Stains Indicator Reagents-69

Sodium Hypo Chlorite 12-15%

Alias: 

Chloros, Bleach, Fungicide and an Oxidizing Bleach, Twin Oxide Compound A, CAS No:7681-52-9, NaClO, Sodium Hypo Chlorite 12-15% 250 Kg

Active Matter: 
<p> 12 - 15%</p>
Application: 
  • Also used as a disinfectant and germicide , especially in the sterilization of water.

  • It is also used for making wool unshrinkable and in the manufactire of chloroform.

  • For the purpose of disinfection and bleaching  , a weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficientPotable Water Treatment

  • Aquatics and Pools

  • Odor Control/Corrosion Control

  • Food & Beverage Processing

  • Wastewater Treatment

  • Cooling Towers, Inland Power Stations & Industry

  • Irrigation Systems

  • Agriculture/Farming
     

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL:  Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Packing Size: 
250.00 Kg.Liq
Using Procedure: 

A weak soln. ( 1.2 % ) is used. For purifying water
0.02 to 0 .2 % volumetric is sufficient for Potable Water Treatment

SODIUM HYPOCHLORITE

ACTIVE INGREDIENT:

            Sodium Hypochlorite as Chlorine                           : 15%

            Sodium Hydroxide                                                  :   1%

INERT INGREDIENTS:                                                      : 84%

             Total                                                                         100%           

 

General formulation to calculate  how much bleach is needed to add to a tank or a pipeline to disinfect it to a given chlorine residual using a given disinfectant. Usually someone wants to know how to meet an AWWA Standard (like C651-92, Disinfection of Water Mains). The equation below should be used to estimate the amount of sodium / Calcium hypochlorite (Chlorine Water is 6.00% sodium hypochlorite) needed to disinfect a given quantity of water to a desired chlorine concentration. 

                                                                        req'd residual in ppm
  Valume of hypo  =  volume of water  x  (  ----------------------------- )
                                                                           1,000,000 x hypo %

For example , say you had installed a new 5,000 gallon tank and wanted to make sure that you had at least a 100 ppm solution of chlorine in it.

How much 6.00% Hypochlorite would you need to add  ?

  • (5,000 gal x 100 ppm) / (1,000,000 x .06) = 8.33 gallons

How much 12% Hypochlorite solution would you need ?

  • (5,000 gal x 100 ppm) / (1,000,000 x .12) = 4.17 gallons

If you use calcium hypochlorite (the white, powder version of chlorine, like HTH pool cleaner), the equation becomes:

                                                                                                              req'd residual in PPM
Wgt. of Calcium Hypo (lbs)= gal of water x 8.33 lb / gal m x   ( ----------------------------- )
                                                                                                               1,000,000 x hypo %

  • This is simply the previous equation multiplied by the conversion factor of 8.33 pounds per gallon of water.

Let's assume that we still need to disinfect 5,000 gallons at 100 ppm.

How many pounds of 65% calcium hypochlorite (HTH pool cleaner) are needed?

  • (8.33 lbs/ gal. x 5,000 gal x 100 ppm) / (1,000,000 x .65) = 6.4 pounds
Note: 

High-test hypochlorite (HTH) is sold for chlorination of swimming pools and contains approximately 30% calcium hypochlorite. The crystalline salt is also sold for the same use; this salt usually contains less than 50% of calcium hypochlorite. However, the level of active chlorine may be much higher.

Note : Store in cool place

UN No :  1791
IMDG CLASS : 8

PACKING GROUP : III

ODOUR  : IRRITATING , PUNGENT ODOUR

R31: Contact with acids liberates toxic gases

R34: Causes burns

S-PHRASES

S1/2: Keep locked up and out of the reach of children.

S28: After contact with skin, wash immediately with plenty of water

S45: In case of accident or if you feel unwell, seek  medical advice (show the label where possible)

S50: Do not mix with acids

S50: Do not mix with reducing agents

X2: Restricted to professional users.Warning! Avoid exposure - obtain special instructions before use.

EMERGENCY AND FIRST AID PROCEDURES

EYE:

OBJECT IS TO FLUSH MATERIAL OUR IMMEDIATELY AND THEN SEEK MEDICAL ATTENTION IMMEDIATELY flush eyes with a directed stream of water at least 15 minutes while forcibly holding eye lids apart to ensure complete irrigation of all eye and lid tissue. Washing eyes within one (1) minute is essential to achieve maximum effectiveness. SEEK MEDICAL ATTENTION IMMEDIATELY.

SKIN:

SEEK MEDICAL ATTENTION IMMEDIAELY. Flush thoroughly with cold water under shower while removing contaminated clothing and shoes. CONTINUE TO FLUSH UNTIL MEDICAL ATTENTION ARRIVES. Discard non-rubber shoes. Wash clothing before reuse.

INIIALATION:

Remove to fresh air. If breathing is difficult, have trained person administer oxygen. If respiration stops, give mouth-to-mouth resuscitation. GET MEDICAL ATTENTION IMMEDIATELY.

INGESTION:

           NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of milk or gelatin solution. If these are not available give large quantities of water. If vomiting occurs spontaneously, keep airway clear and give more milk, gelatin solution or water, GET MEDICAL ATTENTION IMMEDIATELY. Avoid vomiting, lavages or acidic antidotes. NOTE TO PHYSICIAN: Sodium Hypochlorite is an alkaline corrosive. For exposure by ingestion do not use emesis, lavages or acidic antidotes. Dilute immediately by giving milk, melted ice cream, beaten egg white, starch paste or antacids such as milk magnesia. Aluminum hydroxide gel or magnesium trisilicate gel. Avoid sodium bicarbonate because of  carbon di-oxide release. Sodium thiosulphate solution may prove beneficial by reducing unreacted material

 

Other Related PRODUCTS LINKS :

Textile Hypo Bleach , SODIUM HYPO CHLORITE , Sod Hypo Chlorite conc activeCHLORINE , CHLORINE LIQUID , Calcium Hypo Chlorite Conc active Chlorine , Chlorine Tablet cyanurate , Chlorine Tablets Calcium Based , DYE REMOVER ORG DICHLOR , Dechlorination Soln De-Hypo

Short Description: 
High-test hypochlorite (HTH) is sold for chlorination of WATER
Information: 

Sodium hypochlorite used for cleaning and disinfection. RXSOL is major manufacturer and supplier of highly purified chlorine bleach. Balancing of sodium hypochlorite ph also plays an important role during cleaning and other uses of sodium hypochlorite. free alkali containt required more neutrailzer during cleaning operation. All safety norms and physical and chemicals properties and  sodium hypochlorite chemical formula are updated in our MSDS of sodium hypochlorite sheet.

