Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

Heat Transfer Liquid PROPYLENE Glycol

Propylene glycol inhibited with the corrosion inhibitor resulting corrosion protection, as well as efficient heat transfer, in water-based, closed-loop heating and air-conditioning systems. The fluid is dyed bright yellow to facilitate system leak detection.
Note
PROPYLENE GLYCOL supplier and exporter. Experts suggest in Airstack Chiller mixing of propylene glycol with water always be beneficial. Mixture in recirculating chillers is beneficial whenever the coolant temperature set point is below 10°C (48°F)

 

Main Ingredients   : PROPYLENEGLYCOL (1,2-) 94%
Inhibitors and
water
 
6
Inhibitors and water
: 6 %
Colour Bright : Yellow
pH of solution : 9.5 - 10.5
Odour            : PRACTICALLY ODOURLESS
Solubility in water        : SOLUBLE
Density        : 1.053 at 60 oC
Boiling point         : 187 oC
Melting point       : -60 oC
Viscosity     : 58.1 cp at 20 oC
Reverse Alkalinity         : Minimm 15.0 ml
Vapour pressure    : .07 mbar at 20oC
Skin absorption/irritation       : YES
TLV       Country     :  
Pollution category    1994       : III
 

 

Glycol characteristic is to transfer heat from one place to other, due to that water-miscible glycol based coolant frequently used in heat transfer and cooling applications. Addition of Propylene Glycol in water enhances heat transfer parameters than water.
This Inhibited  Propylene glycol heat transfer fluid has an operating temperature range of -50°F to 325°F; with fluid freeze protection to below -60°F, and system burst protection to below -100°F. 
 
This fluid is specially formulated for HVAC systems to keep pipes free of corrosion without fouling.
 
 
This fluid is recommended for use in applications where low acute oral toxicity is important or where incidental contact with drinking water is possible.

Copyright © 2021 Powered By RXMARINE - All Rights Reserved