Passivation-38

Slip Barrier Coats HOLD BLOCK

Alias:

Slip Barrier Coats HOLD Block Resist, RBM HOLD BLOCK, GREEN BARRIER, HOLD SURFACE PROTECTOR, PRELOAD 300, HOLD BARRIER XR, Paint Protector

Active Matter:

72-81

Application:

Slip Barrier Polymer Coats HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Packing Size:

25.00 Ltr.

Using Procedure:

for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Barrier Polymer Coats HOLD BLOCK RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Related Products:

Bilge Coat RXSOL

Hold Wash Concentrate RX

ALKAATUFF DETERGENT

Cement Remover RX Hold

Pet Coke Remover

ALKAATUFF ALKALINE

COAL REMOVER rx hold 25 Ltr

Holdbright Plus

RX Tuff High Foam conc.

BioSol Cleaner

Article News:

Ship Hold Cleaning Alkaline Detergent price for Mumbai, Kolkata, Chennai, Vizag, Kandla

Alkaatuff good foaming qualities

Shipchandler in Vizag Port

Lime wash is not suitable for cargo like Sulphur loading

Short Description:

Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Information:

Polymer based water soluble liquid product which is resulting thin transparent and temporary film on cargo hold surfaces. Polymer based Thin film acts as barrier layer between the cargo and the ship hold surfaces.

Slip Barrier Coats HOLD BLOCK is a Heavy Duty protective Solution for the hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly.
$ Safe to use in occupied / covered areas.
$ Reduces turn around times.
$ Easy to Direct Spray.

Other Important materials, which help to control corrosion on the metal surface. Chemically SULPHUR producing STRONG acid in presence of moisture under excess of temperature, Freshly prepared acid during the reaction rapidly damaging steel surface. This can be prevented by ACID neutralisation method. RXSOL BILGE COAT is specially meant to solve this issue. For more details of product, You may click here to know more details about product and using procedures.

RXSOL Bilge Coat (Sulphur Acid Neutralizer) Acts as Acid Neutralizer formed during sulphur voyages.

HOLD BLOCK chemicals supplier.

FAQ - Slip Barrier Polymer Coat

Capt. ravi.prakash 4:54 PM (3rd JAN'19)
to RX MARINE INTERNATIONAL
Dear Sir,
Ref our telcon, please find attached Hold photos after discharging of Australian Coal and cleaning (without applying any chemicals) in oct 2018 . Then vsl loaded Indonesian Coal and will be discharging same in abt a week. Next voyage is getting fixed to load Urea from Saudi. Basis the photos, which chemical would you suggest to be used. We were thinking of RXSOL PCS along with Alkaatuff. Fyi, Owners have supplied 1200 Ltrs of Alkaatuff HF last month.
Thanks & best regards,
Capt. ravi.prakash
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Dear Sir,

In image we can observe that BOTTOM line of hold is rusted, And your plan to load CLEAN CARGO like urea which is ammonia-ted product can result further heavy rusting. So here our suggestion is to go with PCS with Alkaatuff HF. And after cleaning hold rust can be treated with RUST CONVERTOR by the ratio of 1:100 Ltr with water, this will change free iron rust content to orginal metal colour. ( For treatment of rust Each Hold maximum 50 Ltr RUST CONVERTOR REQUIRED ) and Finally HOLD can be treat with SLIP barrier Polymer COAT polymer, with dilution ration of 1:100 Ltr with Water. ( For Each Hold polymer coating maximum 50 Ltr Slip Barrier Polymer Coat REQUIRED )

Refer this link to get IMAGE of CARGO HOLD. http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

USES of slip barrier coat provide transparent POLYMER layer in between UREA and HOLD surface.

Application of SLIP Barrier Polymer COAT is always be wise decision, this will not only protect hold metal surface from UREA contact, but also helps to release cargo without adhesion on cargo.

Thanking you

WBRGDS

Silvi

http://rxmarine.com/sites/default/files/CARGO HOLD CONDITION REPORT 12.10.2018(1).xlsx

Slip Barrier Polymer Coats HOLD BLOCK supplier in all major port of India and Middle East. We are keeping ready stock at Kandla, Mundra, Sikka, Navlakhi, Hazira, Mumbai, JNPT, Visakhapatnam, Gangavaram, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi. Slip Barrier Polymer Coats HOLD BLOCK also works as surface releasing agent and due to its chemicals resitance nature protect metal surface of ship from hazardous cargo.

Protective Chemicals suitable for both sulphur and petcoke cargoes

FAQ:

Can you please advise us on best chemicals for cleaning hold block applied to ship's bulkhead and tanktop. - Capt Manjit Handa, Marine Surveyor - Noah's Ark Solutions

Comparision Lime wash and slip barrier coat Holdblock

Salt loading precaution

Read more
10979 reads

Antiscalant Antifoulant Corrosion Inhibitor 704

Alias:

Genesys RC - Antiscalent, Antiscalant IBC Hypersperse MDC704, KylinTreat M704 Reverse Osmosis Antiscalant Phosphorous free

Active Matter:

81-85

Application:

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.