 

#SodiumHypo_ManufacturerSupplier
#SodiumHypo_MuscatDubaiMumbai
#Bleach_OmanUAE

Sodium Hypo Chlorite (12-15%) 250 Kg packing manufacturer and supplier in Gangavaram Visakhapatnam, Chennai Ennore, Haldia Paradip Kolkata Buzbuz, Fujairah UAE Middle East, Mumbai, Hazira, Surat, Gandhidham Mundra, Sohar, Barka, Muscat Oman, Nairobi Kenya Africa, Sudan Yemen, Canada

CAS No:7681-52-9 NaClO

SEA POWER CLEANER

Alias: 

SEA CLEANER, SeaClean, Sea Clean Plus 25 Ltr

Active Matter: 
93-95%
Application: 

Dosage Chart for Rock and Roll Cleaning

Fuel Oil Viscositry Centistokes at 50°C

RXSOL-20-2027-025 / 1000 Ltsof water

 

 

1st Stage

2nd Stage

Over 320 and sludge tanks

1 litre

1 litre

150 - 300

1 litre

0.75 litre

Up to 50

0.5 litre

Physical Properties

Colour

Light Brown Liquid

 

Density

In g/cm3 at 15°C: 0.9

 

Flash Point

Above 70 °C

 

PACKAGING

Order No

RXSOL-20-2027-025

Size (in litres)

20, 25, 35, 210.

Packing Size: 
25.00 Ltr.
Using Procedure: 

Directions for Use and Dose Rates

RXSOL-20-2027-025 is  specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Soak Method

For heavy soil put parts into undiluted RXSOL-20-2027-025, for general soiling use a solution of 10-30% RXSOL-20-2027-025 in water. Parts should be soaked for at least 30 minutes before washing off with water.

Spraying Method

Use neat RXSOL-20-2027-025 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation  for stubborn deposits.

Rock and Roll Method

Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1) First of all  heat the remaining oil in tanks .
2)By stripping constantly. flush the tank with sea water, 
3) Close  all suction and discharge valves .
4) 1st  Dose  Fill the tanks by ½ to 1 litre RXSOL-20-2027-025 per tone of     water   through pipe or manhole , for  75-80% of capacity of tank to be cleaned.
5) Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6) Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7) Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8) Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9) For completion add second dose of RXSOL-20-2027-025, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10) Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11) To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely.

Note: 

RXSOL-20-2027-025 is an effective  liquid blend of  modern low toxic, biodegradable solvent, concentrated emulsifier with penetrating agents, mild abrasives and wetting agents which makes this an excellent  liquid scouring cleansers  for cleaning and degreasing action which makes useful for Cargo tank cleaning after drying, semi-drying. And non-drying natural oils and fats. Saponifying and detergents.

Similar familly group of this product is Tank cleaner Plus, New ORG, SEA POWER CLEANER Degreaser Plus, Tank cleaner. 

Short Description: 
Specially formulated for cleaning of double bottom, deep and wing tanks etc, used for fuel oils. Also for local cleaning and degreasing of deck and engine rooms, Oil installations, workshops, plant yards, industrial plants as degreaser and cleaner
Information: 

SEA POWER CLEANER Degreaser Plus Degreaser Plus is classified as marine base tank cleaning chemicals and degreaser. Its powerful degreasing action helps to clean and emulsify heavy oil and grease to make water soluble. SEECLEANER Degreaser Plus concentrated cleaner based on petroleum solvents, emulsifying agents and surfactants.

SEA POWER CLEANER Degreaser Plus is powerfull solvent based degreaser. SEA POWER CLEANER easily penetrate oil greasy mud and also breakes the Carbonacious deposits.

#Sea_Cleaner
#Seacleaner_IndiaUAEoman
#sea_cleaningCHEMICALS

SEA POWER CLEANER Degreaser Plus most common degreaser in Shipping marine Industries. In shipchandling line SEA POWER CLEANER Degreaser Plus is such a popular degreaser, no one need its eplanation about its uses. SEA POWER CLEANER can be utilized directly on metal surface or this can be diluted with water for light weight cleaning. Popularity of SEA POWER CLEANER Degreaser Plus is only due to its multi function properties. All Engineering section maintenance can be controlled by SEA POWER CLEANER Degreaser Plus most common tank cleaner for lube oil / any petro solvent carrier.

SEA POWER CLEANER Degreaser Plus supplier in Mumbai, Surat, Gandhidham - Kandla Deen Dayal Port, Sikka - Jamnagar, Manglore, Goa, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Paradip, Fujairah, Sharjah, Abu Dhabi, Dubai, Muscat Sohar Oman Barka, Navi Mumabi MIDC, Canada

SEA POWER CLEANER Degreaser Plus Plus specialized marine chemicals developed to clean fuel oil, petroleum-containing products, and also selected as one of best cleaning product for the double bottom, deep and wing tanks etc.

During our working field experience, we observed that SEA POWER CLEANER Degreaser Plus Plus product also works as the powerful cleaner to dissolve stain of PET COKE, Presence of small quantities of SEA POWER CLEANER Degreaser Plus can enhance cleaning action of pet-coke from ship bulk cargo hold. Simply spray SEA POWER CLEANER Degreaser Plus on a heavily contaminated area of PET COKE and then use other ship hold cleaning chemicals like RX Tuff alkaline cleaner to complete hold cleaning process.

Sea Power cleaner degreasing and tankcleaning marine chemicals

Sulfamic Acid Descaler Cleaner

Sulfamic Descalant

Alias: 

Sulfamic Acid, Accepta 2316, Sulphamic Acid, SULPHAMIC ACID DESCALER, SULFAMIC DESCALANT, SULPHAMIC DESCALANT, SULPHAMIC DESCALER

Active Matter: 
95-96
Application: 

White crystalline soild, non volatile, non volatile, non hydroscopic. Soluble in water and odorless. Toxic by ingestion.

Uses: Metal and ceramic cleaning, amine sulfamates, ph control, hard water scale removal, electroplating.

At room temperatures, dilute aqueous Sulfamic Acid solution is stable for a long time but rapid hydrolysis occurs at elevated temperatures. Its solution is less corrosive toward metals than other mineral acid. When compared to most of the common strong mineral acids, Sulfamic Acid has desirable water descaling properties, low volatility, low toxicity and is a water soluble solid forming soluble calcium and iron-III salts. Because of its many positive attributes like handling ease, solubility and low corrosiveness, Sulfamic Acid is used for many diversified applications.

APPLICATIONS OF SULFAMIC ACID ---
•    Used as an immersion liquid
•    Used as filling with a Sulfamic acid descalant solution
•    Used through circulation for consistent concentration though the closed circuit
•    Used in cold as well as with temperature ranging from 40º to 60ºC
•    Sulfamic Acid is a very safe and highly effective descalant
•    Sulfamic Acid provides good cleaning and reduces manual cleaning.
•    Sulfamic acid is recommended for the cooling water for descaling the condenser on running plant basis.

Applications Of Sulphamic Acid:

Sulphamic acid in descaling

Sulphamic Acid is super efficient descaling agent and is used for cleaning a variety of industrial equipment and domestic appliances.

Sulphamic acid in paper & pulp Industry

Sulphamic Acid prevents pulp degradation due to temperature at the chlorination and hydrochloride stage. It permits bleaching at higher temperature and lower PH without loss of strength.

Sulphamic acid is used in manufacturing of Dyes, Pigments and in the dyeing of leather

Sulphamic Acid removes excess of nitrides used in the diazotization reactions in the manufacturing of dye stuffs and pigments. Nitrides if present in process water of effluents can also be removed by using Sulphamic Acid

Sulphamic acid in Chlorine Stabilization

Chlorine gas in water form HOCL which reacts with Sulphamic Acid form N-Chloro-Sulphamic Acid to N-ChloroSufamic Acid more stable and yet has active chlorine, Because of this, Sulphamic Acid is used for stabilizing chlorine in swimming pools and cooling towers.

Sulphamic acid in Electroplating and Electro-refining

Metal sulphamate electrolytes values for their high solubility cadmium, cobalt nickle, lead silver and radium sulphamte deposits are bright and dense. Lead sulphamate is used in refining lead when a high quality is desired.

Sulphamic acid in Sulphation and Sulphamation

Sulphamic acid is used for sulphation and sulphamation of many organic compounds. Sulphation of aklyl pheno-ethylen oxide condensation products 9for detergents and sulphation of ethoxylated phenol-formaldehyde resins is preferable with Sulphamic Acid. Stronger agents cause unwanted ring sulphomation.

Sulphamic acid in the Plastic industry

Sulphamic acid finds application in the plastic wherever a curing agents is required which does not have the disadvantage of inorganic acids and which acts faster than organic acids.

Packing Size: 
25.00 Kg.PWD
Using Procedure: 

DIRECTION OF USAGE

•    Machines should be rinsed with water to remove loose flakes & sludge's before use
•    Powder should be added to warm water for an ideal solution
•    Sample should be properly tested before using
•    Proper ventilation is essential for effective usage of Sulfamic Acid Descalant
•    After cleansing, the solution should be drained out and the system should be rinsed with     water until pH value is neutral
•    Rinsing with ROTO PASS – 212 for better metal prevention and passivation is recommended

Note: 

Packing of Sulphamic acid ( NH2SO3H or H3NO3S )

Sulphamic Acid is available in H.D.P.E. bags of net 25 and 50 Kgs. Material. Sample packets of 100-200 gms. are supplied on request. 

Advantages of using Sulphamic Acid

  • Sulphamic Acid has very high shelf life.
  • Sulphamic acid do not require storage/handing arrangement hence no adulteration possible.
  • Sulphamic acid has very high effectivity of the descaling.
  • Complete cleaning can be chemically achieved by Sulphamic acid and does not require post descaling manual cleaning.
  • Sulphamic acid is safe acid, packed in 50 kgs HDPE bags and has no handling hazards.
  • No storage tanks / system required for dosing.
  • The solid can be directly charged to system eliminating the cost of system reduces the leave of scaling solids and acts as anti - descalant.
  • Accidental excess dosing does not affect the metal of the circulating system but it acts to remove the deposited scale from the system.
  • It is recommended to does into the cooling water for descaling the condenser on running plant.

     

   Sulfamic Acid is used for descaling.

•    Sulfamic Acid is very efficient descaling agent and is widely used for cleaning a variety of industrial equipments, especially boilers, condensers, cooling tower and pipelines.

•    In paper & pulp Industry, Sulfamic Acid is used to prevent pulp degradation due to temperature conditions existing at the chlorination and hydrochloride stage. Sulfamic Acid also permits bleaching at higher temperature and lowers pH without loss of strength of fiber.

•    Sulfamic acid is used in manufacturing of Dyes, Pigments and in the dyeing of leather.

•    Sulfamic Acid removes excess of nitrides used in the diazotization reactions in the manufacturing of dye stuffs and pigments. Nitrides, if present, in process water of effluents can also be removed by using Sulfamic Acid.

•    In Chlorine Stabilization, Chlorine gas in water form HOCL which reacts with Sulfamic Acid form N-Chloro-Sulphamic Acid to N-ChloroSufamic Acid more stable and yet has active chlorine, Because of this, Sulfamic Acid is used for stabilizing chlorine in swimming pools and cooling towers.

•    In Electroplating and Electro-refining, Metal sulphamate electrolytes values for their high solubility cadmium, cobalt nickle, lead silver and radium sulphamte deposits are bright and dense. Lead sulphamate is used in refining lead when a high quality is desired.

•    In Solutation and Sulphamation, Sulfamic Acid is used for sulphation and sulphamation of many organic compounds. Sulphation of alkyl pheno-ethylen oxide condensation products for detergents and sulphation of ethoxylated phenol-formaldehyde resins is preferable with Sulfamic Acid. Stronger agents cause unwanted ring sulphomation.

•    In the Plastic industry, Sulfamic Acid finds application in the plastic wherever a curing agent is required which does not have the disadvantage of inorganic acids and which acts faster than organic acids.

Other Applications

•    Sulfamic Acid is preferred greatly to Hydrochloric Acid in household usage for its intrinsic safety value.

•    Sulfamic Acid is used in the design of many types of therapeutic agents such as Antibiotics, Nucleoside/nucleotide Human immunodeficiency virus (HIV) reverse transcriptase inhibitors, HIV protease inhibitors (PIs), anti-cancer drugs (steroid sulfatase and carbonic anhydrase inhibitors), anti-epileptic drugs, and weight loss drugs.

•    Sulfamic Acid is used as an acidic cleaning agent for metals and ceramics.

•    It is used frequently for removing rust and limescale.

•    Sulfamic Acid is used in the industrial cleaning of dairy and brew-house equipment.

•    It is used as a catalyst for esterification process.

•    Sulfamic Acid is used in Dye and pigment manufacturing.

•    Sulfamic Acid is used as an Ingredient in Denture Tablets, Fire Extinguishing Media.

