Gasses-66

Scale Inhibitor 4300 High Polymer

Alias:

Acumer 4300 Scale Inhibitor, Hardness Stabilizer 220 Kg Liquid packing

Active Matter:

81-90

Application:

Mechanism of Action

Maleic polymers are known to be excellent calcium carbonate inhibitors and crystal modifiers but many exhibit only fair calcium sulfate deposit control. A new polymer, Scale Inhibitor 4300 Rx, has been developed to overcome this problem. Scale Inhibitor 4300 Rx contains maleic polymer and a unique combination of other functionalities to provide both superior calcium carbonate and calcium sulfate inhibition, also outperforming HEDP. Preventing calcium sulfate scale is important in water systems treated with sulfuric acid for pH control or if using seawater or briny waters. Also removing sulfur oxide gases in scrubbing systems can result in sulfur containing calcium deposits.

Scale Inhibitor 4300 Rx polymer inhibits scale buildup on surfaces through at least three mechanisms:

Solubility enhancement or threshold effect, which reduces precipitation of low solubility inorganic salts.
Crystal modification, which deforms the growing inorganic salt crystals to give small, irregular, readily fractured crystal that do not adhere well to surfaces.
Dispersing activity, which prevents precipitated crystals or other inorganic particles from agglomerating and depositing on surfaces.

Packing Size:

220.00 Kg.Liq

Using Procedure:

Performance Advantages with Scale Inhibitor 4300 RX Polymer Scale Inhibitor

The following tables compare the product efficacy of Scale Inhibitor 4300 Rx polymer with other scale control agents for inhibiting calcium salts and dispersing solids. The higher the performance value (% inhibition or NTU), the better the scale inhibitor and dispersant. Test conditions represent various salt levels found in cycled cooling water.

Calcium Carbonate Inhibition :

Polymers were tested for preventing the precipitation of calcium carbonate under highly stressed conditions. The "High Salt" conditions used for these evaluations contain chloride levels typical of seawater or very briny waters. The "High Calcium" conditions contain calcium and carbonate levels typical of highly cycled cooling water. In Table 1, Scale Inhibitor 4300 Rx provided excellent performance for inhibiting calcium carbonate under both test conditions. Scale Inhibitor 4300 Rx , HEDP and polymaleic acid were the best inhibitors in the "High Salt" test while Scale Inhibitor 4300 Rx and pAA were the best inhibitors in the "High Calcium" test. Note that a competitive polymer, V1, performed poorly in
the "High Salt" test for inhibiting calcium carbonate.

Table 1 - Scale Inhibitor 4300 Rx- Calcium Carbonate Scale Inhibitor

Additive	MW	% CaCO3 Inhibition - High Salt	% CaCO3 Inhibition -High Calcium
Scale Inhibitor 4300 Rx	2000	84	96
HEDP	206	86	90
Polymaleic Acid	750	86	82
Polyacrylic Acid	2000	10	96
Polyacrylic Acid	4000	8	95
AA/Sulfonate Copolymer	4500	6	85
Competitive Polymer V1	6700	10	Not Tested
None	----	3	63

CaCO3 Inhibition (%) (High Salt): 20 ppm polymer solids/200 ppm Ca+2 as CaCO3/3500 ppm

M-Alkalinity as CaCO3/30,000 ppm NaCl/pH 9/38°C/20 hours.

CaCO3 Inhibition (%) (High Calcium): 10 ppm polymer solids/600 ppm Ca+2 as CaCO3/300 ppm Mg+2 as CaCO3/600 ppm

M-Alkalinity/pH 9/54°C/20 hours.

Calcium Sulfate Inhibition :

Scale Inhibitor 4300 RX is also an excellent calcium sulfate inhibitor as demonstrated in Table 2. Many conditions were evaluated at different temperatures, pH and polymer levels. Scale Inhibitor 4300 RX provided excellent performance similar to pAA in the longer term tests but was the best performer for inhibiting calcium sulfate in once-thru conditions where induction time is under an hour. Scale Inhibitor 4300 RX excelled over polymaleic acid and HEDP for inhibiting calcium sulfate.