Packing Size:

25.00 Kg.Liq

Using Procedure:

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature	Maximum Dilution %
<30°C	10
30 – 35°C	25
>35°C	50

Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Note:

Future & Benefit

Excellent results as a replacement for softenerfilters
Compatible with SoliSep* MPT150 coagulant
Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
Compatible with all of the leading RO membranes
Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
Effective over a wide pH range
May be fed neat or diluted
Compatible with feedwaters that contain aluminum and iron oxides

Handling :

Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Related Products:

Evaporator Treatment Chemical

ENGINE SCALE Guard NB

Membrane Antiscalant ALKA 191T

Corrosion Inhibitor 8050

Corrosion Inhibitor Multifunctional Closed Chilled Systems

Safety Accessories:

Gloves Disposable

Goggle Chemical Protective

Article News:

Types of Corrosion Inhibitor

What is Corrosion Inhibitor?

Antiscalant Supplier

RX Marine Contact Details

Water treatment chemicals

Short Description:

Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Reverse Osmosis Antiscalant, Phosphorous free

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is a highly effective antiscalant developed to control scale precipitates of Silica, Calcium Carbonate, Calcium Sulfate, Barium Sulfate and Strontium Sulfate, and reduce particulate fouling in the membrane separation systems of reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF).

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is phosphorous free. It is formulated by high performance multipolymers.

Highly effective over a wide-range of waters – for calcium-based and sulfate-based scales, notably, barium sulfate.

RO ANTISCALANT

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Effectively control CaCO3 up to LSI +3.0, CaSO4, SrSO4, BaSO4, CaF2, SiO2, Fe2O3, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 RXSOL is compatible with all of the leading reverse osmosis membranes, such as Dow, Filmtec, GE, Hydranautics, TORAY, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

Antiscalant Antifoulant Corrosion Inhibitor 704 helps to extend the membrane life and reduce the running cost.

Antiscalant Antifoulant

Read more
3839 reads

Sodium Lauryl Ether Sulfate 70 %

Sodium Lauryl Ether Sulphate RXSOL-12-1880-235 is an anionic surfactant. It is water-soluble. It has excellent foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants. However, due to its anionic character, it should not be used with cationic components like cationic surfactants, cationic dyes, etc.

Alias:

SLES 70, Sodium Lauryl Ether Sulphate Paste, Texapon N70

Active Matter:

70-72

Application:

Sodium Lauryl Ether Sulphate RXSOL-19-1880-050 is used for a wide range of applications such as:

In shampoos, foam baths and shower gels as a basic surfactant and foaming agent.
In liquid detergents and dish washing formulations for detergency and foaming.
In bathing bars, body wash, liquid soap, etc.

Packing Size:

220.00 Kg.Liq

Using Procedure:

Chemical Name	: Sodium Lauryl Ether Sulfate
INCI Name	: Sodium Laureth Sulfate
CAS Number	: 68891-38-3
EC Number	: 500-234-8
Chemical Formula	: R-OCH2CH2OCH2CH2OSO3Na

(R = C 12-14 natural)

Note:

PACKING :

Sodium Lauryl Ether Sulphate RXSOL-19-1880-050 is available in 220 kg /160 kg HMHDPE carboys. Total of 80 / 118 carboys i.e. 17.6 MT /17.7 MT can be shipped either palletized or non-palletized in 20 ft. full container load. It can also be shipped in IBC of 1 MT capacity and ISO containers with capacity of 22 to24 MT.

HANDLING AND STORAGE

Store in a clean, dry area, away from sunlight and heat. The recommended storage temperature is 20°C – 35 °C. Keep carboys tightly closed. In the original sealed carboys and kept at recommended storage conditions, the product can be stored for at least 1 year. Spills should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, seek adequate and timely medical attention. Stacking should be maximum 1+1 carboys.

Related Products:

Glycerine

Sodium Dodecyl Sulfate Powder

Sodium Dodecyl Sulphate

Acid Slurry LABSA 96 to 98 250 Kg

Safety Accessories:

Carboxy Methyl Cellulose CMC

SODA ASH 25 Kg

Short Description:

Excellent Foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants

SLES, Sodium Lauryl ether Sulfate, Sodium lauryl ether sulfate suppliers in Mumbai, Kandla, Gandhidham, Kolkata, Howrah, Vizag, Chennai, Tuticorin. RXSOL brand Sodium lauryl ether sulfate or RXSOL brand SLES is one of the most supplied chemicals by us. We are one of the largest Sodium lauryl ether sulfate suppliers and exporters in Mumbai, Kandla, Gandhidham, Guajarat, Kolkata, Vizag, Chennai etc. sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india
sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl sulphate manufacturer gujarat
sodium lauryl ether sulphate manufacturing process
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium dodecyl sulfate
ammonium lauryl sulfate
sodium lauryl sulfoacetate

sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india

SLES Sodium Lauryl Ether Sulphate exporter and supplier in South Africa, UAE Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Muscat Barka Sohar, Oman, Mumbai, Kandla Gandhidham, Visakhaptnam, Chennai, Kolkata, Canada, Nairobi Kenya, Sudan Yemen

SLES sodium Lauryl Ether Sulphate developed in chemicals field to cover demand of personal care and home care products like Shampoo, Bubble Bath, Shower Gel, Face Wash, Dish Wash, Liquid Detergent and Hand Wash. SLES not only used in detergent and cosmetic industry but also popular in the printing and dyeing industry, petroleum and leather industry as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent.

SLES Paste 70 Percent

Read more
1220 reads

Xylene AR reagent

Xylene analar reagent grade for oil, Scale Composition tests, metering operations.