•    Sulfamic Acid is used in Pulp and paper industry as a chloride stabilizer.
 

Short Description: 
Descalex blended with Inhibitor for removing scales obtained from water in heating and cooling systems e.g. boilers, Condensers, Heat Exchanger, jackets and coils
Information: 

Sulphamic acid descaler grade manufactured under specific control method to avoid extra free acid presence in end product. We are Sulphamic acid suppliers in Mumbai, Kandla, Vizag, Chennai, Kolkata and Exporter for Middle east - Gulf and Russia. Sulfamic acid price directly affected by moisture and other impuriteis present inside the Sulphamic Acid which can be easily detected by simple test  as pure sulfamic acid solubility in water almost giving clear solution. As before selection of sulfamic acid as cleaner make sure it should be free from free acid which is damaging metal surface.
 

Synonyms of Sulphamic Acid: SULFAMIC ACID, Sulfamidic acid, Amidosulfonic acid, Jumbo, Sulphamic acid, Amidosulfuric acid, Aminosulfonic acid, Imidosulfonic acid, Sulfaminic acid, Aminosulfuric acid, Sulphamidic acid, Sulfamidsaeure, sulfuramidic acid, Amidoschwefelsaeure, Kyselina sulfaminova 

Manufacturing, supplying and exporting of Sulphamic Acid. Our company Established in the year 1995 and we are involved in manufacturing supplying and exporting of various industries-based products.

Trader, Manufacturer, Supplier and  exporter of Sulphamic Acid.

Sulfamic Acid manufacture, exporter and supplier in India UAE Middle East, Oman, Nairobi Kenya. Sulfamic Acid supplier in Mumbai, Gandhidham, Kolkata, Chennai, Visakhapatnam, Fujairah, Ajman, Abudhabi, Dubai, Sharjah, Barka Muscat Oman, Africa, Canada, Sudan, Yemen

SULPHAMIC ACID DESCALER

RXSOL SULPHAMIC ACID DESCALER is an efficient descaling agent and is used for cleaning of a variety of industrial equipments and domestic appliances. RXSOL SULPHAMIC ACID DESCALER can be used for removing water and process scales from industrial equipments. Broadly these find use in the chemical and fertilizer industry, dairy and food equipments, brewery equipment, marine equipment, sugar industry etc.

 

RXSOL SULPHAMIC ACID DESCALER is non-inflammable and, unlike Hydrochloric Acid, does not give off obnoxious fumes. The safety of RXSOL SULPHAMIC ACID DESCALER has been further increased by the addition of corrosion inhibitors and other chemicals to make RXSOL SULPHAMIC ACID DESCALER a versatile descaling agent which is safer still in terms of equipment corrosion and safety of personnel. The field of descaling is wide and the exact application of RXSOL SULPHAMIC ACID DESCALER can only be determined after considering the nature and extent of scaling, and the type of equipment that is to be descaled.

 

Application and Dosage

RXSOL SULPHAMIC ACID DESCALER is used in various applications and at different concentration ratio depending upon the amount and type of deposit and system parameters. Normally for a system with hard scale deposits a 5-20% v/v solution is recommended. Preferably this solution should be made with pre-heated water at 70-80°C. The total volume of solution should be about 1.2 times of water holding capacity of equipment to be descaled. Recirculate the solution for about 6 hours using a acid compatible pump. After descaling it is necessary to passivate system with 2% solution of RXSOL ANTISCALANT into the last rinse and return to normal service.

 

Important

For Extremely Rock Hard And Thick Scaling It Is Recommended To Soften The Scale Prior To Descaling By Recirculating And Soaking 5-10% Solution of Alstascale Ss22 For 2-3 Hours Followed With Rinsing With Plain Water Before Dosing Descalant

In Case of High Silica And Iron Deposits Add 2-3 Parts RXSOL-11-1102-025 To 10parts of Sulfamic Acid

After Dosing Chemical Never Heat Solution By Firing Burners

 

Handling Measures and Precautions

Proper Human Safety Products Such As Splash Goggles, Lab Coat, Vapor Respirator, Gloves And Boots Should Be Worn While Handling And Applying Chemicals. Splashes On Skin Should Be Washed off With Water Immediately. In Case of Splashing Into The Eyes, Flush It With Fresh Water And Obtain Medical Attention. Should Not Be Injected. Please Refer Msds For More Details.

 

Storage

This Product Should Be Stored In Original Containers In Cool And Dry Place, Away From Sources of Heat, Flame And Direct Sunlight. Please Refer Technical Data Sheet, Label And Msds For More Details And Shelf Life.

Sulphamic Acid Scale Cleaning Chemicals

ANTISCALANT 9209 RX Seawater Distillation Plants

Antiscalant 9209 RX is specially designed to control the development of scale in seawater distillation plants. It is based on a synergistic blend of phosphonates which are found to be more effective than other polymers at controlling carbonate and sulphate scale formation in sea water distillation units .

Alias: 

Hydrex 9209, Metito M 915, Genesys LF

Active Matter: 
94-98
Application: 

PREVENTS IRON FOULING and SILICA ANTISCALANT properties.

  1. Convenient liquid formulation for automatic dosing using suitable dosing equipment.
  2. Prevents formation of hard scale in seawater distillation units.
  3. Performance surpasses other similar products.
  4. Cost effective concentrate.
  5. Effective at high temperatures.
Packing Size: 
30.00 Kg.Liq
Using Procedure: 

The correct dosage rate is dependant upon several parameters, including feed temperature, pH, and chemical analysis and will be specified by your consultant after a detailed survey of your plant. To obtain the best results, Antiscalant 9209 RX should be added continuously using a suitable metering pump.

In general PRACTICE :
Antiscalant 9209 RX should be dosed continuously to the feed water upstream of the cartridge filters. Typical dosage rates are 2 – 4 mg/L.
Antiscalant 9209 RX may also be used in sea water applications where iron is present, recycle of brine is in use or there is no feed water pH reduction by acid dosing.

Typical dose rates are 0.5 – 1.0 mg/L
Antiscalant 9209 RX dose rate in the feed water should be less than 5 mg/L in potable water systems. 
Antiscalant 9209 RX can be diluted and is fully miscible with water in all proportions.
 

Note: 

Antiscalant 9209 RX  is an aqueous solution of neutralised phosphonic acid. It has been approved for use in potable water applications and does not contribute to assimilable organic carbon (AOC), which can act as source of nutrient for micro-organisms. 

Short Description: 
Antiscalant for Water Distillation Units , specially designed to control the development of scale in seawater distillation plants.

