Search

Pump & Accessory-21

PRELOAD Slip HOLD BLOCK

Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE.  Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Alias: 

PRELOAD 300

Active Matter: 
72-75
Application: 

RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels , which carrying corrosive and / or messy cargos  such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface : 
for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface  each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size: 
210.00 Ltr.
Using Procedure: 

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier

Note: 

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo /  Lime wash should be removed .
                    2 > Newly Painted surface should be fully cured.

 

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020,  Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

 

 

Slip Barrier Coat RXSOL HOLD BLOCK  ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

 

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

 

COAL REMOVER rx hold  ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

 

 

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

 

 

Rock Phosphate Cleaner rx hold  ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

 

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains.  Part No.- RXSOL-22-2208-210

 

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

 

 

Related Products: 
ACQUATuff High Foam
ACQUA Tuff High Foam Detergent
AquaaTuff Ship HOLD Cleaner
PCS Hold Clean
Safety Accessories: 
Gloves Disposable
Goggle Chemical Protective
Short Description: 
Polymer BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Hold Block, Slip Barrier Coats HOLD BLOCK, Preload 

Ship hold protective layer coating chemicals. Polymer based water soluble Slip Barrier Polymer Coats HOLD BLOCK is easy to use. There is no any special technical method required to applied on hold surface. Simply dilute the Slip Barrier Polymer Coat with water and spread on entire hold area from top to bottom side. Extra liquidcoming towards bottom can be recollected to cover uncoated area. Simple spray method is helpfull to save time of application.  NOTE - Before application of Slip Barrier Polymer Coat Hold Block clean entire hold surface area and make sure dust free.

Slip Barrier Polymer Coats HOLD BLOCK formulated to perform maximum protection to wards hold surface during transport and save lot of time during unloading operations as cargo doesn't adhere towards hold surface. After unloading of cargo when Aquaatuff High Foam is applied to Slip Barrier Polymer Coat treated hold surface all cargo residue get off without any extra manual force requirement.

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Other Important materials , which help to control corrosion on metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and usingprocedure.

RXSOL Bilge Coat (Sulphur Acid Neutralizer)  Acts as Acid Neutralizer formed during sulphur voyages. 

Before loading of cargo Slip Barrier Coat paint/film can be wise decision to save time for next cargo. As Slip Barrier Coat hold block acts as the barrier film in between cargo and holds surface, So deposition of cargo directly on hold is not possible, and it can be removed easily without scrapping. And Slip Barrier Coat also provide protection against corrosiveness of cargo bye product.

 

Application of Slip Barrier Coat is just like a lubricant, As it is water soluble polymerized products. This product can be simply spray on the entire surface by manually or through spray machine. And after application of Slip Barrier Coat Its removal is also very easy process. Only by using hold wash with water can remove all coating of Slip Barrier Coats HOLD BLOCK.

 

As before application of Slip Barrier Coat, Proper uses of hold cleaning chemicals like RXTUFF ALKALINE or ALKAATUFF can save required qty of Slip Barrier Polymer Coats HOLD BLOCK as hold block coating.

Slip Barrier Polymer Coat and Slip Barrier Polymer Coat plus MSDS available with each and every drum. And MSDS also can be download through our website directly by using USER NAME and password. 

Ready stock of Slip Barrier Polymer Coat Preload supplier in Gandhidham - Kandla, Mundra, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Mumbai - Nhava Seva, Surat in India and  Fuajirah - Dubai, Sharjah in GULF - Middle East.

Also we are keeping ready stock of Muriatic Acid, ALKATUFF High Foam ship hold cleaning chemicals, PCS, Coal Remover, Lime Remover,  Alka cleaner etc... Full range of marine chemicals.

Resulting thin transparent temporary Polymer film

  • 888 reads

Soil Cutter HD

Its unique and heavy duty formula Quickly Cuts Into Grease & Tough Soil Deposits. Which eliminates Time & Labour Saver For Heavy Duty & General Maintenance Cleaning.

pH  DEGREASER & CLEANER

Alias: 

SOIL OUT, SOILUX LAUNDRY

Application: 

Due to fast reaction It Penetrates deeply into concrete surfaces.  Formula contains low-foaming emulsifiers and is biodegradable, phosphate free, rust-inhibitive, nonpolluting and nonflammable.  Specially formulated (Low Foaming RXSOL) for use in parts washers, automatic jet spray washers, or automatic or conventional scrubbers.  Mop or spray application rinses freely with water.

