Textiles / Looms-91

SODIUM STANNATE

Sodium stannate is the inorganic compound with the formula Na2Sn(OH)6. This colourless salt forms upon dissolving tin or tin dioxide in sodium hydroxide.

Alias:

SODIUM STANNATE, Sodium stannate formally sodium hexahydroxostannate(IV)

Application:

Sodium stannate is used as a stabiliser for hydrogen peroxide.

Packing Size:

25.00 Kg

Using Procedure:

Sodium stannate is used as a salt in alkaline tin plating electrolyte. It is used in surface coatings (paper). It is used in manufacturing other metallic stannates and tin oxide coatings.

In Cosmetic In Electroplating, As mordant in dyeing & printing, For fire proofing of curtains.

Short Description:

Sodium stannate, formally sodium hexahydroxostannate(IV)

White to light tan crystals with a characteristic odour

Mordant in dyeing, ceramics, glass, source of tin for electroplating and immersion plating, tex- tile fireproofing, stabilizer for hydrogen peroxide, blueprint paper, laboratory reagent.

Sodium tin(IV) oxide is used as a mordant, fire retardant textiles.

Sodium stannate is used as a salt in alkaline tin plating electrolyte. It is used in surface coatings (paper). It is used in manufacturing other metallic stannates and tin oxide coatings.

The largest use for inorganic tin compounds is in electrolytes for plating tin and tin alloys. The more important plating chemicals are chlorides, sulfates, and fluoroborates in acidic electrolytes and stannates in alkaline solutions. Inorganic-tin compounds are divided into two series: stannous, or tin(II), compounds and stannic, or tin(IV), compounds.Chemically, tin exhibits valencies of 2 and 4. It resists attack by water but is dissolved by strong acids and alkalis. One of common compounds of tin(II) are stannous chloride (SnCl2) used in tin galvanizing, as a reducing agent in the manufacture of polymers and as a mordant in dyeing.; stannous oxide (SnO) employed in making tin salts for chemical reagents and for plating; and stannous fluoride (SnF2) is the additive in fluoride tooth-pastes. Inorganic tin chemicals are used as catalysts in a number of industrial processes. stannous octoate is the catalyst that produces the foaming action that turns the liquid plastic into a foamlike solid structure in the manufacture of polyurethane foam. Tin(IV) compounds of significance include stannic chloride (SnCl4) is widely used as a stabilizer for perfumes and as a starting material for other tin salts; and stannic oxide(SnO2) is a useful catalyst in certain industrial processes and a polishing powder for steel. Tin sulfide is used as a bronzing agent for wood colouring

SODIUM STANNATE [Na2SnO3, CAS RN: 12058-66-1 (Anhydrous) 12209-98-2 (Trihydrate) 12027-70-2 (Hexahydroxide)]: white crystals; insoluble in water, alcohol; used as a salt in alkaline tin plating electrolyte; used in surface coatings (paper), in manufacturing other metallic stannates and tin oxide coatings; also known as preparing salt.

SODIUM STANNATE manufacturer, exporter, supplier in India, UAE Middle East, Oman, Canada. We are popular supplier of SODIUM STANNATE in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Barka Oman, Canada

Sodium stannate is fundamental in the metallurgic industry to remove arsenic and lead and in the ceramics and glass industries. The sodium stannate is applied for the production of tin based compounds and for the stabilization of peroxides. Sodium stannate is also used for tin surface treatment.

OTHER TIN PRODUCT...

STANNOUS CHROMATE, SnCrO4: a brown powder; slightly soluble in water; used to make porcelain and glass; also known as tin chromate.

STANNOUS METHANESULFONATE, Sn(CH3SO3)2, CAS RN: 53408-94-9; electroplating chemical

STANNOUS OXALATE, SnC2O4, CAS RN: 814-94-8, 17480-26-1: aA white crystalline powder; decomposes at 280 C; soluble in acids; used in textile dyeing and printing; also known as tin oxalate.

STANNOUS OXIDE, SnO, CAS RN: 21651-19-4 a black powder; insoluble in water, soluble in acids and strong bases; decomposes when heated; unstable in air; used as a reducing agent and chemical intermediate, and for glass plating; also known as tin protoxide.

STANNOUS SULFATE [SnSO4, CAS RN: 7488-55-3]: white to yellowish crystalline powder; decomposes rapidly in water; losing SO2 at 360 C; used for dyeing and tin plating; also known as tin sulfate.

