Cooling Water Chemical-43

ROCCOR NB Corrosion Inhibitor

COOLING WATER CORROSION & SCALE INHIBITOR

Alias: 

Caretreat 2 Diesel, Coronil 202, Gyrocor RX W.C., DEWT NC, Liquid EWT, Cool water Treat Corrosion Inhibitor, CWT Nclt diesel, Liquid guard 2000, ENGINE JACKET WATER CONDITIONER, Aquafine 103, CWT-NT Chemo, NCT-105 L Norc, Cooling Agent Liquid, Rocor NB Liquid 25 Ltr, Nalco 2000

Active Matter: 
68 - 75
Application: 

Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4001-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.

FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.

( Used as a corrosion inhibitor for all ferrous and non-ferrous metals found in water systems )

Packing Size: 
25.00 Ltr.
Using Procedure: 

Refer to technical datasheet.

GENERAL RECOMMENDATION : ( The dosage chart may be used as a guide to adjust treatment to obtain the optimum level.)

Nitrite (as PPM NO2) 100-200 300-600 700-900 1100-1300   
RXSOL-40-4001-025 / 1000L 8.0  7.3 7-8 5-7   1.5-3.5

NOTE ::: --   If nitrite level becomes 1440-2400 then doses should be ZERO.

The initial dosage for an untreated system is 8 liters of product per 1000 liters of water. Such a dose will bring nitrite levels over 1200 ppm. Maximum nitrite level is considered to be 2400 ppm. Frequent tests should be carried out in order to maintain pH values within the limit (8.3-10.0), while levels of chloride should be maximum 50 ppm.
 

Note: 

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in  water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.

RXSOL-40-4001-025 will react with sludge and in most cases, facilitate sludge gradual removal. On badly fouled systems with oil or scale, a prior degreasing by using DEGREASER HEAVY DUTY or descaling by using DEGREASER HEAVY DUTY, SCALE REMOVER LIQUID or SCALE REMOVER POWDER is highly recommended.

• Excellent corrosion inhibitor for cooling water

• Minimises metal oxide deposits

• Protects ferrous and non-ferrous metals

• Compatible with glycol-based antifreeze

• Reduces cleaning & maintenance costs

• Cost effective, easy to apply and use

Short Description: 
Unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants , dispersant and buffer solution of non carbonate.Usefull for use in high or low temperature closed cooling water syste

The closed cooling system uses the water flowing through a heat exchanger to remove heat from the engines. If Continuous flow of cooling water contains ROCCORRX Nb corrosion inhibitor and antifreeze mixture resulting good protect towards metal surface. 

CWT ROCCORRXRX NB Corrosion Scale Inhibitor Liquid is classified marine chemical corrosion inhibitor for engine cooling water systems. ROCCORRX NB Liq effectively protects ferrous and non-ferrous metals of engine cooling system. RXSOL CWT ROCCORRXRX NB Corrosion Scale Inhibitor Liquid is used in diesel engines, compressors, process cooling systems as ROCCOR nb liquid is the suitable and most popular corrosion inhibitor for closed heating or cooling systems of machinery and engine system.

CWT ROCCORRXRX NB Corrosion Scale Inhibitor Liquid  equivalent product is CWT Diessel NB Guard, Liqui dewt, ROCCORRX NB liquid

CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid msds and technical bulletine available here.
CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid is one of classified corrosion inihibitor for cooling water system. Ferrous and Non ferrous metal parts of cooling water system gets corrosion and changes into pitting formation which results in the form of leakage and many more. But presence of balance level of nitrite and borax which is main compenent of CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid, effectively control corrosion on metal surface, This is the reason why uses of ROCCORRX NB liquid is most common in COOLING WATER SYSTEM on the other hand we can say that CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid is the ideal corrosion inhibitor for closed heating or cooling systems, such as diesel engines, compressors, process cooling systems, etc.

Also refer this link http://rxmarine.com/engine-water-treatment-corrosion-inhibitor

CWT RoccorRX NB Corrosion Scale Inhibitor Liquid manufacturer and supplier in Mumbai, turbhe Pawana Navi Mumbai, Panvel, Taloja, Gandhidham, Kandla, Mundra, Jamnagar, Hazira, Surat, Manglore, Chennai Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Paradip Odisha, Fujairah, Dubai, Ajman, Abudhbai, Muscat Oman Barka Sohar, Canada

ROCCOR Nitrite Borax with proprietory mixture is most popular Corrosion Inhibitor for cooling water jacketed system.

How to Protect internal combustion engines, compressors, chiller system and DG sets from Corrosion?

ROCCOR NB Corrosion Inhibitor is a  unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants, dispersant and buffer solution of non carbonate.

ROCCOR NB is specialized such a way which can be use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Also Usefull to Protects all metals including cast iron, mild steels and copper. Recommended ppm levels are easily controlled by standered RXSOL test kit Nitrite / Chloride.

The stable protective microfilm prevents corrosion caused by electrolytic action and the alkaline nature of this product prevents acid attack.

The stability of the added polymers are very useful for water treatment processes. Such polymers with low molecular weights cannot only inhibit calcium, magnesium, and silica scale in cooling towers and boilers, but also help corrosion control by dispersing iron oxide. 

During Circulation of water mainly controlling of 2 factors required : -

 

SCALE CONTROL in closed water cooling systems - Diesel and gas engines releasing high temperature due to that water present in jacket cooling system  increases its tendency to deposit scale. To avoid scale formation water softener like Zeolite  gradual buildup of scale in cylinders and cylinder heads. Where condensate is available, it is preferred for closed system cooling water makeup. Where condensate is not available, zeolite softening should be applied to the makeup water.

 

CORROSION CONTROL An increase in water temperature causes an increase in corrosion. At high temperature  solubility of oxygen in water decreases due to that Corrosion rates increasing inside the system.  This occurs because the lower solubility of oxygen with increasing temperatures in a freely vented system decreases the corrosion rate faster than the rise in temperature increases it. However, in many closed systems, the dissolved oxygen entering the system in the makeup water cannot be freely vented, resulting in the release of oxygen at points of high heat transfer, which may cause severe corrosion. Untreated systems can suffer serious corrosion damage from oxygen pitting, galvanic action, and crevice attack. Closed cooling systems that are shut down periodically are subjected to water temperatures that may vary from ambient to 180°F (82°C) or higher. During shutdown, oxygen can enter the water until its saturation limit is reached. When the system is returned to high-temperature operation, oxygen solubility drops and the released oxygen attacks metal surfaces. 

 

The three most reliable corrosion inhibitors for closed cooling water systems are chromate, molybdate, and nitrite materials. Generally, the chromate or molybdate types have proven to be superior treatments.