 

Packing Size: 
20.00 Kg.PWD
Using Procedure: 

This highly concentrated, low/medium-foam cleaner/degreaser instantly dissolves and emulsifies heavy dirt, grease, oils, detergent film and many other surface stains. 

Note: 

Description:

A special blend of  water based chemical solvents for tough, heavy duty cleaning

  • Instantly dissolves & emulsifies grease, oils & other heavy soil deposits.
  • Rust-inhibiting formula.
  • Nonpolluting & Nonflammable
  • Phosphate free & biodegradable
  • Also removes waxes & old soap film.
  • Excellent for degreasing machinery, parts, floors, automotive engines, and parking areas.
  • Designed for use in parts washers, enclosed jet-spray washers, conventional & automatic scrubbers.
Related Products: 
Fabrics Laundry Softner Fabsoft
Laundry Emulsifier Surfactant
Carpet Soil Cleaner MEGA PACK
Protein Stain Spotter
Safety Accessories: 
Gloves Disposable
Goggle
Short Description: 
Heavy duty Grease & Soil Cutter Its unique and heavy duty formula Quickly Cuts Into Grease & Tough Soil Deposits . which eliminates Time & Labour Saver For Heavy Duty & General Maintenance Cleaning.

Grease Soil Cutter HD manufacturer and supplier in Muscat Barka Oman, Fujairah Dubai Sharjah Abudhabi Ajman UAE Middle East, Nairobi Kenya Africa, Mumbai, Gandidhdam Gujrat, Vizag Visakhapatnam, Chennai Tamilnadu, Kolkata Bengal, Canada

Laundry Soil Cutter

  • 864 reads

Descalant Chemical

Alias: 

LIME-OUT, ANTISCALLENT, DESCALER MTA, SCALESOL, Care Clean HDD, Eazy Descaler, DESCALE IT, 651 571563, Max Clean 05, Diesel Engine Cooler Descaling Chemical, Highly Effective Descalant Chemical SG 1202, Maxtreat 3002 Engine Cooler Cleaner 25 Ltr

Active Matter: 
68 - 72%
Application: 

Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form..

Heat Losses in Boiler due to scale

Thickness of Scale Increase in fuel consumption due to scale
   
0.5 mm

2 %

1 mm

4 %

2 mm

6 %

4 mm ( 0.125” )

10 %

8 mm ( 0.25” )

20 %
16 mm ( 0.5” )

40 %

30 mm (1” )

80 %

Packing Size: 
25.00 Ltr.
Using Procedure: 

RXSOL-11-1008-025  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of RXSOL-11-1008-025 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  RXSOL-10-1005.

RXSOL-11-1008-025 should be mixed with fresh water to form a solution of 5-30%, depending on the extent of scaling.

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  RXSOL-20-2005  (  www.rxmarine.com/alkaleen-liquid-heavy-duty-25-ltr  ) in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

RXSOL-11-1008--DC should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008--DC Boilers, See Rx cleansers Practical Application Manual

Note: 

After using  RXSOL-11-1008-025, Rinse all metal surfaces with 0.5 percent of RXSOL-20-2059-025, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL 1008 .
    RXSOL 1008  is safer for the employees to use than other acid products.

  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).

  •  Cleans down to the original surface without pitting.
  •  RXSOL 1008 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL 1008  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.

Descaling Chemical manufacturers, Descaling Chemical suppliers, Descaling Chemical producers, Descaling Chemical exporters

Related Products: 
Safe Acid Descale Powder
Descaling Scalefoe Compound
Alkaline Descaler 25 Ltr
Safety Accessories: 
Hand Gloves Chemical resistance
Chemical Handling Apron
Video Links: 
Descalant Chemical SCALE dissolver
Short Description: 
Scales are damaging the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all

A powerful sequestrant and descaling chemicals for iron scales dissolving and cleaning in BOILER and COOLING system.

Descaling Liquid manufacturer and supplier in Navi Mumbai MIDC, Mumbai, Nashik, Pune, Taloja MIDC, Rabale, Turbha, Pawana MIDC, Gandhidham, Kandla, Jamnagara, Mundra, Sikka, Surat, Hazira, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai Ennore, Goa, Manglore, Dubai, Sharjah, AbuDhabi, Ajman, Diera, UAE Middle East, Oman Muscat - Barka, Nairobi Kenya Africa, Uganda

Highly Effective Descalant Chemical.

Introduction:

RXSOL Highly Effective Descalant Chemical is a powerful descaling chemical. Recommended for descaling if pipelines, heat exchangers, boiler tubes, vessel

jackets, cooling coils etc.