STANNOUS SULFIDE [SnS, CAS RN: 1314-95-0]: a dark crystals; insoluble in water, decomposes in concentrated hydrochloric acid; melt point 880 C; used as an analytical reagent and catalyst, and in bearing material; also known as tin monosulfide.

sodium hexahydroxostannate(IV)

Textiles / Looms-91

227 reads

SODIUM THIOSULPHATE CRYSTAL

Sodium thiosulfate pentahydrate is a hydrate consisting of sodium thiosulfate with 5 mol eq. of water. It has a role as an antidote to cyanide poisoning, a nephroprotective agent and an antifungal drug. It contains a sodium thiosulfate.

Alias:

SODIUM THIOSULPHATE

Application:

Sodium thiosulfate is used in gold mining, water treatment, analytical chemistry, the development of silver-based photographic film and prints, and medicine. The medical uses of sodium thiosulfate include treatment of cyanide poisoning and pityriasis.

Packing Size:

25.00 Kg Crystal

Using Procedure:

Sodium thiosulfate (sodium thiosulphate) is an inorganic White crystalline solid compound. Also called Sodium thiosulfate pentahydrate, Disodium thiosulfate pentahydrate.

Also used as General bleaching agents, bleaching agents for textiles. And effectively used for cleaning/washing, including cleaning products used in the home, laundry detergents, soaps, de-greasers, spot removers, drycleaning, laundry, soap, window/floor cleaning etc.

Reported as not meeting GHS hazard criteria.

Note:

The invention provides a process for producing sodium thiosulfate. The process includes steps of adding sodium carbonate into a dissolving kettle, adding water into the dissolving kettle and primarily stirring the sodium carbonate and the water to obtain materials; heating the primarily stirred materials and secondarily stirring the materials; filling the dissolving kettle with sulfur dioxide gas after the materials are secondarily stirred, and slowly stirring the materials; filling the slowly stirred materials with nitrogen to dispel gas; transferring the materials into a reaction kettle after the gas is dispelled, inputting sulfur dioxide gas into the reaction kettle and filling the reaction kettle with the sulfur dioxide gas; adding sulfur into the reaction kettle and carrying out boiling reaction; cooling the reacted materials, filtering the materials and concentrating and crystallizing filtered liquid.

Related Products:

Sodium Sulphite

SODIUM HYPO CHLORIDE FOOD GRADE

Safety Accessories:

Salt Tablets

Guar Gum Powder

Short Description:

We process a white crystalline solid, sodium Thio sulphate anhydrous

#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

SODIUM THIOSULPHATE AR PENTAHYDRATE manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of SODIUM THIOSULPHATE AR PENTAHYDRATE at a competitive price from us. We have ready stock of SODIUM THIOSULPHATE AR PENTAHYDRATE in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

SODIUM THIOSULPHATE (PENTAHYDRATE) PURE manufacturer and supplier.

CRYSTAL THIOSULFATE SODIUM

Textiles / Looms-91

353 reads

ANTISCALANT 9209 RX Seawater Distillation Plants

Antiscalant 9209 RX is specially designed to control the development of scale in seawater distillation plants. It is based on a synergistic blend of phosphonates which are found to be more effective than other polymers at controlling carbonate and sulphate scale formation in sea water distillation units .

Alias:

Hydrex 9209, Metito M 915, Genesys LF

Active Matter:

94-98

Application:

PREVENTS IRON FOULING and SILICA ANTISCALANT properties.

Convenient liquid formulation for automatic dosing using suitable dosing equipment.
Prevents formation of hard scale in seawater distillation units.
Performance surpasses other similar products.
Cost effective concentrate.
Effective at high temperatures.

Packing Size:

30.00 Kg.Liq

Using Procedure:

The correct dosage rate is dependant upon several parameters, including feed temperature, pH, and chemical analysis and will be specified by your consultant after a detailed survey of your plant. To obtain the best results, Antiscalant 9209 RX should be added continuously using a suitable metering pump.

In general PRACTICE :
Antiscalant 9209 RX should be dosed continuously to the feed water upstream of the cartridge filters. Typical dosage rates are 2 – 4 mg/L.
Antiscalant 9209 RX may also be used in sea water applications where iron is present, recycle of brine is in use or there is no feed water pH reduction by acid dosing.