Alias:

XYLENE ANALAR,2.5LTR

Application:

Xylene analar reagent grade, We are one of popular supplier in marine oil field Industries, for oil Scale Composition tests, metering operations.

Packing Size:

2.50 Ltr.

Using Procedure:

MSDS And Certificate are available through email.

Note:

2.5 Ltr Glass bottle packing.

Short Description:

Xylene analar reagent grade for oil, Scale Composition tests, metering operations.

Xylene AR reagent manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Xylene AR reagent at a competitive price from us. We have ready stock of Xylene AR reagent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

4049 reads

Multi Purpose Degreaser

Alias:

Rydall MP

Active Matter:

72-81

Application:

Renovate Industrial Multi Purpose Cleaner is a solvent-free, heavy duty restoration cleaner for the removal of dry soot, carbon, fire residues, filtration soils RXSOL MP multi-purpose degreaser Industrial Cleaner is a water-soluble, alkaline solution that contains specially modified additives for improved oil holding capacity, surface wetting, and low-foaming attributes. Our Multi-Purpose degreaser is one of the strongest, non-solvent based, degreasers available on the market. RXSOL MP multi-purpose degreaser Industrial Cleaner is developed for extreme applications where only the harshest of alternatives would cut the deposits.

RXSOL MP multi-purpose degreaser Industrial Cleaner is a non-acidic, non-flammable, highly effective oil and fat remover, which is able to remove heavy organic components. RYDALL MP also provides a complete rinse off of the pollutants without any danger of combustion and without leaving any greasy films.and draught marks on carpets, fabrics and other surfaces.
• Highly effective pre-spray on polypropylene carpets.
• Can be used in conjunction with Colour "Safe Bleach OxiBrite" ( www.rxmarine.com/colour-safe-bleach ) Part No. - RXSOL-41-8731-025
• Cationic solvent-free formula “pulls out” soils by neutralising electrical charge.
• Deodorises on application.
• Red liquid with floral fragrance.
pH Concentrate: 12
pH Diluted: 10.5

Packing Size:

25.00 Ltr.

Using Procedure:

Normal soil:
Dilute 10 to 20ml A217 per litre of warm water (1:100 to 1:50).
Heavy soil and restoration: Dilute 50ml per litre of warm water (1:20).
Ceiling cleaning: Add 50ml "Safe Bleach OxiBrite" ( www.rxmarine.com/colour-safe-bleach ) Part No. - RXSOL-41-8731-025, per 5 litres of Renovate Industrial solution. (Observe cautions below).

Pressure washing:
Mix 1 part Renovate Industrial Multi Purpose Cleaner with 4 parts water and meter at desired setting.Always pre-test surface in an inconspicuous area before proceeding. Do not use on water sensitive fabrics, unsealed wood, aluminium or other delicate surfaces.Apply by sprayer, sponge or floor machine. Allow 2 to 5 minutes contact time for heavy soil, scrub if needed, then rinse surface thoroughly with clean water. Observe all safety precautions. ear suitable personal protective equipment and cover all sensitive furnishings.

Note:

RXSOL MP multi-purpose degreaser Industrial Cleaner is food-grade as a safe general cleaner (A1) for food processing facilities!

RXSOL MP multi-purpose degreaser Industrial Cleaner is a water-soluble, mineral oil-free, alkaline solution containing specially modified additives for improved oil holding capacity, surface wetting, and low-foaming attributes. This non-acidic, non-flammable degreaser is also a powerful oil and fat remover effective in removing heavy organic components. RXSOL MP multi-purpose degreaser Industrial Cleaner completely rinses off pollutants without danger of combustion and leaving behind a greasy film.

Related Products:

Degreaser Heavy Duty

Degresol High Flash Point Degreaser

Degreaser Solvent

Moya Oil Degreaser

Safety Accessories:

Degreaser Bio Degradable

Degreaser Low Foam, Floor Cleaner

Degreaser Non Phosphate

Degreaser Soy and VOC Free Tar Remover

Short Description:

Heavy duty industrial Multi Purpose cleaner for use on floors, walls, carpets, hard surfaces, porous surfaces and many other professional and disaster restoration applications. A highly concentrated can be use as multi purpose.

HOW TO USE RXSOL MP multi-purpose degreaser Industrial Cleaner

Liberally spray on virtually any water washable surface and let sit for 20-30 seconds. Wipe clean and rinse with water. For stubborn stains, repeat the procedure. It is as safe and as simple as that! The reason for the short wait time is because the RXSOL MP multi-purpose degreaser Industrial Cleaner is a highly effective oil and fat remover that is able to crawl under the residues on machines and equipment. This Multi-Purpose degreaser/cleaner includes specially modified additives for improved oil holding capacity, low foam, and maximum surface wetting. When sprayed on the equipment, RXSOL MP multi-purpose degreaser Industrial Cleaner starts to soak around and underneath the oily accumulations, lifting them from the surface allowing the deposits to be wiped and/or rinsed away!