Product Specifications:

Appearance : Pale Yellow to Dark Yellow liquid

Specific Gravity : 1.02 – 1.26

pH : Acidic

Features:

>> Chemically Stable. Shelf life: 3 Years from date of manufacturing.

>> Available in liquid form, can be dosed easily.

>> It is incorporated with powerful corrosion inhibitor. After descaling is done, the base metal is protected.

>> Can be used for on line descaling

>> Removes hard, difficult to remove scales.

>> Heat transfer is improved.

>> Can be used for ferrous and non-ferrous metals.

Dosage:

The dosage required depends on system water chemistry and operating conditions.

RXSOL Highly Effective Descalant Chemical should be diluted with water before circulation. In case the scaling is more, or descaling is done for the 1st time,

the dilution should be done in the ratio of RXSOL Highly Effective Descalant Chemical : Water :: 1: 5

For routine, preventive maintainence purpose, the dilution can be done upto: RXSOL Highly Effective Descalant Chemical : Water :: 1:10

Our technical representative shall study the system and recommend the required dosage.

We undertake the descaling on contract basis, in which, our expert representative carries out the descaling program at

your site.

Storage and Handling

The product is supplied in HDPE corbouys. It should be stored in a cool and dry place. The shelf life is 36 months from

date of manufacture.

DO NOT USE CONTAINERS FOR POTABLE WATER STORAGE.

USE OF PERSONNEL PROTECTIVE EQUIPMENTS LIKE HAND GLOVES, SAFETY GOGGLES, FACE MASK ARE

HIGHLY RECOMMENDED WHILE HANDLING THE PRODUCT.

In case of contact with skin, immediately wash with copious amount of water and soap. In case of eye contact, immediately flush with large amount of water for at least 15 minutes and get medical attention Refer to Material Safety Data Sheet for proper handling and storage of the product.

Descaler Highly Effective Descalant Chemical

Cold Flow Improver Middle Distillates Diesel

Alias: 

Diesel Antigel Fuel Lubricator

Active Matter: 
99-99.5
Application: 

Suitable for all diesel engines, Tank  and facility use. Also for all heating oil tanks. Helps to prevent cold start and cold running problems in low temperature climate circumstances by anti-gel performance. With Diesel Cold Flow Improver, it is possible to lower the temperature at which the wax crystals will block the filters (Cold Filter Plugging Point) and the temperature at which the diesel freezes (Pour point).

Packing Size: 
25.00 Ltr.
Using Procedure: 

Operating instructions

In diesel : Add to fuel tank before it reaches the 0 °C limit.
With heating oil: Add to tank before it reaches the 0 °C limit.

Dose ::

RXSOL CFID  should be dosed to the fuel tank prior to filling. Recommended dosage is one liter to one thousand liter of fuel (1:1000 or 1000 ppm). In case of poor response dosage can be increased to one liter to five hundred liter of fuel (1:500 or 2000 ppm)

Please note: The dosing temperature should always be at least 5oC above the measured cloud point of the fuel.

 

Dosage of product        1 ton fuel / Diesel 10 ton fuel / Diesel 50 ton fuel / Diesel 100 ton fuel / Diesel
1000 ppm Dose 1 ltr Dose 10 ltr Dose 50 ltr Dose 100 ltr
2000 ppm Dose 2 ltr . Dose 20 ltr  Dose 100 ltr  Dose 200 ltr 
Note: 

Features

  • Cold flow improver and pour point depressant
  • Delays the onset of paraffin crystallization to improve cold flow properties

Benefits

  • Enables you to handle the fuel at lower temperatures
  • Adds safety in handling of the fuel by reducing the pour point and the Cold Filter Plugging Point of the fuel
  • Keep the wax in suspension preventing wax sedimentation and accumulation
Related Products: 
Fuel Oil Treat FOT
Dual Purpose Plus
Valvocare Fuel Additive
Safety Accessories: 
Latex Gloves (1 Box = 100 Pcs)
Goggle Chemical Protective
Short Description: 
Highly effective flow improver Stop Gelling, Increase Lubricity PREVENTS DEPOSITIONfor heating oil, diesel and super diesel.

Cold Flow Improver Middle Distillates Diesel manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Cold Flow Improver Middle Distillates Diesel at a competitive price from us. We have ready stock of Cold Flow Improver Middle Distillates Diesel in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Diesel Antigel Fuel Lubricator

Ductile Iron AODD Pumps Air Operated Diaphragm Pump

Ductile Iron AODD Pumps suitable for muck transfer, slurry semi solid transfer, also for removal of underground water or drift water from mine sites,

Ductile iron pumps are ideal for the toughest outdoor and underground duty also can be used for oil transfer and general utility use.
 

