RXSOL Ballast Tank Cleaner
RXSOL-23-2005 is used for cleaning ballast tanks and reducing the amount of sludge and mud in the Ballast tanks. It is combination of various organic compounds, sludge conditioners, scavengers of oxygen and surfactants all molded into a single liquid based cleaning solution. Thus the cleaner removes all traces of oil, grease and dyes from the tank.
Generally a ballast tank is a compartment within another floating device that holds water and controls the flow in or out. Due to constant contact with water, there is always a chance of heavy sedimentation inside the tank which can be cleaned by solutions such as the RXSOL Ballast Tank Cleaner. Ballast Tanks are used in ships, submarines and other floating devices.
The solution contains a precise pH value so that the Ballast tank gets cleaned spic and span. The RXSOL Ballast Tank Cleaner has a high effectiveness in cleaning. It has a long shelf life. A concentrated fluid is present inside the container; this can be diluted as per requirement and used for protection against rust and corrosion. Since a ballast tank has to deal with many chemicals this alkalinity control is completely chemical proof, which is no matter what chemical is added, the result will never be futile. The solution has a mechanism that controls the rusting and corrosion by keeping the pH level of the acidic water constant.
It provides the relative alkaline control mechanism inside any Ballast Tank. Water soluble solution can be applied very easily into the tanks. The liquid itself has a blackish hue and the density measured is 1.1 gram/milliliter at a temperature of 15C. Metals such as aluminum and zinc galvanized steel. However no effect on rubber has been discovered. It is used specifically in wing tanks, double bottom tanks, fuel oil tanks for the purpose of gas freeing and degreasing.
RXSOL Ballast Tank cleaner is easy to handle and use. It prolongs the life of the machinery as it inhibits corrosion and scale. It is very much economical, as a little amount can be used to make a large solution. The solution is used for all pressures (high, medium and low). Friendly with metals such as steel, copper, aluminum as well as non-metals such as gasket, hoses, pipes, rubbers, rings etc. It coagulates small amount of oils in the Ballast tank so as to give a shiny appearance. Moreover, it also prevents adherent sludge deposition inside the walls of the tanks.
The dosage can be calculated by knowing the composition of the deposition and the nature of the mud to be removed. However estimated values put it somewhere between 0.5% to 2% solutions by volume. However these are subject to change if anybody feels the amount must be changed to suit the needs of the ballast tank. The solution helps disperse sediments and mud form the Ballast tank and removes the collective mud effectively.
Why to opt ballast tank cleaner from Rx Marine?
Over the period of more than 20 years Rx Marine has ballast tank coating chemicals with great excellence which is employed in various industries as well as households. These products manufactured are basically non toxic as result they are less hazardous as compared to other chemical products available in the market. They are available for all queries to guide you through choosing the right product for your need and even follow up or are ready to hear your grievances even after the sales are over. The products come with proper handling instructions and are eco-friendly. The transparency in the dealings and economically priced products has made them one of the top suppliers of chemicals.