Multi Purpose Renovate Industrial Cleaner manufacturer and supplier in Navi Mumbai, Kakinada, Gandhidham, Surat, Chennai, Visakhpatnam, Andhra Pradesh, Kolkata, Chennai, Fujairah, Sharajha, Dubai, Abudhabi, Ajman, UAE Gulf, Ruwi Barka Sohar, Muscat Oman, Nairobi Kenya, Sudan, Yemen, Canada

Multi Purpose Cleaner

Read more
646 reads

Calcium Hypochlorite Granules

Alias:

Altoch GP, Chlorine Granuels 45 Kg

Active Matter:

70-80%

Application:

RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms. Since calcium hypochlorite as a solution is a very efficient killer of virtually all bacteria, algae and other objectionable micro-organisms, it is used as a standard for comparison testing of other sanitizing chemicals. While calcium hypochlorite is used primarily to chlorinate swimming pool, spa and hot tub water, and to treat water supplies and sewage, it is also frequently used as a bleaching agent and sanitizer in industrial applications.

Rxsol Calcium Hypochlorite granules can be used for continuous chlorination or applied manually.Swimming Pool, Spa and Hot Tub Operators use calcium hypochlorite as a routine sanitizer to kill and prevent the growth of algae, bacteria, and other microorganisms. It is also widely used as a shock treatment to destroy organic contamination in pool water, thereby improving the water clarity. Strong calcium hypochlorite solutions serve as disinfectants for cleaning pool sides and bottoms, decks, diving boards, ladders, floats, locker and shower room floors and benches, sinks and toilets.

Municipal Water Treatment —

Municipalities use calcium hypochlorite in place of chlorine gas or liquid bleach to purify water. It is also effective for treating wells; sanitizing new water mains; controlling algae, especially sudden growths, in reservoirs, filters and other equipment; treating sewage and controlling odors.

Wastewater Treatment —
Calcium hypochlorite is used to treat wastewater effluents under controlled conditions by textile mills, paper mills, tanneries, food processing plants and more.

Other Applications —

Other uses for alcium hypochlorite include sanitizing food and beverage containers and production equipment in dairies, restaurants, hospitals and farms. Calcium hypochlorite also is used to control algae and slime in commercial and industrial cooling water systems.

Packing Size:

45.00 Kg.PWD

Using Procedure:

HS Code 28281090

Drinking Water disinfectant easiest process is to add 1-pound of calcium hypochlorite in granular form in to 10,000 gallons of drinking water. And Calcium Hypochlorite is widely available for use as swimming pool chlorine tablets or white powder that is much more stable than chlorine.

Variety of disease causing organisms including bacteria, yeast, fungus, spores, and viruses growing in water. RXSOL brand have easiest method to test such polluted water by simple test method.

Note:

Typical Properties

Chemical Name	:	Calcium Hypochlorite
Chemical Formula	:	Ca(OCl)2
Granular Bulk Density	:	lb/ft3 64
Chemical Assay of Calcium Hypochlorite
Active Ingredient Calcium Hypochlorite	:	73% nom
Inert Ingredients, Readily soluble salts	:	27%
Minimal Available Chlorine	:	70%
Solubility in Water Granular calcium hypochlorite dissolves readily at	:	77°F.
Sample Solutions	:	1 lb. in 80,000 gallons = 1 ppm AvCl. 2 dry oz. in 1 gallon = 1% solution or 10,000 ppm
pH Solutions
AvCl, ppm	:	pH
100 200 600 1000	: : : :	9.7 10.00 10.4 10.7

Related Products:

Trichloroisocyanuric Acid Tablet

Sodium Hypo Chlorite 12-15%

Chlorine Tablet

Sodium Dichloroisocyanurate Dehydrate

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Chemical Protective Suit

Video Links:

Calcium Hypo chlorites Chlorine source Granules

Article News:

Calcium Hypochlorite granular form supplier

Short Description:

RXSOL Calcium Hypochlorite is a widely used chlorine compound that is highly effective against bacteria, algae, slime, fungi and other harmful and objectionable micro-organisms.

Other valuable water treatment products also available with us :

Calcium Hypochlorite 65 - 70% CHLORINE POWDER, 45 kg / drum

Calcium Hypochlorite 70 % 2G (Pack / 200 tables X 1.7 g )

Calcium hypochlorite 70% 200g tablet

Chlorine tabs Oasis 33mg ( carton /1000 tab)

CITRIC ACID MONOHYDRATE, 25kgs/bag

Citric Acid Anhydrous with 25 kgs /bag

Softener salt treatment SALT TABLET 25/BAG Packing : 25kg / bag

Purolite resin C100E, 25KG Bag

Sodium Hexametaphosphate ( SHMP 68 %) with new date, Packing : 25kg bags

Carbon ,25 kgs/bag

Carbon with diameter 70-90 , 25kgs/ bags

SODIUM HYPOCHLORITE

CHLORINE LIQUID PACKING : 20 LITER CONCENTERATE : 10 TO 12 %

FORMALIN LIQUID PACKING : 25 LITER CONCENTRATE: 35 TO 37 %

HYPOCHLORITE ACID CONCENTRATE : 98% PACKING : 25 LITER
Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS)
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Methanol Packed : 25 liter 20

50 % Hydrogen Peroxide Packed : 25 liter

Hydrochloric acid Packed : 25 liter

Mixed bed PUROLITE with 25 Liter / kgs /bag ,ANION OH ,PUROLITE MB400

Sodium Carbonate (Soda Ash)
Calcium Hypochlorite 65% (Cal Hypo)
Sodium Bicarbonate (Baking Soda, BiCarb)
DiChlor 5 Cyanuric Acid (Chlorine Stabilizer, Conditioner)
Potassium Monopersulfate (KMPS or MPS)
Sodium Bisulfate (Dry Acid)
TCCA C3O3N3Cl3 - 90% min Tablets 200g

Calcium Hypochlorite Granules manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Calcium Hypochlorite Granules at a competitive price from us. We have ready stock of Calcium Hypochlorite Granules in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

#CalciumHypochlorite_Granules
#Chlorine_Granules
#ChlorineGranules_supplierMuscatDubai

Chlorine Granuels Powder

FAQ:

How to Disinfect Water Using Calcium Hypochlorite

Read more
5217 reads

Polyelectrolyte

RXSOL Polyelectrolite is a unique, medium molecular weight, anionic polyelectrolyte designed to be used as a precipitation aid and sludge conditioner for waste water treatment systems.

