RO Chemicals-33

Antiscalant 9209 RX is specially designed to control the development of scale in seawater distillation plants. It is based on a synergistic blend of phosphonates which are found to be more effective than other polymers at controlling carbonate and sulphate scale formation in sea water distillation units .

Alias:

Hydrex 9209, Metito M 915, Genesys LF

Active Matter:

94-98

Application:

PREVENTS IRON FOULING and SILICA ANTISCALANT properties.

Convenient liquid formulation for automatic dosing using suitable dosing equipment.
Prevents formation of hard scale in seawater distillation units.
Performance surpasses other similar products.
Cost effective concentrate.
Effective at high temperatures.

Packing Size:

30.00 Kg.Liq

Using Procedure:

The correct dosage rate is dependant upon several parameters, including feed temperature, pH, and chemical analysis and will be specified by your consultant after a detailed survey of your plant. To obtain the best results, Antiscalant 9209 RX should be added continuously using a suitable metering pump.

In general PRACTICE :
Antiscalant 9209 RX should be dosed continuously to the feed water upstream of the cartridge filters. Typical dosage rates are 2 – 4 mg/L.
Antiscalant 9209 RX may also be used in sea water applications where iron is present, recycle of brine is in use or there is no feed water pH reduction by acid dosing.

Typical dose rates are 0.5 – 1.0 mg/L
Antiscalant 9209 RX dose rate in the feed water should be less than 5 mg/L in potable water systems.
Antiscalant 9209 RX can be diluted and is fully miscible with water in all proportions.

Note:

Antiscalant 9209 RX is an aqueous solution of neutralised phosphonic acid. It has been approved for use in potable water applications and does not contribute to assimilable organic carbon (AOC), which can act as source of nutrient for micro-organisms.

Related Products:

Antiscalant RO

RXSOL Altreat 400

Antiscalant ORG EV 2030

RXSOL Altreat 400

Antiscalant RXSOL ORG EV

Membrane Antiscalant ALKA 191T

Safety Accessories:

Antiscalant Antifoulant Corrosion Inhibitor 704

RO Antiscalant 2020 High Silica Inhibition

Article News:

Antiscalant supplier in Mumbai

How to improve Distilled Water quality

Antiscalant Supplier

Short Description:

Antiscalant for Water Distillation Units , specially designed to control the development of scale in seawater distillation plants.

ANTISCALANT 9209 RX seawater distillation plants, Compatible with all types of polyamide membrane
ANTISCALANT 9209 RX powerfully Inhibits common scales Calcium carbonate/sulphate - Calcium phosphate, Barium/Strontium sulphate - Silica, Iron/Manganese

#AntiScalant_ManufacturerSupplier
#Antiscalant_DubaiAbudhabiAjmanFujairah
#Antiscalant_MuscatSoharOman
#Antiscalant_MumbaiChennaiKolkataSuratGandhidhamVizag

RXSOL-51-6005-025 ANTISCALANT and Antifoulant for Reverse Osmosis and Nano Filtration unit.

ANTISCALANT 9209 RX FOR seawater distillation plants manufacturer and supplier in Fujairah, Muscat, Barka, Oman, Dubai, Sharjah, Abudhabi, UAE Middle East, Ajman, Mumbai, Kolkata, Kandla, Visakhapatnam, Chennai Surat, CANADA, Kenya Nairobi, Jinja Uganda

ANTISCALANT 9209 RX Seawater Distillation Plants RXSOL-51-6005-025 is Suitable for Reverse Osmosis (RO) and NanoFiltration (NF) membranes

✓ Effective at LSI up to +2.6

✓ Excellent inhibitor for iron fouling

✓ Excellent silica antiscalant

✓ NSF listed product

✓ Approved for use in drinking water applications (UKDWI)

✓ Compatible with all types of polyamide membrane

✓ Replaces acid addition

✓ Inhibits common scales

- Calcium carbonate/sulphate

- Calcium phosphate

- Barium/Strontium sulphate

- Silica

- Iron/Manganese

ANTISCALANT 9209 RX Seawater Distillation Plants RXSOL-51-6005-025 Inhibits Scale Formation, Prevents Iron Fouling

Broad Spectrum Antiscalant and Antifoulant Liquid

8580 reads

Cool Water Treat

Alias:

C.W.T. Inhibitor 9-111, COOL WATER TREAT NCL, Coolwater Treat, Cool water treat, Cool Treat, Corrosion Inhibitor for Cooling Water, CoolTreat 25 Ltr

Active Matter:

45-50

Application:

Cool Water Treat is a highly effective corrosion inhibitor for all common metals in cooling water systems. Testing has shown no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these systems. Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool Water Treat applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces. For new builds, RXSOL Ships Service recommends cleaning of the water system before commencing service. The system will always contain small amounts of oil and iron oxides, and this can be removed in one operation. If the system is corroded or is more heavily contaminated, degreasing scale is recommended. For systems previously treated with other products, RXSOL Ships Service recommend to drain and flush the system before refilling with distilled water and Cool Water Treat . The system should be clean and free from scale and corrosion products when starting the treatment. The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water treat can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Packing Size:

25.00 Ltr.

Using Procedure:

Cool Water Treat should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.

