Product Notes
- 7920077 reads
Application-METHOD
(DoseRate)
| BY WASHING MACHINE | : | For direct injection into tank This will require a solution strength between 0.03 and 1.5%, (0.3-15 lts per thousend lts of wash water). |
| BY RECIRCULATION METHOD | : | Working strength should be 0.05 and 1% ( 0.5–10 Ltres per ton wash water ) by weight in fresh water , based on capacity of the equipment . This solution can be re-used until no longer effective. |
| Spot cleaning | : | RXSOL-20-3001-025 can be hand sprayed neat or diluted up to 5 parts water and allow 15 to 20 minutes contact time to penetrate deposits . Finally wash off with water jet . The best results will be obtained when wash water is heated to 40-60°C . |
Versatile can be used for tank cleaning or general cleaning , RXSOL-20-3001-210 has numerous general marine cleaning & degreasing applications including the removal of greases, oil, sludge, polymer compounds, carbon deposits, general dirt and grime .Phase separation after cleaning, releasing the oil phase for reclamation .
A versatile cleaner which can be used for tank or general cleaning.
RXSOL-20-3001-210 may be used in all types of cleaning and degreasing operations and is very effective against oil , grease and many other difficult soils .
APPLICATION MANUAL DEGREASING: May be applied neat or diluted with water up to 1 part to 15 – 20 parts by using a cloth ,brush or spray. After use as an engine room cleaner, bilge slops must be allowed to separate for at least 3 hrs before passing through an oily water separator.
TANK & BILGE CLEANING : RXSOL-20-3001-210 is recommended for any of the standard tank cleaning methods including ship motion , pressure spray washing and recirculation method after mineral, animal, fish and vegetable oils.
NOTE : FOR Hydrocarbon freeing after cleaning with hydrocarbon solvent cleaners like Sea-cleaner ( RXSOL SC 2002 ), Tank Cleaner (RXSOL 2001 ) and OSD (RXSOL OD 1012) etc .
Excellent for use with pressure - washing equipment and for industrial application. It is suitable for srainless steel tanks having, epoxy / phenolic linings.
