Safe Acid Descale Powder
Product Description | Product Application | Product Notes| Product DOSE
Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and.
Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage.
- Non-combustible solid
- Also can be use for removal of loose corrosion products, Organic Foulant, And deposition of clay and SILT deposit.
- Biodegradable chemical compound without FUMES increases its popularity and also makes it EASY to HANDLE.
Scale and Rust Remover (Powder)
RXSOL-54-1008-025 is a dry acid cleaner formulated to remove rust and scale deposits from boilers, diesel engine cooling water systems, condensers, evaporators, calorifiers and heat exchangers.
This product is compatible and suitable with aluminum, copper, zinc, galvanized metals, steel boilers etc.
Powder Acid for Removal of Scale and Rust
Code: RXSOL-54-1008-025
Other Equivalent Brand
Lime Out Powder, Saf-D Scale Powderd Acid Cleaner, Eazy Safe Acid, RUST AND SCALE REMOVER DRY ACID, Part No.651571646, Maxclean-05, RXSOL79116, UN 2967, Alpha P-scale, MSSAFE ACID, Descalex Powder, Careclean Descalex
Short Description:
Scale dissolver. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage.
Generic Name: Descaler Powder
Information:
An acidic cleaning powder with a sulphamic acid base and a corrosion inhibitor that is particularly effective for removing calcium carbonate and other inorganic scale deposition. We are manufacturing this product with various colour code indicator to get proper uses and actual dose requirement by understanding change of colour during cleaning operation.
Active Matter: 95-99
IMPA Code: 551408
Safe Acid Descale Powder
Application:
APPLICATION : Boilers, Calorifiers, Heat Exchanges, Diesel Engine Cooling system, Condensers, Evaporators & other type of equipment where rust & scale form. Appearance Reddish
APPLICATION : Boilers, Calorifiers, Heat Exchanges, Diesel Engine Cooling system, Condensers, Evaporators & other type of equipment where rust & scale form.
| Appearance | Reddish / Yellowish / white – Powder ( without indicator ) |
| Density | 1.2g/cm3 |
| pH | (10 wt %):1.1 |
| Compatibility |
| Metal | Suitable aluminium, zinc, tin and their alloys. Stainless steel, Carbon Steel, Cast Iron, Titanium, Copper , Copper alloys, PVC, Plastic , Rubber | Rubber | No known effect |
| Rubber | No known effect |
Using Procedure:
Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection This is mixed with fresh water 3 to 20 percent.
Suitable and very popular product for DESCALING of high and low pressure boilers, Heat EXCHANGERS etc. Its corrosion inhibitor blend PROVIDE metal protection
This is mixed with fresh water 3 to 20 percent depending on deposition of scaling. After using SA-1008, sense all metal surfaces with 0.5 percent of RXSOL-54-1008-025 at least 2-4 house , up to neutrial of PH valve.
Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised solutions can be re-activated by adding more RXSOL-54-1008-025 until the red colour reappears. This should not be done more than twice. RXSOL-54-1008-025 should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.
Fields: Descaling of Boilers, Descaling of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descale Powder.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025 in sea water. After use of RXSOL-54-1008-025 a 0.5% solution of Alkalinity Control in fresh water should be used for neutralization.
Evaporators, Calorifiers, Heat Exchangers:
The strength of the acid can be enhanced by adding 1 part sodium chloride (common salt) to 20 parts of Descale Powder. This enhancement of the cleaning solution, however, should not be used when descaling diesel engine cooling water systems. After use of Descale Powder a 0.5% solution of Alkalinity Control in fresh water should be used for neutralisation.
Note:
Characteristic: -Powder product-safe and easy handling and storage. -Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors -protect metals. Re.
Characteristic:
-Powder product-safe and easy handling and storage.
-Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors
-protect metals. Requires no heating unless its activity is required to increase fast.Contains anti-foam agent .
-Colour indicator shows solution strength.
-Removes scale from boilers.
-Removes scale from Diesel Engine cooling systems.
-Removes scale and rust from Condensers, Evaporators,Heat Exchangers etc.
Technical Specifications:
PRODUCT PROPERTIES :
| Appearance | Reddish / Yellowish / white – Powder ( without indicator ) | |
| Density | 1.2g/cm3 | |
| pH | (10 wt %):1.1 | |
| Compatibility | ||
| Metal | Avoid aluminium, zinc, tin and their alloys. Avoid galvanised surfaces | |
| Rubber | No known effect | |
| Packaging | Order No.: RXSOL-54-1008-025 | Size (in kg)25, 5, 20 |
Safe Acid for flushing HVAC
Time to time cleaning and removal of contamination from refrigeration and air conditioning systems is a wise decision to stop failures and increasing the efficiency of HVAC SYSTEM . The most common such failure is a compressor burnout. During such an event, the refrigeration system becomes contaminated with large quantities of disintegrating particulate, sludge, acids, carbon residues, and possibly moisture. All of these contaminants must be removed before the system is returned to duty.
When flushing a system:
Do not inject the RXSOL SAFE ACID Powder Product Code RXSOL-54-1008-025 into the compressor itself. In fact, the compressor should be removed or bypassed. Only the supporting refrigeration system should be flushed.
