Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

Tankclean ECO

Tankclean ECO
SKU
RXSOL-20-2035-210
Supply Location::
Locations

Tank clean ECO supplier in Mumbai, Nhava Seva, Surat - Hazira, Kandla - Deen Dayal Port, Mundra, Sikka, Jamnagara, Hazira, Gandhidham, Manglore, Goa, Visakhapatnam - Gangavaram, Chennai - Ennore, Kolkata - Haldia - Buz Buj, Paradip. We are also one of largest tanclean ECO supplier in Fujairah, Dubai, Sharjah, Abu Dhabi - Middle East, UAE, Sohar, Muscat Oman


MUSCAT CHEMICAL TAG::
Category
Variations

HEAVY DUTY TANKCLEANER MANUFACTURED FROM NATURAL RAW MATERIALS WHICH CONTAINS NO CHLORINATED OR AROMATIC HYDROCARBONS
• More effective than solvent cleaners.
• Non-toxic and environmentally safe.
• Safe to use because of its high flashpoint.
• Completely biodegradable.
• Replaces most conventional tankcleaners and cleaners.

Remarks
During Tank Cleaning operation, Re-circulation method can be considered one of POPULAR METHOD. TIPS for uses of TANK CLEAN ECO.
 1. First of all remove and strip all residue manually from Tank bottom and wall, Then flush tanks with the copious amount of seawater if possible by using the high-pressure machine to remove remaining cargo to slop. (As per MARPOL 78/73)
 
 2. Then recirculate hot water inside the tanks at least for 2-10 hr, this will helps to remove oily-mud and residues in the coating/steel.
 
 3. Then again take fresh hot water inside the tank and use Tank Clean ECO 0.5 - 2 %. And continue recirculation 2-8 hr. And continuously try to maintain temperature of 60 - 65 Degree Centigrade. Hot recirculation will improve the cleaning result. Do not overheat, as this may burn the cargo. otherwise, The water is heated by means of the heating coils, cargo heat exchanger or Butterworth heater.The tanks are washed by means of a loading pump, after which the solution used is recycled to the mixing tank. One solution is most often used to wash 1 – 4 tanks.Tankclean ECO must be recirculated as a 0.2 – 0.5 % emulsion (dependent on the nature of the contamination). Allow this emulsion to circulate for 2 – 4 hours at the temperature of 10-60 °C (depending on the type of cargo).
 
 4. Again Flush entire tanks with a large amount of warm seawater (2-3 hr) to remove any residues of Chemicals.
 5. Flush tanks with freshwater to remove salts, mop and dry.


RXSOL TANK Clean ECO is added to a mixing tank containing sufficient quantity of water in order to obtain a good recirculation.
 
Tag Identification
Expert suggestion: To save tank cleaner,  strip all residue manually which will reduce the quantities and consumption of chemicals required. Never overheat the tank which may cause dryness of residue.

Spot cleaning after most CPP / hydrocarbons.
  1. Tank Cleaner Eco may be sprayed on the bulkhead neat or diluted, to areas where residues remain after tank washing, “Spot Cleaning”. A heated dilution is found to be very efficient.
  2. The product should be allowed to stand for 10-30 minutes prior to re-washing areas. Do not leave the product to dry on the bare coating.
 3. Clean areas by flushing manually with high pressure, using fresh water, or by performing a re-circulation. For persistent deposits, agitation by scrubbing will assist the cleaning operation. Heated water will increase the cleaning effect.
Note
Description
Tank Cleaner Eco is “the strongest there is” water-based, non-caustic cleaning and degreasing agent. It is based on
the latest and most powerful biodegradable surface-active and emulsifying agents. It contains fatty alcohol ethoxylates metasilicates and complexing agents. It works well in hard, soft, ambient and hot water. It is ideal
for soot removing and cleaning of extremely dirty tanks after Mineral Oils/Petroleum Products. Note. All cleaning
chemicals have reduced effect with seawater.
Product benefits, Application & Features:
• Non-Flammable • Suitable in sea & fresh water
• Leaves no film in the cargo tanks • Biodegradable
• Easy to apply. Effective and economical in use • Contains no ethoxylated nonylphenol (NF)

Properties:
Specific gravity (at 20°C) : 1.05
Flash point (10%)            : Non Flammable
pH (10%)                         : 12.0 - 12.5
Colour                             : Clear
Odour                              : citrus

RXSOL Tankclean Eco is designed for the removal of heavy mineral oils and greases, dopes, additives, lubricants, asphalt, distillation residues, coal tar, several synthetic resins, paraffines (e.g. slackwax), inert gas soot, vegetable,fish  and animal oils and fats, fatty acid and greases, crude palm oil, styrene, palm fatty acids.
 

Tank Clean ECO is one of popular and classified marine Tank Cleaner.  TANK CLEAN ECO is a highly concentrated natural based cargo tank cleaner. It is free from chlorinated/aromatic hydrocarbons, caustic and alkalines. It can be used for the cleaning of palm oil, vegetable oil, fish oil and soybean oil from cargo tank surfaces.

Directions of use
Cleaning of cargo and storage tanks by means of recirculation method.

Pre wash :-
Before cleaning with RXSOL Tankclean ECO, it is necessary to prewash the tanks with hot or cold water, depending on the type of cargo.

Recirculation method ::: Refer Below.

Direct Injection:-
Inject 0.1 to 0.2 litres of Tankclean ECO per every 100 litres of water into the washing system.Maintain cleaning temperatures between 10-60 °C (depending on type of cargo).Cleaning time 2 to 6 hours, followed by thorough rinsing with fresh hot water.

ZINC coating TANK cleaning - Zinc structure is porous, a prolonged pre-cleaning with lower temperatures is highly advisable.
Tankclean ECO effectively cleans vegetable, animals, and fats.  Tanks containing drying or semi-drying oils should be flushed or prewashed or moisten as soon as possible after completion of discharging to prevent the formation of hard tenacious residues.

Copyright © 2021 Powered By RXMARINE - All Rights Reserved