Cooling Water Chemical-43

Slip Barrier Coats HOLD BLOCK

Alias: 

Slip Barrier Coats HOLD Block Resist, RBM HOLD BLOCK, GREEN BARRIER, HOLD SURFACE PROTECTOR, PRELOAD 300, HOLD BARRIER XR, Paint Protector

Active Matter: 
72-81
Application: 

Slip Barrier Polymer Coats HOLD BLOCK is a  Heavy Duty protective Solution for hold of vessels,  which carrying corrosive and / or messy cargos  such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface : 
for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

 

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface  each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

 

Packing Size: 
25.00 Ltr.
Using Procedure: 

for HANDYMAX  (5 Holds) : In general  500 Ltr to 1000 Ltr   RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX    (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Note: 

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo /  Lime wash should be removed .
                     2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020,  Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

 

 

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK  ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

 

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

 

COAL REMOVER rx hold  ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

 

 

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

 

 

Rock Phosphate Cleaner rx hold  ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

 

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains.  Part No.- RXSOL-22-2208-210

 

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

 

 

Short Description: 
Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.
Information: 

Polymer based water soluble liquid product which is resulting thin transparent and  temporary film on cargo hold surfaces. Polymer based Thin film acts as barrier layer between the cargo and the ship hold surfaces.

 

Slip Barrier Coats HOLD BLOCK is a Heavy Duty protective Solution for the hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly.
$ Safe to use in occupied / covered areas.
$ Reduces turn around times.
$ Easy to Direct Spray.
 

Other Important materials, which help to control corrosion on the metal surface. Chemically SULPHUR producing STRONG acid in presence of  moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedures.

RXSOL Bilge Coat (Sulphur Acid Neutralizer)  Acts as Acid Neutralizer formed during sulphur voyages

HOLD BLOCK chemicals supplier.

FAQ - Slip Barrier Polymer Coat

Capt. ravi.prakash 4:54 PM (3rd JAN'19)
to RX MARINE INTERNATIONAL 
Dear Sir,
Ref our telcon, please find attached Hold photos after discharging of Australian Coal and cleaning (without applying any chemicals) in oct 2018 . Then vsl loaded Indonesian Coal and will be discharging same in abt a week. Next voyage is getting fixed to load Urea from Saudi. Basis the photos, which chemical would you suggest to be used. We were thinking of RXSOL PCS along with Alkaatuff. Fyi, Owners have supplied 1200 Ltrs of Alkaatuff HF last month. 
Thanks & best regards,
Capt. ravi.prakash
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Dear Sir,

In image we can observe that BOTTOM line of hold is rusted, And your plan to load CLEAN CARGO like urea which is ammonia-ted product can result further heavy rusting. So here our suggestion is to go with PCS with Alkaatuff HF. And after cleaning hold rust can be treated with RUST CONVERTOR by the ratio of 1:100 Ltr with water, this will change free iron rust content to orginal metal colour. ( For treatment of rust Each Hold  maximum 50 Ltr RUST CONVERTOR REQUIRED ) and Finally HOLD can be treat with SLIP barrier Polymer COAT polymer, with dilution ration of 1:100 Ltr with Water. ( For Each Hold polymer coating  maximum 50 Ltr Slip Barrier Polymer Coat REQUIRED )

Refer this link to get IMAGE of CARGO HOLD. http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx 

USES of slip barrier coat provide transparent POLYMER layer in between UREA and HOLD surface.

Application of SLIP Barrier Polymer COAT is always be wise decision, this will not only protect hold metal surface from UREA contact, but also helps to release cargo without adhesion on cargo.

 

Thanking you

WBRGDS

Silvi

http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

Slip Barrier Polymer Coats HOLD BLOCK supplier in all major port of India and Middle East. We are keeping ready stock at Kandla, Mundra, Sikka, Navlakhi, Hazira, Mumbai, JNPT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Slip Barrier Polymer Coats HOLD BLOCK also works as surface releasing agent and due to its chemicals resitance nature protect metal surface of ship from hazardous cargo.

Protective Chemicals suitable for both sulphur and petcoke cargoes

Antiscalant Antifoulant Corrosion Inhibitor 704

Alias: 

Genesys RC - Antiscalent, Antiscalant IBC Hypersperse MDC704, KylinTreat M704 Reverse Osmosis Antiscalant Phosphorous free

Active Matter: 
81-85
Application: 

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.

