SHIP CARGO Tank Cleaning Chemicals Detergent - DYE REMOVER-ORG DICHLOR manufacturer and supplier in India UAE Oman Nairobi Kenya. DYE REMOVER-ORG DICHLOR supplier in Mumbai JNPT, Mundra Kandla Gandhidham, Hazira Surat, Kolkata Buz Buz Haldia, Paradip, Visakhapatnam VIZAG Gangavaram, Chennai, Ennore Kakinada in India and Fujairah, Dubai, Sharjah, Ajman, Abu dhabi Gulf, Muscat Sohar Barka Oman, Yemen, Qatar, Mombasa
RXMARINE CHEMICAL TAG::
Remove color from cargo tank surfaces. Also acts as superior quality cleaner / degreaser with high penetrating abilities to remove color from cargo tank surfaces. It is particularly effective when loading color sensitive cargoes such as methanol, isopropyl alcohol, styrene monomer, and ethylene glycol "fiber grade."
RXSOL ORG DICHLOR is a Mixture of Emulsifier, new technology alkaline REDUCING agent , And its blend of Corrosion inhibitors, Rust preventive makes it unique and better among all product available in market.
Use a strainer at the pump stack when circulating any solution.
Tank Lining – Stainless / Zinc / Epoxy / Phenolic (Extreme care must be taken if product other than bleach substitute is to be used in any coated space).
**These products become more aggressive with temperature increase, and should not be allowed to dry on tank walls or stored in cargo tanks as cleaning solution or slops.
ORG DICHLOR Bleach will –
Remove odors.
Remove color.
Improve permanganate time.
Spraying – Following rough washing to a good Water White or better, apply dilute RXSOL ORG DICHLOR to 1 – 3% strength. First wet the tank surface (spray with DI water), then spray all over with Bleach, wait 30 minute (but do not allow to dry) and then rinse very well with DI water, including the tank top towards the sump. To ensure that you have covered all areas properly, this process should be carried out at least twice with good DI water.
Injection– no.
Re-circulation– Following rough washing to a good Water White standard or better, apply dilute RXSOL ORG DICHLOR to 1-3% strength. Mix sufficient Bleach with fresh water in the tank and heat this mixture to 40 – 50 0 C, circulate through the drop line if fitted and than circulate through butterworth machine for 3 hours. After re-circulation immediately warm butterworth to (500 C) the tank for 3 hours at maximum pressure, increase the water temperature to 80-85 o C after 45 minutes. Check (by smell) that there is no Bleach remaining, then fresh water rinse and dry.
** When there are a number of tanks requiring re-circulation, it may be significantly more efficient to make up a large batch or number of batches that can be transferred on between tanks as required.