RO Chemicals-33

Antiscalant Antifoulant Corrosion Inhibitor 704

Alias: 

Genesys RC - Antiscalent, Antiscalant IBC Hypersperse MDC704, KylinTreat M704 Reverse Osmosis Antiscalant Phosphorous free

Active Matter: 
81-85
Application: 

For maximum effectiveness, Antiscalant / Antifoulant Corrosion Inhibitor 704 should be added prior to the static mixer or cartridge filter housing. For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water. Antiscalant / Antifoulant Corrosion Inhibitor 704 helps Block particles disperse to maintain the reverse osmosis membrane surface clean.

Packing Size: 
25.00 Kg.Liq
Using Procedure: 

Typical dosage range is between 1 and 6 mg/L. Maximum dilution is temperature related as shown:

Temperature  Maximum Dilution %
<30°C 10
30 – 35°C 25
>35°C 50

Important Note: Over and under-dosing may cause membrane fouling so please contact RX Marine International representative to define the optimal feed point and dosage rate. Maximum Dilutions

Note: 

Future & Benefit

  • Excellent results as a replacement for softenerfilters
  • Compatible with SoliSep* MPT150 coagulant
  • Highly effective over a wide-range of waters For calcium-based and sulfate-based scales, notably, barium sulfate.
  • Compatible with all of the leading RO membranes
  •  Maintains cleaner membrane surfaces by inhibition and dispersing particulate foulants
  • Effective over a wide pH range
  • May be fed neat or diluted
  • Compatible with feedwaters that contain aluminum and iron oxides

Handling : 
 
Avoid prolonged exposure. Provide adequate ventilation. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Use care in handling/storage.

Storage  : Store in a cool, dry place out of direct sunlight. Keep only in the original container.

Short Description: 
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Reverse Osmosis Antiscalant, Phosphorous free

 

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is a highly effective antiscalant developed to control scale precipitates of Silica, Calcium Carbonate, Calcium Sulfate, Barium Sulfate and Strontium Sulfate, and reduce particulate fouling in the membrane separation systems of reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF).

 

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 is phosphorous free. It is formulated by high performance multipolymers.

Highly effective over a wide-range of waters – for calcium-based and sulfate-based scales, notably, barium sulfate.

RO ANTISCALANT

 

RXSOL Antiscalant Antifoulant Corrosion Inhibitor 704 Effectively control  CaCO3 up to LSI +3.0, CaSO4, SrSO4, BaSO4, CaF2, SiO2, Fe2O3, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 RXSOL  is compatible with all of the leading reverse osmosis membranes, such as Dow, Filmtec, GE, Hydranautics, TORAY, etc.

Antiscalant Antifoulant Corrosion Inhibitor 704 Exporter, Manufacturer and supplier in India, UAE, Oman, Kenya. Antiscalant Antifoulant Corrosion Inhibitor 704 available ready stock at Mumbai, Nairobi, Kenya, Chennai, Kolkata, Visakhapatnam, Gandhidham, Kandla, Fujairah, Dubai, Ajman, Abudhabi, Dubai, Sharjah UAE Middle East, Canada, Jinja Uganda, Canada

Antiscalant Antifoulant Corrosion Inhibitor 704  helps to extend the membrane life and reduce the running cost.

Antiscalant Antifoulant

Antiscalant Antifoulant Corrosion Inhibitor 704

Packing Size: 
250.00 Kg.Liq
Short Description: 
Antiscalant / Antifoulant - Corrosion Inhibitor 704 is a highly effective liquid an-tiscalant/antifoulant developed to control scale precipitates and reduce particulate fouling within membrane separation systems

Sodium Lauryl Ether Sulfate 70 %

Sodium Lauryl Ether Sulphate  RXSOL-12-1880-235  is an anionic surfactant. It is water-soluble. It has excellent foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants. However, due to its anionic character, it should not be used with cationic components like cationic surfactants, cationic dyes, etc.

Alias: 

SLES 70, Sodium Lauryl Ether Sulphate Paste, Texapon N70

Active Matter: 
70-72
Application: 

Sodium Lauryl Ether Sulphate  RXSOL-19-1880-050 is used for a wide range of applications such as:

  • In shampoos, foam baths and shower gels as a basic surfactant and foaming agent.
  • In liquid detergents and dish washing formulations for detergency and foaming.
  • In bathing bars, body wash, liquid soap, etc.
Packing Size: 
220.00 Kg.Liq
Using Procedure: 

 

Chemical Name : Sodium Lauryl Ether Sulfate
INCI Name Sodium Laureth Sulfate
CAS Number 68891-38-3
EC Number : 500-234-8
Chemical Formula R-OCH2CH2OCH2CH2OSO3Na

(R = C 12-14 natural)

Note: 

PACKING :

Sodium Lauryl Ether Sulphate  RXSOL-19-1880-050 is available in 220 kg /160 kg HMHDPE carboys. Total of 80 / 118 carboys i.e. 17.6 MT /17.7 MT can be shipped either palletized or non-palletized in 20 ft. full container load. It can also be shipped in IBC of 1 MT capacity and ISO containers with capacity of 22 to24 MT.