ROCCOR NB Corrosion Inhibitor

What is closed cooling system ?

The full closed cooling system is designed to circulate cooling water through the block and exhaust manifold.  water is circulated through water pump to heat exchanger tank and be pumped through many small tubes where it will exchange heat from the water of the circulating system. Then water exits the heat exchanger to go directly into the risers and then exit the boat. The exhaust manifold and riser will be blocked off, so no water will transfer between them. As for the circulating water in the closed cooling system, cool water will enter the engine through the circulating pump and circulate through the engine. The water will heat up in the engine and the warm water will exit at the water outlet on top of the manifold and head to the manifolds. After circulating through the manifolds, the hot water will head to the heat exchanger to exchange the heat it's carrying with the raw water. After the exchange the cool circulating water exits the heat exchanger and returns to circulating pump to begin another loop. 
 

How to Protect internal combustion engines, compressors, chiller system and DG sets from Corrosion?

 

ROCCOR NB Corrosion Inhibitor is a  unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants, dispersant and buffer solution of non carbonate.

 

ROCCOR NB is specialized such a way which can be use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Also Usefull to Protects all metals including cast iron, mild steels and copper. Recommended ppm levels are easily controlled by standered RXSOL test kit Nitrite / Chloride.

 

 

The stable protective microfilm prevents corrosion caused by electrolytic action and the alkaline nature of this product prevents acid attack.

 

The stability of the added polymers are very useful for water treatment processes. Such polymers with low molecular weights cannot only inhibit calcium, magnesium, and silica scale in cooling towers and boilers, but also help corrosion control by dispersing iron oxide. 

 

FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.

 

 

 

Where Roccor NB can be used?

 

Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4001-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.

 

FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.

 

 

( Used as a corrosion inhibitor for all ferrous and non-ferrous metals found in water systems )

 

 

 

DOSES and Using procedure of ROCCOR NB?

 

 

GENERAL RECOMMENDATION : ( The dosage chart may be used as a guide to adjust treatment to obtain the optimum level.)

 

Nitrite (as PPM NO2) 0 100-200 300-600 700-900 1100-1300   

RXSOL-40-4001-025 / 1000L 8.0 7.3 7-8 5-7  1.5-3.5

NOTE ::: --   If nitrite level becomes 1440-2400 then doses should be ZERO.

 

 

The initial dosage for an untreated system is 8 liters of product per 1000 liters of water. Such a dose will bring nitrite levels over 1200 ppm. Maximum nitrite level is considered to be 2400 ppm. Frequent tests should be carried out in order to maintain pH values within the limit (8.3-10.0), while levels of chloride should be maximum 50 ppm.

 

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in  water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.

 

RXSOL-40-4001-025 will react with sludge and in most cases, facilitate sludge gradual removal. On badly fouled systems with oil or scale, a prior degreasing by using DEGREASER HEAVY DUTY or descaling by using DEGREASER HEAVY DUTY, SCALE REMOVER LIQUID or SCALE REMOVER POWDER is highly recommended.

 

 

• Excellent corrosion inhibitor for cooling water

 

• Minimises metal oxide deposits

 

• Protects ferrous and non-ferrous metals

 

• Compatible with glycol-based antifreeze

 

• Reduces cleaning & maintenance costs

 

• Cost effective, easy to apply and use

ROCCOR NB Corrosion Scale Inhibitor Liquid specialized marine chemical product for Cooling Water treatment. ROCCOR NB Corrosion Scale Inhibitor Liquid supplier in Mumbai, Kandla Mundra, TURBHA MIDC NAVI Mumbai, Hazira SURAT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Kakinada, Fujairah, Ajman, Abudhabi, Sharjah, Dubai, UAE GULF, Ruwi Gala Barka, Muscat Oman, Canada, Nairobi Kenya Sudan, Yemen

Closed Cooling System corrosion inhibitor

ROCCOR NB Corrosion Scale Inhibitor Liquid

COOLING WATER CORROSION & SCALE INHIBITOR

Alias: 

Caretreat 2 Diesel, Coronil 202, Gyrocor RX W.C., DEWT NC, Liquid EWT, Cool water Treat Corrosion Inhibitor, CWT Nclt diesel, Liquid guard 2000, ENGINE JACKET WATER CONDITIONER, Aquafine 103, CWT-NT Chemo, NCT-105 L Norc, Cooling Agent Liquid

Active Matter: 
68 - 75
Application: 

Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4001-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.

FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.

( Used as a corrosion inhibitor for all ferrous and non-ferrous metals found in water systems )

Packing Size: 
25.00 Ltr.
Using Procedure: 

Refer to technical datasheet.

GENERAL RECOMMENDATION : ( The dosage chart may be used as a guide to adjust treatment to obtain the optimum level.)

Nitrite (as PPM NO2) 100-200 300-600 700-900 1100-1300   
RXSOL-40-4001-025 / 1000L 8.0  7.3 7-8 5-7   1.5-3.5

NOTE ::: --   If nitrite level becomes 1440-2400 then doses should be ZERO.

The initial dosage for an untreated system is 8 liters of product per 1000 liters of water. Such a dose will bring nitrite levels over 1200 ppm. Maximum nitrite level is considered to be 2400 ppm. Frequent tests should be carried out in order to maintain pH values within the limit (8.3-10.0), while levels of chloride should be maximum 50 ppm.
 

Note: 

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in  water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.

RXSOL-40-4001-025 will react with sludge and in most cases, facilitate sludge gradual removal. On badly fouled systems with oil or scale, a prior degreasing by using DEGREASER HEAVY DUTY or descaling by using DEGREASER HEAVY DUTY, SCALE REMOVER LIQUID or SCALE REMOVER POWDER is highly recommended.

• Excellent corrosion inhibitor for cooling water

• Minimises metal oxide deposits

• Protects ferrous and non-ferrous metals

• Compatible with glycol-based antifreeze

• Reduces cleaning & maintenance costs

• Cost effective, easy to apply and use

Short Description: 
Unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants , dispersant and buffer solution of non carbonate.Usefull for use in high or low temperature closed cooling water syste
Information: 

Nitrite borax corrosion inhibitor liquid is one of popular cooling water treatment chemical. This product contains nitrite and borate as major component along with new generation corrosion inhibitor which makes new advance Nitrite borax corrosion inihibitor then others. Many experiment proves that  water of closed cooling system required special treatment to prevent pitting corrosion and scale formation. Special Blend of Nitrite and Borate with watersoftening polymer plays excellent role in cooling system.

The closed cooling system uses the water flowing through a heat exchanger to remove heat from the engines. If Continuous flow of cooling water contains ROCCORRX Nb corrosion inhibitor and antifreeze mixture resulting good protect towards metal surface. 

