Electrosol NF Motor Cleaner

SKU

RXSOL-16-1076-020

Supply Location::

Locations

Electrosol Electrical Parts Non Flammable Cleaner Manufacturer and supplier in Mumbai, Gandhidham, Chennai, Ennore, Visakhapatnam, Manglore, Kolkata, Haldia, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, UAE Middle East, Ruwi Ghala, Barka Oman MUSCAT Sohar, Sudan, Yemen, Nairobi Kenya, Canada

RXMARINE CHEMICAL TAG::

Category

Deck cabin galley Maintenance-25

Variations

Electrosol NF Motor Cleaner

Excellent Cleaner for Electric Parts - Electrosol NON FLAMMABLE

Electrical Non Flammable Contact Cleaner is a specialized non-flammable cleaning solvent specialized to clean Electrical Equipment. A well balanced blend of non-chlorinated degresol Having super Degreasing power with surfactants which eliminates Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment. It provides immediate and efficient removal with a high evaporation rate.

Remarks

Excellent Electrical / Electronic Panel cleaner and degreasing chemicals to removes residues of oils, greases and machine coolant from machined parts, castings, panels and electrical/electronic components

RXSOL-16-1076-020 Electrosol NF Motor Cleaner Designed to provide a versatile degreasing solution for all manufacturing, maintenance, inspection and surface preparation needs

RXSOL-16-1076-020 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.

Tag Identification

RXSOL-16-1076-020 is also used in sensitive aerospace applications

Note

Characteristics :-

High dissolving and penetration action.
Excellent degreasing and emulsification power .
Safe on applied electrical insulation.
Non-corrosive. it is safe to use on painted or varnished metal surfaces.
Without chlorinated solvents.
To be used as an alternative to conventional electric cleaners

Product Properties
Appearance	Clear Colourless Liquid	Vapor Density : Heavier than air
Flash point	63°C (Closed Cup)	Stability : Very stable understandard, Normal conditions
Compatibility
Metal Plastic Rubber	No known effect No Known effect May swell	Note: After use the product must always be well sealed in the drum.
PACKAGING	Order No	Size (in kgs./lts.)
	RXSOL-16-1076-020	25, 50, 210 Lts

RXSOL-16-1076-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1076-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab, or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1076-025 . Never use RXSOL-16-1076-025 on a running generator or motor.

RXSOL-16-1076-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic . Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.

#Electrosol_ElectricalCONTACTcleaner

Either remove rubber and plastic parts from component or test on small area for any reaction before cleaning.

After cleaning motors or generators insulation resistance to ground should be tested to check that it is within its specified limits. Sprayers: a range of spray equipment is available for use with Electrosolv-E and other solvents.

Directions for use

RXSOL Electrosol must only be used in sufficient ventilated areas. RXSOL Electrosol should always be used undiluted. It can be applied by brush, swab or as a fine spray using suitable hand held spray equipment.

NOTE: Never open flame when using fine spray.

Small components be cleaned y brief immersion in a bath of RXSOL Electrosol. The most suitable way of applying RXSOL Electrosol is by using hand spray or syphon spray gun. Once the deposits of dirt and grease have been flushed away with RXSOL Electrosol the remaining solvent may be evaporated by using clean compressed air at low pressure and high volume.

DIP Cleaning Immersion Method is best for Small parts, While SPRAYING method is BEST cleaning method for Equipments and Parts Cleaning.

After Application and Cleaning of equipment, Wipe thorugh cloth or BLOWN the air for fiew minutes till DRY.

Never use ELECTROSOL on a WORKING AND Running Motor / Generator area.

USE Electrosol concentrated form only, Never Dilute before application.

Useful to clean all electrical parts and equipment components. Avoid to use on rubber and plastic.

Use in Well Ventillated AREA.

Never USE flame, during usage of ELECTROSOL Electrical Contact Cleaner.

Advanced formulation to clean sensitive equipment or components.

Company Info

RX MARINE INTERNATIONAL is a manufacturer and distributor that specializes in providing custom solutions. Wheather it is private labeling, custom packaging, chemical manufacturing or product sourcing, we have the team in place to make business with us as simple as possible. we provide excellent products and service to markets. Our customer located world wide.

We have sold over a million Ltrs of RXSOL products without a failure. We put this down to the fact that, as manufacturers, we have total control of the raw materials we use and our manufacturing process. Many of our competitors source their tankcleaner form third parties abroad and cannot stand by their products as confidently as we can.

Electrosol NF Motor Cleaner

Characteristics :-

Company Info

Recent Posts

Chemical Tag

Contact Us