Packing Size: 
25.00 Kg.Liq
Using Procedure: 

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature  Maximum Dilution %
<30°C 10
30 – 35°C 25
>35°C 50

Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Note: 

Future & Benefit

  • Excellent results as a replacement for softenerfilters
  • Compatible with SoliSep* MPT150 coagulant
  • Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
  • Compatible with all of the leading RO membranes
  •  Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
  • Effective over a wide pH range
  • May be fed neat or diluted
  • Compatible with feedwaters that contain aluminum and iron oxides

Handling : 
 
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Short Description: 
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Reverse Osmosis Antiscalant, Phosphorous free

 

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is a highly effective antiscalant developed to control scale precipitates of Silica, Calcium Carbonate, Calcium Sulfate, Barium Sulfate and Strontium Sulfate, and reduce particulate fouling in the membrane separation systems of reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF).

 

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is phosphorous free. It is formulated by high performance multipolymers.

Highly effective over a wide-range of waters – for calcium-based and sulfate-based scales, notably, barium sulfate.

RO ANTISCALANT

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Effectively control  CaCO3 up to LSI +3.0, CaSO4, SrSO4, BaSO4, CaF2, SiO2, Fe2O3, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 RXSOL  is compatible with all of the leading reverse osmosis membranes, such as Dow, Filmtec, GE, Hydranautics, TORAY, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

Antiscalant Antifoulant Corrosion Inhibitor 704  helps to extend the membrane life and reduce the running cost.

Antiscalant Antifoulant

Sodium Lauryl Ether Sulfate 70 %

Sodium Lauryl Ether Sulphate  RXSOL-12-1880-235  is an anionic surfactant. It is water-soluble. It has excellent foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants. However, due to its anionic character, it should not be used with cationic components like cationic surfactants, cationic dyes, etc.

Alias: 

SLES 70, Sodium Lauryl Ether Sulphate Paste, Texapon N70

Active Matter: 
70-72
Application: 

Sodium Lauryl Ether Sulphate  RXSOL-19-1880-050 is used for a wide range of applications such as:

  • In shampoos, foam baths and shower gels as a basic surfactant and foaming agent.
  • In liquid detergents and dish washing formulations for detergency and foaming.
  • In bathing bars, body wash, liquid soap, etc.
Packing Size: 
220.00 Kg.Liq
Using Procedure: 

 

Chemical Name : Sodium Lauryl Ether Sulfate
INCI Name Sodium Laureth Sulfate
CAS Number 68891-38-3
EC Number : 500-234-8
Chemical Formula R-OCH2CH2OCH2CH2OSO3Na

(R = C 12-14 natural)

Note: 

PACKING :

Sodium Lauryl Ether Sulphate  RXSOL-19-1880-050 is available in 220 kg /160 kg HMHDPE carboys. Total of 80 / 118 carboys i.e. 17.6 MT /17.7 MT can be shipped either palletized or non-palletized in 20 ft. full container load. It can also be shipped in IBC of 1 MT capacity and ISO containers with capacity of 22 to24 MT.

HANDLING AND STORAGE

Store in a clean, dry area, away from sunlight and heat. The recommended storage temperature is 20°C – 35 °C. Keep carboys tightly closed. In the original sealed carboys and kept at recommended storage conditions, the product can be stored for at least 1 year. Spills should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, seek adequate and timely medical attention. Stacking should be maximum 1+1 carboys.

Short Description: 
Excellent Foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants

SLES, Sodium Lauryl ether Sulfate, Sodium lauryl ether sulfate suppliers in Mumbai, Kandla, Gandhidham, Kolkata, Howrah, Vizag, Chennai, Tuticorin. RXSOL brand Sodium lauryl ether sulfate or RXSOL brand SLES is one of the most supplied chemicals by us. We are one of the largest Sodium lauryl ether sulfate suppliers and exporters in Mumbai, Kandla, Gandhidham, Guajarat, Kolkata, Vizag, Chennai etc. sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india
sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl sulphate manufacturer gujarat
sodium lauryl ether sulphate manufacturing process
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium dodecyl sulfate
ammonium lauryl sulfate
sodium lauryl sulfoacetate

sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india

SLES Sodium Lauryl Ether Sulphate exporter and supplier in South Africa, UAE Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Muscat Barka Sohar, Oman, Mumbai, Kandla Gandhidham, Visakhaptnam, Chennai, Kolkata, Canada, Nairobi Kenya, Sudan Yemen

SLES sodium Lauryl Ether Sulphate developed in chemicals field to cover demand of personal care and home care products like Shampoo, Bubble Bath, Shower Gel, Face Wash, Dish Wash, Liquid Detergent and Hand Wash. SLES not only used in detergent and cosmetic industry but also popular in the printing and dyeing industry, petroleum and leather industry as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent.