CWT ROCCORRXRX NB Corrosion Scale Inhibitor Liquid is classified marine chemical corrosion inhibitor for engine cooling water systems. ROCCORRX NB Liq effectively protects ferrous and non-ferrous metals of engine cooling system. RXSOL CWT ROCCORRXRX NB Corrosion Scale Inhibitor Liquid is used in diesel engines, compressors, process cooling systems as ROCCOR nb liquid is the suitable and most popular corrosion inhibitor for closed heating or cooling systems of machinery and engine system.

CWT ROCCORRXRX NB Corrosion Scale Inhibitor Liquid  equivalent product is CWT Diessel NB Guard, Liqui dewt, ROCCORRX NB liquid

CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid msds and technical bulletine available here.
CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid is one of classified corrosion inihibitor for cooling water system. Ferrous and Non ferrous metal parts of cooling water system gets corrosion and changes into pitting formation which results in the form of leakage and many more. But presence of balance level of nitrite and borax which is main compenent of CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid, effectively control corrosion on metal surface, This is the reason why uses of ROCCORRX NB liquid is most common in COOLING WATER SYSTEM on the other hand we can say that CWT ROCCORRX NB Corrosion Scale Inhibitor Liquid is the ideal corrosion inhibitor for closed heating or cooling systems, such as diesel engines, compressors, process cooling systems, etc.

Also refer this link http://rxmarine.com/engine-water-treatment-corrosion-inhibitor

CWT RoccorRX NB Corrosion Scale Inhibitor Liquid manufacturer and supplier in Mumbai, turbhe Pawana Navi Mumbai, Panvel, Taloja, Gandhidham, Kandla, Mundra, Jamnagar, Hazira, Surat, Manglore, Chennai Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Paradip Odisha, Fujairah, Dubai, Ajman, Abudhbai, Muscat Oman Barka Sohar, Canada

ROCCOR Nitrite Borax with proprietory mixture is most popular Corrosion Inhibitor for cooling water jacketed system.

How to Protect internal combustion engines, compressors, chiller system and DG sets from Corrosion?

ROCCOR NB Corrosion Inhibitor is a  unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants, dispersant and buffer solution of non carbonate.

ROCCOR NB is specialized such a way which can be use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Also Usefull to Protects all metals including cast iron, mild steels and copper. Recommended ppm levels are easily controlled by standered RXSOL test kit Nitrite / Chloride.

The stable protective microfilm prevents corrosion caused by electrolytic action and the alkaline nature of this product prevents acid attack.

The stability of the added polymers are very useful for water treatment processes. Such polymers with low molecular weights cannot only inhibit calcium, magnesium, and silica scale in cooling towers and boilers, but also help corrosion control by dispersing iron oxide. 

During Circulation of water mainly controlling of 2 factors required : -

 

SCALE CONTROL in closed water cooling systems - Diesel and gas engines releasing high temperature due to that water present in jacket cooling system  increases its tendency to deposit scale. To avoid scale formation water softener like Zeolite  gradual buildup of scale in cylinders and cylinder heads. Where condensate is available, it is preferred for closed system cooling water makeup. Where condensate is not available, zeolite softening should be applied to the makeup water.

 

CORROSION CONTROL An increase in water temperature causes an increase in corrosion. At high temperature  solubility of oxygen in water decreases due to that Corrosion rates increasing inside the system.  This occurs because the lower solubility of oxygen with increasing temperatures in a freely vented system decreases the corrosion rate faster than the rise in temperature increases it. However, in many closed systems, the dissolved oxygen entering the system in the makeup water cannot be freely vented, resulting in the release of oxygen at points of high heat transfer, which may cause severe corrosion. Untreated systems can suffer serious corrosion damage from oxygen pitting, galvanic action, and crevice attack. Closed cooling systems that are shut down periodically are subjected to water temperatures that may vary from ambient to 180°F (82°C) or higher. During shutdown, oxygen can enter the water until its saturation limit is reached. When the system is returned to high-temperature operation, oxygen solubility drops and the released oxygen attacks metal surfaces. 

 

The three most reliable corrosion inhibitors for closed cooling water systems are chromate, molybdate, and nitrite materials. Generally, the chromate or molybdate types have proven to be superior treatments.

ROCCOR NB Corrosion Inhibitor

What is closed cooling system ?

The full closed cooling system is designed to circulate cooling water through the block and exhaust manifold.  water is circulated through water pump to heat exchanger tank and be pumped through many small tubes where it will exchange heat from the water of the circulating system. Then water exits the heat exchanger to go directly into the risers and then exit the boat. The exhaust manifold and riser will be blocked off, so no water will transfer between them. As for the circulating water in the closed cooling system, cool water will enter the engine through the circulating pump and circulate through the engine. The water will heat up in the engine and the warm water will exit at the water outlet on top of the manifold and head to the manifolds. After circulating through the manifolds, the hot water will head to the heat exchanger to exchange the heat it's carrying with the raw water. After the exchange the cool circulating water exits the heat exchanger and returns to circulating pump to begin another loop. 
 

How to Protect internal combustion engines, compressors, chiller system and DG sets from Corrosion?

 

ROCCOR NB Corrosion Inhibitor is a  unique formulation with highly concentrated liquid cooling treatment compound, ferrous & Non ferrous corrosion inhibitors, antiscalants, dispersant and buffer solution of non carbonate.

 

ROCCOR NB is specialized such a way which can be use in high or low temperature closed cooling water systems for the prevention of corrosion and scale formation in internal combustion engines, compressors, chiller system and DG sets. Also Usefull to Protects all metals including cast iron, mild steels and copper. Recommended ppm levels are easily controlled by standered RXSOL test kit Nitrite / Chloride.

 

 

The stable protective microfilm prevents corrosion caused by electrolytic action and the alkaline nature of this product prevents acid attack.

 

The stability of the added polymers are very useful for water treatment processes. Such polymers with low molecular weights cannot only inhibit calcium, magnesium, and silica scale in cooling towers and boilers, but also help corrosion control by dispersing iron oxide. 

 

FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.

 

 

 

Where Roccor NB can be used?

 

Prolongs the life of equipment by keeping it scale and corrosion free. Since RXSOL-40-4001-025 is alkaline, it will suppress acid corrosion, which would otherwise result in sever pittings. It improves cooling efficiency by maintaining clean heat transfer surfaces , from Radiators, DG - sets, Closed Cooling and chiller System.

 

FIELDS ::: --- Suitable for use in closed water cooling systems, ice melting systems and transformer cooling systems. The product may be used in all kinds of diesel & petrol engines, compressor or heating cooling water circuits.

 

 

( Used as a corrosion inhibitor for all ferrous and non-ferrous metals found in water systems )

 

 

 

DOSES and Using procedure of ROCCOR NB?