Alias: 

Ductile Iron AODD Pumps

Application: 

1.Ductile iron pumps are ideal for the toughest outdoor and underground duty.
2.Polypropylene Air Operated Diaphragm Pump is Best suitable for ACIDIC and Alkaline solution liquid.
3. Stainless Steel pumps are used for high pumping performance and heavy duty work while Aluminum pumps main feature is their portability due to the light weight to pumping capacity.

Packing Size: 
1.00 No
Using Procedure: 

1 . No electrical motor - non sparking.

2.    No mechanical seals or glandpacking.

3.    Thepumpscanrundryindefinitelywithoutdamage.

4.    Safe for use in hazardous/exolosiveenvironments.

5.    Variableflow-simplyregulatetheinletairsupplytoadjustthepumpflowfromzerotomax.

6.    If dischargeiscloggedorclosedpumpstopsimmediately;nopowerconsumed,nowear.By opening discharge, flow startsautomatically.

7.    Self-primingfromadrystartupto6meterswithoutafootvalve.

8.    Pressure up to 100 PSI (7bar).

9.    Operates submerged or with floodedsuction.

10.  Noclosefitting,slidingorrotatingpartssocanhandleawiderangeoffluidswithhighsolidcontent.

11.    Gentle non-shearinganion.

12.Quickassemblyanddisassemblywithsplitclampbands.
13.Pumpsarelightweightandportable.

Note: 

We are keeping full range of Diaphragm Pumps :

Air Operated Double Diaphragm Pumps

Aluminium Air Operated Double Diaphragm Pumps

Polypropylene Air Operated Double Diaphragm Pumps

Stainless Steel Air Operated Double Diaphragm Pumps

Ductile Iron Air Operated Double Diaphragm Pumps

Short Description: 
Diaphragm Wilden Pumps supplier

Diaphragm pump 1 Inch to 3 Inch Aluminium Buna distributor and supplier in Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham Kandla Gujrat, UAE Middle East - Sharjah, Dubai, Ajman Jurf, Abudhabi, Fujairah, Muscat - Barka Oman Sohar, Middle East, Nairobi Kenya Africa.

Ductile Iron AODD Pumps

Aluminium AODD Pumps

Aluminium AODD Pumps most commonly used for pumping of water and water based liquid, oily fluids. Not suitable for ACIDIC or ALKALI higher concentration. But can be used for diluted acidic or alkali concentrations liquid.

Alias: 

Aluminium AODD Pumps Diaphragm Pump

Application: 

Aluminum pumps main feature is their portability due to the light weight to pumping capacity. 

Packing Size: 
1.00 No
Using Procedure: 

1 . No electrical motor - non sparking.

2.    No mechanical seals or glandpacking.

3.    Thepumpscanrundryindefinitelywithoutdamage.

4.    Safe for use in hazardous/exolosiveenvironments.

5.    Variableflow-simplyregulatetheinletairsupplytoadjustthepumpflowfromzerotomax.

6.    If dischargeiscloggedorclosedpumpstopsimmediately;nopowerconsumed,nowear.By opening discharge, flow startsautomatically.

7.    Self-primingfromadrystartupto6meterswithoutafootvalve.

8.    Pressure up to 100 PSI (7bar).

9.    Operates submerged or with floodedsuction.

10.  Noclosefitting,slidingorrotatingpartssocanhandleawiderangeoffluidswithhighsolidcontent.

11.    Gentle non-shearinganion.

12.Quickassemblyanddisassemblywithsplitclampbands.
13.Pumpsarelightweightandportable.

Note: 

We are keeping full range of Diaphragm Pumps :

Air Operated Double Diaphragm Pumps

Aluminium Air Operated Double Diaphragm Pumps

Polypropylene Air Operated Double Diaphragm Pumps

Stainless Steel Air Operated Double Diaphragm Pumps

Ductile Iron Air Operated Double Diaphragm Pumps

Short Description: 
Diaphragm Wilden Pumps supplier

Diaphragm pump 1 Inch to 3 Inch Aluminium Buna distributor and supplier in Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham Kandla Gujrat, UAE Middle East - Sharjah, Dubai, Ajman Jurf, Abudhabi, Fujairah, Muscat - Barka Oman Sohar, Middle East, Nairobi Kenya Africa.