SLES Paste 70 Percent

Corrosion Inhibitor Pretreatment Filming Agent

RXSOL-81-8154-210  is composed of chelating agent, dispersant, pretreatment filming and surfactant. The chelating agent can chemically adsorb ferric and calcium, forming a hard film on metal surface.

Alias: 

TH-707 Pretreatment Filming Agent, Corrtreat 702, Dustless Blasting Rust Inhibitor, INHIBITOR CORROSION CORR12814A

Active Matter: 
98-100
Application: 

It has the advantages of quick filming, film homogeneization, chemical stable and low corrosion ratio. It can be used as pretreatment filming agent for equipment and pipeline of new system or after heavy repair. RXSOL-81-8154-210 is not affected by copper and ferric ions in water system.

Packing Size: 
210.00 Ltr.
Using Procedure: 

The dosage of 200-500mg/L is preferred. Pretreatment filming time for cold state is 48-72 hours, and for heat state is 24-48 hours.

In oil and gas production systems RXSOL-81-8154-210 Corrosion Inhibitor (Preteratment Filming Agent) is a strong film forming  corrosion inhibitor.

It is a blend of partially neutralized amines and volatile amines in an aqueous based solvent system, It can use by continuous injection into oil production flowlines.

Note: 

Safety Protection:

Acidity, avoid contact with eye and skin, once contacted, flush with water.

Short Description: 
It is composed of chelating agent, dispersant, pretreatment filming and surfactant.

RXSOL BRAND Oilfield Chemical Products Company and supplier in Mussafah Industrial Area Abudhabi, Dubai, Sharjah, Ajman, Fujairah UAE, Muscat Barka Sohar Oman.

RXSOL Brand some valuable Oil field Chemical products are as follows:

 

Corrosion Inhibitors for Drilling : Which protects from corrosion all drilling equipment including tools, drill string pipes, tubulars, and other accessories.

Defoamers : Helps to control foaming during drilling fluids operation.

Foaming Agents : Helps to enhance foam during production of drilling fluid.

Detergents : Plays very important role to minimize the surface tension of the liquid phase and remove drill solids.

Oxygen Scavengers ::: Most important maintenance and oil field treatment chemicals which helps to collect and remove H2S from salt-based (brine) fluid systems.

Viscosifiers are thickening agents that increase the viscosity of water-based and non-aqueous-based drilling fluids, including oil-based and synthetic-based drilling fluids.

Corrosion Inhibitor Preteratment Filming Agent manufacturer, Exporter and supplier in India Oman UAE Middle East. Supplier of Corrosion Inhibitor Preteratment Filming Agent in Muscat, Sohar, Barka, Ghala Oman, Fujairah UAE, Sharjah, Ajman, Abudhabi, Dubai, Mumbai, Gandhidham, Kolkata, Chennai, Canada, Kenya Africa, Yemen, Basra Iraq

Filming forming amine based corrosion inhibitor

Biocide and Biodispersant

It is a highly effective, synergistic biocide and biodispersant, possessing both bactericidal and algaecidal properties, for use in cooling water systems and industrial process waters.

Alias: 

Bellacide 301

Application: 

RXSOL Biocide and Biodispersant is not only effective at low concentrations versus both bacteria and algae, but it is also highly effective at killing biofilm.

microorganisms.RXSOL Biocide and Biodispersant is not only effective at low

concentrations versus both bacteria and algae,

but it is also highly effective at killing biofilm

microorganisms.

Packing Size: 
25.00 Ltr.
Short Description: 
It is a highly effective synergistic biocide and biodispersant possessing both bactericidal and algaecidal properties for use in cooling water systems and industrial process waters.

Calcium Hypochlorite Granules

Alias: 

Altoch GP, Chlorine Granuels 45 Kg

Active Matter: 
70-80%
Application: 

RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms. Since calcium hypochlorite as a solution is a very efficient killer of virtually all bacteria, algae and other objectionable micro-organisms, it is used as a standard for comparison testing of other sanitizing chemicals. While calcium hypochlorite is used primarily to chlorinate swimming pool, spa and hot tub water, and to treat water supplies and sewage, it is also frequently used as a bleaching agent and sanitizer in industrial applications.