ANTISCALANT 9209 RX seawater distillation plants, Compatible with all types of polyamide membrane
ANTISCALANT 9209 RX powerfully Inhibits common scales Calcium carbonate/sulphate - Calcium phosphate, Barium/Strontium sulphate - Silica, Iron/Manganese

#AntiScalant_ManufacturerSupplier
#Antiscalant_DubaiAbudhabiAjmanFujairah
#Antiscalant_MuscatSoharOman
#Antiscalant_MumbaiChennaiKolkataSuratGandhidhamVizag

RXSOL-51-6005-025 ANTISCALANT and Antifoulant for Reverse Osmosis and Nano Filtration unit.

ANTISCALANT 9209 RX FOR seawater distillation plants manufacturer and supplier in Fujairah, Muscat, Barka, Oman, Dubai, Sharjah, Abudhabi, UAE Middle East, Ajman, Mumbai, Kolkata, Kandla, Visakhapatnam, Chennai Surat, CANADA, Kenya Nairobi, Jinja Uganda

ANTISCALANT 9209 RX Seawater Distillation Plants RXSOL-51-6005-025 is Suitable for Reverse Osmosis (RO) and NanoFiltration (NF) membranes

✓ Effective at LSI up to +2.6

✓ Excellent inhibitor for iron fouling

✓ Excellent silica antiscalant

✓ NSF listed product

✓ Approved for use in drinking water applications (UKDWI)

✓ Compatible with all types of polyamide membrane

✓ Replaces acid addition

✓ Inhibits common scales

- Calcium carbonate/sulphate

 - Calcium phosphate

 - Barium/Strontium sulphate

 - Silica

- Iron/Manganese

ANTISCALANT 9209 RX Seawater Distillation Plants RXSOL-51-6005-025 Inhibits Scale Formation, Prevents Iron Fouling

Broad Spectrum Antiscalant and Antifoulant Liquid

Dibromo dimethyl hydantoin

Packing Size: 
50.00 Kg
Short Description: 
a white crystalline solid that is sparingly soluble in water

Cool Water Treat

Alias: 

C.W.T. Inhibitor 9-111, COOL WATER TREAT NCL, Coolwater Treat, Cool water treat, Cool Treat, Corrosion Inhibitor for Cooling Water, CoolTreat 25 Ltr

Active Matter: 
45-50
Application: 

Cool Water Treat  is a highly effective corrosion inhibitor for all common metals in cooling water systems. Testing has shown no detrimental effects on non metallic substances such as seals, glands, packing, hoses, gaskets etc., normally used in these systems. Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool Water Treat  applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces. For new builds, RXSOL  Ships Service recommends cleaning of the water system before commencing service. The system will always contain small amounts of oil and iron oxides, and this can be removed in one operation. If the system is corroded or is more heavily contaminated, degreasing scale is recommended. For systems previously treated with other products, RXSOL  Ships Service recommend to drain and flush the system before refilling with distilled water and Cool Water Treat . The system should be clean and free from scale and corrosion products when starting the treatment. The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water treat can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Packing Size: 
25.00 Ltr.
Using Procedure: 

Cool Water Treat should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.

Dosing and Control

Initial dosage for an untreated system is 60 litres of Cool Water Treat Cool water Treat Corrosion Inhibitor / ton of untreated distilled water (6%). This will provide sufficient protection of the system for a period of two to five years under normal conditions. 6% Cool water Treat Corrosion Inhibitor should also be dosed in all make up water added to the system to compensate for lost coolant. The engine manufacturer's recommendations for water quality should always be complied with. Chloride levels should always be as low as possible. Most engine manufacturers recommend a maximum of 50 ppm chlorides. For this reason, RXSOL Service recommends the use of distilled water as make-up.

Note: 
  • Liquid product, easy to use
  • Environmentally friendly, fully organic product, low toxicity
  • Effective against cavitation and erosion. Superior heat transfer properties
  • Compatible with hoses, gaskets and seals
  • Compatible with glycols for frost protection
  • Stable product-non depleting
  • The product can be used for corrosion inhibition in many types of closed re-circulation system cooling water systems
  • Approved by major engine manufacturers
Short Description: 
Cool water Treat Corrosion Inhibitor can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.*

Cool Water Treat is specialized corrosion inhibitor for Cooling Water system.

#CorroSionInhibitor_CoolingSystem
#CoolingWaterTreatmentChemicals
#CWTinhbitor_ManufacturerSupplierIndiaUAEoman

Cool Water Treat corrosion inhibitor for cooling water system manufacturer and supplier in Mumbai, Navi Mumbai, Gandhidham, Hazira Surat, Chennai Ennore, Vizag Visakhapatnam, Kolkata Haldia, Buzbuz, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Muscat, Oman, Canada, Nairobi Kenya, Sudan, Yemen

Cooling Water Corrosion Inhibitor

Hydrogen Peroxide 6% Solution

Hydrogen peroxide (H2O2) is the only germicidal agent composed only of water and oxygen. Like ozone, it kills disease organisms by oxidation! For this reason, Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.

Alias: 

Hydrogen Peroxide, Mild Disinfectant and cleaning agent

Active Matter: 
6%
Application: 

Application : Adults the elderly and children : Apply the solution directly with a PAD of cotton wool required.

Packing Size: 
500.00 Bottle
Using Procedure: 

Active Ingredient : Hydrogen Peroxide 6%

Note: 

1. Cuts and infections

Soak any infections or cuts in 3% for five to ten minutes several times a day. Even gangrene that would not heal with any medicine has been healed by soaking in Hydrogen peroxide. Put half a bottle of hydrogen peroxide in your bath to help rid boils, fungus or other skin infections.

2. Rejuvenating Detoxifying Bath

Use about 2 quarts 3% Hydrogen peroxide to a tub of warm water. Soak at least 1/2 hour, adding hot water as needed to maintain a comfortable water temperature.

3. Foot Fungus

To cure a foot fungus, simply spray a 50/50 mixture of Hydrogen peroxide and water on them (especially the toes) every night and let dry.

4. Bird Mites Infections

Patients infected by tiny mites report that hydrogen peroxide effectively kills the mites on their skins. They spray it on their skin a couple of times (with a few minutes in between the applications) with amazing results.

5. Sinus Infections

A tablespoon of 3% Hydrogen peroxide added to 1 cup of non-chlorinated water can be used as a nasal spray. Depending on the degree of sinus involvement, one will have to adjust the amount of peroxide used.

6. Wound Care

3% H2O2 is used medically for cleaning wounds, removing dead tissue, and as an oral debriding agent. Peroxide stops slow (small vessel) wound bleeding/oozing, as well.