Dosing and Control

Initial dosage for an untreated system is 60 litres of Cool Water Treat Cool water Treat Corrosion Inhibitor / ton of untreated distilled water (6%). This will provide sufficient protection of the system for a period of two to five years under normal conditions. 6% Cool water Treat Corrosion Inhibitor should also be dosed in all make up water added to the system to compensate for lost coolant. The engine manufacturer's recommendations for water quality should always be complied with. Chloride levels should always be as low as possible. Most engine manufacturers recommend a maximum of 50 ppm chlorides. For this reason, RXSOL Service recommends the use of distilled water as make-up.

Note:

Liquid product, easy to use
Environmentally friendly, fully organic product, low toxicity
Effective against cavitation and erosion. Superior heat transfer properties
Compatible with hoses, gaskets and seals
Compatible with glycols for frost protection
Stable product-non depleting
The product can be used for corrosion inhibition in many types of closed re-circulation system cooling water systems
Approved by major engine manufacturers

Related Products:

ROCCOR NB Corrosion Scale Inhibitor Liquid

Air Cooler Scale Dissolver

Engine Guard NB Scale Inhibitor DEWT

Safety Accessories:

Coolant Extended Life RXSOL ELC

Metal Bright

ENGINE SCALE Guard NB

Short Description:

Cool water Treat Corrosion Inhibitor can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Cool Water Treat is specialized corrosion inhibitor for Cooling Water system.

#CorroSionInhibitor_CoolingSystem
#CoolingWaterTreatmentChemicals
#CWTinhbitor_ManufacturerSupplierIndiaUAEoman

Cool Water Treat corrosion inhibitor for cooling water system manufacturer and supplier in Mumbai, Navi Mumbai, Gandhidham, Hazira Surat, Chennai Ennore, Vizag Visakhapatnam, Kolkata Haldia, Buzbuz, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Muscat, Oman, Canada, Nairobi Kenya, Sudan, Yemen

Cooling Water Corrosion Inhibitor

Read more
6296 reads

Sodium Hydrosulphite Liquid

Sodium hydrosulfite Liquid solution, technical grade, 85%.Active Matter suitable for RO Plant.

Packing Size:

25.00 Kg.Liq

Related Products:

Sodium Sulphite

Short Description:

Sodium hydrosulfite, technical grade, 85%.Active Matter suitable for RO Plant

Sodium Hydrosulphite Liquid manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Sodium Hydrosulphite Liquid at a competitive price from us. We have ready stock of Sodium Hydrosulphite Liquid in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

8967 reads

RO Antiscalant 2020 High Silica Inhibition

RO Antiscalant 2020 Rx is a high performance non hazardous reverse osmosis (RO) antiscalant and dispersant, scientifically formulated for the treatment and protection of reverse osmosis membranes under high silica feed water conditions.A proprietary blend, RO Antiscalant 2020 Rx has been specifically designed for ro membrane systems with high silica feed-waters.

Alias:

Accepta 2091, Avista Vitec 4000, MAXTREAT 2350

Active Matter:

93-95

Application:

can be used in reverse osmosis applications where the reject brine silica levels are as high as 230 ppm at 30oC and pH 7.5. All membrane elements based on Polyamide
chemistries including Thin Film Composite (TFC)
membranes when used as directed Viton
304 Stainless Steel EPDM
Neoprene
Buna-N
Hypalon
Polyurethane
Polyethylene
Polypropylene
Plasite 4300
Plasite 7122

Packing Size:

25.00 Ltr.

Using Procedure:

INSTRUCTIONS FOR USE

Injecting : Best results are achieved when RO Antiscalant 2020 High Silica Inhibitionis injected downstream of multimedia filters and upstream of cartridge filters.

Dosing :

A typical RO Antiscalant 2020 High Silica Inhibition dose ranges from 2-5 mg/l. A site-specific dose can be determined using the Avista Advisor software program.

Dilution :

RO Antiscalant 2020 High Silica Inhibition is formulated to be injected neat. However, if dilution is required, use deionized water or RO permeate. If neither of these is available, softened water may be substituted. The dilution for RO Antiscalant 2020 High Silica Inhibition should not result in a solution strength of less than 10%. This guideline will protect the effectiveness of the internal bacteriostat, which inhibits bacterial growth in the product packaging and feed tank.

Use RO permeate for dilution.
Prepare a fresh antiscalant solution every 2-3 days.
Inspect the antiscalant day-tank before adding the new solution. If needed, the antiscalant tank should be cleaned prior to filling.
Dilution rates up to a factor 10 can be applied.

