TOOL CLEANER

Product Description | Product Application | Product Notes| Product DOSE

Pliers, wrenches, chisels, blades and so forth are all being used in dirty, greasy situations.  For best performance and utility it is necessory to keep them clean and degreased. This  specially formula

Description:

Pliers, wrenches, chisels, blades and so forth are all being used in dirty, greasy situations.  For best performance and utility it is necessory to keep them clean and degreased. This  specially formulated solvent is intended for maintenance cleaning on grime, grease, lubrication fluids, silicone, tars, adhesives, and fluxes.  its standarised and harmless to most plastics so it can be utilize  to clean plastic grips, such as the pliers 

Code: RXSOL-16-1023-025

Other Equivalent Brand

Short Description: This specially formulated solvent is intended for maintenance cleaning on grime, grease, lubrication fluids, silicone, tars, adhesives, and fluxes.

TOOL CLEANER

Application:

With the cloth rag, spray a small amount of the multi-purpose cleaner onto the tool and rub excess dirt and grime off. Multi-Purpose Cleaner evaporates without leaving residue and is essentially noncond

Application:

With the cloth rag, spray a small amount of the multi-purpose cleaner onto the tool and rub excess dirt and grime off. Multi-Purpose Cleaner evaporates without leaving residue and is essentially nonconductive, non-corrosive, and non-staining, which means you don’t have to worry about hurting your tools when cleaning.

 

Start by filling the bucket with hot water and a small amount of RXSOL TOOL cleaner.  Soak your tools in the bucket for 30 seconds to a minute.  With your wire brush, scrub the tools to remove dirt and grime.  Rinse and repeat until all dirt has been cleared from the tool.  Let dry atop a cloth rag.  For older tools with a considerable amount of rust, you will want to take the steel wool and scrub the rust off.  Allow time for everything to dry.  It’s important to make sure all of the tools are absent of moisture to prevent future rusting.  Use your dry cloth rag and wipe down as much as possible to ensure that all water is gone.  As a final cleaning, use a small amount of RXSOL Cleaner and wipe down each tool.

Although most new tools are rust resistant, After cleaning, you may use rust preventive.  By applying some to a small rag and wiping your older tools down, you will help prevent them from rusting.

Effective cleaning after every use is the best way to ensure you’ll get the best results from the tools you depend on. 

Using Procedure:

Note:

Technical Specifications:

TOOL CLEANER manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of TOOL CLEANER at a competitive price from us. We have ready stock of TOOL CLEANER in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Packing Size: 25.00 Ltr.

Article News:

,

HASHTAG:

#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant

#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable

#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater

#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride