for removing iron oxides without the need for neutralization. Using good quality fresh water, circulate a maximum 10% solution of FERRO iod CLEAN through the equipment. Depending upon the extent of the fouling, the solution strength, contact time, and temperature may have to be adjusted. Elevated temperatures will improve the cleaning process. In the event of a heavily fouled cooling water system, more than one cleaning may be required.
After the cleaning process has been completed using FERRO IOD CLEAN, the system should be drained and thoroughly flushed with fresh water. A quality corrosion inhibitor,such as RXSOL-40-4001-025 or RXSOL-40-4010-025 should then be immediately used to protect the system.

For a precommissioning cleaning to remove iron oxides, circulate a solution of 3-5% FERRO IOD CLEAN through the equipment. If cleaning is to be performed without heat, circulate for several days, depending on the severity of the deposits. If heat, 49-65° C, is applied, then circulation can be reduced to less than a day, again, depending on the severity of the deposits. For a precommissioning cleaning to remove iron oxides from a boiler that has not been coated with a protective grease, circulate a 3% solution of FERRO IOD CLEAN through the system for 24 hours at 70° C. After cleaning and fresh water
flushing, complete final fresh water flush with a 1% solution RXSOL-50-5002-025 to reduce flash rust.

The following supplies are required to perform the cleaning procedure described below (Diesel Engine Cooling Systems (Out of Service)):

Circulating pump - either electric or air-driven, which would be capable of circulating the water system 1-2 times per hour.
Mixing tank. An open end, 100-liter drum, such as Air Diaphragm Pump System is suitable.
Steel piping, flexible hoses, fittings and valves as required to perform the job.IMPORTANT: This should include a vent pipe leading from the top of the engine system to an upper deck area outside of the engine room.
Protective clothing for personnel. This includes goggles, rubber gloves, rubber aprons, etc.
Sufficient FERRO IOD CLEAN to prepare the required cleaning solution (maximum 10% dilution) based on the normal water capacity of the system being cleaned.

Cleaning Diesel Engine Cooling Systems (Out of Service)

Where possible, connect the discharge side of the circulating pump to the lowest practical point on the diesel cooling system using a length of flexible hose and the appropriate fittings. Using a second section of flexible hose with fittings, connect a cleaning solution return with a valve from the highest point on the cooling jacket system to the top of the mixing tank, which is the suction supply for the circulating pump.
Add approximately 100 liters of fresh water to the tank.
Before commencing the cleaning, heat the water in the cooling system until it reaches a temperature of 60-82° C. The heat can be provided by a heating coil or steam line in the cleaning solution mixing tank or a system heat exchanger.
Secure the engine. This only applies if the engine had to be run to heat the water.
Be sure all valves in the mixing tank, pump, return and vent system are open. Start the chemical circulating pump and adjust the flow rate so that the level of the solution in the mixing
tank remains constant.
Add sufficient FERROCLEAN to the mixing tank to prepare the required proportions of cleaning solution based on the
water volume in the system. An equal amount of water will need to be drained from the system before adding FERRO IOD CLEAN.
Continue circulation and maintain the cleaning solution temperature for a minimum of 12 hours. As the cleaning progresses the system water may start to change to a dark green/black color.
Drain and flush the system with fresh water. Continue flushing the system with fresh water until the discharge water is completely clear.
Inspect the cooling system interior for cleanliness. Repeat the procedures if the system is not completely clean.
Disconnect the vent system and the cleaning system from the engine. Secure all inlet and outlet cleaning points.
Fill the engine system with distillate or good quality fresh water and add the correct amount of corrosion inhibitor prior to returning the equipment to service.

Note:

FEATURES

Water-based cleaner
Penetrates and disperses deposits
Passivates
No objectionable odor
Contains emulsifiers and dispersing agents
Contains antifoam
Non-flammable

BENEFITS

Easily disperses in water
Decreases maintenance costs
Increases equipment life
Increases operating efficiency
Dissolved deposits will not redeposit
Effective removal of oxides
Safe for use on aluminum, brass, copper, mild steel, and stainless steel
Protects metallurgy from corrosion after cleaning
Prevents flash rusting
Can be used where there is light oil contamination or mineral scale trapped in the iron oxide deposits

Related Products:

Nitrite Borax RoccorRX NB Liq

Cool Water Treat Corrosion Inhibitor

RXSOL 2000 Corrosion Inhibitor

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Chemical Handling Apron

Article News:

Flushing Procedure for Cooling water / Chilled water system

Short Description:

FERRO IOD CLEAN removes, dissolves and disperses iron oxide deposits from diesel cooling water systems while providing a temporary passivating film to protect the base metal from corrosion.