Large systems should be disassembled and flushed each part and accessory section by section.
Required quantities of RXSOL SAFE ACID is completely depends up on degree and deposition of contamination
After Flushing If these components appear to be contaminated, Repeat the process.
EQUIPMENT REQUIRED
The following equipment is required for each flushing operation:
New canisters of flushing a typically soiled system.
An injection tool and standard refrigerant charging hose to inject the solution into the system. Ideally the solvent in the container must be visible, so it can be inspected during the flushing process. This enables a technician to determine when the solvent begins to run clean, indicating that the system has been thoroughly purged.
A tank of clean compressed nitrogen, regulated to 120-150 psig. This tank should be equipped with a dispensing hose and will be used to purge the solvent from the system.
A vacuum pump with the appropriate hoses and clamps.
Clean wipes or swabs to remove any residual oils or liquids that may drip or be spilled while purging the system.
Safety equipment; never flush a system without eye protection and rubber gloves. Convoluted piping in certain systems can cause momentary spikes in the solvent flow during the flushing process, resulting in erratic purges, which can splash into eyes and onto skin.
SPECIFIC INSTRUCTIONS
1. Confirm you have all the required components for the service as well as for the flushing operation prior to beginning.
2. If the system is still operational, remove the existing refrigerant and lubricant and disassemble sections so individual portions can be cleaned section by section.
3. Disconnect fully all of the electrical connection and Disconnect the old compressor and remove it from the system. Remove filter-drier cores. (If it is easier or more cost-effective, install a bypass loop around the filter-drier accumulators, etc.) On heat pumps, remove check valves and four-way reversing valves. Again, configure and install bypass loops.
4. Connect a waste container to a discharge port to capture the contaminated flushing Liquid, need to be captured for proper disposal.
5. Connect your charging hose onto the system to be flushed. Make sure openings upstream — except the discharge port — are closed. Connect the injection tool to the canister. It is a good idea to restrict the drain or discharge point, so that the flushing solvent is prohibited from passing through so quickly. This will improve the cleaning process.
6. When ready to inject the flush, connect the canister to the charging hose. Open valve on tool; the flush will start entering the system.
7. Discharging the flush should take approximately 10 minutes, depending upon temperature. Before the tank is empty, some small quantity of solution should begin to flow into the discharge container. Also, the canister has been designed to empty itself completely only when it is standing in an upright position. Do not attempt to flush the system with a canister inverted or on its side.
8. Using the compressed nitrogen tank, connect the tank to the system and blast it into the system behind the flush solution. The nitrogen will push the solution through the entire system, agitating it and “scrubbing” the inside of the system. Eventually, all of the solvent will flow into the receiving container on the other side of the system. In this step, it is recommended that the nitrogen be used at a low pressure at first, with the pressure being allowed to increase gradually.
9. Observe the solution being captured by the receiving container. If it is running clean and clear, the system has been successfully flushed. If the solution is murky or still contains particulate, flush again.
10. After Cleaning neutralize the entire system by using RXSOL ALKALINE CLEANER SAFETY Liquid RXSOL-20-2004-025, This will increase the shelf lif of all METAL parts and equipemt.
11. Make your repairs. Remove any bypass loops you installed. Tie in the expansion devices. Replace the filter-drier cores. Secure the system.
12. Evacuate the system to a low micron pressure range with the vacuum pump and leak-check the system. This will evacuate any residual liquid solution from the system. As the internal pressure drops, the solvent will boil into vapor and be removed from the system. Time for pulling the vacuum should be approximately 15 minutes for a 5-ton system.
13. As a final step, recharge the system with refrigerant and lubricants as recommended by the compressor or equipment manufacturer and the system instructions. Reconnect electrical and electronic connections. Test the operation of the system. Wipe down the system, leaving the work area neat and clean.
14. Refer MSDS of the product before USE.
Safe Acid Descale Powder manufacturer and supplier in Mumbai, Kandla Kolkata, Haldia, Paradip, Chennai, Ennore, Visakhpatnam, Gangavaram, Surat Gujrat, Fujairah Sharjah, Ajman, Abudhabi, Dubai UAE Middle East, Muscat Barka Sohar Oman, Nairobi Kenya Africa, Canada, Sudan, Nairobi Kenya Africa, Yemen
Packing Size: 25.00 Kg.PWD
Available Packing Size:
Descaler Powder 5, 10, 20, 25, 50 Kg jar . Suggestion ::: Our daily descaling works helps to share helpful tricks to dissolve hard scale easily, Always use 5-10 % our new generation hard scale deposit remover powder RXSOL-11-1102-025 . Addition of RXSOL-11-1102-025 helps to clean 100% scale from system .
Article News:
Lime scale remover supplier in Ulhasnagar, Kalyan, Descaling chemicals supplier in Elamkulam, Cochin - India, Oil Filed Maintenance Chemicals, Cold wash importance during Descaling, Marine Maintenance ship cleaning detergent chemicals, Hydrochloric acid replacement in indoor area, Descaling Chemicals supplier in Palghar VIRAR,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride