Product Notes
- 7870743 reads
Application-METHOD:- ( Dose Rate )
1)BY WASHING MACHINE : For direct injection into tank This will require a solution strength between 0.03 and 1.5%, (0.3-15 lts per thousend lts of wash water).
2)BY RECIRCULATION METHOD : Working strength should be 0.05 and 1% ( 0.5–10 Ltres per ton wash water ) by weight in fresh water , based on capacity of the equipment . This solution can be re-used until no longer effective.
3) Spot cleaning. RXSOL-20-3022-025 can be hand sprayed neat or diluted up to 5 parts water and allow 15 to 20 minutes contact time to penetrate deposits . Finally wash off with water jet . The best results will be obtained when wash water is heated to 40-60°C .
A versatile cleaner which can be used for Tank or general cleaning.
MANUAL DEGREASING : May be applied neat or diluted with water up to 1 part to 15 – 20 parts by using a cloth ,brush or spray. After use as an engine room cleaner, bilge slops must be allowed to separate for at least 3 hrs before passing through an oily water separator.
Tank & BILGE CLEANING :RXSOL-20-3022-025 is recommended for any of the standard tank cleaning methods including ship motion , pressure spray washing and recirculation method after mineral, animal, fish and vegetable oils.
Excellent for use with pressure - washing equipment and for industrial application. It is suitable for stainless steel tanks having, epoxy / phenolic linings
Environmentally safe .
Highly effective Water-based degreaser.
Ingredients are all biodegradable
Non-flammable , Pleasant citrus odour.
Highly cost effective concentrated cleaner Very economical dilution rate, 1 to 15 parts of water.
Can be used as Accommodation cleaner for bulkheads, decks and toilets. Compatible on most types of plastics and vinyls floor
NOTE : FOR Hydrocarbon freeing after cleaning with hydrocarbon solvent cleaners like Sea cleaner ( RXSOL-20-2002 ), Tank clean (RXSOL-20-2001 ) and OSD (RXSOL-17-1012) etc .