Rxsol Calcium Hypochlorite granules can be used for continuous chlorination or applied manually.Swimming Pool, Spa and Hot Tub Operators use calcium hypochlorite as a routine sanitizer to kill and prevent the growth of algae, bacteria, and other microorganisms. It is also widely used as a shock treatment to destroy organic contamination in pool water, thereby improving the water clarity. Strong calcium hypochlorite solutions serve as disinfectants for cleaning pool sides and bottoms, decks, diving boards, ladders, floats, locker and shower room floors and benches, sinks and toilets.

Municipal Water Treatment —

Municipalities use calcium hypochlorite in place of chlorine gas or liquid bleach to purify water. It is also effective for treating wells; sanitizing new water mains; controlling algae, especially sudden growths, in reservoirs, filters and other equipment; treating sewage and controlling odors.

Wastewater Treatment —
Calcium hypochlorite is used to treat wastewater effluents under controlled conditions by textile mills, paper mills, tanneries, food processing plants and more.

Other Applications —

Other uses for alcium hypochlorite include sanitizing food and beverage containers and production equipment in dairies, restaurants, hospitals and farms. Calcium hypochlorite also is used to control algae and slime in commercial and industrial cooling water systems.

Packing Size: 
45.00 Kg.PWD
Using Procedure: 

HS Code 28281090

Drinking Water disinfectant easiest process is  to add  1-pound of calcium hypochlorite in granular form in to 10,000 gallons of drinking water.  And Calcium Hypochlorite is widely available for use as swimming pool chlorine tablets or white powder that is much more stable than chlorine.
 

Variety of disease causing organisms including bacteria, yeast, fungus, spores, and viruses growing in water.  RXSOL brand have easiest method to test such polluted water by simple test method.

Note: 

Typical Properties

Chemical Name : Calcium Hypochlorite
Chemical Formula : Ca(OCl)2
Granular Bulk Density : lb/ft3 64
Chemical Assay of Calcium Hypochlorite
Active Ingredient  Calcium Hypochlorite : 73% nom
Inert Ingredients, Readily soluble salts : 27%
Minimal Available Chlorine : 70%
Solubility in Water Granular calcium hypochlorite dissolves readily at  : 77°F.
Sample Solutions : 1 lb. in 80,000 gallons = 1 ppm AvCl. 2 dry oz. in 1 gallon = 1% solution or 10,000 ppm
pH Solutions
AvCl, ppm : pH
100
200
600
1000
:
:
:
:
9.7
10.00
10.4
10.7
Short Description: 
RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms.

Other valuable water treatment products also available with us :

Calcium Hypochlorite 65 - 70% CHLORINE POWDER, 45 kg / drum

Calcium Hypochlorite 70 % 2G (Pack / 200 tables X 1.7 g )

Calcium hypochlorite 70%  200g tablet

Chlorine tabs Oasis 33mg ( carton /1000 tab)

CITRIC ACID MONOHYDRATE, 25kgs/bag

Citric Acid Anhydrous with 25 kgs /bag

Softener salt treatment SALT TABLET 25/BAG Packing : 25kg / bag                        

Purolite resin C100E, 25KG Bag

Sodium Hexametaphosphate  ( SHMP 68 %) with new date, Packing : 25kg bags

Carbon ,25 kgs/bag

Carbon with diameter 70-90 , 25kgs/ bags

SODIUM HYPOCHLORITE 

CHLORINE LIQUID PACKING  : 20 LITER CONCENTERATE : 10 TO 12 %

FORMALIN LIQUID PACKING : 25 LITER CONCENTRATE: 35 TO 37 %

HYPOCHLORITE ACID CONCENTRATE : 98% PACKING : 25 LITER
Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS) 
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Methanol Packed : 25 liter 20

50 % Hydrogen Peroxide Packed : 25 liter

Hydrochloric acid Packed : 25 liter

Mixed bed PUROLITE with 25 Liter / kgs /bag ,ANION OH ,PUROLITE MB400 

Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS) 
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Calcium Hypochlorite Granules manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Calcium Hypochlorite Granules at a competitive price from us. We have ready stock of Calcium Hypochlorite Granules in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

#CalciumHypochlorite_Granules
#Chlorine_Granules
#ChlorineGranules_supplierMuscatDubai

Chlorine Granuels Powder

BRINE SOLUTION

Packing Size: 
5.00 Ltr.
Short Description: 
Brine Solution RXSOL is a Borate organic Corrosion Inhibitor specialy design for chloride brine close re-circulating system.
stock-clearance.png