Metals Rust Clean Bright supplier in Gandhidham ( Kandla, Mundra, Sikka ), Mumbai ( Nhava Seva, JNPT, BPT, Navi Mumbai Maharastra ), Chennai ( Ennore, Tuticorin ), Vizag ( Visakhapatname, Gangavaram ), Kolkata - Haldia, Paradip. Fujairah, Dubai, Sharjah - Middle East - UAE, Canada
MUSCAT CHEMICAL TAG::
Metal Rust Bright MRB is heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited phosphoric acid. Metal Rust Bright MRB is a useful product in maintenance and cleaning sector. In the marine shipping industry, Metal Rust Bright MRB is used as a rust remover. Largest seller and supplier of Metal Rust Bright MRB in INDIA and Middle East.
Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner.
When cleaning aluminium, brass & copper flush with water upon completion of cleaning immediately
Warning : In case of contact with skin, wash immediately with plenty of water. Use chemical resistance PVC gloves for skin contact and also use face mask for eye and face protection.
Read the Material Safety Data Sheet before using this products.
Metal Rust Clean Bright at the low pH end effectively dissolves rust faster even more readily than the diluted one. In marine shipping industry, Metals Clean Bright is used as a rust remover. And For severely corroded and rusted surfaces and pickling of welding repairs, use 50% solution to neat. while For removal of rust stains on ceramic tiles, enamels, porcelain, glass etc., use a solution of 20–50%, depending on stains and soiling. Rinse off with water after 20–40 minutes.
Characteristics:-
• Non-flammable.
• Prevents further rusting.
• Economical, cost effective.
• Surface brightening
• Protects and maintains from corrosion
• Acts as rust proofing agent before the application of paints or coatings.
• It doesn’t affect rubber and plastic compounds
Note:- When cleaning aluminium, brass & copper flush with water upon completion of cleaning
|
Appearance |
Colourless liquid |
|
|
Density |
g/cm3 at 15°C: 1.2 |
|
|
pH |
10% solution 1.5-2.5 |
|
|
Compatibility Metal |
Concentrate and long touch may corrode. |
|
|
Rubber |
No known effect |
|
|
Packaging |
Order No:RXSOL-16-1011-020 |
Size (in litres) 25 , 35 |
For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.
MARINE - Rust Stain cleaner Metal Rust Bright
RXSOL-16-1011-025 ( Metals Rust Clean Bright ) can be used as a spot cleaner after cleaning fats and fatty acids , can be used on painted surface
A superior heavy duty and highly Concentrated liquid blend of surfactant & organic compound containing rust penetrating agent, solubilizer and inhibited phosphoric acid with ionic and non ionic emulsifier.
For polishing almost all metals, such as brass, copper, nickel, chrome, stainless steel, aluminium and even for machinery and golf clubs.
Metals Rust Clean Bright effectively gives detergency as well as rust stain removing cleaning action immediately. Many local brands defining Metal Rust Bright MRB as dilution of phosphoric acid to stand in the market and supply at a very cheaper price. Our continuous development and support of our R&D team enable us to produce a top-notch quality of Metal Rust Bright MRB. Since 1995 we make our self to keep on top then another brand who is supplying Metals Rust Clean Bright. Small drops of RXSOL Metals Rust Clean Bright chemically change rust causing elements in the inert atmosphere and RXSOL Metals Rust Clean Bright emulsifying detergent property cleans surface effectively and most important things safely. As during our long span of working time we observed that unbranded metal bright rapidly damaging smoothness of surface, So before selection and uses of Metal Rust Bright MRB from unknown sources think twice to save your precious metal surface. Principally before uses of any Acidic materials, its buffer action required. Strong ACID with Weak Base as well as a Weak ACID with a strong base. Buffer action of Metal Rust Bright MRB only can gives protection towards the metal surface.
Field:- specially designed for removal of rust from any steel surface area and rust stain from Brass , Copper, S.S wood, ceramic and aluminium surfaces, painted or not . And act as surface brightner.
