Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

MembraneGuard MG 11 Silt Remover

The high pH formulation MembraneGuard MG 11 Silt Remover was created especially to remove silt, organics, and other particle deposits from polyamide. Thin film composite membrane with polysulfone surfaces. This cutting-edge, extremely potent powder has the subsequent characteristics:

  • pH was set at 10.0 + 0.5.
  • Extremely efficient at room temperature
  • Is easily washed and has no surfactants
  • Contains chelating agents and detergent builders or pH buffer
Remarks

Note

Spiral Wound Membrane

Membrane Diameter in inches

 

Flow rate in ltrs/min

 

4 23
6 53
8 91
10 114
12 204

 

Hollow Fiber Membrane

Membrane Diameter in inches

 

Flow rate in ltrs/min

 

4 19
8 57
10 76

 

To avoid the removed solids from redepositing, the first return flow—up to 15% of the cleaning tank volume—should be routed to the drain in cases of severe fouling. For multi-pass systems, cleaning each pass independently will get the greatest results. If the removed material causes the solution to become turbid or discolored, it should be thrown out. Before cleaning more passes, a new solution needs to be made. Before putting the system back in service, rinse it with permeate.


All polyamide, polysulfone, and thin-film composite membranes can be used with MembraneGuard MG 11 Silt Remover. It can be used at any temperature up to the highest that the membrane manufacturer recommends, starting at 15°C (60°F). Twenty-five grams of MembraneGuard MG 11 Silt Remover are diluted with one liter of water as the standard.

RXSOL Brand is popular as a water treatment chemicals Company in India, UAE, Oman, Nairobi, and Sudan. Some of our water treatment chemicals RAW MATERIALS product list.

1 Cyclohexylamine CHA 108-91-8
2 Morpholine MORPH 110-91-8
3 3-Methoxypropylamine MOPA 5332-73-0
4 N,N-Diethylhydroxylamine   DEHA 3710-84-7
5 Hydrazine Hydrate HH 10217-52-4
6 Carbonyl Dihydrazine CBDH 497-18-7
7 Acetone Oxime DMKO 127-06-0
8 EDTA-2Na EDTA-2Na 6381-92-6
9 EDTA-4Na EDTA-4Na 10378-23-1
10 2,2-Dibromo-2-Cyanoacetamide DBNPA 10222-01-2
11 Benzalkonium Chloride BAC 63449-41-2
12 Polyhexamethylene Guanidine PHMG 57028-96-3
13 Sodium Bromide NaBr 7647-15-6
14 Polyacrylamide PAM 9003-5-8
15 Sodium Molybdate SUMO 7631-95-0
16 Sodium Tripolyphosphate STPP 7758-29-4
       

Water Treatment Chemicals supplier in your city nearby you in your COUNTRY INDIA, OMAN, UAE, NAIROBI

Dosage: 25 gm per ltr of water

How to use MembraneGuard MG 11 Silt Remover:

  • Add RO permeate to the cleaning tank.
  • Add 25 grams of Floclean MC11 gradually for every liter of available cleaning tank space.
  • The cleaning solution can be heated to increase cleaning efficacy.
  • Use a mixer to thoroughly mix the solution or run it through the cleaning pump.
  • Adhere to the temperature restrictions set by the membrane manufacturer.
  • For one hour, follow the flow rate suggested by the membrane or system manufacturer and circulate the solution through the membrane bank in the feed direction.

The following recommendations may be followed in the event that the manufacturer's advice is unavailable.

RO Membrane Silt Cleaner manufacturer INDIA,RO Membrane Silt Cleaner manufacturer UAE, RO Membrane Silt Cleaner manufacturer OMAN

Copyright © 2021 Powered By RXMARINE - All Rights Reserved