Scale remover – A life enhancing product
Scale in industrial scenario means residues of calcium carbonate that are often found to collect in hard water surfaces, boilers, diesel engine, heat exchangers evaporators, cooling systems etc. When the machineries are at work day in and day out without getting appropriate maintenance, scale formation becomes a common scene. These residues in turn prove to be very harmful for these machineries by contaminating their working process and also slowing down the machine on the whole. When scales are not removed timely specially in industrial machineries such as boilers and cooling systems, they interfere with the heat transfer or the cooling process, lead to overheating and ultimately machinery rupture. To increase the life of these machineries, it’s essential to remove all kind of rusts from both hot and cold water equipment.
Descaling forms a very important role in cleaning and maintaining these industrial machineries. Now a day market has some of the best descaling liquids or scale remover solutions which proved their mettle in removing scale. Depending upon one’s need one can choose from a variety of scale removers available in the market such as water scale remover, mineral scale remover, rust scale remover, hydrocarbon scale deposit remover, lime remover, hard water scale remover etc.
The RX Marine descaling liquids available in the market are formulated form heavy duty chemicals which help in cleaning the surfaces thoroughly without harming the surface. These scale removers do not contain any toxic cresols or other tar oils and thus are safe to use. These scale removers are special formulations used to clean mineral scales from both cooled and heated water passages. They have the ability to dissolve calcium carbonate deposits without any need of heating it up. Many scale removers can be used while the machinery is at work. These removers contain approx.70% of the active matter in their concentrated form.
It can be used in bottling industry for heaters, exchangers, sterilizers, rinse tanks and washers. It can be used in automotive industry in dynamometers, closed circuit cooling, molders and radiators. It can be used in food industry to clean refrigeration equipment, condensers, steam tables, and ice machines. It can be used to clean metals such as bearings, fans, castings, vacuum furnaces etc. It can be used in construction industry for cleaning chillers, pipe-work and cooling towers. It can even be used effectively in household scale removal such as scale removing from appliances like geysers, washing machines, dish washers, bath tubs and fixtures.
RX Marine scale removers have quite a few impressive qualities that render them advantageous than others the market. These scale removers are non-toxic and non-fuming. It improves plant efficiency, lowers maintenance cost and decreases down time. It can dissolve large deposits of calcium carbonate deposits. It can be used in both concentrated and diluted form depending upon the gravity of scale formation. It is economical and effective even in small quantities. It removes scale fast and effectively. It is soft on ferrous materials. It effectively removes scales from both heated and cooled water systems. It is safe for anybody to use compared to other acids. Moreover, equipment can also be cleaned while operation. Also it cleans without pitting. It is safe on even copper, nickel, bronze, brass, iron, rubber and stainless steel surfaces.
If the surface to be cleaned is a metal which has oil, grease and sludge over it, make sure to clean the surface for all this stains before using scale remover. This will give effective results. For higher degree of scale formation, the solution can be used in concentrated form by circulation method. In case of cleaning smaller equipment, the soak method can be applied by immersing the equipment in the water mixed with scale remover solution. RxMarine always urges their consumers to read the technical specifications and application method before using scale removers.