 

 

GENERAL RECOMMENDATION : ( The dosage chart may be used as a guide to adjust treatment to obtain the optimum level.)

 

Nitrite (as PPM NO2) 0 100-200 300-600 700-900 1100-1300   

RXSOL-40-4001-025 / 1000L 8.0 7.3 7-8 5-7  1.5-3.5

NOTE ::: --   If nitrite level becomes 1440-2400 then doses should be ZERO.

 

 

The initial dosage for an untreated system is 8 liters of product per 1000 liters of water. Such a dose will bring nitrite levels over 1200 ppm. Maximum nitrite level is considered to be 2400 ppm. Frequent tests should be carried out in order to maintain pH values within the limit (8.3-10.0), while levels of chloride should be maximum 50 ppm.

 

Initial dosage for an untreated system is 9 litres of RXSOL-40-4001-025 / 1000 litres of untreated distilled water. This will bring the treatment up to the minimum level of 1000 ppm nitrite. For best result and prolonged engine life add RXSOL-40-4001-025 every 500 -6500 km. or 250 to 300 hours of running time or every 2 month interval. Specially designed for use in  water systems of internal combustion equipment. pH should be maintained between 8.3 and 10 by the treatment.

 

RXSOL-40-4001-025 will react with sludge and in most cases, facilitate sludge gradual removal. On badly fouled systems with oil or scale, a prior degreasing by using DEGREASER HEAVY DUTY or descaling by using DEGREASER HEAVY DUTY, SCALE REMOVER LIQUID or SCALE REMOVER POWDER is highly recommended.

 

 

• Excellent corrosion inhibitor for cooling water

 

• Minimises metal oxide deposits

 

• Protects ferrous and non-ferrous metals

 

• Compatible with glycol-based antifreeze

 

• Reduces cleaning & maintenance costs

 

• Cost effective, easy to apply and use

ROCCOR NB Corrosion Scale Inhibitor Liquid specialized marine chemical product for Cooling Water treatment. ROCCOR NB Corrosion Scale Inhibitor Liquid supplier in Mumbai, Kandla Mundra, TURBHA MIDC NAVI Mumbai, Hazira SURAT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Kakinada, Fujairah, Ajman, Abudhabi, Sharjah, Dubai, UAE GULF, Ruwi Gala Barka, Muscat Oman, Canada, Nairobi Kenya Sudan, Yemen

Closed Cooling System corrosion inhibitor

Cool Water Treat

Alias: 

C.W.T. Inhibitor 9-111, COOL WATER TREAT NCL, Coolwater Treat, Cool water treat, Cool Treat, Corrosion Inhibitor for Cooling Water, CoolTreat 25 Ltr

Active Matter: 
45-50
Application: 

Cool Water Treat  is a highly effective corrosion inhibitor for all common metals in cooling water systems. Testing has shown no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these systems. Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool Water Treat  applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces. For new builds, RXSOL  Ships Service recommends cleaning of the water system before commencing service. The system will always contain small amounts of oil and iron oxides, and this can be removed in one operation. If the system is corroded or is more heavily contaminated, degreasing scale is recommended. For systems previously treated with other products, RXSOL  Ships Service recommend to drain and flush the system before refilling with distilled water and Cool Water Treat . The system should be clean and free from scale and corrosion products when starting the treatment. The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water treat can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Packing Size: 
25.00 Ltr.
Using Procedure: 

Cool Water Treat should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.

Dosing and Control

Initial dosage for an untreated system is 60 litres of Cool Water Treat Cool water Treat Corrosion Inhibitor / ton of untreated distilled water (6%). This will provide sufficient protection of the system for a period of two to five years under normal conditions. 6% Cool water Treat Corrosion Inhibitor should also be dosed in all make up water added to the system to compensate for lost coolant. The engine manufacturer's recommendations for water quality should always be complied with. Chloride levels should always be as low as possible. Most engine manufacturers recommend a maximum of 50 ppm chlorides. For this reason, RXSOL Service recommends the use of distilled water as make-up.

Note: 
  • Liquid product, easy to use
  • Environmentally friendly, fully organic product, low toxicity
  • Effective against cavitation and erosion. Superior heat transfer properties
  • Compatible with hoses, gaskets and seals
  • Compatible with glycols for frost protection
  • Stable product-non depleting
  • The product can be used for corrosion inhibition in many types of closed re-circulation system cooling water systems
  • Approved by major engine manufacturers
Short Description: 
Cool water Treat Corrosion Inhibitor can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Cool Water Treat is specialized corrosion inhibitor for Cooling Water system.

#CorroSionInhibitor_CoolingSystem
#CoolingWaterTreatmentChemicals
#CWTinhbitor_ManufacturerSupplierIndiaUAEoman

Cool Water Treat corrosion inhibitor for cooling water system manufacturer and supplier in Mumbai, Navi Mumbai, Gandhidham, Hazira Surat, Chennai Ennore, Vizag Visakhapatnam, Kolkata Haldia, Buzbuz, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Muscat, Oman, Canada, Nairobi Kenya, Sudan, Yemen

Cooling Water Corrosion Inhibitor

Corrosion Inhibitor 1850RX

Packing Size: 
250.00 Kg
Short Description: 
A substance that reduces the corrosion rate of a metal surface exposed to the corrosive environment by its chemical activity

Hydrogen Peroxide 6% Solution

Hydrogen peroxide (H2O2) is the only germicidal agent composed only of water and oxygen. Like ozone, it kills disease organisms by oxidation! For this reason, Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.

Alias: 

Hydrogen Peroxide, Mild Disinfectant and cleaning agent

Active Matter: 
6%
Application: 

Application : Adults the elderly and children : Apply the solution directly with a PAD of cotton wool required.

Packing Size: 
500.00 Bottle
Using Procedure: 

Active Ingredient : Hydrogen Peroxide 6%

Note: 

1. Cuts and infections

Soak any infections or cuts in 3% for five to ten minutes several times a day. Even gangrene that would not heal with any medicine has been healed by soaking in Hydrogen peroxide. Put half a bottle of hydrogen peroxide in your bath to help rid boils, fungus or other skin infections.

2. Rejuvenating Detoxifying Bath

Use about 2 quarts 3% Hydrogen peroxide to a tub of warm water. Soak at least 1/2 hour, adding hot water as needed to maintain a comfortable water temperature.

3. Foot Fungus

To cure a foot fungus, simply spray a 50/50 mixture of Hydrogen peroxide and water on them (especially the toes) every night and let dry.

4. Bird Mites Infections

Patients infected by tiny mites report that hydrogen peroxide effectively kills the mites on their skins. They spray it on their skin a couple of times (with a few minutes in between the applications) with amazing results.

