Skip to main content
Email :rxmarinechemical@gmail.com
Contact: 91 08069976670,
91 08069976671 , 91 08069976672

ROCCOR OC RXSOL Liquid HD

Corrosion inhibitor specialized for OPEN COOLING SYSTEM named as ROCCOR OC RXSOL Liquid HD  while ROCCOR NB Liquid is specialized for closed cooling system.  ROCCOR OC RXSOL Liquid HD is free from metal content like chromates, zinc or other metals.  

Remarks
ROCCOR OC RXSOL Liquid HD product does not require additional acid treatment. 
ADVANTAGES of ROCCOR OC Liquid
Clean Surfaces  - Maximum heat transfer  -
Its regular doses increases Higher efficiency
ROCCOR OC RXSOL Liquid HD - Reduced Maintenance down time  - Increased production
Non Toxic  - Easy and Safe in use 
Tag Identification

Note
ROCCOR OC RXSOL Liquid HD compatible with nylon, neoprene or rubber jointings.  

ROCCOR OC RXSOL Liquid HD is a combined dispersant and anti-foulant and corrosion inhibitor which is specially formulated for the prevention of scale, deposits and corrosion in open fresh water, cooling systems. 
 
It is formulated from Polyphosphates, organophosphates and Polyacrylates. 
PHYSICAL CHARACTERICS 
Appearance   : Clear Liquid - Also available in PINK colour
Specific Gravity  : 1.10 to 1.20
Flash Point  : Non Flammable 
Freezing Point  : 0 Degrees Cent. 
ROCCOR OC RXSOL Liquid HD scientifically formulated to keep clean open recirculating systems  and also prevent from scale formation . Chemically ROCCOR OC RXSOL Liquid HD will disperse scale and corrosive products, silt etc and can be used as an anti-foulant along with other treatments.

Easy to fed ROCCOR OC RXSOL Liquid HD directly from the drum or from a stock dilution tank.  The slug feed method can also be used. 

ROCCOR OC RXSOL Liquid HD is highly concentrated cooling water treatment product, Its small dosage from 0.5 – 1 liter per 10 Tons of Cooling Water. The source of water also directly affecting its dosage as  The dosage depends on the quality of the supply water ( Total hardness and Chloride content as low as possible) .  Control is by simple colourismetric test. 

Optimum result of COOLING SYSTEM can be obtained by maintaing pH level 8 to 8.5 and Total phosphate level should be maintained between 20 and 30 ppm. 

Feel free to ask for RXSOL PHOSPHATE TEST KIT, RXSOL HARDNESS TEST KIT, RXSOL CHLORIDE TEST KIT. We are keeping full range of TEST KIT.


Copyright © 2021 Powered By RXMARINE - All Rights Reserved