Some sources recommend soaking wounds for five to ten minutes several times a day. However, washing and rinsing action is sufficient. You shouldn’t leave the solution on open tissue for extended periods of time as, like many oxidative antiseptics, Hydrogen peroxide causes mild damage to tissue in open wounds. Therefore it is important to use with caution.

Personal Care

7. Mouthwash

Many people don’t realize that hydrogen peroxide makes a very effective and inexpensive mouthwash. Take one capful (the little white cap that comes with the bottle) and hold in your mouth for 10 minutes daily, then spit it out. You will not have canker sores and your teeth will be whiter. Use 3% H2O2 – add a dash of liquid chlorophyll for flavoring if desired.

8. Toothpaste

Use baking soda and add enough 3% H202 to make a paste.

9. Toothbrush

Or, just dip your brush in 3% H202 and brush. Soak your toothbrush in Hydrogen peroxide to keep them free of germs.

10. Tooth Ache

Hydrogen peroxide is not a pain killer; however, as an anti-viral, antibacterial and anti-fungal agent, it is effective at treating the pathogen that is causing the infection. The following is from my own personal experience: My dentist wanted to give me a root canal some time ago as one tooth was inflamed and, in her opinion, would die. I felt some discomfort but told her that I would give it chance to heal. I rinsed with hydrogen peroxide (several times a day) as well ascoconut oil (once a day). The discomfort went away and I have had no further problems with the tooth.

If you have a terrible toothache and cannot get to a dentist right away, put a capful of 3% Hydrogen peroxide into your mouth and hold it for 10 minutes several times a day. The pain will lessen greatly.

11. Tooth Whitening

Having used 3% Hydrogen peroxide as a mouth wash for sometime ago, I am thrilled to note that my teeth have been beautifully and effortlessly whitened. I used to pay so much for professional whitening, those silly strips and uncomfortable trays. Live and learn.

12. Douche

Add 2 capfuls of 3% Hydrogen peroxide in warm distilled water once to twice a week to remove even chronic yeast infections.

13. Colonic or Enema

For a colonic, add 1 cup (8 ozs.) 3% H202 to 5 gallons warm water. (Do not exceed this amount) For an enema, add 1 tablespoon of 3% H202 to a quart of warm distilled water.

14. Hair Lightening

Peroxide is a bleaching agent and is used for lightened hair. Dilute 3% Hydrogen peroxide with water (50 / 50) and spray the solution on your wet hair after a shower and comb it through. You will not have the peroxide burnt blonde hair like the hair dye packages, but more natural highlights if your hair is a light brown, faddish, or dirty blonde. It also lightens gradually so it’s not a drastic change.

15. Contact Lenses

Hydrogen peroxide is used as a disinfectant in CIBA Vision’s Clear Care no rub contact lens cleaning solution, due to its ability to break down the proteins that build up on the lense from the eye’s immune response, resulting in increased comfort for those with sensitive eyes.

Sanitizing / Disinfectant / Cleaning

16. In the Dishwasher

To disinfect your dishwasher, add 2 oz. of 3% Hydrogen peroxide to your regular washing formula.

17. Kitchen/Household surfaces

Clean your counters and table tops with hydrogen peroxide to kill germs and leave a fresh smell. Simply put a little on your dishrag when you wipe, or spray it on the counters.

Fill a spray bottle with a 50/50 mixture of 3% Hydrogen peroxide and water and keep it in every bathroom to disinfect without harming your septic system like bleach or most other disinfectants will. After rinsing off your wooden cutting board, pour or spray hydrogen peroxide (and then vinegar) on it to kill salmonella and other bacteria.

Keep a spray bottle of 3% (straight) to disinfect the interior of the refrigerator and kids’ school lunch boxes. You can also use hydrogen peroxide to clean glass and mirrors with no smearing. Use it in the bathroom to sanitize the counters, toilets, floors, etc.

Directions: It is best to use two spray bottles rather than mixing the solutions together. Put straight vinegar in one and straight Hydrogen peroxide in the other spray bottle. When you want to sanitize a surface (cutting board, counters, sink, cages, toys, toilets, floors, etc.) spray one mixture on the surface, then the other. When they mix, for a brief time the chemical action of the two make a very powerful sanitizer. You can rinse off the surface afterwards. This applies for kitchen surfaces as well as vegetable and food decontamination.

18. Humidifiers/Steamers

To clear the air, use 1 pint 3% hydrogen peroxide to 1 gallon of water in a humidifier or steamer.

19. Washing/Laundry

You can also add a cup of hydrogen peroxide instead of bleach to a load of whites in your laundry to whiten them. If there is blood on clothing, pour directly on the soiled spot. Let it sit for a minute, then rub it and rinse with cold water. Repeat if necessary.

Peroxide is a perfect alternate solution to keep those clothes white. Also, when chlorinating clothes, they tend to wear out faster – peroxide won’t do that.

20. Laundry / Stain Removing

3% Hydrogen peroxide is an effective stain remove if it is used fairly soon after a spill – although blood stains as old as 2 days have been successfully lifted with Hydrogen Peroxide. If a little peroxide is poured onto the stain it will bubble up in the area of the blood, due to a reaction with catalase. After a few minutes the excess liquid can be wiped up with a cloth or paper towel and the stain will be gone.

3% H2O2 must be applied to clothing before blood stains can be accidentally “set” with heated water. Cold water and soap are then used to remove the peroxide treated blood.

Please note: Hydrogen peroxide will bleach or discolor many fabrics.

Food Preparation

21. Food preparation/decontamination

Combination of vinegar and hydrogen peroxide make a cheap, effective and non-toxic disinfectant agent and is said to be more effective at killing pathogens than bleach. As it is non-toxic, you can use it to cleanse cooking and food preparation areas (as well as fruits and vegetables – see #24). In tests run at Virginia Polytechnic Institute and State University, pairing Vinegar and Hydrogen Peroxide mists, kills virtually all Salmonella, Shigella, or E. coli bacteria on heavily contaminated food and surfaces.

22. Vegetable Soak

Use as a vegetable wash or soak to kill bacteria and neutralize chemicals. Add 1/4 cup 3% H2O2 to a full sink of cold water. Soak light skinned (light lettuce) 20 minutes, thicker skinned (like cucumbers) 30 minutes. Drain, dry and refrigerate. Prolongs freshness.

If time is a problem, spray vegetables (and fruits) with a solution of 3%. Let stand for a few minutes, rinse and dry.

23. Meat Sanitizing

You can also use it to rinse off your meat before cooking.