Related Products:

Hardness Phosphate Control

Hardness Control Liquid

Short Description:

Scale Inhibitor 4300 Rx is a high performance polymer based scale inhibitor.

Scale Inhibitor 4300 High Polymer supplier in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Sharjah, Dubai, Ajman, Abudhabi, UAE, Ruwi, Barka, Muscat Oman, Yemen, Sudan, Canada

HARDNESS STABILIZER- POC 3000

Read more
2192 reads

ERIOCHROME BLACK T INDICATOR Solution

ERIOCHROME BLACK T ACS GRADE excellent quality manufacturer, exporter and supplier. Eriochrome Black T, Reagent, ACS, also known as Solochrome Black T, is a complexometric indicator used as an indicator in EDTA titration. As an ACS grade quality reagent, its chemical specifications are the de facto standards for chemicals used in many high-purity applications and typically designate the highest quality chemical available for laboratory use.

Alias:

EBT, ERIOCHROME BLACK T ACS GRADE, Indicator for EDTA titration, Solochrome Black T

Application:

Eriochrome black T is used as an indicator in analytical chemistry.
It is also used in the detection of rare earth metals. It finds application in dyeing and printing of wool fabric, dyeing of silk and nylon as well as in leather dyeing. It can be used in the spectrophotometric determination of diphenhydramine hydrochloride in pharmaceutical preparations.

As a complexometric indicator, it is useful in the determination of hardness of water.

Packing Size:

1.00 Bottle PWD

Using Procedure:

Metal Titration Indicator
Water Hardness Determination process. It is an azo dye.
Black Stains and Dyes and Indicators

Note:

Synonym :- 3-Hydroxy-4-(1-hydroxy-2-naphthylazo)-7-nitro-1-naphthalene sulfonic acid, sodium salt

Suitability :- Passes (for complexometric determination of metals)

Color :- Brownish-black to black

Grade :- Pure

Physical Form :-Powder

Formula Weight:- 461.38

Infrared Spectrum:- Authentic

Solubility in water: slightly soluble

Related Products:

AZURE A

BROMOPHENOL BLUE SODIUM SALT ACS GRADE

Phenolphthalein Indicator

Nitrite Test Kit

Safety Accessories:

Hand Gloves Chemical resistance

Goggle Chemical Protective

Article News:

Water hardness determination

Short Description:

Eriochrome Black T complexometric metal indicator solution

Eriochrome Black T is a complexometric indicator. During titrations of water hardness determination process. Eriochrome Black T is BLUE in colour but in the presence of calcium, magnesium, or other metal ions It turns RED.

Eriochrome Black T or EBT plays colour changing role in between 6.3 to 11.5, and with RED as its acidic colour and ORANGE its basic color.

Stability: :Stable. Incompatible with strong oxidizing agents, strong reducing agents.

Eriochrome Black T, Reagent, ACS is complexometric indicator also known as Solochrome Black T. Most popular to used as an indicator in EDTA titration. Also used in many high-purity applications and typically designate the highest quality chemical available for laboratory use.
Spectrum Chemical manufactured Reagent ACS grade products meet the toughest regulatory standards for quality and purity.

ERIOCHROME BLACK T INDICATOR Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of ERIOCHROME BLACK T INDICATOR Solution at a competitive price from us. We have ready stock of ERIOCHROME BLACK T INDICATOR Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Eriochrome Black T or EBT metal indicator

9561 reads

Potassium Chloride Fire Extinguisher

High Purity Potassium chloride used as a fire extinguishing agent, used in portable and wheeled fire extinguishers. Known as Super-K dry chemical, Potassium chloride is metal halide salt resulting more effective than sodium bicarbonate-based dry chemicals and was compatible with protein foam.

Alias:

Potassium Chloride

Active Matter:

Application:

Other names	Sylvite common name Muriate of potash Potassium Chloride
Identifiers
CAS number	[7447-40-7]
RTECS number	TS8050000
ChemSpiderID	4707
Properties
Molecular formula	KCl
Molar mass	74.55 g/mol
Appearance	white crystalline solid
Density	1.987 g/cm3
Melting point	775 °C
Boiling point	ca. 1500 °C
Solubilityin water	28.1 g/100 ml (0 °C) 34.0 g/100 ml (20 °C) 56.7 g/100 ml (100 °C);
Hazards
MSDS	ICSC 1450
EU Index	Not listed
Flash point	Non-flammable
LD50	2600 mg/kg (oral/rat), 142 mg/kg (intravenous/rat)

Packing Size:

50.00 Kg.PWD

Using Procedure:

Along with sodium chloride and lithium chloride, potassium chloride is used as a flux for the gas welding of aluminium.

Note:

Potassium chloride is rated for B and C fires as Fire Extinguisher

Related Products:

Sodium Nitrite

AMMONIUM Bifluoride Crystal

Video Links:

KCl Potassium Chloride Exporter India UAE Oman Kenya

Short Description:

Potassium Chloride Exporter, Manufacturer

We are the one of the leading manufacturers and suppliers Potassium Chloride Crystals. Processed in a clean and hygienic medicinal environment, these crystals are highly effective. In addition to this. Owing to their enhanced shelf life, these products can be stored for a long time.

Features:

Compositional accuracy

Longer shelf life

Precise pH range

Compositions:

Purity: 99%

Presence: White Crystalline powder

Potassium Chloride is a salt of metal halide that combines potassium and chlorine. Featuring the formula KCl, this salt is odourless in nature and can be distinguished by its white and sometimes colourless vitreous crystal-like appearance.
The salt readily dissolves in water without leaving a residue

Features:

Inexpensive as compared to other salts

Produced and processed as per approved technology

Sold at economical prices

Packed in good quality boxes and containers

Potassium Chloride finds numerous uses, especially in the field of Agriculture, Medicine, Radiation, food & beverages, and more. Another well-known use of this salt is as a fire extinguisher.

We are major exporter of Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

K Dry chemical

2942 reads

OXYGEN CLEANER

Most suitable product for oxygen cleaning and degreasing operations. Oxygen Cleaner is highly concentrated product which can be diluted with water before use.

Active Matter:

48-50

Packing Size:

210.00 Ltr.

Using Procedure:

Oxygen cleaner mostely use after 25% DILUTION with water solution. But for general use its uses is economical 1 g/L can be used.

Fast, intense cleaning action surpasses other cleaners' performances Leaves cleaned surfaces slightly antistatic

Note:

The most advantage of RXSOL brand Oxygen Cleaner is this product is Non-toxic, Non-flammable Contains no phosphates, acids, silicones and is non-butyl. Due to that this product is Safe to use on all kinds of metals and plastics Biodegradable Easily removes oil, grease and dirt from surfaces Splits oils rather then emulsifying them, allowing the oils to be removed and the cleaner re-used.

Related Products:

Oxygen Controller Scavenger

Oxygen Gas Cylinder

Oxygen Treat Scavanger PWD 25 Kg

Short Description:

Most suitable product for oxygen cleaning and degreasing operations. Oxygen Cleaner is highly concentrated product which can be diluted with water before use.

The chemical reactions that take place when using RXSOL Oxygen Cleaner completely disintegrate these linear carbon chains. Both allowing TRAMOS Oxygen Cleaner to work very efficiently at low temperatures. T This pH allows RXSOL Oxygen Cleaner to clean solid washable surfaces without marring the substrate. The buffering of this product allows it to have a , as used.

Oxygen Cleaner Manufacturer and supplier in Kolkata, Mumbai, Chennai, Gandhidham, Visakhapatnam, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat Oman, Kennya, Mombasa, Nairobi Uganda

Oxygen cleaner and degreaser

3111 reads

Potassium Permanganate Impregnated Alumina

Impregnated Activated Alumina with potassium permanganate KMNO4. This is highly porous material this material can have a surface area significantly over 200 square metres/g. High quality High crush strength power, which limits dusting, is important during loading of desiccant towers. High crush strength makes alumina effective as a prebed material when used with other types of desiccants.

Application:

Potassium Permanganate Impregnated Alumina has strong oxidizing property with Potassium Permanganate (KMnO4), it has good efficienty in removing Hydrogen Sulfide(H2S) , Chlorine(Cl2), Formaldehyde(HCHO), Nitric Oxide (NO) & Sulfur Dioxide(SO2) from air.

