STICK N SOL - Removing Label - Sticker Remover Gum Dissolver manufacturer and supplier in Mumbai, Visakhapatnam, Kolkta, Chennai, Gandhidham, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, UAE Middle East, Oman Muscat, Barka Sohar, Kenya Nairobi, Jinja, Uganda, Canada
MUSCAT CHEMICAL TAG::
REMOVING LABEL ::: very effective to remove sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass, Cleans and removes adhesive caulking and bedding compounds, Cleans glue residues, resin, and hardener.
Fully active cleaner specially formulated for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor performance. Field test have shown that RXSOL-15-1017 is very gentle with personnel and on metallic colour surface.“RXSOL-15-1017” should always be used at full strength to obtain maximum benefits.
RXSOL-15-1017 is a unique formulation of powerful surfactants and organic solvents.It does not contain any chlorinated solvents of Phenols & has less than 10% Aromatics & surfactants in the product do not contain any alkyl phenol ethoxylates.
Trick :: Before peeling off the label, use a hair dryer to soften the adhesive. The label will probably come off cleanly, but if it leaves a sticky residue, wait for the piece to cool and try removing it with some RXSOL-15-1017 on a soft paper towel or cotton ball. Any residue remaining after using RXSOL-15-1017 should be removed with RXSOL Multi-Surface Cleaner with Vinegar.
Email Tempelate ::: http://www.kirantiwari.com/sticknsol/index.html
Same Family PRODUCT ::: http://www.rxmarine.com/BIOSOL
Safety And Handling:- “RXSOL-15-1017” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply.Avoid contact with eyes as irritation may occur. Do not take internally in case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Characteristics:-
- Unique chemical formulation.
- Non- toxic.
- Extends time between cleans.
- Safe to handle.
- Effective removal of STICKER/CARBON DEPOSITS.
- Can be applied by all normal methods.
- Formulated to be very cost effective.
- Does not contain chlorinated hydrocarbons.
- Can be used on all metals & most painted surfaces.
- Environmentally friendly.
- Non-Corrosive.
- 100% Active.
- Dries Completely.
- Does not require special feeding equipment for safe application.
- Reduce downtime and maintenance costs.
Product Properties:-
|
Product Name |
STICNSOL (Wetting EmulsifyingAgent ) |
|
|
Active Matter |
100% |
|
|
Consistency |
Liquid |
|
|
Emulsifying Property |
Good for emulsification of Oils , Gum , Wax, Greases , Polymer & Solvents , TETRA CHLOROETHYLENE ( PC ) |
|
|
Wetting Property |
Good Wetting & Emulsifying Property |
|
|
Ionic Nature |
Non-Ionic |
|
|
Colour |
Pale Yellow |
|
|
Appearance |
Clear liquid |
|
|
Odour |
Pine based |
|
|
Moisture |
0.5 % (max) |
|
|
Density |
In g/cm3 at 15°C: 0.89 |
|
|
Flash Point |
(PMCC)°C: Above 63 |
|
|
Compatibility |
|
|
|
Metal |
No known effect |
|
|
Rubber |
May swell |
|
|
Synthetic rubber |
May swell |
|
|
PACKAGING |
Order No |
Size (in litres) |
|
|
RXSOL-15-1017 |
5,25 , 35 |
Product Uses:-STICK-N-SOL “RXSOL-15-1017” is a fully active cleaner specially formulated for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor performance. Field test have shown that “RXSOL-15-1017” is very gentle with personnel and on metallic colour surface.“RXSOL-15-1017” should always be used at full strength to obtain maximum benefits.
Product-Application:- Manually apply “RXSOL-15-1017”neat by brush or hand spray. Allow few seconds contact time to penetrate the soiled / covered area, then sticker will come up by smooth way.
Cleaning time will vary depending on the extract nature and thickness of deposit to be removal. Stubborn deposits should be scrubbed to assist the cleaning operation. Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
Also suitable for cleaning for PU , VINAYLE, NITROCELLULOSE & POLYAMIDE based inks. And easily dissolves spillage of inks on surface.