FERRO IOD CLEAN manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of FERRO IOD CLEAN at a competitive price from us. We have ready stock of FERRO IOD CLEAN in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Iron oxide remover from cooling water systems

Read more
1332 reads

Formalin

We are a leading supplier of FORMALIN - Formaldehyde solution, which is a chemical compound with the formula H2CO. It is an organic compound containing a terminal carbonyl group. It is a colorless and has pungent odor. Our range of FORMALIN - formaldehyde solution is immensely used in various areas.

Alias:

Formalin 230 Kg

Active Matter:

37-38

Application:

Usage

Manufacture of amino and phenolic resins

Anhydrous monomer, solution polymers and derivatives

Manufacture of urea formaldehyde

Wood composite plywood, partial board, fiber board, fiber bonding, laminates, foundry, resins, abrasive and friction materials, molding materials

In soaps as disinfectants

Sterilization of surgical goods

Preservative in hair shampoo

Packing Size:

230.00 Kg.Liq

Using Procedure:

Features Type liquid

Brand Name RXSOL chemicals FORMALIN

CAS No. 50-00-0

Purity 37%

Place : Origin Indian Make

Note:

Handling

Use of approved respiratory systems, goggles, gloves & suitable clothing is recommended

Storage

Storable under controlled temperature conditions depending on the specific product grade

Related Products:

Chloro Forom

Chlorine Liquid

Acetic Acid Glacial

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Oxalic Acid

Short Description:

organic compound containing a terminal carbonyl group. It is a colorless.

Formalin manufacturer and supplier in Mumbai, Kolkata, Kandla - Gandhidham, Chennai, Visakhapatnam, Haldia, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, UAE - Middle East, Barka - Muscat - Oman, CANADA BC, Sudan, Yemen, Nairobi Kenya

FORMALDEHYDE LIQUID FORM

1767 reads

Industrial Degreaser Solvent Natural No VOC's

Formulated for use in applications where rinsibility is critical, Natural Solv-S is tested and proven to be a safe, effective and powerful soy cleaner for use in many industries including. We are one of popular to manufacture and supplier of Industrial degreaser solvent based.

Alias:

Natural Degreaser Biodegradable No VOC Natural

Application:

One of the safest, most economical Soy Degreaser / Cleaners biodegradeable degreaser, mastic cleaner.

Non-toxic Solvent
Excellent Rinsibility
Non Abrasive
Concentrated, Economical
VOC Free Solvent

Biodegradable cleaner
High Flash Point
No Caustic Fumes
Stronger Cleaning Power
VOC Free Degreaser

Packing Size:

25.00 Ltr.

Using Procedure:

How to clean oily greasy mess like grease, paint, oil,lubricants and other water insoluble materials, your answer must be use suitable Degreaser.

Note:

Industrial Degreaser Solvent based used in many industries including all such field...

Industrial/Manufacturing
Electronics
Paint Gun Clean-up
Asphalt Maintenance
Graphic & Jet Ink Clean-up
Graffiti Removal
Grease & Oil Clean-up
Mastic Remover

Adhesive Removal
Heavy Lube Clean-up
Tar & Asphalt Removal
Decal Removal
Hydrocarbon Cleaning
Rubber Compound Cleaning
Paint Clean-up
Parts Cleaning Solvent

Related Products:

BioSol Cleaner

CTC Volc Cleaner

Hand Cleaner Paste ( Waterless 500 Gram jar )

DIP-N-CLEAN volc ( Paint Brush equipment Cleaner )

Carbon Eco Clean

Electro Cleaner Electrical Parts Cleaner

Leather Clean Volc Cream

Alkaline Descaler 25 Ltr

Alkali Cleaner RXSOL ORG - 6

Degreaser Non Butyl

Citrus Solvent Natural Paint Thinner

Safety Accessories:

Gloves Disposable

Goggle

PVC Chemical Resistance Boot

Dry Cleaning Solvent

Short Description:

Formulated for use in applications where rinsibility is critical, Natural Solv-S is tested and proven to be a safe, effective and powerful soy cleaner for use in many industries

Industrial Degreaser Solvent emulsify and dissolves most of oily and soily materials quickly and effectively.