Packing Size:

25.00 Kg

Using Procedure:

Drier Chemicals manufacturer, importer and exporter of industrial chemicals and desiccants such as silica gel, activated alumina, activated carbon and carbon molecular sieves etc. High adsorption capacity. With high surface area and excellent pore distribution, Activated Alumina Desiccants has a high water adsorption capacity. This reduces initial cost, energy consumption and operating costs through smaller bed sizes and/or longer operating cycles.

Note:

Removal of hydrogen sulfide (H2S), sulfur dioxide (SO2), nitric oxide (NO), and formaldehyde (CH2O) becomes easy with Potassium Permanganate Impregnated Alumina. This media is formed from a combination of activated alumina and other binders, impregnated with potassium permanganate, providing excellent optimum adsorption, absorption, and oxidation of a wide variety of gaseous contaminants.

Related Products:

Potassium Permanganate Crystals

DI Ethanol Amine

Activated Alumina Desiccants

Activated Carbon for H2S Adsorption

MetaSorb Activated Carbon

Short Description:

45.36 kg of RXSOL-24-1905-025 media will remove a minimum of 8 pounds (3.62 kg) of hydrogen sulfide.

Information:

Potassium Permanganate Impregnated Alumina Manufacturer, Supplier and Exporter from India to Middle East. We are keeping ready stock of materials Potassium Permanganate Impregnated Alumina at Kandla - Mumbai, Kolkata - Haldia, Visakhapatnam - Gangavaram, Chennai - Ennore, Fujairah - Dubai - UAE. Share your private labeling and export inquiry with us to get most discounted price.

International quality product of activated alumina customized as per your specifications. Our skilled quality control supervisors monitor the entire manufacturing process to ensure production of International Quality chemicals.

Uniform bead sizes Potassium Permanganate Impregnated Alumina is a uniformly sized bead. It provides low pressure drop to minimize channeling and ensures utilization of the full bed column section.

Potassium Permanganate Impregnated Alumina manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Potassium Permanganate Impregnated Alumina at a competitive price from us. We have ready stock of Potassium Permanganate Impregnated Alumina in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Activated alumina impregnated with potassium permanganate

5236 reads

Leak Tester CO2 Cylinders

Leak Testing reagent for CO2 Cylinders leak test. On Leak detection deep pink colour of reagent changes into colourless. CO2 Gas Leak Detector manufacturers, suppliers and exporters.

Alias:

Leak Testing of CO2 Cylinders, Carbon Dioxide Leak Test Kit

Application:

Leak Testing of CO2 Cylinders Testing Method :::

Required Materials :::

1) Transparent Polythene bags of a suitable size to fit over the head of the cylinder. For eg. for 5.5" diameter cylinder the bag size is approximately:- 9" open width x 12" length. And For a 4" diameter cylinder, bag size is approximately 6.5" open width x 12" length. And For a 3.5" diameter cylinder, bag size is approximately 5.75" open width x 12" length.

2) Elastic bands of a suitable size to tighten Polythene Bag on Cylinder Head to Make sure there are no air gaps in the seal.

3) A measuring cylinder, 25 ml capacity.

4) Test Solution - RXSOL-66-6201-500, The solution shall be stored in a cool place in dark coloured glass bottles with a tight fitting screw cap. If so stored the shelf life is approximately 12 MONTHS.

Packing Size:

1.00 Bottle

Using Procedure:

Testing Method :
First of all clean valve and shoulder of the cylinder to make sure connecting portion are free from dust and other contaminants by carefully wiping using a clean, dry cloth. Remove the dust cap to clean the valve then replace the cap loosely.

Then Lay down the cylinder under test on its side in a rack, such that the valve end is protruding.

Testing procedure begin with by Using measuring cylinder to take 25 ml of the RXSOL-66-6201-500 test solution into a polythene bag, Pl. be note A control quantities of sample is necessary, which is made by introducing 25 ml of test solution. Then follow these step :::

1) Attach the open end of the bag over the valve head and attach it to the cylinder body. Tighten Polythene bags using one or more elastic bands. Make sure there are no air gaps in the seal. And also try to hang polythene bag minimum 20 cm off the valve end of the cylinder with the test solution in one corner.