24. Leftover tossed salad

To help keep leftover salads, spray with a solution of 1/2 cup water and 1 Tbsp. 5%. Drain, cover and refrigerate.

25. Marinade

Place meat, fish or poultry in a casserole (avoid using aluminium pans). Cover with a dilute solution of equal parts of water and 3% H202. Place loosely covered in refrigerator for 1/2 hour. Rinse and cook.

26. Sprouting Seeds

Add 1 ounce 3% Hydrogen peroxide to 1 pint of water and soak the seeds overnight. Add the same amount of hydrogen peroxide each time you rinse the seeds.

Grades of Hydrogen Peroxide

A) 3.5% Pharmaceutical Grade: This is the grade sold at your local drugstore or supermarket. This product is not recommended for internal use. It contains an assortment of stabilizers which shouldn’t be ingested. Various stabilizers include: acetanilide, phenol, sodium stanate and tertrasodium phosphate.

B) 6% Beautician Grade: This is used in beauty shops to color hair and is not recommended for internal use.

C) 30% Reagent Grade: This is used for various scientific experimentation and also contains stabilizers. It is also not for internal use.

D) 30% to 32% Electronic Grade: This is used to clean electronic parts and not for internal use.

E) 35% Technical Grade: This is a more concentrated product than the Reagent Grade and differs slightly in that phosphorus is added to help neutralize any chlorine from the water used to dilute it.

F) 35% Food Grade: This is used in the production of foods like cheese, eggs, and whey-containing products. It is also sprayed on the foil lining of aseptic packages containing fruit juices and milk products. THIS IS THE ONLY GRADE RECOMMENDED FOR INTERNAL USE.

G) 90%: This is used as an oxygen source for rocket fuel.

Short Description: 
Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.

Hydrogen Peroxide 6% Solution supplier in Mumbai, Kandla, Visakhapatnam, Chennai, Kolkata, Fujairah, Dubai, Sharjah, Abu Dhabi.

Mild Disinfectan and cleaning agent

GAS TURBINE Cleaner GTC 1000

RXSOL GTC 1000 GAS TURBINE CLEANER is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors. One operation cleans and protects the engine -and also inhibits corrosion.

Blend of non-ionic surfactants, corrosion inhibitors, organic solvents and demineralised water.

Alias: 

Clean Blade GTC 1000, Compressor Washing Chemicals GAS TURBINE CLEANER

Active Matter: 
98 - 99%
Application: 

Gas Turbine Compressor Cleaning.

Packing Size: 
220.00 Kg.Liq
Using Procedure: 

By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes. RXSOL GTC 1000 GAS TURBINE CLEANER has a maximum ash content of <0.01%, as part of the compliance with OEM specifications for compressor washing fluid.

The unique corrosion inhibitor allows engines to be left ready for an instant restart, even in salty offshore conditions.

Note: 

Appearance
Clear pale straw coloured liquid with a mild pleasant odour.

Solubility
Completely soluble in water. No agitation required.

Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.

Short Description: 
RXSOL GTC 1000 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors.

RXSOL GTC 1000 GAS TURBINE CLEANER Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen

Liquid Detergent for Gas Turbine Compressor Cleaning for GE Aircraft

CHLOR NADCC Tablet 5 gm

NADCC-Chlor (NaDCC tablet) supplier in India OMAN and Middle East. This chloro tablet is a broad spectrum fast acting sanitizer and water sterilizer, rapidly effective against BACTERIA, VIRUSES, FUNGI and PROTOZOA. Total spectrum of activity i.e. effective against hydro hypophilic viruses, gram positive & gram negative bacteria, fungi mould, yeast, mycoplasmas & protozoa.

Alias: 

ef - chlor, Drinking water purifier

Application: 

- Drinking Water Purification 

- Hospital Disinfection 

- Baby Bottle Sterilizing

- Janitorial Cleaning

- Food and Catering

- Fruit and vegetable disinfection

- Poultry

Packing Size: 
10.00 No
Note: 

- For fast treatment of water for: 

   * Emergency and Disaster

   * Travel and Camping

   * Household

   * Peace Keeping/Defence Forces

   * Marine Application

   * Disinfection of Water System

   * Municipal Water supplies

Short Description: 
NaDCC tablet is a broad spectrum fast acting sanitizer and water sterilizer , rapidly effective against BACTERIA, VIRUSES, FUNGI and PROTOZOA.

Range of  NADCC - Chlor Taablet

Name of Product

Available Chlorine

Volume of Water to be treated

Packing

NADCC - chlor 3.5 mg 2 mg 1 litre 10 x 10 / 10 x 5 Strips
NADCC- chlor 8.5 mg 5 mg 1-2 litres 10 x 10 Strips
NADCC - chlor 17 mg 10 mg 3-4 litres/1 Gallon 10 x 10 Strips
NADCC- chlor 33 mg 20 mg 5 litres 10 x 10 Strips
NADCC- chlor 67 mg 40 mg 10 litres 10 x 10 Strips
NADCC - chlor 75 mg 45 mg 10-12 litres 10 x 10 Strips
NADCC - chlor 167 mg 100 mg 20-25 litres 10 x 10 Strips
NADCC - chlor 400 mg 240 mg 50-80 litres 8 x 8 Strips
NADCC - chlor 500 mg 300 mg 150 litres 8 x 8 Strips
NADCC - chlor 1.67 gm 1000 mg 500 litres 4 x 8 Strips
NADCC - chlor 2.50 gm 1500 mg 750 litres 200 Tablets Jar
NADCC - chlor 3.5 gm 2100 mg 1000 litres 142 Tablets Jar
NADCC - chlor 4 gm 2400 mg 1000-1200 litres 20 Tablets Jar
NADCC - chlor 8.68 gm 5,000 mg 2500 litres 50 Tablets Jar
NADCC - chlor 15 gm 9,000 mg 4000-5000 litres 50 Tablets Jar
NADCC - chlor 200 gm 1,20,000 mg 50000 litres 5 Tablets Jar
NADCC - chlor granules 60 % 50000 litres 1 kg Jar

ef - chlor 8.5 mg 5 mg 1-2 litres 10 x 10 Strips

ef - chlor 17 mg 10 mg 3-4 litres/1 Gallon 10 x 10 Strips

ef - chlor 33 mg 20 mg 5 litres 10 x 10 Strips

ef - chlor 67 mg 40 mg 10 x 10 Strips

ef - chlor 75 mg 45 mg 10-12 litres 10 x 10 Strips

ef - chlor 167 mg 100 mg 20-25 litres 10 x 10 Strips

ef - chlor 400 mg 240 mg 50-80 litres 8 x 8 Strips

ef - chlor 500 mg 300 mg 150 litres 8 x 8 Strips

ef - chlor 1.67 gm 1000 mg 500 litres 4 x 8 Strips

ef - chlor 2.50 gm 1500 mg 750 litres 200 Tablets Jar

ef - chlor 3.5 gm 2100 mg 1000 litres 142 Tablets Jar

ef - chlor 4 gm 2400 mg 1000-1200 litres 20 Tablets Jar

ef - chlor 8.68 gm 5,000 mg 2500 litres 50 Tablets Jar

ef - chlor 15 gm 9,000 mg 4000-5000 litres 50 Tablets Jar

ef - chlor 200 gm 1,20,000 mg 50000 litres 5 Tablets Jar

ef - chlor granules 60 % 50000 litres 1 kg Jar

- RECOMMENDED by leading infection   control experts worldwide. 