Note:

Product Benefits:

Highly efficient antiscalant and dispersant for reverse osmosis membrane systems
Designed for high silica feedwaters
Very effective antiscalant
Prevents low production and poor permeate quality
Prevents downtime and increased costs
Combats silica fouling
Is not deactivated in the presence of iron
Non Hazardous

Related Products:

Antiscalant RO

Membrane Antiscalant ALKA 191T

ORG MC 882 Membrane Cleaner

Hydrochloric Acid Conc Pure

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Short Description:

RO Antiscalant 2020 Rx is a liquid antiscalant and dispersant that offers excellent

RO Antiscalant 2020 High Silica Inhibition manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of RO Antiscalant 2020 High Silica Inhibition at a competitive price from us. We have ready stock of RO Antiscalant 2020 High Silica Inhibition in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Read more
2801 reads

Sodium Hypo Chlorite

Sodium Hypochlorite solution, Used for sterlizing water and swimming pool...This will - Remove odors. Remove Color. Improve permaganate time.

Alias:

Chloros, Bleach, Twin Oxide Compound A, Ipo chlor 16%, Ipochlor Bluetech, Sodium Hypo Chlorite 25 Ltr

Active Matter:

12-15

Application:

Also used as a disinfectant and germicide , especially in the sterilization of water.
It is also used for making wool unshrinkable and in the manufactire of chloroform.
For the purpose of disinfection and bleaching , a weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficientPotable Water Treatment
Aquatics and Pools
Odor Control/Corrosion Control
Food & Beverage Processing
Wastewater Treatment
Cooling Towers, Inland Power Stations & Industry
Irrigation Systems
Agriculture/Farming

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL: Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Packing Size:

25.00 Ltr.

Using Procedure:

6% Sodium Hypochlorite Solution. Disinfectant for use in drinking water. Use one drop of solution per 10 ltrs of drinking water, 600 ml of solution per 36 tons of drinking water.

General formulation to calculate how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration.

req'd residual in ppm
Volume of hypo = volume of water x ( ----------------------------- )
1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add ?

(5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

(5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

                                                                                                              req'd residual in PPM
Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )
                                                                                                               1,000,000 x hypo %

This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

(8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds

Note:

Spraying - Following rough washing to a good Water White or better, apply dilute Bleach to 1 - 3% strength. First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.

Injection -no.

Re-circulation - Following rough washing to a good Water White standard or better, apply dilute Bleach to 1-3% strength. Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 - 500C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-850 C after 45 minutes. Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.

** When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between tanks as required.

* Use a strainer at the pump stack when circulating any solution.
Tank Lining - Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).

**These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.

Related Products:

Chlorine Tablets Calcium Based

Chlorine Tabs POWERFUL (3 Inch Jumbo Size)

Chlorine Liquid

Chlorine Scavenger

Sodium Thiosulfate Pentahydrate

Sodium Bisulphite Solution

Sodium Meta Silicate

Bleaching Liquid

WHITEX Bleach Liq

TPOL 20 Ltr BUCKET

Hand Cleaner Paste, Waterless 1 Kg Pkg

Dish Wash 500 ml

Toilet Cleaner-500 ml

Safety Accessories:

Hand Gloves Chemical resistance

RESPIRATORY PROTECTION HALF MASKS

Goggle

PVC Chemical Resistance Boot

Short Description:

Extra pure LAB TESTED Clear greenish-yellow liquid miscible in any proportion with water.

Sodium Hypochlorite manufacturer and supplier in Barka, Muscat, Sohar, Oman, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, UAE Middle East, Sudan, Yemen, Nairobi Kenya Africa, Mumbai, Kolkata, Chennai, Visakhapatnam, Gandhidham, Kandla Mundra, Surat Hazira, Gujrat, Navi Mumbai MIDC

Note : Store in cool place

UN No : 1791
IMDG CLASS : 8

PACKING GROUP : III

ODOUR : IRRITATING, PUNGENT ODOUR

R31: Contact with acids liberates toxic gases

R34: Causes burns

S-PHRASES

S1/2: Keep locked up and out of the reach of children.

S28: After contact with skin, wash immediately with plenty of water

S45: In case of accident or if you feel unwell, seek medical advice (show the label where possible)

S50: Do not mix with acids

S50: Do not mix with reducing agents

X2: Restricted to professional users.Warning! Avoid exposure - obtain special instructions before use.

EMERGENCY AND FIRST AID PROCEDURES

EYE:

OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.

SKIN:

SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.

INIIALATION:

Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION:

NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material

Other Related PRODUCTS LINKS :

Textile Hypo Bleach , SODIUM HYPO CHLORITE , Sod Hypo Chlorite conc activeCHLORINE , CHLORINE LIQUID , Calcium Hypo Chlorite Conc active Chlorine , Chlorine Tablet cyanurate , Chlorine Tablets Calcium Based , DYE REMOVER ORG DICHLOR , Dechlorination Soln De-Hypo

Chlorine Alkaline Water

9863 reads

POLYETHYLENE GLYCOL 4000

Packing Size:

220.00 Kg

Short Description:

POLYETHYLENE GLYCOL 4000

23 reads

Sulphuric Acid Conc

Packing Size:

1800.00 Kg.Liq

Short Description:

RO maintenance chemical

29 reads

Search

RO Chemicals-33