2) Maintain the test for a period of not less than 4 hours and not more than 4.5 hours.

Final Observations

1) The presence of a leak of carbon dioxide from the cylinder will cause the pink colour to the test solution to be lost and the test solution will become water white.

2) If no colour change is observed there is no leak of gas from cylinder.

Related Products:

CO2 absorber

Short Description:

Leak Testing reagent for CO2 Cylinders leak test. On Leak detection deep pink colour of reagent changes into colourless.

Leak Tester CO2 Cylinders test kit manufacturer and supplier in Mumbai, Kandla, Fujairah, Sharjah, Ajman, Abudhabi, Dubai, UAE Middle East, Muscat, Barka Sohar Oman, Yemen, Nairobi, Kenya Africa, Canada, Kolkata, Surat Gandhidham Gujrat, Chennai, Visakhapatnam

Carbon Dioxide Leak detection test Kit

4658 reads

Redkleen RX 400 Radiator Flush Cleaner

Alias:

Nulon R 40, Reedkleen RX400 Radiator flush and clean

Application:

Use Redkleen RX 400 ( Radiator Flush & Clean) as a complete cooling system flush to remove insulating built-up sludge and residue before changing coolant in any cooling system. This procedure will ensure optimum heat transfer and efficiency of the entire cooling system. Whenever draining a cooling system or changing brands of coolant it is always recommended to clean the system with Redkleen RX 400.

Use Redkleen RX 400 before removing a radiator from a vehicle for reconditioning. Clean the entire system with Redkleen RX 400 so when the radiator is reinstalled, the core will not be contaminated with scale and residue from the rest of the system.

Packing Size:

25.00 Ltr.

Using Procedure:

Directions for use
Note: Exercise caution when removing radiator caps. Release pressure slowly to avoid scalding.

Turn on the heater and add required amount of RX 400 to a warm radiator.
Run the engine for 20 minutes minimum (no longer than 1 hour). Stop the engine and allow it to cool.
Drain the system by removing the bottom radiator hose or opening the drain cock. Thoroughly flush and rinse out all old coolant. Replace the hose or close the drain cock.
Add RXSOL 4001 corrosion inhibitor and clean, soft or demineralised water, or
Where specified, use anti-freeze/anti-boil coolant (such as RXSOL-4004 ultra Coolant).
Start the engine, check for leaks and top up as necessary.

Dose Rates

All cars and light commercials - add 500 ml
For trucks, tractors and large engines - add 500 ml for every 6 litres (quarts) of cooling system capacity.

Note:

Future & Benefit :

Cleans fast in 20 minutes
Reduces overheating
Safe to use with all coolant types
No pre-mixing
Neutralises harmful acids
Reduces mineral scale and sludge
Liquid easy to use and handle.

Packing : 1, 4, 20 25 Ltrs, 210 Ltrs.

Storage and Handling :

Keep container dry. In case of insufficient ventilation, wear suitable respiratory equipment. If you feel unwell, seek medical attention and show the label when possible. Avoid contact with skin and eyes. Keep away from incompatibles such as metals, acids.

Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.

Related Products:

ACC9 Air Cooler Chemical

Carbon Remover Cleaner HD

Turbine Condenser Cleaner

Safety Accessories:

Metal Clean Bright HD

Filter Cleaner Engine Oil

Article News:

Hand Cream supplier in Kurla Mumbai

Short Description:

Redkleen RX 400 ( Radiator Flush & Clean) is a non-acidic radiator and cooling system cleaner that effectively cleans in one simple 20-minute operation

Redkleen RX 400 Radiator Flush & Cleaner Manufacturer and supplier in Mumbai, Surat HAZIRA, Gandhidham Kandla Gujrat, Chennai, Visakhapatnam, Kolkata, Paradip, Sudan, Nairobi, Kenya, Muscat, Barka, Ruwi, Oman, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, UAE Gulf, Yemen

Radiator Maintenance chemicals and Radiator Coolant Manufacturer and Supplier :

Radiator Coolant 20% Conc. ::: Part No.- RXSOL-40-4045-025
Suitable to add to the cooling water of internal combustion engines for excellent protection against cavitation and corrosion to all metals and alloys that are used in cooling systems.It is especially appropiate for the use in heavy-duty engines such as those used in trucks, ships and lokomotives.