5. Sinus Infections

A tablespoon of 3% Hydrogen peroxide added to 1 cup of non-chlorinated water can be used as a nasal spray. Depending on the degree of sinus involvement, one will have to adjust the amount of peroxide used.

6. Wound Care

3% H2O2 is used medically for cleaning wounds, removing dead tissue, and as an oral debriding agent. Peroxide stops slow (small vessel) wound bleeding/oozing, as well.

Some sources recommend soaking wounds for five to ten minutes several times a day. However, washing and rinsing action is sufficient. You shouldn’t leave the solution on open tissue for extended periods of time as, like many oxidative antiseptics, Hydrogen peroxide causes mild damage to tissue in open wounds. Therefore it is important to use with caution.

Personal Care

7. Mouthwash

Many people don’t realize that hydrogen peroxide makes a very effective and inexpensive mouthwash. Take one capful (the little white cap that comes with the bottle) and hold in your mouth for 10 minutes daily, then spit it out. You will not have canker sores and your teeth will be whiter. Use 3% H2O2 – add a dash of liquid chlorophyll for flavoring if desired.

8. Toothpaste

Use baking soda and add enough 3% H202 to make a paste.

9. Toothbrush

Or, just dip your brush in 3% H202 and brush. Soak your toothbrush in Hydrogen peroxide to keep them free of germs.

10. Tooth Ache

Hydrogen peroxide is not a pain killer; however, as an anti-viral, antibacterial and anti-fungal agent, it is effective at treating the pathogen that is causing the infection. The following is from my own personal experience: My dentist wanted to give me a root canal some time ago as one tooth was inflamed and, in her opinion, would die. I felt some discomfort but told her that I would give it chance to heal. I rinsed with hydrogen peroxide (several times a day) as well ascoconut oil (once a day). The discomfort went away and I have had no further problems with the tooth.

If you have a terrible toothache and cannot get to a dentist right away, put a capful of 3% Hydrogen peroxide into your mouth and hold it for 10 minutes several times a day. The pain will lessen greatly.

11. Tooth Whitening

Having used 3% Hydrogen peroxide as a mouth wash for sometime ago, I am thrilled to note that my teeth have been beautifully and effortlessly whitened. I used to pay so much for professional whitening, those silly strips and uncomfortable trays. Live and learn.

12. Douche

Add 2 capfuls of 3% Hydrogen peroxide in warm distilled water once to twice a week to remove even chronic yeast infections.

13. Colonic or Enema

For a colonic, add 1 cup (8 ozs.) 3% H202 to 5 gallons warm water. (Do not exceed this amount) For an enema, add 1 tablespoon of 3% H202 to a quart of warm distilled water.

14. Hair Lightening

Peroxide is a bleaching agent and is used for lightened hair. Dilute 3% Hydrogen peroxide with water (50 / 50) and spray the solution on your wet hair after a shower and comb it through. You will not have the peroxide burnt blonde hair like the hair dye packages, but more natural highlights if your hair is a light brown, faddish, or dirty blonde. It also lightens gradually so it’s not a drastic change.

15. Contact Lenses

Hydrogen peroxide is used as a disinfectant in CIBA Vision’s Clear Care no rub contact lens cleaning solution, due to its ability to break down the proteins that build up on the lense from the eye’s immune response, resulting in increased comfort for those with sensitive eyes.

Sanitizing / Disinfectant / Cleaning

16. In the Dishwasher

To disinfect your dishwasher, add 2 oz. of 3% Hydrogen peroxide to your regular washing formula.

17. Kitchen/Household surfaces

Clean your counters and table tops with hydrogen peroxide to kill germs and leave a fresh smell. Simply put a little on your dishrag when you wipe, or spray it on the counters.

Fill a spray bottle with a 50/50 mixture of 3% Hydrogen peroxide and water and keep it in every bathroom to disinfect without harming your septic system like bleach or most other disinfectants will. After rinsing off your wooden cutting board, pour or spray hydrogen peroxide (and then vinegar) on it to kill salmonella and other bacteria.

Keep a spray bottle of 3% (straight) to disinfect the interior of the refrigerator and kids’ school lunch boxes. You can also use hydrogen peroxide to clean glass and mirrors with no smearing. Use it in the bathroom to sanitize the counters, toilets, floors, etc.

Directions: It is best to use two spray bottles rather than mixing the solutions together. Put straight vinegar in one and straight Hydrogen peroxide in the other spray bottle. When you want to sanitize a surface (cutting board, counters, sink, cages, toys, toilets, floors, etc.) spray one mixture on the surface, then the other. When they mix, for a brief time the chemical action of the two make a very powerful sanitizer. You can rinse off the surface afterwards. This applies for kitchen surfaces as well as vegetable and food decontamination.

18. Humidifiers/Steamers

To clear the air, use 1 pint 3% hydrogen peroxide to 1 gallon of water in a humidifier or steamer.

19. Washing/Laundry

You can also add a cup of hydrogen peroxide instead of bleach to a load of whites in your laundry to whiten them. If there is blood on clothing, pour directly on the soiled spot. Let it sit for a minute, then rub it and rinse with cold water. Repeat if necessary.

Peroxide is a perfect alternate solution to keep those clothes white. Also, when chlorinating clothes, they tend to wear out faster – peroxide won’t do that.

20. Laundry / Stain Removing

3% Hydrogen peroxide is an effective stain remove if it is used fairly soon after a spill – although blood stains as old as 2 days have been successfully lifted with Hydrogen Peroxide. If a little peroxide is poured onto the stain it will bubble up in the area of the blood, due to a reaction with catalase. After a few minutes the excess liquid can be wiped up with a cloth or paper towel and the stain will be gone.

3% H2O2 must be applied to clothing before blood stains can be accidentally “set” with heated water. Cold water and soap are then used to remove the peroxide treated blood.

Please note: Hydrogen peroxide will bleach or discolor many fabrics.

Food Preparation

21. Food preparation/decontamination

Combination of vinegar and hydrogen peroxide make a cheap, effective and non-toxic disinfectant agent and is said to be more effective at killing pathogens than bleach. As it is non-toxic, you can use it to cleanse cooking and food preparation areas (as well as fruits and vegetables – see #24). In tests run at Virginia Polytechnic Institute and State University, pairing Vinegar and Hydrogen Peroxide mists, kills virtually all Salmonella, Shigella, or E. coli bacteria on heavily contaminated food and surfaces.

22. Vegetable Soak

Use as a vegetable wash or soak to kill bacteria and neutralize chemicals. Add 1/4 cup 3% H2O2 to a full sink of cold water. Soak light skinned (light lettuce) 20 minutes, thicker skinned (like cucumbers) 30 minutes. Drain, dry and refrigerate. Prolongs freshness.