Aluminium AODD Pumps Diaphragm Pump

  • 562 reads

Stainless Steel AODD Pumps

Stainless Steel AODD Pumps best sutable for HOT LIQUID transfer also usefull for ACIDIC and ALKALI Liquid transfer.  While Aluminium AODD Pumps most commonly used for pumping of water and water based liquid, oily fluids. Not suitable for ACIDIC or ALKALI higher concentration. But can be used for diluted acidic or alkali concentrations liquid.

Alias: 

Stainless Steel AODD Pumps Diaphragm Pump

Application: 

Stainless Steel pumps are used for high pumping performance and heavy duty work while Aluminum pumps main feature is their portability due to the light weight to pumping capacity.

Packing Size: 
1.00 No
Using Procedure: 

1 . No electrical motor - non sparking.

2.    No mechanical seals or glandpacking.

3.    Thepumpscanrundryindefinitelywithoutdamage.

4.    Safe for use in hazardous/exolosiveenvironments.

5.    Variableflow-simplyregulatetheinletairsupplytoadjustthepumpflowfromzerotomax.

6.    If dischargeiscloggedorclosedpumpstopsimmediately;nopowerconsumed,nowear.By opening discharge, flow startsautomatically.

7.    Self-primingfromadrystartupto6meterswithoutafootvalve.

8.    Pressure up to 100 PSI (7bar).

9.    Operates submerged or with floodedsuction.

10.  Noclosefitting,slidingorrotatingpartssocanhandleawiderangeoffluidswithhighsolidcontent.

11.    Gentle non-shearinganion.

12.Quickassemblyanddisassemblywithsplitclampbands.
13.Pumpsarelightweightandportable.

Note: 

We are keeping full range of Diaphragm Pumps :

Air Operated Double Diaphragm Pumps

Aluminium Air Operated Double Diaphragm Pumps

Polypropylene Air Operated Double Diaphragm Pumps

Stainless Steel Air Operated Double Diaphragm Pumps

Ductile Iron Air Operated Double Diaphragm Pumps

Short Description: 
Diaphragm Wilden Pumps supplier

Diaphragm pump 1 Inch to 3 Inch Aluminium Buna distributor and supplier in Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham Kandla Gujrat, UAE Middle East - Sharjah, Dubai, Ajman Jurf, Abudhabi, Fujairah, Muscat - Barka Oman Sohar, Middle East, Nairobi Kenya Africa.

Stainless Steel AODD Pumps Diaphragm Pump

  • 520 reads

Polypropylene Air Operated Diaphragm Pump

Polypropylene pumps are a suitable low cost alternative to SS pumps Also suitable for Good for acids and alkalis But not suitable for HOT Liquid transfer. 
While Stainless Steel AODD Pumps best sutable for HOT LIQUID transfer also usefull for ACIDIC and ALKALI Liquid transfer.  And  Aluminium AODD Pumps most commonly used for pumping of water and water based liquid, oily fluids. Not suitable for ACIDIC or ALKALI higher concentration. But can be used for diluted acidic or alkali concentrations liquid.

Alias: 

Polypropylene Air Operated Diaphragm Pumps, PP Air Operated Diaphragm Pumps

Application: 

Polypropylene Air Operated Diaphragm Pump is Best suitable for ACIDIC and Alkaline solution liquid.
Stainless Steel pumps are used for high pumping performance and heavy duty work while Aluminum pumps main feature is their portability due to the light weight to pumping capacity.

Packing Size: 
1.00 No
Using Procedure: 

1 . No electrical motor - non sparking.

2.    No mechanical seals or glandpacking.

3.    Thepumpscanrundryindefinitelywithoutdamage.

4.    Safe for use in hazardous/exolosiveenvironments.

5.    Variableflow-simplyregulatetheinletairsupplytoadjustthepumpflowfromzerotomax.

6.    If dischargeiscloggedorclosedpumpstopsimmediately;nopowerconsumed,nowear.By opening discharge, flow startsautomatically.

7.    Self-primingfromadrystartupto6meterswithoutafootvalve.

8.    Pressure up to 100 PSI (7bar).

9.    Operates submerged or with floodedsuction.

10.  Noclosefitting,slidingorrotatingpartssocanhandleawiderangeoffluidswithhighsolidcontent.

11.    Gentle non-shearinganion.

12.Quickassemblyanddisassemblywithsplitclampbands.
13.Pumpsarelightweightandportable.

