Product Dose
- 8048137 reads
This is highly concentrate materials in powder form. Make the solution as below -
|
Ferrous Metals |
|
|
Soak Clean Emulsifier PWD |
20 to 75 g/L depending on soils |
|
|
|
|
Non-Ferrous Metals (inc. copper and zinc alloys) |
|
|
Soak Clean Emulsifier PWD |
10 to 60 g/L depending on soils. |
Using Procedure and operting data :
|
|
Ferrous Metals |
Non-Ferrous Metals |
|
Concentration |
20 -75g/L |
10 – 60g/L |
|
Temperature |
50 – 90°C |
50 – 70°C |
|
Treatment Time |
As required |
As required |
|
Agitation Mild agitation is useful to ensure thorough cleaning |
||
Equipmens and Instllation :
Tanks : Mild or stainless steel or other materials suitable for use with alkaline solutions.
Heaters : PTFE, stainless steel or mild steel immersion heaters or steam coils.
It is essential that the tanks to be used for Soak Clean Emulsifier PWD are thoroughly cleaned and leached before any product is introduced.
If in any doubt as to the cleaning procedure please contact Rx Marine International Technical Department.
- ¾ fill tank with water.
- Add the required weight of Soak Clean Emulsifier PWD with stirring to dissolve.
- Make up to final volume with water.
- Heat to operating temperature
This is highly concentrate product use for cleaning of ferrous and non ferrous metals. Easly emulsify and removing the oil and grease , from machinery.
Future and Benefit :
- Suitable for rack and barrel operation.
- Versatile - ferrous and non-ferrous metals can be cleaned.
- Economical - long life and effective cleaning.
- Emulsifies and saponifies oils to prevent oil flotation.