Application:

APPLICATION & ADVANTAGE :

Immediate flocculation activity.

Non-hazardous to use.

RXSOL Polyelectrolite has been found particularly effective for metal finishing and most industrial thickening and clarification operations as well as metal hydroxide precipitation.

Very economical to use.

RXSOL Polyelectrolite is designed to be used at full strength, eliminating the need to make up stock solutions prior to use, thus completely eliminating the make up difficulties of powders and emulsions. It blends into the waste stream immediately with no undissolved particles, globules or waste.

Effective over a wide pH range.

Works well with other treatment aids.

RXSOL Polyelectrolite concentrated formula is extremely economical to use. One gallon of RXSOL Polyelectrolite will treat up to 100,000 gallons of waste water. It may be injected into a flowing stream, or may be metered into an agitated flocculator tank.

Packing Size:

25.00 Kg

Using Procedure:

RXSOL Polyelectrolite should be metered full strength into the flocculation station of conventional hydroxide precipitation waste water treatment systems. Typical feed rates of RXSOL Polyelectrolite vary from 8 to 12 ppm which is the equivalent to one gallon treating 25,000 to 82,000 gallons of waste water. RXSOL Polyelectrolite works well over a wide pH range with values of 7.5-10.0 being optimum. Uniform agitation is vitally important for optimum contact. Mild agitation by low speed non-shear agitators is recommended. Do not use high speed mixers or pump recirculation for mixing or an agitator speed over 100 RPM. These methods will shear and break up the floc formation. Due to the wide variety of waste water treatment facilities, equipment and waste material to be treated, it is recommended that a water treatment study be performed to assure the most cost effective treatment method available. .

Note:

STORAGE/HANDLING

Store at 40-95° F (5-35° C) for maximum stability. Keep away from heat, sparks and open flame. Do not get in eyes, skin or clothing. Do not take internally. Wear proper protective clothing and face shield. Material spilled on floors is very slippery and most difficult to wash down. Material should be scooped up as much as possible and the remaining thin film adsorbed with absorbent clay or sweeping compound. Refer to the Material Safety Data Sheet for more complete details.

Related Products:

Anionic Polyelectrolyte (RX Floc 100)

Flocculant Anionic Polymer DAF

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Short Description:

Anionic polyelectrolyte used in raw water and wastewater treatment

POLYELECTROLYTES

High Molecular weight flocullant polymers available in Anionic, Cationic grades
Description:
High molecular weight flocullants are capable of promoting flocullation by neutralizing the superficial electric charges of sludge particles in the water and unstabilizing each individual particles. The particles then are absorbed by the activated functional group in the flocullant polymer.

Powder Grades :

Anionic Polyelectrolyte
Cationic Polyelectrolyte

Water and Dustproof 10kg Bag

LIQUID Grades :

Anionic Polyelectrolyte
Cationic Polyelectrolyte

(FOOD GRADE SUITABLE FOR DRINKING WATER)
High Density Polyethylene Carboys 50kg Carboy

Polyelectrolyte manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Polyelectrolyte at a competitive price from us. We have ready stock of Polyelectrolyte in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Waste water treatment chemicals Polyelectrolite

4367 reads

Cool Water Treat Corrosion Inhibitor

Cooling water Treatmanet Corrosion Inhibitor NCLT is specialized Cooling Water treatment chemicals for a closed re-circulating water system. Suitable for all types of engines where water circulation permitted. Major engine manufacturers such as MAN Diesel and Wartsila have a suggestion to use proper balance dose of Nitrite, Borate and organics based corrosion inhibitor in water circular line.

Alias:

C.W.T. Inhibitor, COOL water TREAT NCL, RXSOL 9-111, AQUATREAT CS 8535, Cool water Treat, Maxtreat 2925, NCLT Coolant Inhibitor 25

Active Matter:

45-50

Application:

Liquid product, easy to use. Environmentally friendly, fully organic product, low toxicity. Effective against cavitation and erosion. Superior heat transfer properties. Compatible with hoses, gaskets and seals. Compatible with glycols for frost protection. Stable product - non-depleting. The product used for corrosion inhibition in many types of closed re-circulation system such as: - Diesel engine cooling water systems - Compressor cooling water systems - Centralised cooling systems - Hot water heating systems - Auxiliary machinery cooling systems.

Packing Size:

25.00 Ltr.

Using Procedure:

Using Method : -

RXSOL Cool water Treat Corrosion Inhibitor is a highly effective corrosion inhibitor for all common metals in cooling water systems.Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool water Treat Corrosion Inhibitor applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces.