Note: 

We are keeping full range of Diaphragm Pumps :

Air Operated Double Diaphragm Pumps

Aluminium Air Operated Double Diaphragm Pumps

Polypropylene Air Operated Double Diaphragm Pumps

Stainless Steel Air Operated Double Diaphragm Pumps

Ductile Iron Air Operated Double Diaphragm Pumps

Short Description: 
Diaphragm Wilden Pumps supplier

Diaphragm pump 1 Inch to 3 Inch Aluminium Buna distributor and supplier in Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham Kandla Gujrat, UAE Middle East - Sharjah, Dubai, Ajman Jurf, Abudhabi, Fujairah, Muscat - Barka Oman Sohar, Middle East, Nairobi Kenya Africa.

PP Air Operated Diaphragm Pumps

Silicon Manganese

In electric submerged-arc furnaces Silico-manganese is chemically manufactured by silico-thermic reduction, using manganese ores and/or slags from the production of ferro-manganese. Silicon Manganese is an alloy of manganese, silicon and iron. It is a cost- effective blend of manganese and silicon for the steel manufacturer. Silico Manganese also consumed in all steel products and used in higher quantities in 200 series stainless steel, alloy steel and manganese steel.

Alias: 

Silico Manganese

Application: 

Silicon Manganese Precise content of manganese & silicon which helpful to Sturdiness, High strength.

Presence of Silicon Manganese in steel Iron increasing deoxidising property in the Iron. As Silicon Mamganes have Excellent chemical properties as Deoxidizer.

Packing Size: 
50.00 Kg
Using Procedure: 

RXSOL Silicon Manganese Configurationis Low carbon, low boron, low Ti, Low P, High mn.

Note: 

Difference between ferro manganese and silico manganese?

 

Ferro manganese is a  alloy of manganese containing manganese and iron with some amount of carbon, While silico manganese contains silicon and manganese along with some amount of carbon.

Related Products: 
Activated Carbon Acid Washed
BORAX
SODA ASH 25 Kg
Short Description: 
In electric submerged-arc furnaces Silico-manganese is chemically manufactured by silico-thermic reduction, using manganese ores and/or slags from the production of ferro-manganese.

Silico Manganese manufacturer and exporter from India.

Ferro Alloy

  • 1103 reads

Sulfamic Acid Inhibited

Sulfamic Acid Inhibited - Sulfamic Descalant

Alias: 

Sulfamic Acid with Corrosion Inhibitor, Accepta 2316, Inhibited Sulphamic Acid

Active Matter: 
95-96
Application: 

White crystalline soild, non volatile, non volatile, non hydroscopic. Soluble in water and odorless. Toxic by ingestion.

Uses: Metal and ceramic cleaning, amine sulfamates, ph control, hard water scale removal, electroplating.

At room temperatures, dilute aqueous Sulfamic Acid solution is stable for a long time but rapid hydrolysis occurs at elevated temperatures. Its solution is less corrosive toward metals than other mineral acid. When compared to most of the common strong mineral acids, Sulfamic Acid has desirable water descaling properties, low volatility, low toxicity and is a water soluble solid forming soluble calcium and iron-III salts. Because of its many positive attributes like handling ease, solubility and low corrosiveness, Sulfamic Acid is used for many diversified applications.

APPLICATIONS OF SULFAMIC ACID ---
•    Used as an immersion liquid
•    Used as filling with a Sulfamic acid descalant solution
•    Used through circulation for consistent concentration though the closed circuit
•    Used in cold as well as with temperature ranging from 40º to 60ºC
•    Sulfamic Acid is a very safe and highly effective descalant
•    Sulfamic Acid provides good cleaning and reduces manual cleaning.
•    Sulfamic acid is recommended for the cooling water for descaling the condenser on running plant basis.

Applications Of Sulphamic Acid:

Sulphamic acid in descaling

Sulphamic Acid is super efficient descaling agent and is used for cleaning a variety of industrial equipment and domestic appliances.

Sulphamic acid in paper & pulp Industry

Sulphamic Acid prevents pulp degradation due to temperature at the chlorination and hydrochloride stage. It permits bleaching at higher temperature and lower PH without loss of strength.

Sulphamic acid is used in manufacturing of Dyes, Pigments and in the dyeing of leather

Sulphamic Acid removes excess of nitrides used in the diazotization reactions in the manufacturing of dye stuffs and pigments. Nitrides if present in process water of effluents can also be removed by using Sulphamic Acid

Sulphamic acid in Chlorine Stabilization

Chlorine gas in water form HOCL which reacts with Sulphamic Acid form N-Chloro-Sulphamic Acid to N-ChloroSufamic Acid more stable and yet has active chlorine, Because of this, Sulphamic Acid is used for stabilizing chlorine in swimming pools and cooling towers.

