Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

Advance Tankclean

Advance Tankclean
SKU
RXSOL-20-2084-210
Supply Location::
Locations

Advance Tankclean Marine Chemicals manufacturer and supplier in Mumbai - MIDC, Turbha Pawana, Kandla - Deen Dayal Upadhya, Gandhidham, Mundra, Sikka, Vadinar, Chennai, Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Paradip, Buz Buj, Fujairah, Dubai, Sharjah, Abudhabi, Ruwi Barak Ghala Muscat - Oman, Sudan Yemen, Canada, Hazira Surat


MUSCAT CHEMICAL TAG::
Category
Variations

This product is very common to use for removing of traces HYDROCARBONS from the tank, after cleaning of TANKS from solvent base tank cleaning materials. when possibilities of next cargo will contaminate with hydrocarbon.

Advance Tank cleaner is a biodegradable product with an exceptional solvency power. It is blend of  Biodegradable natural solvents and emulsifier.which minimizes the extreme hazards to personnel in handling materials . It is specially formulated for tank cleaning and Hydrocarbon freeing applications after cleaning with solvent based cleaners like Sea-cleaner, New Org, Cold wash. Advance Tank Cleaner is suitable for most of the tank coatings. 

Remarks
  • Non-flammable.
  • Free from hydrocarbon solvents.
  • Effective and economical in use , Water-based cleaner.
  • Non-corrosive to ferrous metals.  Suitable for all tank-coatings.
  • Can be used for gas and hydrocarbon freeing of tanks.
  • Can be used for deodorizing
  • Contains wetting agents.
Tag Identification

Popular Bio catalyst based tank cleaner.

Note

RXSOL-20-2084-210 is a balanced formulation of emulsifier and natural solvent detergent agents which makes excellent for use with all types of metals

  Concentrated to save you money
• Biodegradable and readily disposable
• Penetrating wetting power to save you time

The most important feature of Advance Tankclean is Splits after cleaning, releasing the oil phase for reclamation. The microemulsion-based formulation that combines the performance of a water and solvent based product into one low toxic product.
 

Odour

Characteristic odour Sweet orange

Appearance

Clear Liquid or Greenish Colur , Soluble in water

pH

7.5 - 8

Boiling point

100 °C at 760 mm /Hg

Vapour pressure

not known

Freezing point

<0 °C at 760 mm/Hg

Completely soluble in water

Specific gravity (water=1)

0.99 to 1

Effectively Water-based degreaser which is free from nonylphenol ethoxylates. Advance Tank cleaner is Non-flammable
Advance Tank clean supplier and stockist at all Indian and UAE - Middle East Coastal. Advance Tank Clean is free from any kinds of hazardous solvent and alkali mixture emulsifying oils particle and makes water soluble to remove from zinc-silicate coated tanks surface. Also effectively cleans metal castings, forgings and stampings, industrial parts, tanks and reactors. Very effective to clean Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents. Suitable for cleaning engine components like fuel and lube oil filters, injection nozzles, pump components, inlet and exhaust valves etc.

After uses of solvent type cleaner to make Hydrocarbon free tank, RINSE the tank Throughly—preferably with running continuous water. For critical Tank cleaning, Make a fresh 1% solution of Advance Tank cleaner in cold, warm, or hot water. If available use warm water. For difficult soils, raise water temperature and use more detergent.

 
Otherwise for Spot Cleaning: Spray  Advance Tank cleaner directly or it can be diluted up to 5 parts, And leave up to 30 minutes to complete the reaction then finally flush off with water. Always remember  do not allow to dryon surface, then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.

Re-circulation Method:–

Fill tank with fresh water and heat up to warm 30-40oC .  Then start adding Advance Tank cleaner 0.03 to 9% ( for general wash use 300 ML for 1000 Ltr water and ratio can be increase upto 9 Ltrs for 1000 Ltr water )  to circulate the water.   A stronger solution can be made for critical cleaning. Finally lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. Use a strainer at the pump stack when circulating any solution. Finally rinse the tank with hot water.

 

Advanced Tank cleaner is one of popular MARINE TANK CLEANING product.

Tank Lining – Stainless / Epoxy / Phenolic / Zinc Coating

Copyright © 2021 Powered By RXMARINE - All Rights Reserved