Procedure for Use:-RXSOL-16-1011-020 is highly concentrate
Dilute in water (always use plastic jar and RXSOL-16-1011-020 should be added to water never add water to RXSOL-16-1011-020.)
Surface should be sound clean and free from oil, grease, dirt etc.
Diluted materials apply on rusted area for 15 to 20 minutes then wash off with water repeat if necessary. (For stubborn rusted stains.)
Note:- For steel surfaces; remove oil, grease and old paint. Wet down entire surface with neat Metal Bright- Rx and allow to dry. Second wash may be necessary. Surface should have a grey/white appearance when the Metal Bright- Rx is dry. Steel surfaces will have a resistance to rust and will render a good base for paint. For removal of rust stains on painted surfaces and wood, Metal Bright Rx should be applied at full concentration for heavy stains, or diluted to 20-50% for light stains. Allow to soak for 15 to 30 minutes and wash off with water. A second application may be necessary to remove the stubborn stains.
Spraying Direction: – Using an empty / clean 210 liter drum, fill with 190 liter of fresh water and add 20 liters of Metal Rust Bright This makes a 10% solution, which can be sprayed onto areas in coated tanks where rust stains are showing and over actual rusted areas. Once spraying is completed, wait 20-30 minutes and fresh water rinse with lots of water, if possible use butterworth machines for a more efficient result. This method can be used in stainless tanks to “freshen up” the look of the stainless materials. Make sure to rinse the tank very well, as residual detergent within the Metal Rust Bright will show up in a Wall Wash.
Injection– Not suitable.
Re-circulation: – When hand spraying is inadequate (too much area to cover), prepare a 2% - 5% solution in the tank using fresh water, heat solution to 50o C, then circulate the solution through Butterworth machines for 3 x 45 minutes drops minimum. When using fixed machine recirculate for a minimum of 3 cycles. Rinse out the tank using hot seawater 85o C for 2 hours making sure that there is no form remaining in the water at the pumpstack drain cock. After the hot wash, the tank must be rinsed with fresh water and dried.
* If the mixture is allowed to overheat, it will soften epoxy / phenolic coating. *
Use a strainer at the pumpstack when circulating any solution. Tank Lining – Stainless / Epoxy, Phenolic
Metals Rust Clean Bright is Cargo hold and Tank cleaning chemicals. Which is also useful products for Deck and maintenance cleaning and rust removing.
Specially designed for removal of rust from any steel surface area and rust stain from Brass, Copper, S.S, wood, ceramic and aluminium surfaces, painted or not. And act as surface brightner. Also acts as the rustproofing agent before the application of paint or coatings. It is non-flammable. Prevents further rusting.
Metals Rust Clean Brighte is one of popular maintenance and cleaning chemicals in marine, shipping lines and oil field industries. You shouldn't use Acid like, vinegar, or HCl on rust to clean it because, although it initially dissolves the rust, it leaves the steel very active and prone to immediate re-rusting ("flash rusting"). What you want is Rust remover like Metals Rust Clean Bright and Rust Converter, which is phosphoric acid based detergent which has the capability of converting the dusty, flaky red rust to stable "black rust". In general Alkalis like lye also peoples are using which is good at dissolving oil and grease, but don't convert rust so metal starts immediate re-rusting.
Dont expose your precious metal parts to any chemicals, Many chemicals supplier only engaged to provide cheaper solution doesn't know chemistry of rust. Rust Dissolving is chemicals process, Metals Clean Bright is combination of Corrosion Inhibitor, Phosphoric acid, Proprietory blend of detergent and most important things Buffer mixture which is stands to protect metal against acid attack.
We are not only sailing product in large scale, but also building strong relation with our users. Our daily study and knowledge in chemistry given us opportunity to develop and research many new products. We are bounded to provide best product to our customer.
1) pH 7.0 indicating balance of H+ or OH- .
2) pH less than 7.0 there is an excess of H+, the lower the pH, the more H+.
3) pH over 7.0 there is an excess of OH-, the higher the pH, the higher the OH- concentration.