Sulphamic acid in Electroplating and Electro-refining

Metal sulphamate electrolytes values for their high solubility cadmium, cobalt nickle, lead silver and radium sulphamte deposits are bright and dense. Lead sulphamate is used in refining lead when a high quality is desired.

Sulphamic acid in Sulphation and Sulphamation

Sulphamic acid is used for sulphation and sulphamation of many organic compounds. Sulphation of aklyl pheno-ethylen oxide condensation products 9for detergents and sulphation of ethoxylated phenol-formaldehyde resins is preferable with Sulphamic Acid. Stronger agents cause unwanted ring sulphomation.

Sulphamic acid in the Plastic industry

Sulphamic acid finds application in the plastic wherever a curing agents is required which does not have the disadvantage of inorganic acids and which acts faster than organic acids.

Packing Size: 
25.00 Kg.PWD
Using Procedure: 

DIRECTION OF USAGE

•    Machines should be rinsed with water to remove loose flakes & sludge's before use
•    Powder should be added to warm water for an ideal solution
•    Sample should be properly tested before using
•    Proper ventilation is essential for effective usage of Sulfamic Acid Descalant
•    After cleansing, the solution should be drained out and the system should be rinsed with     water until pH value is neutral
•    Rinsing with ROTO PASS – 212 for better metal prevention and passivation is recommended

Note: 

Packing of Sulphamic acid ( NH2SO3H or H3NO3S )

Sulphamic Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on request. 

Advantages of using Sulphamic Acid

  • Sulphamic Acid has very high shelf life.
  • Sulphamic acid do not require storage/handing arrangement hence no adulteration possible.
  • Sulphamic acid has very high effectivity of the descaling.
  • Complete cleaning can be chemically achieved by Sulphamic acid and does not require post descaling manual cleaning.
  • Sulphamic acid is safe acid, packed in 50 kgs HDPE bags and has no handling hazards.
  • No storage tanks / system required for dosing.
  • The solid can be directly charged to system eliminating the cost of system reduces the leave of scaling solids and acts as anti - descalant.
  • Accidental excess dosing does not affect the metal of the circulating system but it acts to remove the deposited scale from the system.
  • It is recommended to does into the cooling water for descaling the condenser on running plant.

     

   Sulfamic Acid is used for descaling.

•    Sulfamic Acid is very efficient descaling agent and is widely used for cleaning a variety of industrial equipments, especially boilers, condensers, cooling tower and pipelines.

•    In paper & pulp Industry, Sulfamic Acid is used to prevent pulp degradation due to temperature conditions existing at the chlorination and hydrochloride stage. Sulfamic Acid also permits bleaching at higher temperature and lowers pH without loss of strength of fiber.

•    Sulfamic acid is used in manufacturing of Dyes, Pigments and in the dyeing of leather.

•    Sulfamic Acid removes excess of nitrides used in the diazotization reactions in the manufacturing of dye stuffs and pigments. Nitrides, if present, in process water of effluents can also be removed by using Sulfamic Acid.

•    In Chlorine Stabilization, Chlorine gas in water form HOCL which reacts with Sulfamic Acid form N-Chloro-Sulphamic Acid to N-ChloroSufamic Acid more stable and yet has active chlorine, Because of this, Sulfamic Acid is used for stabilizing chlorine in swimming pools and cooling towers.

•    In Electroplating and Electro-refining, Metal sulphamate electrolytes values for their high solubility cadmium, cobalt nickle, lead silver and radium sulphamte deposits are bright and dense. Lead sulphamate is used in refining lead when a high quality is desired.

•    In Solutation and Sulphamation, Sulfamic Acid is used for sulphation and sulphamation of many organic compounds. Sulphation of alkyl pheno-ethylen oxide condensation products for detergents and sulphation of ethoxylated phenol-formaldehyde resins is preferable with Sulfamic Acid. Stronger agents cause unwanted ring sulphomation.

•    In the Plastic industry, Sulfamic Acid finds application in the plastic wherever a curing agent is required which does not have the disadvantage of inorganic acids and which acts faster than organic acids.

Other Applications

•    Sulfamic Acid is preferred greatly to Hydrochloric Acid in household usage for its intrinsic safety value.

•    Sulfamic Acid is used in the design of many types of therapeutic agents such as Antibiotics, Nucleoside/nucleotide Human immunodeficiency virus (HIV) reverse transcriptase inhibitors, HIV protease inhibitors (PIs), anti-cancer drugs (steroid sulfatase and carbonic anhydrase inhibitors), anti-epileptic drugs, and weight loss drugs.