For new builds, RXSOL recommends cleaning of the water system before commercing service. The system will always contain small amounts of oil and iron oxides, and this can be easly removed in 1 time with Rxsol Commissioning Cleaner. If the system is corroded or is more heavily contaminated use Rxsol Degreaser HD. RXSOL Safe Acid for removal of metal oxides or scale is recommended.
For systems previously treated with other products, RXSOL Ships Service recommend to drain and flush the system before refilling with distilled water and Cool WATER treat . The system should be clean and free from scale and corrosion products when starting the treatment.
The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water Treat Corrosion Inhibitor can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.

Dosing method
Cool water Treat Corrosion Inhibitor should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.
Dosage and control
Cool water Treat Corrosion Inhibitor should always be present in a concentration of 5% or higher in the system. It is good practice to start with initial dose for an untreated system of 60 litres of Cool water Treat Corrosion Inhibitor /ton. 5% will provide sufficient protection of the system for a period of two to five years under normal conditions provided. To prevent residual falling below minimum level due to loss of cooling water, RXSOL Service recommend to maintain a level of 6% Cool water Treat Corrosion Inhibitor in the cooling system.
The engine manufacturer's recommendations for water quality should always be complied with. Cool water Treat Corrosion Inhibitor provides good protection even with contamination of the system by i.e. inorganc salts.Maintain Chloride levels and other contaminants at a minimum level. Most engine manufacturers recommend a maximum of 50 ppm Chlorides.

Note:

CHEMICAL,PROCESS, CORROSION INHIBITOR, LIQUID KG
COMPOSITION / INFORMATION ON INGREDIENTS:

- AN AQUEOUS SOLUTION OF SODIUM NITRITE

- Content : SODIUM NITRITE

- CAS # 7632-00-0

PHYSICAL AND CHEMICAL PROPERTIES

=================================

- PHYSICAL STATE : LIQUID

- ODOUR : MILD

- PH : 12.5 13.5

- FREEZING POINT : < - 10 °C

- INITIAL BOILING POINT : > 100 °C

- SOLUBILITY IN WATER : COMPLETE

- COLOR : PINK

Related Products:

ROCCOR NB Corrosion Scale Inhibitor Liquid

Engine Guard NB Scale Inhibitor DEWT

Cooling Treat 2910

Corroision Inhibitor for closed & Open cooling system

Corrosion Inhibitor Antifoulant Conc.

FERRO IOD CLEAN

Battery DEIONIZED Water

Cooling Treat 2910

Safety Accessories:

Anti Foaming Scale Inhibitor

Safe Acid Descale Powder

Article News:

Cooling Water Treatment-techniques and its Uses

Short Description:

Organic Liquid corrosion inhibitor with low-toxic poerty provides long-life corrosion protection for closed cooling water systems . Rxsol Cool water Treat Corrosion Inhibitor will protect all commonly used materials in engine cooling water systems, including aluminium. Cool water Treat Corrosion In

Features of Cool Water Treat Corrosion Inhibitor

Contains Corrosion inhibitors for C.S, S.S, & Cu, which helps to extend equipment life & reduce maintenance costs.
Contains no heavy metals compatible with antifreeze, no environmental restrictions.
Completely water soluble, which enhances complete system protection.
Contains high concentrations of active inhibitors, thus dosage rates become more cost effective.
Cool Water Treat Corrosion Inhibitor is most effective at pH> 8.0.
Cool Water Treat Corrosion Inhibitor is formulated with a synergistic blend of nitrite and other Inhibitors.
Contains a blend of alkalis to offer metal passivation.
Contains a special dye to trace system leaks & observe Inhibitor Concentration.
Cool Water Treat Corrosion Inhibitor contain special Corrosion Inhibitors that can tolerate moderate heat fluxes.
Contains Corrosion Inhibitors for soft metals (weld joints).

RXSOL Cooling water Treatmanet Corrosion Inhibitor is an organic liquid corrosion inhibitor with low-toxic property provides long-life corrosion protection for closed cooling water systems RXSOL Cooling water Treatmanet Corrosion Inhibitor will protect all commonly used materials in engine cooling water systems, including aluminium. Cooling water Treatmanet Corrosion Inhibitor does not contain components subject to rapid depletion. Cool WATER treat is stable and biodegradable

Cool water Treat Corrosion Inhibitor manufacturer and supplier in Mumbai, Gandhidham, Chennai Ennore, Visakhapatnam, Kolkata, Haldia, Hazira, Surat, Vizag, Fujairah, Sharjah, Ajman, Dubai, Muscat Canada, SUDAN, Yemen, Nairobi Kenya

Cooling Water Treatment chemicals for corrosion protection in closed re-circulating water system.

FAQ:

Nitrite Level 1200 to 2000 ppm

What is the Dosing ration of Cool Treat and Biocide in Cooling water System?

Add new comment
10082 reads

Metal Bright

Specially designed for removal of rust from any steel surface area and deposits left from the caustic based cargos like caustic soda. Also acts as SURFACE BRIGHTNER. Superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited with rust dissolving acid.

Alias:

METAL Bright, ETR 300, Formula 4, CR Degreaser D, Metal CLEAN, CD Degreaser and navadan 873, Marine Cleaning Agent Oxide Film Remover, MetalRust Cleaner, Metal Brite, MetalBrite 210 Ltr

Active Matter:

72-81

Application:

For a cargo tank cleaning agent, it can be used at the concentration of 5% to remove the stains after the cargo contains caustic based products.