Typical dose rates are 0.5 – 1.0 mg/L
Antiscalant 9209 RX dose rate in the feed water should be less than 5 mg/L in potable water systems.
Antiscalant 9209 RX can be diluted and is fully miscible with water in all proportions.

Note:

Antiscalant 9209 RX is an aqueous solution of neutralised phosphonic acid. It has been approved for use in potable water applications and does not contribute to assimilable organic carbon (AOC), which can act as source of nutrient for micro-organisms.

Related Products:

Antiscalant RO

RXSOL Altreat 400

Antiscalant ORG EV 2030

RXSOL Altreat 400

Antiscalant RXSOL ORG EV

Membrane Antiscalant ALKA 191T

Safety Accessories:

Antiscalant Antifoulant Corrosion Inhibitor 704

RO Antiscalant 2020 High Silica Inhibition

Article News:

Antiscalant supplier in Mumbai

How to improve Distilled Water quality

Antiscalant Supplier

Short Description:

Antiscalant for Water Distillation Units , specially designed to control the development of scale in seawater distillation plants.

ANTISCALANT 9209 RX seawater distillation plants, Compatible with all types of polyamide membrane
ANTISCALANT 9209 RX powerfully Inhibits common scales Calcium carbonate/sulphate - Calcium phosphate, Barium/Strontium sulphate - Silica, Iron/Manganese

#AntiScalant_ManufacturerSupplier
#Antiscalant_DubaiAbudhabiAjmanFujairah
#Antiscalant_MuscatSoharOman
#Antiscalant_MumbaiChennaiKolkataSuratGandhidhamVizag

RXSOL-51-6005-025 ANTISCALANT and Antifoulant for Reverse Osmosis and Nano Filtration unit.

ANTISCALANT 9209 RX FOR seawater distillation plants manufacturer and supplier in Fujairah, Muscat, Barka, Oman, Dubai, Sharjah, Abudhabi, UAE Middle East, Ajman, Mumbai, Kolkata, Kandla, Visakhapatnam, Chennai Surat, CANADA, Kenya Nairobi, Jinja Uganda

ANTISCALANT 9209 RX Seawater Distillation Plants RXSOL-51-6005-025 is Suitable for Reverse Osmosis (RO) and NanoFiltration (NF) membranes

✓ Effective at LSI up to +2.6

✓ Excellent inhibitor for iron fouling

✓ Excellent silica antiscalant

✓ NSF listed product

✓ Approved for use in drinking water applications (UKDWI)

✓ Compatible with all types of polyamide membrane

✓ Replaces acid addition

✓ Inhibits common scales

- Calcium carbonate/sulphate

- Calcium phosphate

- Barium/Strontium sulphate

- Silica

- Iron/Manganese

ANTISCALANT 9209 RX Seawater Distillation Plants RXSOL-51-6005-025 Inhibits Scale Formation, Prevents Iron Fouling

Broad Spectrum Antiscalant and Antifoulant Liquid

8590 reads

Cool Water Treat

Alias:

C.W.T. Inhibitor 9-111, COOL WATER TREAT NCL, Coolwater Treat, Cool water treat, Cool Treat, Corrosion Inhibitor for Cooling Water, CoolTreat 25 Ltr

Active Matter:

45-50

Application:

Cool Water Treat is a highly effective corrosion inhibitor for all common metals in cooling water systems. Testing has shown no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these systems. Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool Water Treat applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces. For new builds, RXSOL Ships Service recommends cleaning of the water system before commencing service. The system will always contain small amounts of oil and iron oxides, and this can be removed in one operation. If the system is corroded or is more heavily contaminated, degreasing scale is recommended. For systems previously treated with other products, RXSOL Ships Service recommend to drain and flush the system before refilling with distilled water and Cool Water Treat . The system should be clean and free from scale and corrosion products when starting the treatment. The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water treat can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Packing Size:

25.00 Ltr.

Using Procedure:

Cool Water Treat should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.

Dosing and Control

Initial dosage for an untreated system is 60 litres of Cool Water Treat Cool water Treat Corrosion Inhibitor / ton of untreated distilled water (6%). This will provide sufficient protection of the system for a period of two to five years under normal conditions. 6% Cool water Treat Corrosion Inhibitor should also be dosed in all make up water added to the system to compensate for lost coolant. The engine manufacturer's recommendations for water quality should always be complied with. Chloride levels should always be as low as possible. Most engine manufacturers recommend a maximum of 50 ppm chlorides. For this reason, RXSOL Service recommends the use of distilled water as make-up.

Note:

Liquid product, easy to use
Environmentally friendly, fully organic product, low toxicity
Effective against cavitation and erosion. Superior heat transfer properties
Compatible with hoses, gaskets and seals
Compatible with glycols for frost protection
Stable product-non depleting
The product can be used for corrosion inhibition in many types of closed re-circulation system cooling water systems
Approved by major engine manufacturers

Related Products:

ROCCOR NB Corrosion Scale Inhibitor Liquid

Air Cooler Scale Dissolver

Engine Guard NB Scale Inhibitor DEWT

Safety Accessories:

Coolant Extended Life RXSOL ELC

Metal Bright

ENGINE SCALE Guard NB

Short Description:

Cool water Treat Corrosion Inhibitor can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Cool Water Treat is specialized corrosion inhibitor for Cooling Water system.

#CorroSionInhibitor_CoolingSystem
#CoolingWaterTreatmentChemicals
#CWTinhbitor_ManufacturerSupplierIndiaUAEoman

Cool Water Treat corrosion inhibitor for cooling water system manufacturer and supplier in Mumbai, Navi Mumbai, Gandhidham, Hazira Surat, Chennai Ennore, Vizag Visakhapatnam, Kolkata Haldia, Buzbuz, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Muscat, Oman, Canada, Nairobi Kenya, Sudan, Yemen

Cooling Water Corrosion Inhibitor

Read more
6300 reads

Acetone Pure ( CH3)2CO-I

Acetone supplier and exporter to middle east - Gulf. We have customized packing of acetone including 500 ml, 1 Ltr, 5, 20, 25, 50, 210 Ltrs Drum packing. Fully lab tested highly purified ACETONE supplier. Acetone is a solvent that has a variety of important uses and applications.

Active Matter:

99.9

Application:

ITEM	:	ACETONE ( CH3)2CO
DATE OF TEST	:	24.1.2013
SPECIFICATION OF PRODUCT
MIN ASSAY	:	99.5
BOILING POINT	:	56.1
IDENTITY	:	By IR SPECTRUM
Wt. PER ML AT 20OC	:	0.791g
WATER CONTENT, WT. % MAX	:	0.01%
COLOUR	:	10 HAZEN UNITS
CARBONISABLE SUBSTANCES	:	PASSES THE TEST
SOLUTION IN ALCOHOL	:	PASSES TEST
NON VOLATILE MATTER	:	0.OO5%
ORGANIC IMPURITIES	:	PASSES
PHASE	:	LIQUID

Packing Size:

25.00 Ltr.

Using Procedure:

Pure acetone for Dubai cosmetic industries, Paint Industries.

Note:

Also avialble in 500 ml printed round bottle, Label and brand Can be customized as per our customer demand.

Related Products:

ISO PROPYL ALCOHOL IPA

Methyl Ethyl Ketone

p Xylene Tech Grade 210 Ltr

Mto Kerosene

Short Description:

Available in customized packing of acetone including 500 ml, 1 Ltr, 5, 20, 25, 50, 210 Ltrs Drum packing. Fully lab tested highly purified ACETONE supplier.

Information:

Acetone exporter for Laboratory solvent, Paint Industries, Cosmetic Industries. RXSOL brand pure acetone is fully inspected and tested quality since 1995.

13422 reads

Sodium Hypo Chlorite

Sodium Hypochlorite solution, Used for sterlizing water and swimming pool...This will - Remove odors. Remove Color. Improve permaganate time.

Alias:

Chloros, Bleach, Twin Oxide Compound A, Ipo chlor 16%, Ipochlor Bluetech, Sodium Hypo Chlorite 25 Ltr

Active Matter:

12-15

Application:

Also used as a disinfectant and germicide , especially in the sterilization of water.
It is also used for making wool unshrinkable and in the manufactire of chloroform.
For the purpose of disinfection and bleaching , a weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficientPotable Water Treatment
Aquatics and Pools
Odor Control/Corrosion Control
Food & Beverage Processing
Wastewater Treatment
Cooling Towers, Inland Power Stations & Industry
Irrigation Systems
Agriculture/Farming

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL: Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Packing Size:

25.00 Ltr.

Using Procedure:

6% Sodium Hypochlorite Solution. Disinfectant for use in drinking water. Use one drop of solution per 10 ltrs of drinking water, 600 ml of solution per 36 tons of drinking water.

General formulation to calculate how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration.

req'd residual in ppm
Volume of hypo = volume of water x ( ----------------------------- )
1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add ?

(5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

(5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

                                                                                                              req'd residual in PPM
Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )
                                                                                                               1,000,000 x hypo %

This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

(8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds

Note:

Spraying - Following rough washing to a good Water White or better, apply dilute Bleach to 1 - 3% strength. First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.

Injection -no.

Re-circulation - Following rough washing to a good Water White standard or better, apply dilute Bleach to 1-3% strength. Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 - 500C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-850 C after 45 minutes. Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.

** When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between tanks as required.

* Use a strainer at the pump stack when circulating any solution.
Tank Lining - Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).

**These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.

Related Products:

Chlorine Tablets Calcium Based

Chlorine Tabs POWERFUL (3 Inch Jumbo Size)

Chlorine Liquid

Chlorine Scavenger

Sodium Thiosulfate Pentahydrate

Sodium Bisulphite Solution

Sodium Meta Silicate

Bleaching Liquid

WHITEX Bleach Liq

TPOL 20 Ltr BUCKET

Hand Cleaner Paste, Waterless 1 Kg Pkg

Dish Wash 500 ml

Toilet Cleaner-500 ml

Safety Accessories:

Hand Gloves Chemical resistance

RESPIRATORY PROTECTION HALF MASKS

Goggle

PVC Chemical Resistance Boot

Short Description:

Extra pure LAB TESTED Clear greenish-yellow liquid miscible in any proportion with water.

Sodium Hypochlorite manufacturer and supplier in Barka, Muscat, Sohar, Oman, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, UAE Middle East, Sudan, Yemen, Nairobi Kenya Africa, Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Kandla Mundra, Surat Hazira, Gujrat, Navi Mumbai MIDC

Note : Store in cool place

UN No : 1791
IMDG CLASS : 8

PACKING GROUP : III

ODOUR : IRRITATING, PUNGENT ODOUR

R31: Contact with acids liberates toxic gases

R34: Causes burns

S-PHRASES

S1/2: Keep locked up and out of the reach of children.

S28: After contact with skin, wash immediately with plenty of water

S45: In case of accident or if you feel unwell, seek medical advice (show the label where possible)

S50: Do not mix with acids

S50: Do not mix with reducing agents

X2: Restricted to professional users.Warning! Avoid exposure - obtain special instructions before use.

EMERGENCY AND FIRST AID PROCEDURES

EYE:

OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.

SKIN:

SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.

INIIALATION:

Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION:

NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material

Other Related PRODUCTS LINKS :

Textile Hypo Bleach , SODIUM HYPO CHLORITE , Sod Hypo Chlorite conc activeCHLORINE , CHLORINE LIQUID , Calcium Hypo Chlorite Conc active Chlorine , Chlorine Tablet cyanurate , Chlorine Tablets Calcium Based , DYE REMOVER ORG DICHLOR , Dechlorination Soln De-Hypo

Chlorine Alkaline Water

9878 reads

Clean GEL

Clean GEL / Paste is highly concentrate paste which is used to clean metal areas and is applied with brush. Useful for preparing metal surface for painting. Paint will adhere better to iron and steel surfaces when cleaned with Clean Jelly.

Alias:

GEL Degreaser

Application:

It is used to remove heavy scales, discolouration, annealing colours, rust particles near weld and welding affected area by heat without grinding or wire brushing or buffing.

PROBLEM	CLEARING AGENT	COMMENTS
Rust and other corrosion products. Embedded or adhering "free iron	Very light rust stain can be removed by 10% nitric acid. More significant rust or embedded iron will require pickling. Also see previous sections on Passivating and Pickling. Sand or glass-bead blasting is another option	Wear PPE as appropriate. Afterwards rinse well with clean water. Mix in acid-proof container, and be very careful with the acid, (See Precautions for acid cleaners)
Routine cleaning of boat fittings.	Frequent washing down with fresh water.	Recommended after each time the boat is used in salt water.
Cooking pot boiled dry.	Remove burnt food by soaking in hot water with detergent, baking soda or amonia.	Afterwards clean and polish. with a mild abrasive if necessary. See comments re steel wool.
Dark oxide from welding or heat treatment.	"Pickling Paste" or pickling solutions given on previous page.	Must be careful rinsed, and use care in handling (see Precautions for acid cleaners).
Scratches on polished (satin or brushed) finish.	Slight scratches - use impregnated nylon pads. Polish with polishing wheel dressed with iron-free abrasive for deeper scratches. Follow polish lines. Then clean with soap or detergent as for routine cleaning	Do not use ordinary steel wool - iron particles can become embedded in stainless steel and cause further surface problems. Stainless steel and "Scotchbrite" scouring pads are satisfactory.

Packing Size:

5.00 KgPaste

Using Procedure:

1.Clean Gel / Paste is applied on metal surrounding areas with a nylon bristled plastic brush. Application Temp. = between 5 – 40 deg. C
2. Keep Paste for 5 to 30 minutes (contact time) depending on contamination, temperature .
3. Use pressurised water jet spray OR wipe the weld seam lightly with plastic brush & wash with water thoroughly.

For Satin / Dull Finish

1. First remove oil, dirt,buffing compounds etc, with Rxsol Degreaser. Add 50-75 gm/lit. in water (i.e. 1 kg Rxsol Degreaser in 15 to 20 lit. water) & stir to dissolve. Wipe S.S surface with cotton cloth or pressurized spray for 2-5 min. or soak for 10 min. Then, wash with water properly.

2. Clean Gel Paste is applied on weld seam & surrounding areas with a nylon bristled plastic brush or by Paste sprayer or circulated in pipeline with pump.

Application Temp. = Room temp.( i.e. between 25-35 C). If temperature is less than 25 C, then more time may be required and if temperature is more than 35 C, then uneven preocessing & drying of applied materials may result.Then, cool SS equipment by keeping it in shade or cover by temporary shade to protect that not directly under the sun light.

3. Keep Clean Gel Paste for 10-45 minutes depending on contamination & scale. ( generally kept for 10-30 min. and Pickling Spray generally kept 30-45 min. Depending on SS type and initial condition of SS parts)

4. Wipe the weld seam lightly with plastic brush or cloth & wash the Paste applied area with water thoroughly.

For Cleaning Mirror Bright SS Areas

THE BELOW STEPS WILL NOT AFFECT SHINE OF MIRROR BRIGHT POLISHED SS AREAS AND PROVIDE CONTAMINATION & STERILE PARTICLE FREE PASSIVATED SS SURFACE.

1) First apply Clean Gel Paste in weld seam & surrounding areas with a nylon bristled plastic brush. After 10 to 30 min. wipe with cloth or plastic brush & wash water thoroughly.

(Application of Clean Gel Paste ensures that black & red spots do not come on & near weld seams area as generally observed some days after bright buffing.)

2) Complete bright buffing / polishing procedure to make surface mirror bright & shiny.

DISCARD STEPS 1 & 2 ABOVE, IF SS SURFACE IS ALREADY BRIGHT BUFFED OR ELECTROPOLISHED.

3) Remove oil, dirt buffing compounds etc. with RXSOL Degreaser which is Metal Free Degreaser. Add 50-75 gm/lit. in water & stir to dissolve.

Wipe S.S. surface with cotton cloth or pressurised spray for 2-5 min. or soak small parts for 10 min. Wash with water prpoerly.

NOTE: It is better to rinse SS surface with 10 gm/lit RXSOL DEGREASER solution as the last step and then rinse with water to ensure complete removal of previously applied Passivate Pickling paste or spray from the surface.

Note:

Advantage & Benifit

Easy to apply.
Due to paste easy to use on vertical surface.
Simply washed with water.
Easy to handle.
Easly remove heavy scales, discolouration, annealing colours, rust particles near weld and welding affected area .

Related Products:

Rust Convertor

Rust Remover

Rust Stain Remover SAFE JELLY

RX JELLY Pickling Paste

Metal Clean Britte

DE-SCALER DE-LIMER

DEGREASER

Hand Cleaner Paste, Waterless 1 Kg Pkg

TPOL 20 Ltr BUCKET

Heavy Toilet Urinal Cleaner

Dish Wash 500 ml

RXSOL RX 9

Boat Cleaner

Safety Accessories:

RESPIRATORY PROTECTION HALF MASKS

Hand Gloves Chemical resistance

PVC Chemical Resistance Boot

Chemical Protective Suit

Article News:

Clean Gel – An effective product to get mirror bright areas

Short Description:

Clean GEL Paste is highly concentrate paste which is used to clean metal areas and is applied with brush.

