Product Dose
- 7987592 reads
This concentrated cleaner may be diluted with one hundred parts water, depending on the condition of the surface to be cleaned. Extremely severe conditions may allow only a 10 to 1 dilution. Brush or spray solution on surface to be cleaned, working from the bottom up. Allow to remain wet for three to five minutes then high pressure rinse thoroughly. Use plastic pails or automatic injectors for mixing or applying solutions. Always test on hot surfaces.
ATTENTION:
If product must be used near glass, cover glass with oil first. However, user does so at own risk. This product will etch glass. Do not mix this cleaner with any other cleaners. Do not use on polished aluminum.
SAFETY:-
This product contains sulfuric and fluoride based acids. Causes skin and eye burns. Use eye protection and rubber gloves.