Dilutions must be made in a plastic container. The acid should always be added to water, never the reverse.

To clean surfaces after welding or rusted surfaces use 50% Rust Remover-Water solution.

To remove stain or rust from brass and copper surfaces use between 20 – 50 % solution and rinse it with water after 15 –40 minutes.

On aluminum surfaces use 10 – 30% Metals Rust stain metal bright surface Cleaner -Water solution and after 5 minutes rinse it with water.

To remove rust from painted surfaces use 20 – 30% Metals Rust stain Brites surface Cleaner -Water solution and rinse with water after 15 - 40 minutes

To remove rust remains from ceramic, porcelain and glass surfaces; use 20 – 50% Rust Remover-Water solution for 20-40 minutes and rinse it with water.

To remove light cement and lime use 50% Rust Remover-Water solution and after 30 – 40 minutes rinse with water.

To remove rust in the pipelines and tanks use 5% Metals Rust stain Brites surface Cleaner -Water solution and circulate. On the other hand, if you use injection method use 3-5% Metals Rust stain Brites Cleaner -Water solution. Both circulation and injection must continue until the rust is removed.

Brushing is recommended for heavy rusty surfaces.

Packing Size:

210.00 Ltr.

Using Procedure:

Procedure for Use:-RXSOL-16-1011-210 is highly concentrate

Dilute in water (always use plastic jar and RXSOL-16-1011-210 should be added to water never add water to RXSOL-16-1011-210.)

Surface should be sound clean and free from oil, grease, dirt etc.

Before Application degrease and remove oily painted area, Then apply Metals Rust stain Brites Cleaner on the metal surface to get complete reaction of rust particle with metal bright till full dry the surface area. Repeat the metal bright 2nd times to get complete reaction of rusted surface. This will help to get solid chemically treated base for NEW PAINT COATING.

CONCENTRATION of Metal Bright : 10 to 40% for removal of light rust stain, while direct and neat Metals Rust stain Brites Cleaner required to dissolved heavy rusted stains.

Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)

Spraying Direction: – Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metals Rust stain Brites Cleaner This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metals Rust stain Brites Cleaner will show up in a Wall Wash.

Injection– Not suitable.

Re-circulation: – When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.

Note:

Specially designed for removal of rust from any steel surface area and rust stain from Brass , Copper , S.S wood , ceramic and aluminium surfaces , painted or not . And act as surface brightner.
For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.

Related Products:

LAC Alka Liquid HD

CTC Volc Cleaner

Degreaser Heavy Duty Alkaline Cleaner

HCF Remover 210 Ltr

VOYAGE SOL CLEANER Sea water cmpability

Alkaleen Cleaner Safety Liquid

Methanol Tech Grade 210 Ltr

DI Water Tech Grade 210 Ltrs

Hydrocarbon Remover Hcf

B Solve Tank Cleaner & Degreaser

SEA SOLVENT CLEAN

Bunker Cleaner C

Acrylate Cleaner Deodorizer - RXSOL X

Aqua Clean Break

Emulsion Sludge Breaker

Tankclean Alkaline Swift

TPOL Heavy Duty

Alkaleen Heavy Duty Liquid

Advance Tankclean

Carbon Remover Cleaner HD

Ballast Tank Cleaner

RXSOL ORG - 3 210 Ltr

Xylene

HCF Remover HD TANK Cleaner

Multi Clean TANK WASH

Wax Cleaner Paraffin Slack

SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS

ECOSOLV 222 ACID FRAC TANK CLEAN

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Protective Suit HD

PVC Chemical Resistance Boot

Cargo Hold Cleaning and Applicator Kit

Article News:

ALKACLEAN s. supplier in India - Middle East

Why Marine Chemicals?

TANK Cleaner for Tanker Vessel

Tank cleaner Detergent

Marine Chemical

Jaigarh Port Ratnagiri Tank Cleaning chemicals supplier

Tank Cleaner for Ship Vessel Marine chemicals

How to Clean SHIP TANK after discharging of caustic based cargo?

How to Clean Welding or Rusted metal parts?

Why RXSOL Metal Rust remover?

Metals Rust Remover using procedure

Metal Rust Shine – For effective cleaning

Alkaatuff, Air Cooler Chemical, Carbon Remover, Electrical cleaner supplier

Tank Cleaning steps for Rust stain removal

Chemistry behind Rust Cleaning chemicals.

Short Description:

Specially designed for removal of rust from any steel surface area and deposits left from the caustic based cargos like caustic soda. Also acts as SURFACE BRIGHTNER.

Rust Stain Remover degreaser and Detergent.

Acidic Rust stain Tank cleaning detergent to dissolve Rust Stain from SS Tank surface.

Metal Brights Cleaner HD

Metals Rust stain Brites Cleaner one of largest supplier in Fujairah, Abu Dhabi, Sharjah, Dubai, Mumbai, Kandla Mundra, Chennai, Ennore, Gangavaram, Visakhapatnam, Kolkata, Haldia, Paradip, Muscat Oman Barka

TANK CLEANING - RUST CLEANING detergent is Metal Rust Stain Brite. Most commonly use to clean SS METAL TANK.

Tank cleaning detergent for Rust Stain Removing and Cleaning

FAQ:

Alkleen Liquid Powerful tank cleaner

Why Iron Free surface required?