How to clean oily greasy messes like grease, paint, oil, lubricants, and other water-insoluble materials, your answer must be to use a suitable Degreaser.

Solvent based Industrial Degreaser manufacturer and supplier in Mumbai MIDC Maharastra, Kandla Gandhidham, Surat Gujrat Chennai - Ennore, Visakhapatnam, Kolkata Haldai, Fujairah, Dubai, Sharjah, Abudhabi, Ruwi Barka Muscat Oman

Solvent Based Degreaser

FAQ:

How to clean oily greasy mess like grease, paint, oil,lubricants and other water insoluble materials?

8709 reads

One Shot Universal Liquitreat 100

Boiler Water treatment specialized is a well - balanced blend for boiler water treatment products, Resulting in a scale and corrosion control by one shot operation. A one-step treatment to control the formation of rust and scale in low pressure and auxillary boilers with working pressure up to 20 bars.

Alias:

RXSOL BWT LIQUID PLUS, Care Treat 3 Boiler 2, Drew Ameroid, Arboiler WT, BWT 104P Nor chem, B.W.T. NEW FORMULA EQUAL TO DREW - AGK 100, DM-511, EAZY BWT-1, MAXTREAT-3222, ONE SHOT BWT 25 Ltr

Active Matter:

54-60

Application:

The dosage rate is dependent on bioler operating condition, feed 2-3 ltrs of RXSOL-50-5001-025 solution for per thousand ltr of bioler water then control the system by periodic Alkalinity test procedure. If p-Alkalinity is below 200 ppm increase the ratio of RXSOL BWT 5001 solution. If p-Alkalinity is above 400 ppm reduce the concentration of RXSOL-50-5001-025 solution by dilution with water. RXSOL-50-5001-025 is strongly alkaline.RXSOL-50-5001-025 is best applied heat or diluted with any convenient strength on a continuous basis using a suitable chemicals pump. The product should be applied to the boiler feed tank or feed line to ensure adequate mixing.

Packing Size:

25.00 Ltr.

Using Procedure:

Control is by simple boiler water tests or RX CLEANSERS can provide a suitable test kits for this purpose.

Used in low pressure and auxillary boilers

:::::::::::::::::::::Alkalinity TEST FOR BOILER & COOLING WATER ::::::::::::::::::::::::

REAGENT & APPARATUS :
Reagent: RXSOL TK 7 , TK 8 , TK 9 , . Apparatus : TEST TUBE , Titrator or DROPPER

PROCEDURE for p-ALKALINITY test ( STEP WISE ):

Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER
Add 1-2 drops of RXSOL TK7 and mix with the stirring rod , If sample turns red / PINK ( which indicates presence of p-Alkalinity ) then follows 3^rd step otherwise if sample remains colourless ( Record p-Alkalinity = 0 ) .
Add RXSOL TK9 drop by drop ( by counting ) , mixing with the stirring rod until colour just disappears. Each drop is equivalent to 25 ppm of p-Alkalinity , expressed as CaCO₃

RESULT : Each DROPS is equivalent to 25 PPM of Alkalinity .

NOTE : p-Alkalinity VALUE = 25 X ( Total Number of DROPS of TK9 , during 3^rdstep )

PROCEDURE for p-ALKALINITY & TOTAL ALKALINITY ( STEP WISE ):

Measure 10 ml of SAMPLE WATER in graduated TEST TUBE / CYLINDER
Add 1-2 drops of RXSOL TK7 and mix with the stirring rod , If sample turns red / PINK ( which indicates presence of p-Alkalinity ) then follows 3^rd step otherwise if sample remains colourless ( Record p-Alkalinity = 0 ) then proceed to STEP- 4.
Add RXSOL TK9 drop by drop ( by counting ) , mixing with the stirring rod until colour just disappears. Each drop is equivalent to 15 ppm of p-Alkalinity , expressed as CaCO₃
Add 2-3 drops of RXSOL TK8 and mix with stirring rod , the sample will turn to BLUISH-GREEN .
AddRXSOL TK9 carefully by counting drop by drop and mixing throughly until a light reddish pink colour develop.