•    Sulfamic Acid is used as an acidic cleaning agent for metals and ceramics.

•    It is used frequently for removing rust and limescale.

•    Sulfamic Acid is used in the industrial cleaning of dairy and brew-house equipment.

•    It is used as a catalyst for esterification process.

•    Sulfamic Acid is used in Dye and pigment manufacturing.

•    Sulfamic Acid is used as an Ingredient in Denture Tablets, Fire Extinguishing Media.

•    Sulfamic Acid is used in Pulp and paper industry as a chloride stabilizer.
 

Related Products: 
Descalant Powder with Colour Indicator
Lime Scale Remover
Descaling Scalefoe Compound
CITRIC ACID ANHYDROUS
Safety Accessories: 
Chemical Protective Suit
Goggle Chemical Protective
Article News: 
NON-CHLORIDE BASED DESCALING CHEMICAL POWDER
Short Description: 
Sulphamic acid can be used for removing scales obtained from water in heating and cooling systems e.g. boilers, condensers, heat exchangers, jackets and coils

Application and Dosage

It Is A Non-Inflammable And Biodegradable Chemical Compound And Does Not Give off Obnoxious Fumes. The Method of Using Samrat Industries Inhibited Sulfamic Acid Is Very Simple And Basic.

 

 

Prepare A Solution of 5-10% W/W of RXSOL Inhibited Sulfamic Acid In Preheated Water (preferably) At 70-80oc. The Descalant Solution Should Be Prepared About 20% In Excess of The System Hold Up Volume. Re-Circulate The Solution Using An Acid Compatible Pump. After Descaling Is Completed, Flush Out The Solution And Rinse Once With Plain Water. Neutralize The System With 2% W/W RXSOL RXSOL-20-2004-025 In Water And Recirculate For An Hour. Flush Out The Solution And Return System To Normal Service.

 

Synonyms of Sulphamic Acid: SULFAMIC ACID, Sulfamidic acid, Amidosulfonic acid, Jumbo, Sulphamic acid, Amidosulfuric acid, Aminosulfonic acid, Imidosulfonic acid, Sulfaminic acid, Aminosulfuric acid, Sulphamidic acid, Sulfamidsaeure, sulfuramidic acid, Amidoschwefelsaeure, Kyselina sulfaminova 

Manufacturing, supplying and exporting of Sulphamic Acid. Our company Established in the year 1995 and we are involved in manufacturing supplying and exporting of various industries-based products.

#InhibitedSULFAMICacid_supplier
#sulfamicACIDinhibited_manufacturer
#Sulfamic_MuscatOMAN
#sulfamic_DUBAIuae

INHIBITED SULFAMIC ACID

Sulfamic Acid Combined With Corrosion Inhibitor And Wetting Agent, To Provide Corrosion Protection To Metal During Descaling And Giving Optimum Cleaning of Water Side of Heat Exchangers And Boilers.

 

It Also Aids In Removal of Loose Corrosion Products, Organic Foulants, Dirt, Clay And Silt Deposits. It Is Used For Descaling of High And Low Pressure Boilers, Heat Exchangers Etc., And Is Safe For Aluminum, Stainless Steel, Carbon Steel, Mild Steel, Cast Iron, Brass, Admiralty Metal, Titanium, Copper And Copper Alloys, Pvc Plastic, Rubber Or Leather When Used As Directed.

Trader, Manufacturer, Supplier and  exporter of Inhibited Sulphamic Acid.

Sulfamic Acid manufacture, exporter and supplier in India UAE Middle East, Oman, Nairobi Kenya. Sulfamic Acid supplier in Mumbai, Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, Barka Muscat Ruwi, Salalah, sohar, Oman, Africa, Canada

Key Features and Benefits

Effective Removal of Hard Scale Deposits From Heat Exchanger

Eventually More Economical Than Raw Sulfamic Acid Because About 5-6% of The Raw Acid Strength Is Used Up In Corroding The Metallurgy And Causes Metal Loss

Corrosion Inhibited And Safe For System Metal And Components

Excellent Wetting Characteristics To Aid In Removal of Organic And Greasy Foulants

Biodegradable Product

Easy To Handle

 

 

Handling Measures and Precautions

Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.

 

Storage

This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

 

Packing

RXSOL Inhibited Sulfamic Acid Is Available In 25, 50kgs PACK.

Inhibited Sulphamic Acid

stock-clearance.png