How to remove Oil | Grease | Paint from Steel Surfaces ?

Did You Know? Rust Dissolving Formula.

How Metal Clean Britte Rust Dissolving formula works?

Did you Know Marine cleaning agent for removal of cabin wall Oxides

14640 reads

Oleic Acid

An unsaturated fatty acid that is the most widely distributed and abundant fatty acid in nature. It is used commercially in the preparation of oleates and lotions, and as a pharmaceutical solvent.
Oleic acid is used as an excipient in pharmaceuticals and as an emulsifying or solubilizing agent in aerosol products. It may hinder the progression of adrenoleukodystrophy, a fatal disease that affects the brain and adrenal glands, and it may help boost memory.

Alias:

OLEICACID 210 LTR PACK

Application:

Oleic acid as its sodium salt is a major component of soap as an emulsifying agent. It is also used as emollient. Small amounts of oleic acid are used as an excipient in pharmaceuticals, oleic acid is used as an emulsifying or solubilizing agent in aerosol products. Small amounts of oleic acid are used as an excipient in pharmaceuticals. It is used as an emulsifying or solubilizing agent in aerosol products. Oleic acid have been shown to be important for the growth and productivity of Chinese Hamster cells. Functions of Oleic Acid in Cell Culture Systems: Long-term energy storage: energy derived from NADPH and ATP is stored in fatty acids. Fatty acids are esterified to a glycerol backbone to form a group of compounds known as mono-, di- and tri- glycerides (neutral fats). Energy is released when fatty acids are degraded. It is estimated that 40% of active substances are poorly soluble in water. The improvement of bio-availability of drugs with such properties presents one of the greatest challenges in drug formulations. This can be overcomed easily by using lipid based exciepients such as oleic acid to improve drug delivery system. Self emulsifying drug delivery system is one of the potential approaches for poorly soluble drugs which can be easily overcome by Oleic acid. Henceforth one can see a wide use of oleic acid as an excipient in drug delivery system.

Packing Size:

210.00 Ltr.

Using Procedure:

Oleic acid is used as a component in many foods, in the form of its triglycerides. It is a component of the normal human diet, being a part of animal fats and vegetable oils.

Oleic acid as its sodium salt is a major component of soap as an emulsifying agent. It is also used as an emollient. Small amounts of oleic acid are used as an excipient in pharmaceuticals, and it is used as an emulsifying or solubilizing agent in aerosol products

Note:

Oleic acid is soluble in benzene, chloroform, ethanol, ether, hexane, fixed volatile oils and practically insoluble in water.

INCOMPATIBLE WITH:- Aluminum, Calcium, Heavy metals, Iodine solution, Perchloric acid and Oxidising agents

iodine solutions, perchloric acid and oxidizing agents.

insoluble in water.

Viscosity

fixed volatile oils and practically

insoluble in water.

Viscosity fixed volatile oils and practically

insoluble in water.

Viscosity fixed volatile oils and practically

insoluble in water.

Viscosity ywdyg

fixed volatile oils and practically

insoluble in water.

Viscosity

fixed volatile oils and practically

insoluble in water.

Viscosity

Related Products:

Citric Acid Food Grade

Tri Ethanol Amine

Safety Accessories:

Acid Slurry LABSA 96 to 98 250 Kg

Sodium Lauryl Sulphate SLS

Short Description:

An unsaturated fatty acid that is the most widely distributed and abundant fatty acid in nature. It is used commercially in the preparation of oleates and lotions, and as a pharmaceutical solvent.

High Purity Oleic Fatty Acids

oleic acid exporters in Africa, oleic acid exporters in Bangladesh, oleic acid exporters in middle east, oleic acid exporters in Pakistan, oleic acid exporters in Southest Asia, oleic acid manufacturer in india, oleic acid manufacturer in mumbai, oleic acid suppliers in india, oleic acid suppliers in mumbai, oleic acid suppliers in Mumbai, Kolkata, pune, Vizag Visakhapatnam, Chennai, Ennore, Surat Gujrat, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Muscat Barka, Ruwi Oman, Sudan Yemen

Oleic Acid Manufacturers & Suppliers in India UAE Middle East Oman Sudan Yemen

We are a oleic acid Manufacturers in India, Exporters, Suppliers, Distributors, Traders and Exporters of High-Quality API, Lornoxicam, Ethyl Oleate, Linagliptin, Bromhexine.

Our Oleic Acid main Exports in Markets, Africa, Middle East, South, Latin America, Southeast Asia, SAARC, Pakistan and Bangladesh are dealers.

Oleic acid is a fatty acid that occurs naturally in various animal and vegetable fats and oils. It is an odorless, colorless oil, although commercial samples may be yellowish. In chemical terms, oleic acid is classified as a monounsaturated omega-9 fatty acid, abbreviated with a lipid number of 18:1 cis-9.

It has the formula CH3(CH2)7CH=CH(CH2)7COOH. It is the most common fatty acid in nature. The salts and esters of oleic acid are called oleates.

Oleic Acid Manufacturer and suppliet in Mumbai, Navi MUMBAI MIDC, Gandhidham, Chennai, Visakhapatnam, Kolkata, Odisha, Bihar, Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Middle East UAE, Muscat Barka, Oman, Canada, Sudan, Yemen, Nairobi Kenya AFRICA

Oleic acid is a Fatty acid colorless to yellowish

737 reads

Search

Passivation-38