RESULT : Each DROPS is equivalent to 25 PPM of Alkalinity .

NOTE : p-Alkalinity ppm CaCO₃VALUE ( A ) = 25 X ( Total Number of DROPS of TK9 , during 3^rdstep )

Total Alkalinity ppm CaCO₃VALUE = A + { 25 X ( Total Number of DROPS of TK9 , during 5^th step )}

NUMBER OF DROPS OF TK9 p-Alkalinity as CaCO₃

1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>25
2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>50

3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 75
4 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 100

5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > 125
10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > 250

20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > 500
30>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >750

40 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1000

Optimum Result : p-Alkalinity level is between 100 to 150 PPM is suggested.

if p-Alkalinity level is more then 150 ppm then level should be reduced by increased BLOW DOWN process with immediate effect.

For Below 50 ppm , Dose ½ Ltrs of RXSOL-50-5001-025 for 1000 Ltrs of BOILER WATER , to maintain p-Alkalinity level 100 ppm.

Refill pack : REPLACEMENTS

TK7 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available

TK8 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available

TK9 : ECONOMIC PACK ( 100 / 200 / 500 ml ) available

Related Products:

Vapor Treatment

Alkalinity Control

Combotreat Pwd Boiler Treatment Compound

Combotreat Boiler Chemical

BOILPLEX AT Hardness Control

Hydrogen Sulfide Scavenger

Hydrazine Hydrate

Hardness Control Liquid

Diethyl Hydroxyl Amine N,N- DEHA

Safety Accessories:

Boiler Coagulant Sludge Conditioner

Oxygen Scavenger

Article News:

Boiler Maintenance Chemicals

Sodium Hexametaphosphate to precipitate calcium in low-pressure boilers

Chelant Treatment for Boiler

Boiler Treatment tips

Marine Chemicals supplier

Why Marine Chemicals?

Boiler and Cooling Water treatment chemical manufacturer and supplier

Vaptreat Liquid Evaporator Treatment chemicals

Manufacturer Of Water Treatment Chemicals, Water Treatment Raw Materials, BKC, Disinfectants

Boiler Sludge Conditioner Supplier in MIDC, Mumbai and Pawana

Short Description:

A one-step and one SHOT treatment to control the formation of rust and scale in boilers. Contains alkaline compounds, scale and corrosion inhibitors, oxygen scavengers and sludge conditioners

Chemical feed should be continuous. Chemical pumping rates can create problems especially for neat feed set ups. Using on/off feed systems such as a recycle timer can create problems. Chemical feed pumps should be sized or product strengths should be adjusted to allow continuous feed.

Steam and carbon dioxide leave continuously, so setting up a neutralizing amine pump to feed intermittently can lead to wide variations in condensate pH control. If sampling is done from a condensate receiver, the tank volume may buffer the variations and the changes may not be noticed, but corrosion could be occurring to areas of the piping that see the rapidly changing pH.

If polymeric dispersants, phosphonates, phosphate, or chelants are fed intermittently into the feedwater using a recycle timer, and the amines are not fed continuously, a cycle of iron slugs returning in the condensate can be followed by slugs of high dispersancy cleaning of the iron from the deaerator and dragging it into the boiler.

Load changes can affect chemical concentrations when the chemical feed is base fed. Example: Steam production of one million lbs./day; 4% blowdown; 20% active boiler polymer product fed at 5 pounds per day. The calculated daily average polymer concentration would be 24 ppm. Assume peak plant production load is 60,000 lbs./hr., but during the overnight hours the load is only 5,000 lbs./hr. If the dispersant is being fed continuously over the 24 hours, during the 8- hour low load period, the boiler polymer concentration would have increased to over 200 ppm. Upon high fire when production resumes, carryover is very possible because of over concentrating the polymeric dispersant.

Chemical feed needs to be paced to steam production, especially where significant load changes occur.

Carbon dioxide can concentrate in steam and condensate making neutralizing amine treatment impractical. Carbon dioxide levels can be relatively low in steam exiting a boiler at only a few ppm, but if there are areas where it becomes “trapped” and can accumulate, concentrations can reach extremely high levels into the hundreds or even thousands of ppm.

