Lube Oils Cleaner easily handles complex grease deposits
Every industry, whether big or small, faces several challenging contamination issues in its lifetime. Right from a simple grease stain to complex contaminations, these deposits need a powerful cleaner that cleans without leaving behind any residue. Lube Oils Cleaner is one such multipurpose product that can effectively handle different simple as well as complex contaminations and grease deposits. It not only removes lube oil and oil mixed with hard deposit such as lime and scale, but also cleans deposits from products such as glycol. The product is effectively used in the industry to clean lube and fuel oil separators, lube oil tanks and pipe systems, heat exchangers and other machinery parts.
The product has a simple application procedure and can be used for manual cleaning or cleaning in place with specified equipment. A biodegradable product is non-flammable and does not contain any nonyl phenol ethoxylates or any other estrogenic compounds. It is a powerful cleaner that removes the toughest of tenacious deposits without leaving any film or residue. It is apt for using on metal surfaces along with any type of separator discs. The cleaner is tested and approved by Marinfloc and is self-splitting. It allows for cleaning if discs without the need of dismantling the separator which reduces down time and saves money. It is a colourless o yellow liquid with a characteristic odour and is completely soluble in water.
Often industries have been changing oil simply because it is loaded with contamination. In the process, there is a huge wastage of a good product, which is simply contaminated that can be easily removed with the perfect cleaner. Lube Oils Cleaner is an investment that is economical as well as reduces running costs. It can not only increase the working life of industrial lube oils but also extend the life of the machinery by reducing wear and enhancing operating conditions. The product can decrease the amount of oil being disposed of by the industry and make it more economical, thus reducing pressure on the environment and increasing uptime.
There are generally two ways of using Lube Oils Cleaner. In the manual cleaning system for the separator and machinery parts, a solution of 5-20% concentration is to be prepared, depending upon the contamination of the tan and the equipment. The solution needs to be kept for a minimum of 2 hours to effect on both oil and lime. After the elapsed time, the tank or the equipment needs to be cleaned with high pressure rinsing or brushing.
Another method for cleaning in place of separator requires a solution of 20% concentration to be prepared if lube oil separator is to be cleaned. For cleaning of fuel oil separator, a stronger solution of 10% is to be made. A recommended cleaning temperature of 70-90 degree centigrade would make the cleaning effective. A continuous cleaning cycle that would last from 1-3 hours depending upon the contamination level and character is advised. For hard deposits, the cleaning process can be repeated with a new cleaning fluid.
Rx Marine provides usage and safety instructions with all its products. Do read the instructions carefully before working with the product. Always keep the product away from direct sunlight and use it as directed. Always use proper protective gear when working with any chemicals.