#CLEANGEL_MumbaiIndiaKolkata
#Cleangel_DubaiUnitedArabEmirates
#CleanGel_MuscatOman

Clean GEL manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Clean GEL at a competitive price from us. We have ready stock of Clean GEL in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

FAQ:

Hull Cleaner

9328 reads

GAS TURBINE Cleaner GTC 1000

RXSOL GTC 1000 GAS TURBINE CLEANER is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine -and also inhibits corrosion.

Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.

Alias:

Clean Blade GTC 1000, Compressor Washing Chemicals GAS TURBINE CLEANER

Active Matter:

98 - 99%

Application:

Gas Turbine Compressor Cleaning.

Packing Size:

220.00 Kg.Liq

Using Procedure:

By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL GTC 1000 GAS TURBINE CLEANER has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.

The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.

Note:

Appearance
Clear pale straw coloured liquid with a mild pleasant odour.

Solubility
Completely soluble in water. No agitation required.

Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.

Related Products:

Gas Turbine Compressor Cleaning Fluid RXSOL 27

Turbine Kleen 81 RXSOL

Safety Accessories:

Disc Separator Cleaner HD

Filter Cleaner Engine Oil

Short Description:

RXSOL GTC 1000 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors.

RXSOL GTC 1000 GAS TURBINE CLEANER Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen

Liquid Detergent for Gas Turbine Compressor Cleaning for GE Aircraft

1226 reads

Hydrogen Peroxide

Hydrogen peroxide is a chemical compound with the formula H2O2. It is the simplest peroxide (a compound with an oxygen-oxygen single bond) and in its pure form is a colorless liquid, slightly more viscous than water.

Alias:

H2O2 35 percent, HydrogenPeroxide 35 percent 30 Kg, Hydrogen Peroxide 35%

Application:

Hydrogen Peroxide has many use including House Hold, Domestic. Agriculture, Textile, Industries, Medical and West water Treatment.

Packing Size:

30.00 Kg.Liq

Using Procedure:

House Hold : One of the most common uses of hydrogen peroxide is as a disinfectant. Spray it on surfaces like kitchen counter top and wipe with a clean rag. It can be used as a mouthwash too. You have to dilute the chemical with water and use it for rinsing the mouth. This mouthwash is also said to whiten teeth. Ensure that you do not swallow the liquid, while rinsing.
It can also be used to wash vegetables and fruits, in order to get rid of germs and pesticides. Add some hydrogen peroxide to a bowl full of water (you may also add a few pinches of salt). Soak the veggies and fruits for some time. Remove them and rinse with cold water, before use.This chemical is also used to purify water in swimming pools.

Agriculture : Farmers use it as an insecticide. They spray diluted form of this chemical, on plants, so that the pests and weeds get killed, without causing harm to the plants. Its also used for watering plants. Mix an ounce of this chemical with a quart of water and use it on plants. Apart from boosting the level of oxygen in the soil, this mixture is also said to prevent root rot. Some people soak seeds in it, after diluting it with water. It is said that this will fasten the process of germination. For this purpose have to mix 1.5 teaspoons of hydrogen peroxide in a cup of water.

Textile: It acts as a stain remover. Put 1 spoon tea in 1 bucket water and let it sit for a while. After that, rinse the stains with water and soap.
As it has bleaching property, it is used as a bleach too.

IIndustrial :

Reduced Sulfur Compound Treatment for Refinery Wastewater

Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species.

Supplemental Dissolved Oxygen to Reduce BOD and COD

Hydrogen peroxide has been used to reduce BOD and COD in refinery wastewater Supply of Supplemental Dissolved Oxygen (DO) when biological treatment systems experience temporary overloads or equipment failure.Predigestion of wastewater which contains moderate to high levels of compounds that are toxic, inhibitory or recalcitrant to biological treatment.As indicated by these examples, hydrogen peroxide can be used as a stand-alone treatment or as an enhancement to existing physical or biological treatment processes, depending on the situation.