Coolant Green RXSOL G 93-94 ::: inhibitor concentrate/chemical which is added to the cooling water of internal combustion engines in cases in which the coolant does not need to be protected from freezing. It efforts excellent protection against cavitation and corrosion to all metals Part No.- RXSOL-40-4021-025

Coolant 25 Ltrs ::: Useful in preventing cavitation corrosion in high speed coolant pumps having aluminum housing and impellers. This could aid service life. Part No.- RXSOL-40-4004-025

Coolant Premix Redcool ::: premix coolant which reduces cavitation in areas such as the water pump and surface cavitation in hot spots of the cylinder head. The minimisation of cavitation erosion and pitting of heat rejecting aluminium surfaces (eg. behind exhaust ports) Part No.- RXSOL-40-4043-025

Radiator Condensor Scale Controler:::

Condensor Dispersant Scale Controler (For Radiators, DG - sets, Closed Cooling System) , Specially formulated for SCALE CONTROL . The stable oxide film that is formed by RXSOL-40-4007-020 prevents corrosion caused by electrolytic action between dissimilar metals used in the system. RXSOL-40-4007-020 has been field tested and found to have no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in the systems. Part No. RXSOL-40-4007-020

Radiator Cleaner ::: This is specially formulated for use as radiator cleaner. Radiator cleaner removes the dirt, grease, scale, grime & solder from the engine cooling system. Radiator cleaner is a powerful cleaning agent not only for the automobile engine but can be used for the steam tube and boiler tube etc. Part No.- RXSOL-16-2697-025

Engine Water Treatment DEWT ::: Multi-functional corrosion inhibitor for protecting recirculating cooling and heating water systems. RXSOL LIQUID EWT treatment is an excellent treatment for diesel engine primary and secondary cooling water. It is also ideally suited for use in chilled water systems because it forms a clear, non-staining solution, which protects the system from corrosion and hard water scale. Part No.- RXSOL-40-4010-025

Engine Parts Washing Solvent ( RXSOL - PWS ) ::: This product provides an economical and effective method for cleaning metal parts while being gentle on the hands. Grease, oil, dirt, sludge, grime, ink, light carbon and similar soils are dissolved with minimal soaking and brushing. Machine shops, garages, factories, industrial repair shops and automobile make-ready facilities will find this product to be an ideal compound for use in their recirculating parts washer units. Part No. RXSOL-10-1727-025

Carbon Remover ::: Concentrated RXSOL-16-1003-025 is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder etc.. Part No.- RXSOL-16-1003-025

Hand Cleaner Paste, Waterless ::: It is a milky white creamy gel containing natural ingredients, moisturisers, surfactants, and powerful dispersing agents. This is a batter substitute to petroleum products & caustic based detergetns which drain the body oil. ONLY 2 TO 5 grams SUFFICIENT tRXSOL-16-1001-001

Email us to get best discounted price for Radiator coolant and Cleaner in India - UAE Middle East - Oman : mail@rxmarine.com

Radiaator Flush Cleaner

Read more
5883 reads

Refrigerant R 404A

Refrigerant Freon R 404A (HP62) has been the long-standing HFC replacement for R-502 and R-22 in refrigeration applications. Refrigerant Gas R404A is also suitable for Medium and low temperature commercial and industrial direct expansion refrigeration and ice machines.

A synthetic HFC refrigerant which is harmless to the ozone layer. The gas is used in a variety of maritime refrigeration applications such as low and medium temperature applications (evaporating temperatures of -45 to +8° C).

Alias:

Unicool R 404 a, Freon Refrigerant R 404A

Application:

Good replacement of R-22 & R-502 refrigerant. Refrigerant Gas R404A vapors have Similar PT and flow properties to R-502 Higher capacity than R-22, therefore requires TXV change

Refrigerant Gas R404A is best suitable for new Commercial refrigeration equipment as well as R 404A can be use as replacement of existing R-502 equipment.