CO2 is a non-condensable gas. It has a distribution ratio in the steam piping and condenses at points throughout the system. At the boiling point, the solubility of the gas in water is extremely low. The solubility of the CO2 is actually lower in the condensate than it is in the steam. For the CO2 to escape from the steam into the water it will accumulate in the steam space just above the water level until the partial pressure becomes high enough for the CO2 in the incoming steam to be able to exit into the condensate. This creates a steady state condition of CO2 coming in and exiting, but an area of severe localized corrosion occurs where the carbon dioxide concentration is high.

The highest CO2 concentration normally occurs just above the condensate water level. If there is an area where condensation is occurring and running down pipes or the sides of vessels, the CO2 concentration will be very high and the pH will be about 5.3 – 5.5 in that location creating high corrosion rates.

The solubility of CO2 increases dramatically as the condensate temperature falls below 212 °F. When there is an accumulation of CO2 in an area and the condensate temperature is relatively low, the amount of carbon dioxide going into solution will be extremely high. Where low-pressure steam is used that contains CO2 and the heat exchange process has relatively close temperature differentials between the steam and the condensate, there is potential for high uptake of the CO2 into the condensate and localized low pH.

Neutralizing amines are selected in an effort to condense in the right concentrations to carbon dioxide condensation levels throughout the steam system. Neutralizing amines cannot control corrosion where this localized accumulation of carbon dioxide occurs since the high CO2 overwhelms the demand for the amine. Even point source addition of amine may not be able to satisfy the demand.

Where the concentrating effect of CO2 occurs, methods of reducing the problem include eliminating or minimizing CO2 in the steam, venting off the CO2 in the localized area, eliminating condensate in the area, applying a filming amine or metal passivator, or using higher temperature steam and increasing condensate temperature to reduce the CO2 content in the condensate.

#BoilerWaterTreatmentCHEMICAL_supplierDUBAI
#BoilerWaterTreatmentCHEMICAL_supplierMUSCAT
#BoilerWaterTreatmentCHEMICAL_supplierMUMBAI
#BoilerWaterTreatmentCHEMICAL_supplierNAIROBI

A one-step and one SHOT treatment to control the formation of rust and scale in boilers. Contains alkaline compounds, scale and corrosion inhibitors, oxygen scavengers and sludge conditioners. which resulting in a scale and corrosion control by one shot operation.

Boiler water treatment speacialized chemical products One Shot Universal Liquitreat Exporter, manufacturer, supplier in Mumbai, Gandhidham - Kandla, Mundra, Sikka, Surat, Kolkata - Haldia, Buz Buj, Paradip, Visakhapatnam - Gangavaram, Fujairah, Dubai, Sharjah, Abu Dhabi, Ruwi Barka Muscat Sohar, Oman, Sudan, Yemen, Nairobi Kenya

BOILER WATER TREATMENT chemicals manufacturer and supplier in INDIA, MUSCAT OMAN, UAE DUBAI, Nairobi

BOILER scale and corrosion control by one shot operation

Read more
9826 reads

L GLUTAMIC ACID

Glutamic acid is an amino acid used to form proteins. In the body it turns into glutamate.

This is a chemical that helps nerve cells in the brain send and receive information from other cells.

Glutamic acid may be involved in learning and memory.

Alias:

L GLUTAMIC ACID food supplement

Application:

Glutamic acid often is used as a food additive and flavor enhancer in the form of its sodium salt, known as monosodium glutamate (MSG).

Packing Size:

25.00 Kg.PWD

Using Procedure:

Glutamic acid is an amino acid used to form proteins. In the body it turns into glutamate. This is a chemical that helps nerve cells in the brain send and receive information from other cells. It may be involved in learning and memory.

Note:

The relatively high glutamate levels in some traditional diets suggest that it is a safe food additive. However, anecdotal and scientific evidence indicates that high levels of glutamate and MSG consumption cause adverse health effects.

Related Products:

GLYCOLIC ACID

Glyceryl Mono Stearate

Egg Albumen Powder

Safety Accessories:

CASTOR OIL Refined

Formalin

D Limonene

Short Description:

L GLUTAMIC ACID

L GLUTAMIC ACID manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.

Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.

L GLUTAMIC ACID is available in small packing as well as in bulk. Buy premium quality L GLUTAMIC ACID and other lab chemicals from one of the most trusted brands.

L GLUTAMIC ACID food supplEment

1284 reads

Search

Pump & Accessory-21