Wastewater Pretreatment
Hydrogen peroxide is one of the most versatile, dependable and environmentally compatible oxidizing agents. The relative safety and simplicity of its use as an oxidizing agent has led to the development of a number of applications in refinery wastewater systems.

Note:

Product specification

Molar mass :::--- 34.0147 g/mol
Appearance :::--- light blue; colorless in solution
Odor :::--- sharpBoiling point :::--- 150.2 °C, 423 K, 302 °F
Solubility in water :::---Miscible
Solubility :::--- soluble in ether, alcohol insoluble in petroleum ether
Viscosity :::---1.245 cP (20 °C)

Related Products:

Hydrogen Peroxide with Silver Nitrate Microquell shield

CHLOR NADCC Tablet 5 gm

ISO-PROPYL ALCOHOL IPA

Safety Accessories:

Sodium Hypo Chlorite 10-12.5%

Chlorine Liquid FG

Article News:

Borax as a Blood stain Remover

WEEKS' SPECIAL- Hydrogen Peroxide, Ethanol, Hypochlorous

Short Description:

Pure form is a colorless liquid, slightly more viscous than water.

Hydrogen Perxoide supplier and exporter in India and Middle East. H2O2 used as an oxidizer, bleaching agent and antiseptic.

#HydrogenPEROXIDE_Muscat
#HydrogenPEROXIDE_DUBAI
#HydrogenPEROXIDE_Mumbai
#HydrogenPEROXIDE_Surat
#HydrogenPEROXIDE_Kolkata

Hydrogen Peroxide 35% Exporter Importer and supplier in India UAE Oman, Nairobi, Canada. Pure Hydrogen Peroxide supplier in RUWI BARKA, Muscat Soha Oman, Fujairah, Sharjah, Ajman, Abudhbai, Dubai, Mumbai, Surat GIDC, Gandhidham, Chennai, Kolkata, Visakhapatnam, AndhraPradesh, Ennore, Paradip

Other Valubale Product distributor manufacturer supplier in India UAE OMAN:

Hydrogen peroxide 35%, 50%, 60%

Caustic Soda Flakes & Pearls

Phosphoric acid 85% Food grade

Soda ash light & Dense

CDEA

White Oil

Ferric Chloride 40-42%

Hydrochloric Acid 30-35%

Sulphuric Acid 98%

Nitric Acid 68% / 61%

Formaldehyde 37%

TDI 80:20

Methylene Chloride

H2O2

8067 reads

SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS

SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS are most popular lubricating agent in LPG BOTTLING PLANTS of IOCL and LPG BOTTLING PLANTS UNDER GUJARAT STATE , LPG BOTTLING PLANTS UNDER BIHAR STATE, Chain Conveyor System at HPCL Hubli and Mysore LPG Plants.

Alias:

Liquid soap for LPG plant chain conveyors, Brown Soap Solution, used in Chains in LPG bottling plants, CONKOTE BROWN SOAP

Application:

OTHER grades of RXSOL brand " SOAP POLYMER FOR LUBRICATION OF CHAIN CONVEYORS " soap solution contains POLYMER as well as an antibacterial agent. Polymer blend in SOAP solution gives extra smoothness on the conveyor belt, while Antibacterials Agent keeps solution free from any bacterial growth in soap solution. Fungal and Bacterial growth in soap solution is very common and easily spreading through all contacted materials on the belt. Our expertise team working on all such solution to control any hazardous bacterial growth in solution.

Packing Size:

25.00 Ltr.

Related Products:

Hand Cleaner Paste Waterless 1 Kg X 6 No

Carbon Remover

Electrosol NF

DEGREASER

TPOL 20 Ltr BUCKET

Article News:

Soap Solution for LPG Chain Conveyor System

Brown Soap for lubrication of Chain Conveyor

Soft Brown Soap Solution for Lubrication of Chain Conveyors

Short Description:

Brown Soap SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS

Soft Soap for lubrication of chain conveyors in LPG Bottling Plants under IOAODSO SO.
Work Description, IOAOD LPG Supply of Soft Soap for lubrication of chain conveyors in LPG Bottling Plants.

SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS at a competitive price from us. We have ready stock of SOAP SOLUTION FOR LUBRICATION OF CHAIN CONVEYORS in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Soft Brown Soap for Lubrication of Chain Conveyors in LPG

8361 reads

Search

Textiles / Looms-91