If time is a problem, spray vegetables (and fruits) with a solution of 3%. Let stand for a few minutes, rinse and dry.

23. Meat Sanitizing

You can also use it to rinse off your meat before cooking.

24. Leftover tossed salad

To help keep leftover salads, spray with a solution of 1/2 cup water and 1 Tbsp. 5%. Drain, cover and refrigerate.

25. Marinade

Place meat, fish or poultry in a casserole (avoid using aluminium pans). Cover with a dilute solution of equal parts of water and 3% H202. Place loosely covered in refrigerator for 1/2 hour. Rinse and cook.

26. Sprouting Seeds

Add 1 ounce 3% Hydrogen peroxide to 1 pint of water and soak the seeds overnight. Add the same amount of hydrogen peroxide each time you rinse the seeds.

Grades of Hydrogen Peroxide

A) 3.5% Pharmaceutical Grade: This is the grade sold at your local drugstore or supermarket. This product is not recommended for internal use. It contains an assortment of stabilizers which shouldn’t be ingested. Various stabilizers include: acetanilide, phenol, sodium stanate and tertrasodium phosphate.

B) 6% Beautician Grade: This is used in beauty shops to color hair and is not recommended for internal use.

C) 30% Reagent Grade: This is used for various scientific experimentation and also contains stabilizers. It is also not for internal use.

D) 30% to 32% Electronic Grade: This is used to clean electronic parts and not for internal use.

E) 35% Technical Grade: This is a more concentrated product than the Reagent Grade and differs slightly in that phosphorus is added to help neutralize any chlorine from the water used to dilute it.

F) 35% Food Grade: This is used in the production of foods like cheese, eggs, and whey-containing products. It is also sprayed on the foil lining of aseptic packages containing fruit juices and milk products. THIS IS THE ONLY GRADE RECOMMENDED FOR INTERNAL USE.

G) 90%: This is used as an oxygen source for rocket fuel.

Short Description: 
Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.

Hydrogen Peroxide 6% Solution supplier in Mumbai, Kandla, Visakhapatnam, Chennai, Kolkata, Fujairah, Dubai, Sharjah, Abu Dhabi.

Mild Disinfectan and cleaning agent

Scale Remover 1507

Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage.

-   Non-combustible solid

Alias: 

INDION 1507 Colour Indicator Scale Remover Powder

Active Matter: 
98-100
Application: 

APPLICATION : Boilers, calorifiers, heat exchanges, diesel engine cooling system, condensers, evaporators & other type of equipment where rust & scale form. 

Appearance Powder ( with indicator )  
Density         1.2g/cm3
pH                 (10 wt %):1.1
Compatibility
Metal    Suitable aluminium, zinc, tin and their alloys. Stainless steel, Carbon Steel, Cast Iron, Titanium, Copper , Copper alloys, PVC, Plastic , Rubber  Rubber No known effect
Rubber No known effect
Packing Size: 
25.00 Ltr.
Using Procedure: 

Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection

This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using SA-1008, sense all metal surfaces with 0.5 percent of RXSOL-54-1008-025 at least 2-4 house , up to neutrial of PH valve.
 

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-54-1008-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025  in sea water. After use of RXSOL-54-1008-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descalex. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descalex a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.

Note: 

HS CODE 34021300

Characteristic:
-Powder product-safe and easy handling and storage.   
-Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors
-protect metals. Requires no heating unless its activity is required to increase fast.Contains anti-foam agent . 
-Colour indicator shows solution strength.
-Removes scale from boilers.                                                                                                 
-Removes scale from Diesel Engine cooling systems.                                                                                   
-Removes scale and rust from Condensers, Evaporators,Heat Exchangers etc.

OTHER VALUABLE PRODUCT :::

Descaling Liquid ::: Part No - RXSOL-11-1008-020 - Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits. Click Link - www.rxmarine.com/descaling-liquid-20-ltr

 

Safe Acid Descalex powder ::: Part No - RXSOL-54-1008-025 - superior , heavy duty, POWDER acid containing accelerators, corrosion inhibitors & wetting agents . Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Click Link - www.rxmarine.com/safe-acid-pwd-descalex-powder

SCALE GUN RX ::: Part No - RXSOL-11-1097-025 -  Descaler for Washing Machine. Click Link - www.rxmarine.com/SCALEGUN

 

Lime Scale Remover ::: Part No - RXSOL-11-1052-025 -  lime eater dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. Click Link - rxmarine.com/lime-remover

Descalex Powder ::: Part No - RXSOL-15-1009-025 - Descalex is a dry acid cleaner formulated to remove rust and scale deposits. Click Link -  rxmarine.com/descalex-powder

Scale Remover Hard water ::: Part No - RXSOL-11-1102-025 - This is powerfull concentrated and newly developed cleaner , which contain amphoteric penetrants for dissolving hard water scale. Click Link -  www.rxmarine.com/SCALEREMOVERHardwater

Scale Mineral Cleaner ::: Part No - RXSOL-15-3011-025 - Safe Acid Mineral Cleaner Very effective products to remove MINERAL SCALE deposits from SURFACES Click Link - www.rxmarine.com/mineral-cleaner

 

RXSOL Zyme Descaler 25 Ltr ::: Part No - RXSOL-11-1053-025 - The environmentally friendly and efficient treatment for urine scale build-up in vacuum pipes.This Product prevents scale and keeps sewage flowing freely. Routine use of Product puts an end to scale altogether. Click Link -  www.rxmarine.com/Zyme-Descaler

 

Hydrocarbon Scale Deposit Remover ::: Part No - RXSOL-11-1672-025 -  Solid Hydrocarbon deposition on heat exchanger tube is bigest problem in industrial line. RXSOL-11-1672-025 helps removal of such deposition in an efficient and environmentally friendly manner. Its unique formulation  dissolves hydrocarbon deposits and removed from the heat exchanger tube bundle quickly. . Click Link - http://www.rxmarine.com/Hydrocarbon-Scale-Deposit-Remover

Scale Inhibitor ::: Part No - RXSOL-16-1056-025 - Treatment is used to reduce the concentration of scale forming compounds that can accumulate in production wells, water and disposal wells, flowlines and surface equipment. Click Link -  www.rxmarine.com/water-Scale-Inhibitor

 

Descalex Polymer ( Heat Exchanger) ::: Part No - RXSOL-40-1048-025 -  safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment..  Click Link -  www.rxmarine.com/safe-acid-descalex-liquid-20-ltr

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Short Description: 
Scale dissolver. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage.

