TURBOCLEAN HeavyDuty Hydrocarbon Gas Turbine Compressor Cleaning Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen
MUSCAT CHEMICAL TAG::
The blend of Non-ionic surfactants, Hydrocarbon solvents, and many powerful heavy-duty ingredients for effectively on-line fired wash cleaning of gas turbine compressors. TURBOCLEAN HeavyDuty Hydrocarboncon is a concentrated powerful cleaner for the compressor section of industrial, Marine aviation gas turbine engines. TURBOCLEAN HeavyDuty Hydrocarbon also specialized in on-line fired wash cleaning of gas turbine compressors.
Appearance
Clear pale straw coloured liquid with a mild pleasant odour.
Solubility
Completely soluble in water. No agitation required.
Compatibility
Not corrosive or detrimental to any of the materials normally used in gas turbine engines or aircraft components. No adverse effect on synthetic turbine oils.
pH |
: |
7.5 - 8.5 |
Specific gravity |
: |
0.955 |
Total alkali metals |
: |
<0.5ppm after dilution |
Ash |
: |
<0.01% |
Flash Point | : | >65 Degree |
Solvent Content |
: |
> 55 |
Alkyl phenol ethoxylates |
: |
None |
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
pH |
: |
7.5 - 8.5 |
Specific gravity |
: |
1.01 |
Total alkali metals |
: |
<0.5ppm after dilution |
Ash |
: |
<0.01% |
Aromatic compounds |
: |
None |
Alkyl phenol ethoxylates |
: |
None |
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
pH |
: |
7.5 - 8.5 |
Specific gravity |
: |
1.01 |
Total alkali metals |
: |
<0.5ppm after dilution |
Ash |
: |
<0.01% |
Aromatic compounds |
: |
None |
Alkyl phenol ethoxylates |
: |
None |
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
pH |
: |
7.5 - 8.5 |
Specific gravity |
: |
1.01 |
Total alkali metals |
: |
<0.5ppm after dilution |
Ash |
: |
<0.01% |
Aromatic compounds |
: |
None |
Alkyl phenol ethoxylates |
: |
None |
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
pH |
: |
7.5 - 8.5 |
Specific gravity |
: |
1.01 |
Total alkali metals |
: |
<0.5ppm after dilution |
Ash |
: |
<0.01% |
Aromatic compounds |
: |
None |
Alkyl phenol ethoxylates |
: |
None |
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
pH |
: |
7.5 - 8.5 |
Specific gravity |
: |
1.01 |
Total alkali metals |
: |
<0.5ppm after dilution |
Ash |
: |
<0.01% |
Aromatic compounds |
: |
None |
Alkyl phenol ethoxylates |
: |
None |
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
pH |
: |
7.5 - 8.5 |
Specific gravity |
: |
1.01 |
Total alkali metals |
: |
<0.5ppm after dilution |
Ash |
: |
<0.01% |
Aromatic compounds |
: |
None |
Alkyl phenol ethoxylates |
: |
None |
Halogens (measured as total Chlorine) |
: |
<10 ppm for concentrate |
Gas Turbine Compressor Cleaning TURBOCLEAN HeavyDuty Hydrocarbon RXSOL solvent-based cleaners for effective Degreasing, Cleaning of oil deposits and Decarbonising the surface of gas turbine compressors. TURBOCLEAN HeavyDuty Hydrocarbon is SOLVENT based powerful cleaner where as water-based detergents are much less effective.
By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot wash that the cleaner should leave as little ash residue as possible to avoid blocking turbine blade cooling holes.
Mix One Part of TURBOCLEAN HeavyDuty Hydrocarbon with 4 PARTS of DI Water for On-line cleaning.