Packing Size:

1.00 Cylinder

Using Procedure:

Refrigerant Gas R404A is Compatible with polyolester lubricant.

R404A is a blend of HFC refrigerants commonly used for medium and low temperature refrigeration applications. It’s composition comprises: HFC-125 (44%), HFC-143a (52%), HFC-134a (4%).

Note:

Future :

All refillable cylinders are inspected prior to refilling.
Residue refrigerant recovered to prevent environmental damage.
Content is 100% genuine virgin refrigerant from approved producer.
Conforms to ARI-700 purity standard.
A replacement option for R-502 and R-22.
Most suitable for new systems.

Benefits

Worldwide compliance.
Assured quality.
Refillable cylinders.

Related Products:

Refrigerant Gas 22 BOTTLE

Refrigerants HFC R407C

Refrigerant R410a

Refrigerant R417a

Oxygen Gas Cylinder

Acetylene Gas Cylinder

Short Description:

Refrigerant R 404A manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Refrigerant R 404A at a competitive price from us. We have ready stock of Refrigerant R 404A in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Gasses-66

5556 reads

Refrigerants HFC R407C

A synthetic HFC refrigerant which is harmless to the ozone layer. The gas is used in a variety of maritime refrigeration applications such as high and medium temperature applications (evaporating temperatures of -25 to +15° C).

R407C is a blend of HFC refrigerants designed to replace R22 in air conditioning applications. It's composition comprises: HFC-32 (23%), HFC-125 (25%), HFC-134a (52%).

Alias:

Unicool R 407, Freon HFC refrigerants R407C

Application:

Many manufactures designed equipment to suit this refrigerant. It is non toxic and non flammable meeting the highest A1/A1 classification.

ODP = 0

GWP = 1526

Oil = POE

Industrial Refrigeration

Commercial Refrigeration

Commercial Air Conditioning

Domestic Air Conditioning

Packing Size:

1.00 Cylinder

Using Procedure:

Positive displacement equipment:
- new or existing residential and commercial air-conditioners
- new or existing residential and commercial heat pumps
Existing medium-temperature applications

Note:

Features

All refillable cylinders are inspected prior to refilling.
Residue refrigerant recovered to prevent environmental damage.
Content is 100% genuine refrigerant from approved producer.
Conforms to ARI-700 purity standard.
Suitable for new systems and retrofits.

Benefits

Worldwide compliance
Assured quality
Refillable cylinders

Related Products:

Refrigerant R417a

Refrigerant R 404A

Short Description:

Freon 407C is an HFC refrigerant replacement for R-22 in positive displacement systems such as new or existing residential and commercial air-conditioners and heat pumps.

Refrigerants HFC R407C manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Refrigerants HFC R407C at a competitive price from us. We have ready stock of Refrigerants HFC R407C in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Gasses-66

5148 reads

Refrigerant R410a

Freon 410A is the leading HFC refrigerant for replacing R-22 in positive displacement residential and light commercial air-conditioning and heat pump systems. It has higher cooling capacity and significantly higher pressure than R-22 and should be used only in systems specifically designed for R-410A A Synthetic HFC refrigerant which is harmless to the ozone layer.

Alias:

Unicool R 410 A, Freon Refrigerant R410a

Application:

The gas is used in a variety of maritime refrigeration applications such as low, medium and high temperature applications (evaporating temperatures of -45 to +8° C). It is also used for New residential and commercial air conditioning and heat pumps.

Packing Size:

1.00 Cylinder

Note:

Features

All refillable cylinders are inspected prior to refilling.
Residue refrigerant recovered to prevent environmental damage.
Content is 100% genuine refrigerant from approved producer.
Conforms to ARI-700 purity standard.
For new systems only

Benefits

Worldwide compliance
Assured quality
Refillable cylinders

Related Products:

Refrigerant R417a

Refrigerant R 404A

Short Description:

Freon 410A is the leading HFC refrigerant for replacing R-22 in positive displacement residential and light commercial air-conditioning and heat pump systems.

Refrigerant R410a manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Refrigerant R410a at a competitive price from us. We have ready stock of Refrigerant R410a in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Gasses-66

5329 reads

Search

Gasses-66