The scale remover contains colour pH indicator with scale dissolving Dry Acid powder which is effectively  dissolves Scale and presence of  corrosion inhibitor protect metal steel parts, cast iron and copper alloys during descaling process And  wetting agent component of scale remover enhance cleaning action which is resulting quick descaling cleaning operation.

Scale remover manufacturer and supplier in Karwar, Visakhapatnam, chennai, Ennore, Kolkata, Haldia, Mumbai, Kandla, Surat, Fujairah, Sharjah, Dubai, Abudhabi, UAE Muscat Oman

1507 Colour Indicator Scale Remover Powder is very effective scale dissolver.

Colour Indicator Scale Remover Powder

GAS TURBINE Cleaner GTC 1000

RXSOL GTC 1000 GAS TURBINE CLEANER is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine -and also inhibits corrosion.

Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.

Alias: 

Clean Blade GTC 1000, Compressor Washing Chemicals GAS TURBINE CLEANER

Active Matter: 
98 - 99%
Application: 

Gas Turbine Compressor Cleaning.

Packing Size: 
220.00 Kg.Liq
Using Procedure: 

By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL GTC 1000 GAS TURBINE CLEANER has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.

The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.

Note: 

Appearance
Clear pale straw coloured liquid with a mild pleasant odour.

Solubility
Completely soluble in water. No agitation required.

Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.

Short Description: 
RXSOL GTC 1000 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors.

RXSOL GTC 1000 GAS TURBINE CLEANER Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen

Liquid Detergent for Gas Turbine Compressor Cleaning for GE Aircraft

Potassium Diethyldithiocarbamate Cooling Water Treatment

Very effective controler of BACTERIA  in water system.

It is a enviromentally safe and versatile anti microbial and a powerful anti oxidant, When it dissolved in water, it disintegrates to water, oxygen and carbon dioxide. All these degradation products are non toxic. It is a very powerful oxidant, whose oxidation potential outranges that of chlorine and chlorine oxides.

Alias: 

Potassium Diethyldithiocarbamate

Application: 

Potassium Diethyldithiocarbamate is used in various applications. Here is a list of areas in which Potassium Diethyldithiocarbamate can be used:

  • Marine / Industrial circulating cooling water for both open and closed loops ( including food contact )
  • Milk & Dairy products processing and packaging plants.
  • Wineries, vineyards and breweris plant
  • Meat, Seafood, poultary and vegetable processing plants
  • Cleaning, sanitising and disinfections of UF & RO membranes
  • Waste water treatment ( odour control agent, disinfectant and cleaner )
  • Hospital & Health care facilities, veterinary clinics
  • Hatcheries and egg processing unit.
  • Dish and table ware sanitizer
Packing Size: 
25.00 Ltr.
Note: 
WATER TREATMENT CHEMICAL Manufacturer Supplier India UAE OMAN
Algaecide
Aluminium Sulphate
Calcium Hypochlorite
Sodium Bi Sulphate (Pool Acid)
Soda Ash
Sodium Di Iso Cyanurate
Sodium Meta Bi Sulphite
Ticca Tablets
 
 
 
 
 
 

 

Short Description: 
Very effective controler of BACTERIA in water system.

Potassium Diethyldithiocarbamate manufacturer supplier exporter in Mumbai, Kandla, Mundra, Kolkata, Howrah, Vizag, Chennai, India. Potassium Diethyldithiocarbamate Biocide bacteria killer manufacturer in UAE Fujairah, Oman Muscat and Canada. Potassium Diethyldithiocarbamate Bacteria remover from Cooling water systems. Bacteria killing chemical manufacturer in India, UAE, Oman. Potassium Diethyldithiocarbamate Biocide for marine ship maintenance supplier.

Potassium Diethyldithiocarbamate Biocide manufacturer and supplier in India, UAE and Oman.

Ready stock of Potassium Diethyldithiocarbamate Biocide bacteria killer in Mumbai, Kandla, Mundra, Chennai, Vizag, Kolkata, UAE- Fujairah, Oman- Muscat, Kenya Africa, Canada

Potassium Diethyldithiocarbamate

Corrosion Inhibitor Multifunctional Closed Chilled Systems

Corrosion Inhibitor Additives for Water system
This is a Highly effective INHIBITOR for closed loop , line chilled water with unique dual control of corrosion and scale from system.

 

This closed water treatment chemicals are  designed to treat hot and chilled water systems. The product contains a combination of nitrite, borate, and silicate formulated to minimize corrosion and deposition. The product comes in a clear and pink appearance form.
 

Alias: 

Accepta 2807, Korodex 8574, TRASAR TRAC 102, CORRSHIELD NT 4293, Corrosion Inhibitor Multifunctional closed/chilled systems 30 Kg Ltr

Application: 

RXSOL-40-4011-025 is a superior multifunctional, nitrite-based chemical treatment used for the control of corrosion in closed cooling systems and chilled water systems. RXSOL-40-4011-025 is a liquid product containing a combination of ferrous and non-ferrous corrosion inhibitors, a non-carbonate buffer, scale inhibitors, dispersants and a leak detection dye.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Compatible with Feeders, piping and valves should be made of steel, polyethylene, or PVC. This Treatment can be controlled by a nitrite test.

The recommended dosage of RXSOL-40-4011-025 is 15.6-23.4 l/m3 of system capacity or 60.6-87 RXSOL-40-4011-025 of system capacity in all systems. Clean up the system if the system becomes contaminated with iron. Maintain 600-750 ppm nitrite as NO2. RXSOL-40-4011-025  is intended for industrial use only. It should not be fed to potable water systems

Note: 

◦Very effective to Controls corrosion on brass, aluminum, steel, and stainless steel
◦Extends equipment life & Improves overall equipment efficiency

Short Description: 
Premium Quality Alkaline Corrosion Inhibitor blend for Metal protection inside the CLOSED circulating system

Why RXSOL CORROSION INHIBITOR for cooling Water System Required ?

Corrosion damage metal surface by chemical or electrochemical reaction which results failure of equipment with the resultant cost of replacement and plant downtime.

Due to Deposition of  CORROSION  result fouling in of heat exchanger fouling caused by the accumulation of corrosion products., Heat Transfer efficiency decreases. Which resulting loss of plant efficiency due to loss of heat transfer.
 

HOW to CONTROL CORROSION in COOLING SYSTEM?

 

Primary Step : Use calcium carbonate bleanded RXSOL-40-4090-025 to increase alkalinity in the water which results to form a protective film on METAL SURFACE.
Second Step  : Remove the corrosive oxygen from the water, either by mechanical or chemical deaeration Oxygen Scavenger RXSOL-50-5023-025. Excess of OXYGENT is mother of CORROSION.

Third Step       : Add corrosion inhibitors RXSOL-40-4011-025

Which material is used to protect COPPER METAL in Water System?