HANDLING AND STORAGE

Store in a clean, dry area, away from sunlight and heat. The recommended storage temperature is 20°C – 35 °C. Keep carboys tightly closed. In the original sealed carboys and kept at recommended storage conditions, the product can be stored for at least 1 year. Spills should be contained / collected and disposed off as per the regulations. Avoid ingestion and contact with eyes, skin and clothing. In case of contact with eyes and skin, seek adequate and timely medical attention. Stacking should be maximum 1+1 carboys.

Short Description: 
Excellent Foaming power and detergency properties. It can be used with other anionic, non-ionic or amphoteric surfactants

SLES, Sodium Lauryl ether Sulfate, Sodium lauryl ether sulfate suppliers in Mumbai, Kandla, Gandhidham, Kolkata, Howrah, Vizag, Chennai, Tuticorin. RXSOL brand Sodium lauryl ether sulfate or RXSOL brand SLES is one of the most supplied chemicals by us. We are one of the largest Sodium lauryl ether sulfate suppliers and exporters in Mumbai, Kandla, Gandhidham, Guajarat, Kolkata, Vizag, Chennai etc. sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india
sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl sulphate manufacturer gujarat
sodium lauryl ether sulphate manufacturing process
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium dodecyl sulfate
ammonium lauryl sulfate
sodium lauryl sulfoacetate

sodium lauryl ether sulphate price
sodium lauryl ether sulfate uses
sodium lauryl ether sulfate harmful
sodium lauryl ether sulphate specification
sodium lauryl ether sulphate manufacturers in india
sodium lauryl sulphate manufacturers in india

SLES Sodium Lauryl Ether Sulphate exporter and supplier in South Africa, UAE Fujairah, Dubai, Ajman, Sharjah, Abudhabi, Muscat Barka Sohar, Oman, Mumbai, Kandla Gandhidham, Visakhaptnam, Chennai, Kolkata, Canada, Nairobi Kenya, Sudan Yemen

SLES sodium Lauryl Ether Sulphate developed in chemicals field to cover demand of personal care and home care products like Shampoo, Bubble Bath, Shower Gel, Face Wash, Dish Wash, Liquid Detergent and Hand Wash. SLES not only used in detergent and cosmetic industry but also popular in the printing and dyeing industry, petroleum and leather industry as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent.

SLES Paste 70 Percent

Dechlorination Solution De Hypo

Acts as a  chlorine reducing agent in RO units and for membranes preservation. Acts as Dechlorinating agent is a kind of rapid reaction, is used to remove the residual chlorine in the reverse osmosis water, suitable for all kinds of reverse osmosis membrane.

Alias: 

LC-35 De-chlorination, Nalco 77214 or 7408, Dremachem SC, Dechlorination Soln De Hypo 25 Ltrs

Application: 

Dechlorinating agent is a kind of rapid reaction, is used to remove the residual chlorine in the reverse osmosis water, suitable for all kinds of reverse osmosis membrane.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Physical and chemical properties

Color: colorless, transparent form: liquid

Bouquet: irritating sour odor specific gravity: 1.37 (25 °C)

PH (1%) : 4.1 crystallization temperature: 1.1 °C

Products use

Chlorine can concentrate or dilute dosing, each more than 1 PPM of chlorine need 3.66 7408 parts per million (PPM) to restore. Dosing quantity deficiency can lead to reverse osmosis membrane by residual chlorine oxidation.

Short Description: 
Dechlorinating agent is a kind of rapid reaction, is used to remove the residual chlorine in the reverse osmosis water, suitable for all kinds of reverse osmosis membrane.

#chlorineREMOVALliquid_MuscatDubaiSharjahOmanUAE
#DechlorinationSolution_ManufacturerSupplier
#DechlorinationSolutionDeHypo_WaterTreatmentChemicals

Dechlorination Soln De Hypo manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Dechlorination Soln De Hypo at a competitive price from us. We have ready stock of Dechlorination Soln De Hypo in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Chlorine Remover

Descaling Liquid

Alias: 

LIME-OUT, DESCALER MTA, DESCALE IT, DESCALER, DESCALER LIQUID 555, Phosphoric Descaler, Descaling Liq 50 Ltr

Active Matter: 
63-72
Application: 
Low Foaming Solution. Safely removes scale from cooling towers, pipes, Boilers, Calorifiers, Heat exchanges, diesel engine cooling system, Condensers, Evaporators & other types of equipment where rust & scale form without system shutdown
 
It Effectively Removes Scale, Heavy Slime and Algae from surface. RXSOL 555 is an inhibited phosphoric acid descaler which is much safer and non-fuming. Also  safe on paint.
Packing Size: 
20.00 Ltr.
Using Procedure: 

RXSOL-11-1008-020  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

The most effective method is circulation for large systems or components like boilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 5-40% of RXSOL-11-1008-020 in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  RXSOL-10-1005. RXSOL-11-1008-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-11-1008-020 ,  

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  RXSO-20-2005  in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

RXSOL-11-1008-020 should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used. Chemical Cleaning Module Rx cleansers has developed a 280 litres capacity cleaning module, primarily designed for use with chemical acid solvents for descaling boilers, calorifiers, heat exchangers & other types of equipment where rust & scale form RXSOL-11-1008-020 Boilers, See Rx cleansers Practical Application Manual

Note: 

 After using  RXSOL-11-1008-020, sense all metal surfaces with 0.5 percent of  RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc

 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL 1008 .
    RXSOL 1008  is safer for the employees to use than other acid products.
  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
  •  Cleans down to the original surface without pitting.
  •  RXSOL 1008 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL 1008  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.

India's largest scale claner manufacturer with multi location stock point. DESCALING Chemical manufacturer and supplier  in Kolkata, Mumbai, Surat, Gandhidham, Vizag, Chennai, Dubai, Fujairah...

Short Description: 
Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits
Information: 

 Scale remover chemical manufacturer, Exporter and supplier. 

Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits

LIME-OUT, DESCALER MTA, DESCALE IT, DESCALER, DESCALER LIQUID 555, Phosphoric Descaler, Descaling Liq 50 Ltr

Descaling Liquid manufacturer and supplier in Navi Mumbai MIDC, Mumbai, Nashik, Pune, Taloja MIDC, Rabale, Turbha, Pawana MIDC, Gandhidham, Kandla, Jamnagara, Mundra, Sikka, Surat, Hazira, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai Ennore, Goa, Manglore, Dubai, Sharjah, AbuDhabi, Ajman, Diera, UAE Middle East, Oman Muscat - Barka, Ruwi, Sudan, Yemen

34022090

Descaler

Ferric Chloride 40%

Packing Size: 
1400.00 Kg
Short Description: 
Ferric Chloride 40%

N-HYDROXYETHLENEDIAMINE TRIACETIC ACID TRISODIUM SALT

Alias: 

N-HYDROXYETHLENEDIAMINE TRIACETIC – ACID TRISODIUM SALT

Packing Size: 
25.00 Kg
Short Description: 
RO ANTISCALANT

N-HYDROXYETHLENEDIAMINE TRIACETIC ACID TRISODIUM SALT manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of N-HYDROXYETHLENEDIAMINE TRIACETIC ACID TRISODIUM SALT at a competitive price from us. We have ready stock of N-HYDROXYETHLENEDIAMINE TRIACETIC ACID TRISODIUM SALT in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

RO ANTISCALANT

RO Biocide DBN 20

Alias: 

Avista RoCide DB20, HYDREX 4202

Active Matter: 
90
Application: 

RO Biocide DBN 20  is used in RO applications as a biocide for intermittent use or as a membrane cleaner. For potable applications, refer to local regulations.

Compatibility with other water treatment chemicals and water conditions: RO Biocide DBN 20 is compatible with other treatment chemicals with the exception of mercaptobenzothiazole. It also is not compatible with ammonia or hydrogen sulfide-containing water. DBNPA maintains reliable control in systems running at acidic, neutral, or alkaline pH.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Biocide for Intermittent Use
Used as an on-line biocide for intermittent use, RO Biocid DBN 20  acts like a “shock treatment” to control fouling. The dose level and frequency should be optimized according to the bacteriological challenges present in the feedwater. A typical dose is 25-50 mg/l for one hour per week.
 

RO Membrane Cleaner
RO Biocide DBN 20   is normally applied as the first stage of cleaning using solutions of 50-200 mg/l depending on the degree of fouling. The solution is circulated through the membranes for 1-3 hours. Because RO Biocide DBN 20  is a fast-acting biocide, it should be added in batches of 50 mg/l four times during the circulation period.

Note: 

Future & Benefit  : 

  • Instantaneous antimicrobial activity as a non-oxidizing slimicide and bactericide.
  • Kills bacteria, fungi and algae.
  • Degrades rapidly and naturally to comply with strict environmental discharge regulations.
  • Compatible with polyamide and cellulose acetate membranes.
  • Can be used with other RXSOL cleaners.
Short Description: 
RO Biocid DBN 20 is a concentrated, fast-acting, non-oxidizing liquid biocide.

RO Biocide Reverse Osmosis Biocide manufacturer and supplier in Muscat - Oman, Fujairah, Dubai, sharjah, Abudhabi, Ajman, Diera, UAE Middle East, Mumbai, Navi Mumbai - MIDC, Taloja, Panvel _ MIDC, Gandhidham, Surat, Visakhapatnam, Chennai, Kolkata, Paradip, Varanashi, Patna, Ranchi, Tata, Munger

Biocide Disinfectant

stock-clearance.png