- EFFECTIVE against virtually all known 

  bacteria, viruses and spores. 

- SAFE to handle and store.

- COMPACT storage and transport   reducing transport costs.

- ECONOMIC AND ACCURATE - no under   or over dosing.

- GREATER BIOCIDAL EFFECT-Rapid   release of HOCl encouraging fast biocidal   activity forming clear disinfecting   solution.

- MORE ENVIRONMENTALLY FRIENDLY than 

  alternative disinfectants. 

- FAST DISSOLVING and ready to use   quickly. 

- STABLE tablets with 3 years shelf life. 

- Available in a wide selection of tablet 

  strengths. 

- RESISTANT to organic spoilage.

CHLOR NADCC Tablet Water Purifier Sanitizer manufacturer and supplier in India Mumbai, Gandhidham, Chennai, Kolkata, Gandhidham, Visakhapatnam, UAE Middle East Dubai, Sharjah, Ajman, Abudhabi, Oman Barka, Muscat, Canada

Water Purifier Sanitizer

Hydrogen Peroxide

Hydrogen peroxide is a chemical compound with the formula H2O2. It is the simplest peroxide (a compound with an oxygen-oxygen single bond) and in its pure form is a colorless liquid, slightly more viscous than water.

Alias: 

H2O2 35 percent, HydrogenPeroxide 35 percent 30 Kg, Hydrogen Peroxide 35%

Application: 

Hydrogen Peroxide has many use including House Hold, Domestic. Agriculture, Textile, Industries, Medical and West water Treatment.

Packing Size: 
30.00 Kg.Liq
Using Procedure: 

House Hold : One of the most common uses of hydrogen peroxide is as a disinfectant. Spray it on surfaces like kitchen counter top and wipe with a clean rag. It can be used as a mouthwash too. You have to dilute the chemical with water and use it for rinsing the mouth. This mouthwash is also said to whiten teeth. Ensure that you do not swallow the liquid, while rinsing.
It can also be used to wash vegetables and fruits, in order to get rid of germs and pesticides. Add some hydrogen peroxide to a bowl full of water (you may also add a few pinches of salt). Soak the veggies and fruits for some time. Remove them and rinse with cold water, before use.This chemical is also used to purify water in swimming pools.
 

Agriculture : Farmers use it as an insecticide. They spray diluted form of this chemical, on plants, so that the pests and weeds get killed, without causing harm to the plants. Its also used for watering plants. Mix an ounce of this chemical with a quart of water and use it on plants. Apart from boosting the level of oxygen in the soil, this mixture is also said to prevent root rot. Some people soak seeds in it, after diluting it with water. It is said that this will fasten the process of germination. For this purpose have to mix 1.5 teaspoons of hydrogen peroxide in a cup of water.

Textile: It acts as a stain remover. Put 1 spoon tea in 1 bucket water  and let it sit for a while. After that, rinse the stains with water and soap.
As it has bleaching property, it is used as a bleach too.

IIndustrial :

Reduced Sulfur Compound Treatment for Refinery Wastewater

Sulfur compounds, such as hydrogen sulfide, thiosulfates and mercaptans, can present serious refinery wastewater problems. Hydrogen peroxide treatment is a cost effective way to treat these reduced sulfur species.

Supplemental Dissolved Oxygen to Reduce BOD and COD

Hydrogen peroxide has been used to reduce BOD and COD in refinery wastewater Supply of Supplemental Dissolved Oxygen (DO) when biological treatment systems experience temporary overloads or equipment failure.Predigestion of wastewater which contains moderate to high levels of compounds that are toxic, inhibitory or recalcitrant to biological treatment.As indicated by these examples, hydrogen peroxide can be used as a stand-alone treatment or as an enhancement to existing physical or biological treatment processes, depending on the situation.

Wastewater Pretreatment
Hydrogen peroxide is one of the most versatile, dependable and environmentally compatible oxidizing agents. The relative safety and simplicity of its use as an oxidizing agent has led to the development of a number of applications in refinery wastewater systems.

 

Note: 

Product specification

Molar mass :::--- 34.0147 g/mol
Appearance :::--- light blue; colorless in solution
Odor :::--- sharpBoiling point :::--- 150.2 °C, 423 K, 302 °F
Solubility in water :::---Miscible
Solubility :::--- soluble in ether, alcohol insoluble in petroleum ether
Viscosity :::---1.245 cP (20 °C)

Short Description: 
Pure form is a colorless liquid, slightly more viscous than water.

Hydrogen Perxoide supplier and exporter in India and Middle East. H2O2 used as an oxidizer, bleaching agent and antiseptic.

#HydrogenPEROXIDE_Muscat
#HydrogenPEROXIDE_DUBAI
#HydrogenPEROXIDE_Mumbai
#HydrogenPEROXIDE_Surat
#HydrogenPEROXIDE_Kolkata

Hydrogen Peroxide 35% Exporter Importer and supplier in India UAE Oman, Nairobi, Canada. Pure Hydrogen Peroxide supplier in RUWI BARKA, Muscat Soha Oman, Fujairah, Sharjah, Ajman, Abudhbai, Dubai, Mumbai, Surat GIDC, Gandhidham, Chennai, Kolkata, Visakhapatnam, AndhraPradesh, Ennore, Paradip

Other Valubale Product distributor manufacturer supplier in India UAE OMAN:

Hydrogen peroxide 35%, 50%, 60%

Caustic Soda Flakes & Pearls

Phosphoric acid 85% Food grade

Soda ash light & Dense

CDEA

White Oil

Ferric Chloride 40-42%

Hydrochloric Acid 30-35%

Sulphuric Acid 98%

Nitric Acid 68% / 61%

Formaldehyde 37%

TDI 80:20

Methylene Chloride

H2O2

stock-clearance.png