Copper Corrosion Inhibitors. The most effective corrosion inhibitors for copper and its alloys are the aromatic triazoles, such as benzotriazole (BZT) and tolyltriazole (TTA).

#CorrosionInhibitor_MultifunctionalClosedChilledSystems
#CorrosionInhibitor_ClosedChilledSystems
#CorrosionInhibitor_ClosedCoolingSystems
#BestCorrosionInhibitor_manufacturerSUPPLIERinDUBAIuae
#Corrosion-Inhibitor-Multifunctional-Closed-Chilled -ystems

Corrosion Inhibitor Multifunctional Closed Chilled Systems Manufacturer and supplier in India UAE Oman.

Advantages: -

  • 1. Prolong the life of equipment by keeping scale and corrosion free. Since RXSOL-40-4011-256 is alkaline and so will suppress acid corrosion, which would otherwise result in corrosion damage such as pitting. However, the alkalinity control is such that even if the product is accidentally overdosed, the pH of the water will remain within limits. The metals which would be affected by extremes of alkalinity or acidity are protected.
  • 2. Improves generating cooling efficiency by maintaining a clean heat transfer
  • 3. Corrosion protection by using superior corrosion inhibitor.
  • 4. Reduced maintenance and down time
  • 5. Compatible with Coolants / Antifreeze solution / Glycol .
  • 6. Friendly with Metals (Like steel, Copper, Aluminum, all alloys) & Non-metal (Rubber, Hoses, Gasket etc.)

Corrosion Inhibitor Closed Cooling systems manufacturer and supplier in Mumbai, Kandla, Surat Gujarat, Chennai, Visakhapatnam, Kolkata, Haldia, Fujairah, Sharjah, Ajman, Mussafah Industrial Area Abu Dhabi, Abudhabi, Dubai, UAE Gulf, Ruwi Barka Muscat Oman, Nairobi Kenya, Sudan Yemen Canada

Corrosion Inhibitor Multifunctional Closed Chilled Systems RXSOL-40-4011-025  manufacturer and supplier in Mussafah Industrial Area Abu Dhabi, Dubai, Sharjah, Ajman, Fujairah, United Arab Emirates. Corrosion Shield Protection chemicals for Cooling System available in UAE and supplier near by me in Mussafah Industrial Area Abu Dhabi, Dubai, Sharjah, Ajman, Fujairah, United Arab Emirates.
 

RXSOL CHEMICAL is one of the leading Scale and Corrosion Inhibitor Chemicals Manufacturers & Suppliers in UAE for Industrial, Oil Field and Marine Shipping Industries

 

In Cooling system,  Specialized Corrosion Inhibiotr gives atmosphere for Corrosion Protection, RXSOL is most popular leading manufacturer of environmentally-friendly corrosion inhibitors in  Middle East.

 

HOW CORROSION INHIBITOR WORKS AGAINST CORROSION in COOLING system?
 

Corrosion inhibitors are chemicals that can significantly reduce the corrosion of metals when Dose / applied as per guideline into the water and fluids.

Corrosion Inhibitor Multifunctional closed/chilled systems 25 Ltr

Biocide 7000

Biocide 7000 is a broad spectrum liquid microbiocide for use in a variety of water treatment applications, including open and closed recirculating cooling systems, paper mills, air washers and non-potable water storage. Biocide 7000 causes immediate inhibition of growth on coming in contact with micro-organisms.

Alias: 

IAQ 7000

Active Matter: 
98 - 99%
Application: 

Biocide 7000 readily penetrates the surface of adhering biofilms and its biocidal action prevents micro-organisms from forming the sticky materials which are necessary to form biofilms in the first place. Thus Biocide 7000 is extremely effective against biofilm formation and at biofilm removal.

Biocide 7000 is stable over the wide range of conditions found in industrial water applications. It is stable in the presence of 1ppm free chlorine and its stability compared with many other biocides at different levels of pH, temperature and total water hardness is excellent. Biocide 7000  has been shown to be effective against Legionella species even at low concentration and high pH levels, although it is not recommended for use as a disinfectant. Further details are available
upon request.

Biocide 7000 is compatible with our entire range of corrosion and scale inhibitors and its stability and effectiveness in alkaline conditions makes it suitable for use as part of our 'High pH Solution for Open Evaporative Cooling Systems.

Packing Size: 
25.00 Ltr.
Note: 

ADVANTAGES

  • Broad spectrum activity against algae, fungi and bacteria, including
  • Legionella Pneumophila and sulphate reducing bacteria.
  • Very effective against biofilms.
  • Effective over a wide range of pH, temperature and water hardness.
  • Readily biodegradable when diluted.
  • Low toxicity.
  • Compatible with low levels of free chlorine or bromine as well acorrosion and scale inhibitors.
  • Can be used to disinfect certain ion exchange resins.
  • Does not contribute significantly to the AOX (Absorbable Organic
  • Halogens) level in a typical industrial effluent.
  • Does not interfere with the functioning of wastewater treatment plants, and is degraded readily by them.
  • Effective at low concentration - cost effective.
  • Not surface active - non-foaming.

HANDLING :

This product in a strong irritant to skin and eyes, both as a concentrate and as a solution. Eye and skin contact should be avoided by wearing PVC/ rubber gloves and goggles as well as protective overalls.

STORAGE :

Store in cool, well ventilated area. Keep container tightly closed. Do not store with Alkalies such as Category B and C products or oxidising agents such as Category I and J products.

Short Description: 
Titanium dioxide Based Biocide

Biocide 7000 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Biocide 7000 at a competitive price from us. We have ready stock of Biocide 7000 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

RXSOL Raw Materials Chemicals Division

RXSOL  is a professional company in sourcing and supplying high quality raw Materials for Water Treatment Chemicals manufacturing as follows:

1- Biocides manufacturer and supplier:

CMIT/MIT (Isothiazolinone 14%), BKC, Glutaraldehyde, Bronopol, OUAT (Quaternary ammonium chloride), PolyQuat, DBNPA, THPS 75%, Ammonium bisulphite, Bromine Tablets, copper sulphate pentahydrate.

2- Phosphonates manufacturer and supplier:

PBTC, HEDP, ATMP, DTPMPA.

3- Polymer scale inhibitors manufacturer and supplier:

Poly Acrylic Acid (PAA) copolymers and Terpolymers, AA/AMPS copolymers.

4- Corrosion inhibitors and oxygen scavengers manufacturer and supplier : 

Cyclohexylamine, Morpholine, DEHA, Benzotriazole, Tolytriazole, Phenolphthalein white, Sodium Molybdate, Sodium Nitrite, ZINC Sulphate heptahydrate, Zinc chloride and many others.

Titanium Dioxide Based Biocide

stock-clearance.png